Installation of new NWRFCSDK does not work with sapnwrfc-0.19.

Hi,
I was trying to install the new nwrfcsdk and the corresponding ruby sapnwrfc-0.19.
The rfsdk is located in D:\downloadmanager\mwrfcsdk (jsut unpacked it after download from service.sap.com and copied the dll into services32)
Unfortunately this does not work. Do I miss something ?
Any help is appreciated !
Here the errors I get:
I get errors on installation of the sapnwrfc-0.19 like:
D:\rubyy\sapnwrfc-0.19>ruby setup.rb config --with-nwrfcsdk-dir=D:\downloadmanag
er\nwrfcsdk
---> lib
---> lib/sapnwrfc
<--- lib/sapnwrfc
<--- lib
---> ext
---> ext/nwsaprfc
D:/rubyy/InstantRails/ruby/bin/ruby.exe D:/rubyy/sapnwrfc-0.19/ext/nwsaprfc/extc
onf.rb --with-nwrfcsdk-dir=D:\downloadmanager\nwrfcsdk
Modified CFLAGS: -MD -Zi -O2b2xg- -G6 -DWIN32 -D_CONSOLE -DUNICODE -D_UNICODE -D
SAPwithUNICODE -DSAPonNT -DSAP_PLATFORM_MAKENAME=ntintel
Modified CFLAGS: -MD -Zi -O2b2xg- -G6 -DWIN32 -D_CONSOLE -DUNICODE -D_UNICODE -D
SAPwithUNICODE -DSAPonNT -DSAP_PLATFORM_MAKENAME=ntintel
Modified CPPFLAGS: -ID:\downloadmanager\nwrfcsdk/include
Modified LDFLAGS:
Modified LIBPATH: D:\downloadmanager\nwrfcsdk/lib
checking for sapnwrfc.h... no
adding default nwrfcsdk location for headers ...
checking for sapnwrfc.h... no
This will not work - ABORTING because cannot find sapnwrfc.h
setup.rb:658:in `command': system("D:
rubyy
InstantRails
ruby
bin
ruby.exe"
"D:/rubyy/sapnwrfc-0.19/ext/nwsaprfc/extconf.rb" "--with-nwrfcsdk-dir=D:
downl
oadmanager
nwrfcsdk") failed (RuntimeError)
        from setup.rb:663:in `ruby'
        from setup.rb:1279:in `extconf'
        from setup.rb:1270:in `config_dir_ext'
        from setup.rb:1573:in `__send__'
        from setup.rb:1573:in `traverse'
        from setup.rb:1590:in `dive_into'
        from setup.rb:1571:in `traverse'
        from setup.rb:1575:in `traverse'
         ... 9 levels...
        from setup.rb:829:in `__send__'
        from setup.rb:829:in `invoke'
        from setup.rb:776:in `invoke'
        from setup.rb:1619

Hi ,
here the output of the log file:
have_header: checking for sapnwrfc.h... -
no
"cl -nologo -E -I. -ID:/rubyy/InstantRails/ruby/lib/ruby/1.8/i386-mswin32 -ID:/rubyy/sapnwrfc-0.19/ext/nwsaprfc -ID:/downloadmanager/nwrfcsdk/include -MD -Zi -O2b2xg- -G6 -DWIN32 -D_CONSOLE -DUNICODE -D_UNICODE -DSAPwithUNICODE -DSAPonNT -DSAP_PLATFORM_MAKENAME=ntintel conftest.c -P"
checked program was:
/* begin */
1: #include <sapnwrfc.h>
/* end */
have_header: checking for sapnwrfc.h... -
no
"cl -nologo -E -I. -ID:/rubyy/InstantRails/ruby/lib/ruby/1.8/i386-mswin32 -ID:/rubyy/sapnwrfc-0.19/ext/nwsaprfc -ID:/downloadmanager/nwrfcsdk/include -MD -Zi -O2b2xg- -G6 -DWIN32 -D_CONSOLE -DUNICODE -D_UNICODE -DSAPwithUNICODE -DSAPonNT -DSAP_PLATFORM_MAKENAME=ntintel -I/usr/sap/nwrfcsdk/include conftest.c -P"
checked program was:
/* begin */
1: #include <sapnwrfc.h>
/* end */
Regards
Marcus

Similar Messages

I upgraded Safari in my Mac (10.6.8 Leopard) but the new version does not work with my system so that I now have not a working browser. How can I solve the problem and/or install back my previous Safari version?

I have upgraded Safari in my Mac, but the new Safari does not work with my system. So I find myself without any working browser. How can I solve this problem and/or install my previous Safari version?

Reinstall Safari 5.1.10 for OS X 10.6.8: http://support.apple.com/kb/dl1569. Might do the trick.
But, frankly, I don't think that simply reinstalling the old Safari will work because of all the peripheral, under the hood changes that happen when you upgrade from one version of Safari to another. Reinstalling 5.1.10 may be insufficient to turn back the clock. (This is the moment where a Time Machine or another form of full backup would save your bacon.)
While you're getting a copy of Safari 5.1.10, get a copy of Firefox (https://www.mozilla.org/en-US/firefox/desktop/), too, so that you have an alternate browser to use as you're sorting matters.

I just upgraded to Firefox 5. How can I get a copy of Firefox 4. The new version does not work with Skype's auto dialer.

How can I get a copy of the previous version of Firefox? The latest version (5) does not support Skype's auto dialer. I use this tool to be more productive.

Due to security vulnerabilities, rolling back to Firefox 4.0.1 is not recommended.
If Firefox disabled some add-ons (especially extensions), it likely is because they include a list of compatible Firefox versions and haven't yet been updated for Firefox 5. If they worked on Firefox 4, there is a good chance they will work on Firefox 5.
You can force Firefox to ''ignore'' add-on version restrictions by (what else) installing an add-on. Then you can test whether the add-ons important to you actually work in Firefox 5.
[https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/ Add-on Compatibility Reporter :: Add-ons for Firefox]
After you install this add-on and restart Firefox, there will still be a message that "--- is incompatible with Firefox 5.0" but the add-on will be enabled and a Disable button will appear for that entry.
Please report back on your results.

New MBP Does not work with wifi after migration assistant.

Old Mac book did'nt Play well with some wifi got new one and it worked fine. Migrated preferences from old MBP to new now we one has the same issues?

This is what I've been telling people. When you migrate an older system to a newer one you never know what is going to be carried over.
This has been a issue with Windows PCs for a long time.
Best is to copy personal files from old to new. Install programs on the new one and make all changes manually to system preferences.
Good luck hope you get it working.

New Browse does not work with NTLM proxy and Firefox

With the new uploader I cannot upload a file with Firefox and our (NTLM) company proxy. I am prompted for my password, but cannot enter it correctly for a reason.
However the normal attachment functions still works.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Bump
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

CHROME is not compatible. Problem Solved: PayPal's new interface does not work with CHROME.

I've been trying to withdraw funds for days on my Chrome browser. I was about to throw my laptop out of the 3rd story window when I thought to try Firefox and it worked. I pray that someone in programming reads this. Note to Developers: PLEASE don't do major interface overhauls if your site is funcitonal. I have never seen a site get better after an upgrade. We don't care if PayPal looks hip. We want it to be a reliable tool for our businesses.

Yes... BUT there is large "Chrome" oriented large yellow note at the top of your accounts page that says ... this site uses Silverlight which will soon not be supported... So if you are using Chrome what are you doing when they remove Silverlight support? RSVP to my email on my account please. or... Post a note of yours that tells all of us what you recommend... go back to IE?

New SSE2 Does not work, with old computer!

Had to reload Norton, Got a popup reading... your processor is not supported!
So I downloaded, the earlier version and updated it to 21.7.0.11 which ran fine! The issue now is, the software keeps asking me for the activation code? Downloaded off of Norton, but subscription through Comcast!          Maybe I should just get AVG? Or maybe it is time to upgrade, miss my XP

Ok, I’ll give it one more shot, with links!
I log into my account on Comcast, then go here!
https://constantguard.xfinity.com/
I then click on Norton Security Suit, for Windows!
Which gives me this popup screen…
You are now leaving the Constant Guard website
You are now being directed to a secure website to download the Norton Security Suite software.
To return to the Constant Guard website, please click the "back" button in the upper-left corner of your web browser.
I then click and it takes me to…   Norton Security Suit download page!!!
Which address shows as     https://webdl.symantec.com/
Its download button reads,
Norton Security Suite
PIN : 9***********X
So then I click on START DOWNLOAD!!!
A popup with the NORTON DOWNLOAD MANAGER.EXE appears and I click save!
The file is downloaded, I open and run… Surprise, and it's back to my original post!!!
Popup reads, unsupportive processor, so I click on SSE2 Support, page opens to the same link that I spoke of and that you had posted earlier...   https://support.norton.com/sp/en/us/home/current/solutions/v101962385_EndUserProfile_en_us
Which, again is the place that I downloaded the earlier versions, as you can see about midway down...
Download the latest compatible version
Depending on your Norton product, download the latest version (21.7.x.x):
Norton AntiVirus
Norton Internet Security
Norton 360
Norton 360 Premier
After you install the Norton product, run LiveUpdate until all updates are installed.
This is the the page they and you directed. I clicked and downloaded this Norton 360 So now it is asking me for the key??? That is the one you told me to download???

The new version does not work with joomla

When I am asked to upgrade my firefox version (to 3.6) I cannot do certain functions with my joomla template. Example; I cannot upload any images. I have to convert back to the 3.5.9 version in order to do this task. I need help. I want the upgrade, but I cannot afford to lose any functions in order to up date my site.

Use the Mozilla FTP: ftp://ftp.mozilla.org/pub/firefox/releases/

Can I load the older version of Firefox? The new version does not work with my company's software. Need prior to 3.6.24

We have some old Ariba software and later versions of the browsers make it impossible to complete the process.
Just wondering if I can download the older version of Firefox, one prior to 3.6.24.

Use the Mozilla FTP: ftp://ftp.mozilla.org/pub/firefox/releases/

Lightroom 4 Does not Work with plugins

I installed my Lightroom 4 upgrade yesterday and I like the changes. However, the new program does not work with any plugin including Elements, NIK software and others. Adobe should not have released the full program until they had ensured that all will work.
I have a MAC OS Lion. I went to the NIK homepages and followed their instructions to uninstall all prior versions and download the latest version of their software to install. I followed these directions and nothing happened. So I tried Adobe's own plugin, Elements 9, and that too did not work. Then I tried a few others I have from OnOne and other developers, but nothing works.
Then I called Adobe where a recording told me they are very busy with complaints about Lightroom 4 and hung up. Then I tried to get a tech rep to chat with me, but got the same results as I had gotten with my call.
Why does Adobe sell a product that fails such a basic issue? Why did they not work it out with the Beta edition before selling the progrm? I understand why Beta programs often have trouble, that's why they are Beta, but I do not understand why Adobe would sell a flawed product and then prevent their customers from getting tech help.
Ed

Actually, the LR4 beta worked fine with respect to this issue. It wasn't until the full version was released that some people started experiencing the problem of being unable to access the external editors and plugins from LR.
The problem is being worked on, according to a reply on the feedback forum:
http://feedback.photoshop.com/photoshop_family/topics/lr4_external_editor_failure

New Applications model DOES NOT work with StandAlone OSD media

If you are able to create StandAlone OSD media, the new Applications model DOES NOT work with it.
- The creation of the media will be successful
- The application installation itself will be successful
Yet after the application is installed, it shows the correct process it needs to complete based on the return code in AppEnforce log, but does not process that information back to the the TS Manager so it appears to attempt to download a policy which fails
causing the task sequence to error out..
Thanks,
Squirre1

It is very similar to this description:
http://madluka.wordpress.com/2012/05/15/error-0x8000405-when-installing-applications-to-a-workgroup-system-during-build-and-capture-task-sequence/
It is using the application model, since it is not attached to the domain it is on a workgroup. But it is on standalone media and not during a build and capture sequence, it is during an OSD. But alot of the same puzzle pieces fit. Basically pointing to
the new applications model not working during standalone OSD when the MP is not available. i would say that not enough information is getting encapsulated into the Application when exported onto the StandAlone media.

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

Please check the Play Store app for any Flash updates and install them if present.

Home sharing does not work with new mountain lion update.

home sharing does not work with new mountain lion update. Does anyone else have the same issue. Updated all computers in my home, deauthorized and reauthorized each computer. turn off home sharing and turned it back on. don't know what else to do..please help...

Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

I had an iphone 4s and it worked nice with facetime and imessage using my phone number but it was stolen on December so I buy a new iphone 4s using the same cellphone number but now imessage and facetime does not work with my number, it only works with

I had an iphone 4s and it worked nice with facetime and imessage using my phone number but it was stolen on December so I buy a new iphone 4s using the same cellphone number but now imessage and facetime does not work with my number, it only works with my apple ID. Please Help me I speak Spanish so if my English is not ok I´m sorry about it.
Do you think that apple has to reset in their database of the old serial number attached with my phone number and that’s why I can´t activate imessage and facetime with my number in the new iphone 4s??

I understand all of this Meg; that is why I bought an Iphone; but never expected my phone not even give a at least a 24 or even 12 hours....I work 12 hour shifts and also would expect to have to charge each night but not twice a day or more. I am not always somewhere I can charge my phone.
Your points are true; however it doesn't help me......

Fast dial (visual bookmarks) does not work with the new 5.0 upgrade. How do I correct this issue

fast dial (visual bookmarks) does not work with the new 5.0 upgrade. How do I correct this issue Asked this question yesterday. I desperately need info, will I ever be able to use fast dial again?

I tried it and it WORKED....I even tried the other version BEFORE this one and it didn't work so I tried yours and it worked like a charm so THANKS brother....

Installation of new NWRFCSDK does not work with sapnwrfc-0.19.

Similar Messages

Maybe you are looking for