Installation of ABA_PLUS 100
Hello,
I'm using OSS 626311 to try and install the ABA_PLUS 100 add-on but can't find the installation package. I have support packages SAPKGPBA01 --> SAPKGPBA20 but can't find the Installation package. Does anyone know where this would be or how I could find it??
The note says to unpack KGEB01G.SAR but there is no mention of this Service Marketplace.
Thanks,
Kye
Hi
ABA_PLUS 100 is a licensed SAP product.
You have to contact your SAP person for that.
Similar Messages
-
Oracle 11g R2 Windows Installation hangs at 100%
hi ,
I am trying to install oracle 11g server on a laptop with windows xp sp3 - 32 bit.
the installation goes smoothly till 100% and then get stuck at stage:
spawning 'D:\app\sujrai\product\11.2.0\dbhome_2\ODP.NET\bin\2.x\OraProvCfg.exe /action:config /product:odp /frameworkversion:v2.0.50727 /productversion:2.112.1.0'
I tried few times but it fails over and over again at this same stage. I am instaling in d:/ drive
Never faced this issue before. Would appreciate any comments on this.
thanksHi;
Please check log file for details. What is your xp version? Home version is not supported
Regard
Helios -
Final Cut Studio Installation Hangs at 100%
I am in the middle of installing Final Cut Studio 2 and the intaller seems to have stalled. I inserted the Live Type Media 2 disk and the installer reached 100% of that portion and has not budged for 2 hours. It says 1 hour 11 minutes remaining.
The is a kbase article that says it is OK for the install to stop at 100% for a few minutes
http://support.apple.com/kb/TS2114
But I have been waiting over 2 hours. Should I force quit the install? If I do, how do I reinstall correctly?
Thank youI'd think you're OK so far. The applications are actually installed already if you got that far. What isn't installed are the templates... they can be installed after the fact so I'd think you could quit, look to see if you have the LiveType templates (look in the file menu in Livetype). If they are there, you can just put disk one in the machine, and turn off all other installs save the disks that you didn't get to yet. Again, they are just the templates and media for Motion DVD sp etc... the apps are all installed from the first disk.
Jerry -
Grid Control installation hangs at 100%
I am trying to install GC for the first time. I am at "Install" screen at 100% and "Configuration Pending" ... hanging since yesterday. Except Help button all other are disabled (grayed out).
Idea?
Oracle Linux 4.8 x86Here is link to the picture.
[http://i890.photobucket.com/albums/ac106/mishomor/errors/100percent_error.jpg]
Last few lines of log as well.
INFO: cf session retrieved for key: db10g oracle.sysman.top.em_seed
INFO: Created a new file /u01/oracle/OracleHomes/db10g/cfgtoollogs/configToolAllCommands
INFO: Since the option is to overwrite the existing /u01/oracle/OracleHomes/db10g/cfgtoollogs/configToolAllCommands file, backing it up
INFO: The backed up file name is /u01/oracle/OracleHomes/db10g/cfgtoollogs/configToolAllCommands.bak
INFO: ca page to be shown: false
INFO: exitonly tools to be excuted passed: 0
INFO:
*** End of Installation Page***
The installation of Oracle Enterprise Manager Repository Database was successful.
INFO: Path To 'globalcontext.xml' = /u01/oracle/OracleHomes/db10g/install/chainedInstall/globalcontext -
What is included in my installation.
Hello,
We inherited an SAP 4.7 system. We have licenses for the mySAP Business Suite. I would like to know what exactly I have in my existing installation. For example, do I have Supply Chain Management? How do I see which modules my mySAP suite has? Or it has everything built in by default?
Please answer ASAP.
Thanks
GalinaHello, Pravan
Yes, I have the completed installation. When I look for the System/Status I see the following:
SAP_BASIS 620 0060 SAPKB62060 SAP Basis Component
SAP_ABA 620 0060 SAPKA62060 Cross-Application Component
SAP_APPL 470 0026 SAPKH47026 Logistics and Accounting
SAP_HR 470 0059 SAPKE47059 Human Resources
ABA_PLUS 100 0016 SAPKGPBA16 PLUGIN ZU ABA_PLUS
EA-IPPE 200 0013 SAPKGPIB13 EA-IPPE 200 : Add-On Installation
PI 2004_1_470 0013 SAPKIPZI5D R/3 Plug-In (PI) 2004.1 for R/3 Enterpri
PI_BASIS 2005_1_620 0009 SAPKIPYJ59 PI_BASIS 2005_1_620
EA-APPL 200 0007 SAPKGPAB07 SAP R/3 Enterprise PLM, SCM, Financials
EA-DFPS 200 0007 SAPKGPDB07 SAP R/3 ENTERPRISE DFPS
EA-FINSERV 200 0007 SAPKGPFB07 SAP R/3 Enterprise Financial Services
EA-GLTRADE 200 0007 SAPKGPGB07 SAP R/3 Enterprise Global Trade
EA-HR 200 0011 SAPKGPHB11 SAP R/3 Enterprise HR Extension
EA-PS 200 0007 SAPKGPPB07 SAP R/3 Enterprise Public Services
EA-RETAIL 200 0007 SAPKGPRB07 SAP R/3 Enterprise Retail
If I had SCM, how would it look? What is the abbreviation for that component, would it be a completely separate instance or not?
Thanks
Galina -
Problem with OBI Apps v7.9.5 installation on WinXP SP2
We are attempting to install OBI Apps v7.9.5 on a WinXP SP2 machine. However, upon clicking the setup.exe file, we get the following error message -- Unable to load the launcher file index. Invalid file type in the index.
As a pre-requisite for OBI Apps, JDK 1.5.x and OBIEE v10.1.3.3.1 have been installed without any issues. Hence, not sure why we are getting the above error for OBI Apps. We have searched Oracle documentation, blogs and forums, but not found any reason or solution to this problem.
Any inputs will be greatly appreciated.
Thank you..
Edited by: OBIGuy on Nov 2, 2009 1:00 PMThank you for the input. The contents of the installation directory are as below:
Oracle_BI_Applications
|- doc (folder)
|- createResponseFile.bat
|- installWithResponseFile.bat
|- media.inf
|- setup.exe
|- setup.jar
|- version_apps.txt
Before posting this query, I did run the setup.jar file. However, when the installation process reaches 100%, it terminates with the following error - */version_apps.txt does not exist*. Also, it rolls back the complete installation, so I do not get the OBI Apps files/directories such as DAC, dwrep, RPD, Web Catalog zip, etc.
As shown in the directory structure, this file does exist. My guess is - since I am running the JAR file and not the EXE, it is unable to resolve the path of version_apps.txt correctly and hence throws this error. Having gone through related blogs and posts, I understand that OBI Apps can be installed on Win XP SP2.
Any inputs?
Edited by: OBIGuy on Nov 5, 2009 10:15 AM -
Oracle Express Server v.6.3.1.0 installation problem
I downloaded oes6301nt.exe - Oracle Express Server - NT (118MB) from the Oracle web site, unzipped it and start using Universal Installer to install it for stage/product.jar. I specified Oracle Home as OraExpress81 and path as F:\Oracle Express\olap and chose a typical installation.
At about 98% completion, I got an error: Invalid Search Spec or no DLLs found F:\Oracle*.dll on a error meassge box with an OK button. I clicked the OK button and the installation went to 100% and gave me a message "The installatio of Oracle Express Server was successful. I then re-booted the machine.
But when I tried to run the Express Instance Manager, it wouldn't start. It just blinked for 5 sec then quited.
I checked the programs, the installed programs are:
Program -> OracleExpress81 ->Application Development ->INTYPE File Assistant
NetWork Administration -> Net8 Assistant
Net8 Configuration Assistant
Net8 Easy Config
Express Instance Manger
Express Server 6.3.0 -> Express Instance Manager
Express Language reference
Could you please tell me what could probably be wrong with the installation. Thanks for your help in advance.
null<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Christopher McClellan ([email protected]):
Is the Express Agent running ?
Do you have any other Java 'things' on the machine ?<HR></BLOCKQUOTE>
Chris,
Sorry, I gave you wrong information eariler.
I just checked.
Oracle Express Agent Started Automatic
Oracle Express Server 6.3.0.1.0 Manual
OracleOraExpress 81 ClientCache Manual
OracleOraHome81Agent Manual
OracleOraHome81ClientCache Manual
OracleOraHome81DataGatherer Manual
OracleOraHome81TNSListener StartedAutomatic
OracleServiceORACLE StartedAutomatic
OracleWebAssistant() StartedAutomatic
Those are all the services for Oracle.
Any suggestions on how to start the Instance Manager ?
Thanks
null -
Creative Cloud Desktop Install Reaches 100% then Starts Over
With Adobe Creative Cloud Desktop, it launches and logins just fine, detects my installed apps and shows updates and all apps that are not installed yet. When I click Install on any app, it will download, then initializes the installer. When the installation progress reaches 100%, it starts over again with the installation progress at 0%. I have let Acrobat XI Pro go through 5 "installations" now and each time it reaches 100% then starts over.
Steps takens already:
-Rebooted
-Reinstalled Creative Cloud
-Deleted folder: C:\%AppData%\Local\Adobe\OOBE
-Removed everything in: %temp%
-Verified that my firewall policy is permitting all ports to *.adobe.com*/* and to *.adobelogin.com*/* (Per the Adobe IT Deployment article for URL's and Ports to allow)
-Verified there are no packet drops during the "download" that could cause a bad installation
-Verified my local security (Kaspersky) is not blocking anything Adobe related...but that does not apply since Creative Cloud is already installed and is an allowed process for all sub-threads
Please help!
Thank youJim,
You are a lifesaver! I can't think of how many additional hours of frustration you just saved me - but Thank You!!
After posting, I had determined (like you said), that Explorer must be doing that for a reason. I created a new user profile on the system (added a user temporarily) and observed the same behavior of Windows Explorer (stopping/starting) but then continuing to work as it should. At that point I knew the answer was somewhere in the user's profile but I would have had no idea where to look. The opm.db file was indeed the culprit.
I sure do appreciate the excellent help.
Jay -
Solaris 10 11/06 installation problem?
hi,
i am new to solaris and just started to install the solaris 10 11/06, the partition for solaris installation is the first primary partition, auto slices was 4,4 GB for /, 1,4 GB for ovarlape,10 GB for /export/home and 500 MB for swap but i customized just for 2 slices one / 14 GB and other swap 660 MB, the installation process completed 100% but then hanged with this error messages:
Installing boot information:
-Updating boot enviroment configuration
-Installing boot blocks (c0d1)
-Installing boot blocks (/dev/rdsk/c0d1s0)
connot open/stat device /dev/rdsk/c0d1s2
ERROR: installboot (1M) failed
ERROR: could not install boot blocks
i pressed the reboot button and got the black screen with this message:
Bad PBR Sig
I wiped the installation again and want to install but waiting for help please:
First what all that error means?
Second where is my installation mistake to solve that?
Third is / and swap enough for installaion or use the auto layout of solairs as i mentioned above?1-Make the Solaris partion "the only" active partition
2-Boot up the system in single user mode, mount "a"
3-Install solaris grub on mbr (/a/sbin/installgrub -m /a/boot/grub/stage1 /a/boot/grub/stage2 /dev/rdsk/<slice>) (i like solaris bundled version of grub :) )
before 3, make sure you got the entries for any other operating system/sytems in your active grub's /boot/grub/menu.lst file to be added to solaris's menu.lst file later.
Reboot, edit menu.lst as necessary.
Good luck. -
4.6b ides installation-users cration
Hi
i am new to SAP installation.i have 100% succeeded in installation.
but i couldn't create new program after login.
i have logged in using
client:000
user:DDIC
pwd:19920706
language:EN
after this any transaction code is not working.
like i gave SE38 and i gave a new program name and clicked for "create".
but its is saying like "user DDIC may not make changes in customer systems".
could you please tell me what are the steps to be followed
to work on sap.
thanks
chethuHi Chethu,
Welcome to SDN!
You can create a new user by copying from ddic. Use the
SU01 tcode and copy(shift+f5) from ddic. Provide initial
password and then login using the user created. Then try
creating a new program. It should work.
Regards
Srikishan -
Flash Player does not stay upon Installation
Hi, can someone please give me some advice for fixing this problem?
I use IE8 on a Windows 32-bit system. I was recently prompted to install Flash, though I've never had any problems with it previous to this prompt. Upon looking, all of the Flash animations I attempted to view were nothing but a white box. I went to the Adobe site and attempted to install the newest Flash, but the installer froze at 100% every time.
I used a custom installaion, choosing Windows as my operating system and IE as my browser. It finished installing, and once I was redirected to the Adobe site, the Flash animation played telling me it had been properly installed.
Flash worked perfectly fine until I closed and re-opened IE8. Suddenly, it was like Flash was never there. No animations would play, once again, though the Flash Player 10 ActiveX file was still in the Control Panel.
I have tried almost every fix I have seen for problems with Flash including the manual installer, but none of them have given me any results. Can someone please help with this issue? Thanks in advance.Hi, .
Ok, so you have the version 10.3.181.14 Installed now, that was the best way to do that. I'm sure you checked the Shockwave Flash Object to make sure it was Installed and Enabled. Also that it is the same FP version.
I had previously mentioned the UAC(User Account Control) I've seen a few threads that before the FP 10.3 version that it was performing as it should, but since it doesn't appear to be. So I'd like you to turn if OFF and see if that makes a difference.
Let me know,
Thanks,
eidnolb -
Audition 3.0 installer under Win7 64-bit fails with "problem while extracting files"
I'm having trouble installing Audition 3.0 on Windows 7 64-bit.
I downloaded an installer for Audition 3.0 (called ADBEAudition_WWEFGJIS.exe, 352 MB).
This installer runs but when the progress bar is at the far end, it raises a dialog saying "A problem occurred while extracting some files. Check available space on your computer and the write privileges on the destination folder."
At this time, the main installer dialog shows 100% completed and displays the filename "...\Audition 3.0\Adobe Bridge CS3\redist\WindowsXP-KB898715-x64-enu.exe". I don't know whether this filename is related to the problem, it might just be the last file extracted.
I'm running Windows 7 64-bit on an Asus laptop with 4GB of RAM and an AMD Turion II P520 processor. I don't know whether this CPU is "SSE2-enabled" or not, as specified in the minimum system requirements.
I've rebooted the machine and the problem occurs consistently.
Thanks in advance for any suggestions.
KrisBlueNZHey, I used to have a Diamond PCI card somewhere.
I would say that all bets are off with the drivers, but there is a strong possibility that you could be hearing the problems with the sample rate converter in Windows 7 (and I think in Vista). This affects recording and playback, and the first line of defence is to make sure that the source audio's sample rate is the same as the "default sample rate" that is set in every area in the Windows Control panel audio area.
The sample rate converter built into XP has a range of settings that are usually set to "high quality", and sample rate conversion is rare anyway with that OS. With Windows 7, the concept of the newer Windows mixer irequires that the sample rate converter changes all the audio on the fly to the default ample rate, but the converter is not very good. This doesn't always affect the audio - anything using DirectX seems OK, but anything using "WaveOut" audio (eg YouTube playback) is affected.
Microsoft acknowledges the problem and have issued a patch at http://support.microsoft.com/kb/2653312 -
Computer won't start properly after Leopard installation attempt
Yesterday I tried to install Leopard 10.5.6 on my G5 (currently running Tiger 10.4.11) and ran into a ton of problems. First, a message came up preventing me from upgrading without erasing my hard drive. I decided to quit the installer and back up my drive before erasing it, but after trying to start up again on my main disk, the computer will no longer get past the Apple logo screen. It stays that way for several minutes, and the computer revs and revs until it's at max RPM, then the computer just shuts off. I can't access my data to back it up.
I did some internet research and tried started up from the install DVD again (which still works) and tried to repair my disk using Disk Utility. This didn't work and an error message came up: "Attempted to Repair Disk, attempt failed. Invalid Node Structure, Volume Check Failed. Error: The underlying task reported failure on exit."
If anyone has any advice I would be VERY grateful, I am hoping to not have to have the computer repaired as I already have my other Mac out of service as well and the cost of repair has been high. I need to back up some important files before I update to Leopard, is there any way to do this while starting up from the DVD since my Startup disk doesn't work now? What happened??!!!Is it possible that the piece stuck in the audio jack has resulted in turning off the internal speakers?
I would say that the Leopard installation is not 100%. Sometimes this happens. Or you may have a piece of software installed that mutes the speakers, and it needs to disable that. If it's not the latter, then I would erase the hard drive and reinstall from scratch. If that's not feasible then you can do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
I have windows Vista and IE8. Long story short, I had Adobe Reader 10x installed, went to uninstall then tried to reinstall and am now getting Installation Pending after the Install Manger has downloaded and installed. I did a reset on IE8, rebooted, and then tried the process again but the installation stops after 100% download of the file it will sit there and say Installation Pending. No idea what to do next. Any help or suggestions would be appreciated.
Basically IE is a no-no for downloading reader X. Use other browsers, like Opera, their download manager is less complex compared to IE.
www.opera.com
www.maxthon.com
www.mozilla.org -
Desktop installation fails - MS Office Visual C++ not recognised
I'm trying to install the Blackberry Desktop application on my PC. As the installation reaches almost 100% it says that Microsoft Office Visual C++ 2008 Distributable Pack is required although it has already been installed. Has anyone else experienced this problem and how has it been resolved? Thsnk you
Hi,
Error 1935 HResult- Blackberry Desktop Software v6.01
Microsoft Windows 7 Support Forum
Resolution posted Feb 13, 2011
Microsoft Answers Support Engineer Marilyn:
"I have seen this error occur because of a problem with .NET Framework.
Look at the KB article below:
KB Article ID: 306160 - How to repair an existing installation of the.NET Framework."
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.
Maybe you are looking for
-
The other day I was writing an essay while listening to my iTunes. Then all of a sudden, the power of my house went out. When we finally got power back, and I was able to open up itunes, over 700 songs of mine were deleted. When I looked in the trash
-
Switch off imac internal display
Hello, i bought an 24" external monitor yesterday. I want to use that external display only. How can i switch off the internal display of my imac? Lowest brightness and a black desktopbackground are not very satisfying to me . Thank you for any ideas
-
Marketing Document row insert a pop-screen
Hi all, Can anyone tell me whether or not we can create a pop screen (table format) for user to input information to it while entering a Sales Invoice detail. Example: Under the Sales Invoice qty field, after the user enter the qty, I wish to have a
-
Special Characters messingup output
When i spool the output, when we have special characters it taking more space in the spool file and layout is messed-u. Looks like its a multi byte issue set escape \ set echo off set pagesize 0 set newpage none set pause off set heading off set feed
-
I have assisive touch so I cannot use power button on top but my phone wont turn on I tried plugging it in and pressing the home button but nothing is working? please help