Installation osx very slow on my core 2 duo 2 ghz and stops
Hi,
When I do a fresh install of OSX from the DVD, the installation process takes well over one hour.
The first step, checking the DVD also takes very, very long.
When I insert the second CD, the installation stops at the point of installing iDVD.
Does someone have a clue what is going on and what I should do about it?
Jochem
The first disk installed smoothly and in about the same time as it always does, in proportion to the speed of the box/DVD drive. The second disk starts off fine, then begins to show longer and longer "time remaining" — 14 minutes, 18 minutes, 24 minutes, 41 minutes, etc. before eventually failing.
The point of failure was inconsistent. Sometimes it would process for 10 minutes before spiraling; sometimes it would fail in less than five. There were no other unusual symptoms, such as a unusual HD or DVD drive noises.
Similar Messages
-
Safari is running very slow. I have cleared cache, reset safari, and added DNS Servers 208.67.222.222.
Mac Mini connected directly to modem by ethernet cable. Ipad loads same web pages much faster. Again thanks for help.
Hardware Information:
Mac mini (Mid 2010)
Mac mini - model: Macmini4,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
Video Information:
NVIDIA GeForce 320M - VRAM: 256 MB
Startup Items:
HP Trap Monitor - Path: /Library/StartupItems/HP Trap Monitor
System Software:
Mac OS X 10.6.8 (10K549) - Uptime: 0 days 3:59:25
Disk Information:
Hitachi HTS545032B9SA02 disk0 : (298.09 GB)
(null) (disk0s1) <not mounted>: 200 MB
Macintosh HD (disk0s2) /: 297.77 GB (280.4 GB free)
HL-DT-STDVDRW GA32N
USB Information:
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
HP Photosmart D110 series
Logitech USB Receiver
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
Problem System Launch Daemons:
[failed] com.apple.suhelperd.plist
[not loaded] org.samba.winbindd.plist
Problem System Launch Agents:
[failed] com.apple.Kerberos.renew.plist
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
Launch Agents:
[loaded] com.hp.help.tocgenerator.plist
User Launch Agents:
User Login Items:
iTunesHelper
HP Product Research
HPEventHandler
3rd Party Preference Panes:
Flash Player
Internet Plug-ins:
Flash Player.plugin
FlashPlayer-10.6.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
QuickTime Plugin.plugin
Silverlight.plugin
User Internet Plug-ins:
Bad Fonts:
None
Top Processes by CPU:
4% EtreCheck
4% Safari
3% WindowServer
2% syslogd
1% fontd
1% activitymonitord
0% Activity Monitor
0% hpdot4d
0% mds
0% mdworker
Top Processes by Memory:
221 MB WebProcess
85 MB Safari
51 MB WindowServer
51 MB Mail
37 MB Finder
31 MB mds
27 MB coreservicesd
23 MB HPEventHandler
16 MB HPIO Trap Monitor
16 MB mdworker
Virtual Memory Statistics
619 MB Free RAM
755 MB Active RAM
233 MB Inactive RAM
185 MB Wired RAM
200 MB Page-ins
0 B Page-outs -
Suddenly, time machine is very slow. Used to take up a minute and now more than half an hour. Does anybody know how this can happen? Indexing the back-up disk is off, but Timde Machine keeps on indexing!
same issue here...
-
Question
The first time I start Firefox it is very slow coming up but after it is up and I want another window it fast again. What do I need to do to clean out whatever is clogging it up. edit* The first time you start up any application after turning on your computer is called a cold start, which is why Firefox takes a while to load right away. (I've noticed that future versions of Firefox start up faster on a cold start then Firefox 5.0.1.) Also, a lower amount of RAM could be slowing its start-up down since Firefox is kind of memory hungry.
* As for the second part of your question, press ctrl,Alt, and the delete keys on your keyboard. The Windows Task Manager should start. Go to the processes tab and look for 'firefox.exe'. Right click on the firefox.exe and click 'End Process'. Hit Yes and wait for a minute.
* Then opening Firefox again.
Hopefully this helped somewhat! -
What kind of charger do I need for my macbook core 2 duo 2 ghz.
What kind of charger do I need for my macbook core 2 duo 2 ghz. I just bought one used that didn't come with a charger.
There's 8 different models of MacBooks that are 2.0Ghz. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion).When System Profiler comes up check the Model Identifier.
You can get a new power adapter on eBay forabout $20
http://www.ebay.com/sch/i.html?_nkw=macbook+power+adapter&_sacat=0&_sop=12&_dmpt =Apple_Laptops&_odkw=macbook+power+adapter&_osacat=111422&_trksid=p3286.c0.m270. l1313 -
Thin Installer is very slow with SCCM Task Sequenz
Hi all,
I configure the Driver Update with Thininstaller via SCCM Tasksequenz and it is working fine, but very very slow.
It is so slow because all Thininstaller log lines were pass throuh to the SMSTS.log. (Task Sequenz log file).
It means the SMSTS.log has the same content as the Thininstaller log. This makes the task very very slow. If I run the Thininstaller manually with the same command line (without TaskSequenz), it is fast as expected.
Any Idea how to disable the log pass through from Thininstaller?The repository is a network share on a Windows 2008R2 server, connected through gigabit network. The server doesn't have basically any load. Mapping the network share either directly to the network share or as an SCCM package does not affect performance, it always takes around 45min.
In the repository there are around 200 packages (about 25 computer models). Thin Installer is run by using two SCCM packages. First of them contains the Thin Installer application files and a cmd file with only one line:
xcopy "%~dp0*.*" C:\Windows\ThinInst /E /Z /Y /I
So, that copies Thin Installer files to local computer. Second package is the driver store, and it also includes a cmd file to run Thin Installer:
%windir%\Microsoft.NET\Framework\v2.0.50727\CasPol.exe -pp off -m -ag 1.2 -url file://%~dp0* FullTrust
C:\Windows\ThinInst\ThinInstaller.exe /CM -search A -action INSTALL -noicon -includerebootpackages 1,3,4 -noreboot -repository %~dp0
I was now reading ThinInstaller log files, and it kinda looks like it just sits and waits for something for half an hour in the end..
--- clip ---
Severe 2011-10-03 , 02:35:07
at Tvsu.Engine.DataBase.DeleteUpdateXmlInformation()
Message: Processing the Update: 83wo13ww
Info 2011-10-03 , 02:35:07
at Tvsu.Environment.EnvironmentManager.closeEM()
Message: Closing Environment Manager.
Info 2011-10-03 , 02:35:07
at Tvsu.Sdk.SuSdk.ShutDownApplication()
Message: Shut Down the Application
Info 2011-10-03 , 03:05:06
at Tvsu.CommandLine.CommandLineParameters.StartCommanLineParameters(String[] arguments)
Message: Packages found, and balloon been suppressed
Info 2011-10-03 , 03:05:06
at Tvsu.CommandLine.CommandLineParameters.StartCommanLineParameters(String[] arguments)
Message: Installation succeeded, and reboot been suppressed
--- clip --- -
Navigate away from site with flash under Firefox4 + OSX, very slow. Bug?
I have problem to navigate away from a page with flash under Firefox4 + OSX. Very slow (takes 30-60 seconds after clicking on a link). No problem in Win/Ubuntu with Firefox4. No problem with Firefox 3.6 or other browsers under Win/Ubuntu/OSX.
When you say you play it, in either Captivate or Flash, do
you mean
locally or that you upload it somewhere and play it back
through a web
browser from that website location?
If the former, then I'm not sure. If the latter, sounds like
the images
are Very Large and it's taking a while for them to download
in order to
play...but once they're downloaded and 'cached', the file
plays quickly.
How large are your published SWFs? What format are your
images? What DPI?
Erik
Kim979 wrote:
> When I test the movie in Flash it plays
> slow once and then really fast after that.
> I saved it and imported it into a captivate project and
the same thing is
> happening. It plays really slow and choppy. If I
navigate away from the page
> and then come back to it, it plays really fast
Erik Lord
http://www.capemedia.net
Adobe Community Expert - eLearning
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
Authorware Tips! -
If I go in using safe mode the menus work fine. If I don't the time it takes to get the sub-menu is several minutes. I've tried "disabling the add-ons" and "resetting the controls" but that doesn't affect it. It is still slow if I'm out of safe mode. I've also tried uninstalling and reinstalling it. And I've tried deleting the "Program Files" directory it occupies in-between uninstalls and installs, too. I've also tried getting rid of Firefox and the Mozilla Maintenance Service at the same time, too, just in case. Nothing works.
I get the following error if I look at "the console": mutating the [[Prototype]] of an object will cause your code to run very slowly; instead create the object with the correct initial [[Prototype]] value using Object.create
resource://gre/components/steelApplication.js Line 783
And I've tried looking at all the other forum posts complaining about this "mutating the prototype of an object" error.
Any suggestions would be appreciated.Same issue reported at https://support.mozilla.org/en-US/questions/1052155 so locking this topic
-
If I go in using safe mode the menus work fine. If I don't the time it takes to get the sub-menu is several minutes. I've tried "disabling the add-ons" and "resetting the controls" but that doesn't affect it. It is still slow if I'm out of safe mode. I've also tried uninstalling and reinstalling it. And I've tried deleting the "Program Files" directory it occupies in-between uninstalls and installs, too. I've also tried getting rid of Firefox and the Mozilla Maintenance Service at the same time, too, just in case. Nothing works.
I get the following error if I look at "the console": mutating the Prototype of an object will cause your code to run very slowly; instead create the object with the correct initial Prototype value using Object.create
resource://gre/components/steelApplication.js Line 783
And I've tried looking at all the other forum posts complaining about this "mutating the prototype of an object" error.
Any suggestions would be appreciated.I had this problem for about a year or so. I can't remember how long I had it. I just began using safe mode all the time, so I could still use Thunderbird. I had already tried what Christ1 had recommended, too ("You can try to disable all extensions and then enable one at a time until Thunderbird starts getting slow again.").
Then one day fairly recently the problem just disappeared. I didn't do anything. I'd been upgrading Thunderbird regularly, all during the time I had the problem, too. And I'd already tried all the various solutions that had been offered on the web. It just magically disappeared one day. Oddly, I was kind of expecting that would happen. I'd just wanted it to work a lot sooner. -
What do I do to check for viruses and or remove them if there is one? I have never had a problem with my mac until now. It is running VERY slow
This is what it came up with.... any ideas?
EtreCheck version: 1.9.11 (43) - report generated May 27, 2014 at 11:07:36 PM CDT
Hardware Information:
MacBook Pro (15-inch, 2.53GHz, Mid 2009)
MacBook Pro - model: MacBookPro5,4
1 2.53 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
System Software:
OS X 10.9.3 (13D65) - Uptime: 1 day 23:26:50
Disk Information:
Hitachi HTS545025B9SA02 disk0 : (250.06 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 249.2 GB (20.75 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-868
USB Information:
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper:
Anywhere
Kernel Extensions:
[not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.39) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.39) Support
Problem System Launch Daemons:
[failed] com.apple.wdhelper.plist
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.macpaw.CleanMyMac.helperTool.plist Support
[loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[loaded] com.macpaw.CleanMyMac.volumeWatcher.plist Support
[running] com.whitesmoke.uploader.plist Support
User Login Items:
iTunesHelper
AdobeResourceSynchronizer
Internet Plug-ins:
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
Flash Player: Version: 13.0.0.214 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
Safari Extensions:
WhiteSmoke: Version: 1.0.0.1
Vidx: Version: 2.0
DivX Plus Web Player HTML5 <video>: Version: 2.1.2.145
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
Move-Media-Player: Version: npmnqmp 071801000001 Support
fbplugin_1_0_1: Version: (null) Support
3rd Party Preference Panes:
Flash Player Support
Time Machine:
Time Machine not configured!
Top Processes by CPU:
12% DashboardClient
6% coreaudiod
6% WindowServer
5% repair_packages
3% VLC
Top Processes by Memory:
549 MB repair_packages
143 MB com.apple.WebKit.WebContent
131 MB Safari
119 MB installd
94 MB mds_stores
Virtual Memory Information:
809 MB Free RAM
1.82 GB Active RAM
224 MB Inactive RAM
630 MB Wired RAM
3.66 GB Page-ins
207 MB Page-outs -
A workaround was suggested by a member of the community to turn off both hardware and Flash acceleration. It worked fine (no crashes since), but runs very slowly. In particular, takes five seconds to exit and is often still listed as a running process. Very slow in connecting to Web pages, and very slow loading them because of the graphics. Very slow in loading video. I expected slower responses, but this is REALLY slow. I'm running 64-bit Windows 7 and an Nvidia GE Force 7800 graphics card with all the drivers updated and the plugins for Firefox mostly set on "ask to activate". Should I expect this much reduction in performance when the workaround I mentioned was put into place? If so, it's half a loaf at best. The only thing questionable is that I have two Youtube downloaders that I am trying, but I made the assumption that these were only applied when you downloaded something from Youtube.
In case you are using "Clear history when Firefox closes": do not clear the Cookies
If you clear cookies then Firefox will also try to remove cookies created by plugins and that requires to start plugin-container processes that can slow down closing Firefox.
Instead let the cookies expire when Firefox is closed to make them session cookies.
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: Keep until: "I close Firefox" -
FireFox VERY slow with Norton Toolbar 4.6 on GMAIL and B of A, etc.
Using XP Pro SP3 and FireFox 3.6.7, but has been slow for a while now. If I disable Norton ToolBar 4.6 (from NIS 2010) it is OK but IE 8 is fine. What happens is that GMAIL logs in and just hangs for a while. Even B of A or the Norton site. Even my ISP's site is VERY slow. A lot of forums are slow as well. Seems like sites that need a log-in have this issue.
== URL of affected sites ==
http://gmail.google.comI had done this and disabled ALL of the addons/plugins, and it was fine. As soon as I enabled the Norton toolbar, the problem was back. I then enabled everything except the Norton Toolbar and it was still good. I believe this is a Firefox issue as IE 8 works well with the Norton Toolbar enabled. I also see this when I go to my Netflix queue. Firefox is very slow while IE 8 shows the list quickly.
-
WARNING! OEM Core 2 Duo E6300 packet as Retail on the market
Source and details: (Unfortunately details isn't available in English yet, but guess soon will be)
find the differences:
http://overclock.ru/hardnews/24020.shtml
http://www.pcpop.com/doc/0/165/165836.shtml
http://www.pcpop.com/doc/0/165/165836_1.shtml
http://www.pcpop.com/doc/0/165/165836_2.shtml
here is similar nice example, guess what is CPU inside, 2 different information on the box:Quote from: BOSSKILLER on 29-November-06, 21:48:25
if that issue exist its random which info is correct, but usually one of it match... best to check on CPU IHS for OPN code. (for me is no guarantee too, cause have case with CPU which OPN code written on the IHS is different in real one, etc: ID by OPN code on IHS should be one type(core), but in reality its different core from expected by OPN, also internal OPN do not match with OPN code on IHS).
That sounds equally bad as well. It's really something obvious that resellers should report to Intel about these sort of issues. Layman users can be easily tricked in such cases as they usually do not know how to check out for stuffs specs. -
Difference in speed between i5 and Core 2 Duo (same GHz)?
My two-year old MacBook Pro has a 2.4GHz Core 2 Duo processor and 4GB RAM.
The cheapest MacBook Pro introduced today has a 2.4GHz i5 processor with 4GB RAM.
Anyone have any idea what the speed difference might be between these two? Approximately?
And does software have to be re-written to take advantage of the i5? In other words: What do I stand to gain if upgrading today?Read this page and it should answer your questions.
http://www.apple.com/macbookpro/performance.html
Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
MacOSG: An Apple User Group iTunes: MacOSG Podcast Follow us on Twitter: MacOSG -
New iMac 27" 3.06GHz Core 2 Duo - Grey bar and yellowing on screen.
Are the problems with the 27" screen only affecting the i5 and i7 versions.
Is anyone experiencing similar (or different) issues with the *Core 2 Duo* versions?
I have faint yellowing in the bottom 3" of the screen, but more worrying is the faint grey shadow bar that runs across the whole screen about 2" up from the bottom which seems to be getting more pronounced.
Does anyone else have this or do I just have a rogue, so far no flickering, no tearing, no shut off?Hi,
I have that faint shadow bar as well 2 inches from the bottom. I cant figure out what causes it. It runs all across the whole thing.
Maybe you are looking for
-
hi hr gurus, plz help we have 3 shifts like 6-2,2-10,10-6. while uploading time data to sap from third party system. do we need to take care of the shifts times in BDC? or do we need to manage it in configurations if you have any code please send me
-
Hi! I hope someone can help me with this. I have done a program in Java-code and now I want to convert that code into an executable file that can be run on most computers. I have tried to convert the code to a JAR-file and then, using the program JSm
-
Different colours - same settings!
Hi. I make my movie and I am doing this: (Sequence1 = S1) (Sequence2 = S2) I export movie from S1 with after effects. I render it and exported via Compressor, settings HDV 1080 50i.. I named it tp08.. After I imported it to S2 and make only some litt
-
Hi guys! I am planning on reinstalling windows on my laptop. I have updated my ipod with all my music, and plan on just copying over the 'control' folder to my newly reinstalled computer. What I am wondering is, when I try to connect my iPhone back u
-
I lost mouse operation all together. on my G5 DP 1.8
I work with a logitech wireless trackball and keyboard that I've had for quite a while, say 9 months maybe 10. They have been flawless, but today, thought the keyboard is working fine, the mouse seemed a little sluggish so I decided to look at the lo