Installation woes with 2008-04-RC & 2008-03

Well, here goes.
Firstly, I installed 2007-08. I assumed this was the most recent, as it was on the main page and all. Install went fine except for the network card, which I eventually fixed by grabbing new drivers (r8168). I tried to install some basic packages and update with pacman, but this turned out to be a disaster, leading me onto 2008-04-RC.
Burnt 2008-04-RC, inserted the disc, and found that it stuck on Udev (can't remember exactly what, but it's that line relating to Udev on boot). Waited ample time and tried multiple times, but it just wouldn't have it. I went to try 2008-03.
I could get to the installer with 2008-03. Trouble is, settings were being saved in <temp dir>/etc/. As such, the files were empty and it also turned out to be a disaster.
I'd really love to install 2008-04-RC (by the way, does this include r8168 drivers? r8169 didn't do it for me), but I've been at this all day with no success. I'm very close to going over to Gentoo, despite remembering how much I loved Arch.
Please, please, could someone help me?
Thanks.

OK, just tried 2008.03 and I was unable to compile the r8168 drivers on it. Any clues as to why this might be? I couldn't save a log, it got cut short to the following:
make -C src/ clean
make[1]: Entering directory `/home/jamie/bla/r8168-8.006.00/src'
rm -rf *.o *.ko *~ core* .dep* .*.d .*.cmd *.mod.c *.a *.s .*.flags .tmp_versions Module.symvers Modules.symvers rset
make[1]: Leaving directory `/home/jamie/bla/r8168-8.006.00/src'
make -C src/ modules
make[1]: Entering directory `/home/jamie/bla/r8168-8.006.00/src'
make -C /lib/modules/2.6.24-ARCH/build SUBDIRS=/home/jamie/bla/r8168-8.006.00/src modules
make[2]: Entering directory `/usr/src/linux-2.6.24-ARCH'
CC [M] /home/jamie/bla/r8168-8.006.00/src/r8168_n.o
make[2]: Leaving directory `/usr/src/linux-2.6.24-ARCH'
make[1]: Leaving directory `/home/jamie/bla/r8168-8.006.00/src'
The errors came afterwards.

Similar Messages

SAP oracle Installation error with Oracle on windows 2008 MSCS

Dear All,
I'm facing an error during SAP cluster group creation.
As per SAPinst steps, During configuration of Frist node its giving error at Cluster group creation.
please find the Log :-
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WARNING 2010-06-17 00:04:39.138
Execution of the command "cluster.exe RESOURCE "SAP OPE 51 Service"" finished with return code 5007. Output:
Listing status for resource 'SAP OPE 51 Service':
Resource Group Node Status
System error 5007 has occurred (0x0000138f).
The cluster resource could not be found.
INFO 2010-06-17 00:04:39.138
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAPJAVA\MSCS-A\cluster.exe.log.
INFO 2010-06-17 00:04:39.153
Output of cluster.exe res "SAP OPE 51 Service" /OFFLINE is written to the logfile cluster.exe.log.
WARNING 2010-06-17 00:04:39.200
Execution of the command "cluster.exe res "SAP OPE 51 Service" /OFFLINE" finished with return code 5007. Output:
System error 5007 has occurred (0x0000138f).
The cluster resource could not be found.
INFO 2010-06-17 00:04:39.216
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAPJAVA\MSCS-A\cluster.exe.log.
WARNING 2010-06-17 00:04:39.231
Execution of the command "cluster.exe res "SAP OPE 51 Instance" /REMOVEDEP: "SAP OPE 51 Service"" finished with return code 5007. Output:
System error 5007 has occurred (0x0000138f).
The cluster resource could not be found.
ERROR 2010-06-17 00:04:39.340
MOS-01242 Windos System error message number: '5013'. Message: 'The cluster group could not be found.'.
WARNING[E] 2010-06-17 00:04:39.356
MUT-03025 Caught ESAPinstException in Modulecall: Windos System error message number: '5013'. Message: 'The cluster group could not be found.'. .
ERROR 2010-06-17 00:04:39.356
FCO-00011 The step CreateFirstSAPGenericServiceResource with step key |MSCS_A|windows|ind|ind|ind|0|0|CreateSAPClusterGroup|windows|ind|ind|ind|11|0|CreateFirstSAPGenericServiceResource was executed with status ERROR ( Last error reported by the step :Windos System error message number: '5013'. Message: 'The cluster group could not be found.'.).
ERROR 2010-06-17 00:04:56.64
FCO-00011 The step CreateFirstSAPGenericServiceResource with step key |MSCS_A|windows|ind|ind|ind|0|0|CreateSAPClusterGroup|windows|ind|ind|ind|11|0|CreateFirstSAPGenericServiceResource was executed with status ERROR ( Last error reported by the step :Windos System error message number: '5013'. Message: 'The cluster group could not be found.'.).
Note:-
entry in net_helpmsg.exe
The cluster group could not be found.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Actually, before starting SAPinst, i had created SAP<SAPSID> service & Application.
i.e.. by creating Empty service and application followed by renaming it to SAP<sapsid> and allocating shared disk and bringing it onlie with file server configuration with in it.
But, i'm facing the error during configuration of First node.
Done with ASCS and SCS .. selecting the correct drive where /usr/sap installed.
i request you to suggest me a solution to fix this problem during installation.
Thanking you in all,
Best regards,
Raghav.

r3Clus.log
17.6.2010, 14:0:53, ntclsapclus.cpp, 213, Entry: InstallSAPResourceType
17.6.2010, 14:0:53, ntclsclinst.cpp, 58, Entry: Sclinstsrct::Create
17.6.2010, 14:0:53, ntclsclinst.cpp, 79, CreateClusterResourceType RC= 183
Cannot create a file when that file already exists.
17.6.2010, 14:0:53, ntclsclinst.cpp, 91, DllRegisterCluAdminExtension RC= 0
17.6.2010, 14:0:53, ntclsclinst.cpp, 102, DllRegisterServer RC= 0
17.6.2010, 14:0:53, ntclsclinst.cpp, 116, Exit: Sclinstsrct::Create RC= 0
17.6.2010, 14:0:53, ntclsapclus.cpp, 215, Exit: InstallSAPResourceType RC= 0

Windows Server 2008 R2 Service Pack 1 installation failed with error code 0x800f0a12

Hello,
I'm facing problem to install windows server 2008 R2 SP1. I cannot install SP1. In this server have running Exchange 2010 server. to update Win2008 R2 SP1 facing the following error:
1. Service Pack installation failed with error code 0x800f0a12.
2. Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Server 2008 R2 Service Pack 1 for x64-based Systems (KB976932).
Please suggest

Please run the system update readiness tool.
http://windows.microsoft.com/en-us/windows7/What-is-the-System-Update-Readiness-Tool?SignedIn=1
Then post the complete contents of;
%SYSTEMROOT%\Logs\CBS\CheckSUR.log
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Oracle Database XE with Microsoft Windows Server 2008 (32-bit)

I would like to find out if Oracle Database XE works with Microsoft Windows Server 2008 (32-bit)?
If not, is there any other Oracle Open Source Database version can work with Microsoft Windows Server 2008 (32-bit)?
Any help would be greatly appreciated!

I am installing W2k8 R2 Domain Controller with Oracle Express 10g.
This is the tip to make it work.
Go to the installer OracleXE.exe -> Right click + Select Properties + Compatibility + Run this program in Compatibility Mode fot + Windows 2003 Sp1
Then Select Run this Program as administrator.
After this run the OracleXe.exe and it will install properly.
Remember to double check that everything works fine.

Can't install windows installer 4.5 on my sbs 2008

Hi
I am trying to install windows installer 4,5 on my sbs 2008. It is a prereqierment for upgrading Exchange 2007 sp1 to sp3.
But i am facing with this error : The update does not apply to your system
Nima
Nima

I have already have this
HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\Installer
Reg_SZ: Logging
Value: voicewarmupx
Nima

HT5628 Does it work with a macbook (aluminium) 2008 late, even if it isn't said in the desription? Windows 7 also did run, but wasn't in the list of working models for windows 7...

Does it work with a macbook (aluminium) 2008 late, even if it isn't said in the desription? Windows 7 also did run, but wasn't in the list of working models for windows 7 either...

JK90, I have boot camp on my Mountain Lion late-2008 unibody running 64 bit Windows 8, with a brand new ssd and 8gigs of ram. Although my scenario is officially unsupported, it works great. My 4+ yr old mac is the best PC I've ever owned :-)
There are a number of complications during and after installation, and you need to do a lot of research to make sure you get it right. I worked long and hard to get everything running just right.
Even after Windows was installed I had even more trouble with my drivers, and getting especially getting the trackpad to work properly, so I needed to use a regular mouse until I could get the trackpad on.
Also check out trackpad++, I've been using it for years now, it upgrades the trackpad drivers from apple and makes using Windows much nicer.

Vista 64, Latest Driver & X-Fi Elite Pro: Audio issue with Pro Evolution Soccer 2008 (Pes 20

Hi,i have formatted XP S.P.2 and now i'm using Vista Ultimate 64.I have got an X-Fi Elite Pro and i have installed all the applications using the CD-Rom.I updated the driver, Alchemy and Mediasource to the latest version.The system is totally clean and updated (I used Windows Update when i finished to install Vista and nothing was installed). I would like to know why i cannot play Pro Evolution Soccer 2008 like in XP: when i enter in the game i have a noise (looks like the noise of the needle in old gramophones...) and i cannot use the speakers (Creative ProGamer G500).If i turn the volume to 0 i can hear it too... i have to switch off the speakers or exit the game to delete it.Is it another bug I tried to uninstall and doing a new installation of the game but... no way men... Thanks p.s.After year and 4 months (release date of Vista) is it possible to have a decent driver... The Audio Quality in Vista Ultimate 64 bit is lower than in XP and the same wave files have distortion with the low and middle-high volume (60-70).
Problems that i have never had in XP... i cannot reinstall XP another time. I bought Vista in 2006 and i cannot use it till you'll release a good sw.
Have we to wait till 200 for a fuc.ing working driver
My Hw.: Intel Core 2 Quad 6600, DFI Lanparty DK, 2GB DDR800 Team Group, X800XT 52MB, Enermax Noisetaker 600W, Creative X-Fi Elite Pro, Creative ProGamer G500, Plextor PX76SA, Logitech G5 and G5.

The problem is now official: other customers have problems with some games (Pes 2008 and Crysis in particular). I'll show u the main italian hw. forum. There is a thread of more than 500 pages just about Creative X-Fi: http://www.hwupgrade.it/forum/showth...42043&page=550 I would like to know if u test drivers before sharing... because i don't know what you did in more than year.You should meditate, people... I paid more than 400 $ for an Elite Pro and after year and 4 month i cannot install Vista 64 too for audio issues with mp3-wave files and Pes 2008 or Vista 32 bit for problems with Pes 2008. This is my latest Creative product, you can trust.

Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When

Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When I create music in Garageband I usually adjust the volume and save it. Even now when I share the Garageband created files with iTunes 11.1.1, the volime I previously set in Garageband is retained. However, when I use the music to create a slide show in iPhoto 2008 and export to Quicktime 7.6.6, the volume level I previously set is lost and seems to default to a low level. The problem seems to be either in the slide show export from iPhoto 2008 to Quicktime 7.6.6 or in Quicktime itself. Is there a work around, so that I can retain the volume level I had previously set in Garageband, a volume level that seems to transfer without problem to the new iTunes. But then iPhoto 2008 (slide show) possibly or Quicktime 7.6.6 do not cooperate. Before I did the upgrade to Snow Leopard, the new iTunes and Quicktime I had no problems with the set volume being retained in the old Quicktime. The reason I need control over the volume is that all these music files are uploaded to YouTube.

Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When I create music in Garageband I usually adjust the volume and save it. Even now when I share the Garageband created files with iTunes 11.1.1, the volime I previously set in Garageband is retained. However, when I use the music to create a slide show in iPhoto 2008 and export to Quicktime 7.6.6, the volume level I previously set is lost and seems to default to a low level. The problem seems to be either in the slide show export from iPhoto 2008 to Quicktime 7.6.6 or in Quicktime itself. Is there a work around, so that I can retain the volume level I had previously set in Garageband, a volume level that seems to transfer without problem to the new iTunes. But then iPhoto 2008 (slide show) possibly or Quicktime 7.6.6 do not cooperate. Before I did the upgrade to Snow Leopard, the new iTunes and Quicktime I had no problems with the set volume being retained in the old Quicktime. The reason I need control over the volume is that all these music files are uploaded to YouTube.

Best phone for syncing with Office for Mac 2008?

I'll be getting a new phone in a few months and I want to get one that syncs perfectly and effortlessly with Office for Mac 2008.
I currently use a Motorola Q and a Macbook Pro and have to go through isyncing Office with the Mac versions (iCal and Address Book) and then syncing using Missing Sync. It works, but it's slow and not very elegant.
What's the smoothest solution?
- Mike

Just be careful if you use categories in Entourage for your mail, calendar and contacts and determine whether those categories will move with your contacts and other data to the iPhone when it syncs. I doubt that it will if sync services works the same way between Entourage and iCal because it doesn't support the category capabilities in Entourage which is why people had turned to Missing Sync for the 2004 version of MS Office 2004
FWIW
Ben

Can I conect iMac 2012 with thundelbolt to iMac 2008 mini display port use this iMac like second monitor.

Can I conect iMac 2012 with thundelbolt to iMac 2008 mini display port use this iMac like second monitor.

This Apple article:
What are the requirements for TDM?
suggests that older iMac do not support Target Dispaly Mode.

Problems with Crystal reports server 2008 VI (Invalid logon information)

I have added a report that connects to the SQL server and also I set up the required ODBC for the report on the server. I could run the report without any issues.
When I add the same report to another folder in CMC or add a new report that uses the same connection, and try to run it, I get the following error.
I did set location and verify database in Crystal designer many times and added the report into CMC, but still it gives me the error.
However the first report that I added still works fine. For some reports it shows the parameter screen and when I enter them and click OK it gives the same error. I checked the logon information and they are correct. Reports work fine in Crystal designer. When I added the report, in the database configuration I selected "Use original database logon information from the report." and entered the SQL user id and password.
error message:
"The database logon information for this report is either incomplete or incorrect"
I then went back to the database configuration and selected "Use custom database logon information specified here." and entered the ODBC connection info.
With this when I run the report it takes a little longer and again asks me to enter the user id and password, even though I selected "Use same database logon as when report is run" option. Still when I enter the user id and password and click ok it keeps on prompting the same. I kept on entering it for 20 times, still it kept on prompting for the same. I am not sure how to make this work.
The report that I am trying to run has an SQL command (that links with 10+ tables), views and some tables. It also got one dynamic parameter prompt.
Also when I select the item from dropdown box "Table Prefix" and save and come back to the database configuration the option I selected is blank. It seems like CMC is not saving this. I found out that this sometimes happens with the password too.
I have checked on SAP forum and could not find a solution for either of these problems yet.
I do have created a web site with CR developer 2008 that runs the same report and it works there without any issues.
Could any one help me with this?

I assume that you have built your reports with the CR Designer 2008 V1. Try to open the affected report in the CR Designer and select Database->VErify database and save it back into the repository. Does it work?
Regards,
Stratos

How does one install a express sql server to run with Visual Web Developer 2008?

I successfully installed .NET framework v 3.5 and VWD 2008 on a new Vista laptop. When I want to add a Sql Server database to a website, errors tell me to install SS 2005 Express. MSDN SS 2005 Express download tells me I MUST first install .NET framework v 2.0 before SS 2005. When I try to install framework v 2.0, I'm sent to v. 3.5 and no way to download SS 2005.
How does one install a express sql server to run with Visual Web Developer 2008?

Momark,
Do you still need help with this?
Thank you!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Best practice for installation oracle 11g rac on windows 2008 server x64

hello!
can somebody tell me a good book or an other kind of literature regarding "best practice for installation oracle 11g rac on windows 2008 server x64"? thx in advance!
best regards,
christian

Hi Christian,
Check this on MOS
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
DOC Modified: 14-DEC-2010
Regards,
Levi Pereira

CS6 compatibility with older macs (2007-2008), using Mavericks 10.9

I've heard about compatibility issues with older macs (2007-2008) when trying to run Adobe Creative Suite 6 Master Collection CS6 with Mavericks 10.9. Right now I'm using CS6 on my existing mid-2007, with Mountain Lion, -works great, and I'm worried if I upgrade to Mavericks there may be problems (based on FAQs)
I do lots of video editing/rendering and am looking into getting another back-up computer to speed up editing time. I'm looking at purchasing an older Apple Mac Pro Tower : 2008 : Xeon 8-core 2.8ghz : 16gb ram : 1TB hd. Will this run Adobe Creative Suite 6 Master Collection CS6 if I'm using Mavericks 10.9? If not, why?
Does the issue pertain to Mavericks with older macs, or is it CS6 with Mavericks, or what? Thanks!

Mac 10.9.3 and CS6 https://forums.adobe.com/thread/1480238 may help

What new monitors are compatible with my Mac Pro 2008

My monitor Samsung Sync Master didn't turn on the next day after simple putting the computer to sleep at night. Now I am searching for a new monitor and want o make sure I find on that is compatible with my Mac Pro 2008. What do I need to pay attention to while searching?

Does the monitor work now from a reboot?
IOf yes then:
OS X: When your Mac doesn't sleep or wake - Apple Support
Apple computers: Black screen or unresponsive Mini DisplayPort display after sleep - Apple Support
Just about any modern monitor will work with your Mac

Installation woes with 2008-04-RC & 2008-03

Similar Messages

Maybe you are looking for