Installing a driver problem

I'm trying to install the driver for my Zoom r-24 (recording software). I click the driver and the installer opens up, I select the Mac HD as the disk and it goes to instalation type window where it says 'Click install to install a standard installation of this software on the disk' but the install button is faded and it won't let me click it, only go back. What's wrong? Thanks in advance

Hi,
Please also check Event Viewer if it identify this problem.
In addition, also check Device Manager, if similar driver already installed, try to uninstall them and reinstall new driver again for test.
Roger Lu
TechNet Community Support

Similar Messages

Win 7 install disk driver problem on Satellite L40-18E

Hi' to get to the point im trying to install windows 7 on a Satellite L40-18E and when i boot from cd it says i didnt safely remove storage device.
When i start up Vista as normal and try install from my computer it says i do not have the hard disk drives. am so confused please help:-)

Hi again
sorry i wrote that message last night when i was tired and realise it its just a poor description of my problem to say the least.
Basicaly the laptop L40 i have bought is from a friend who copied all the stuff he wanted to keep to his new laptop and just gave me it with his programs and music on it. It has two partitions on it and windows vista os that i personaly think is a load of rubbish. All i realy want to do is set it back to factory setting and have one main partition instead of 2 small one's then load a fresh install of win 7 (no upgrade). It is a new windows 7 disk that fell of the shelf at work (cough) but is 100% never been used brand new. My computer know how is as good as my grammer (which is poor). i have changed bios to boot from dvd and pressed any key to boot it first load bar goes fine then second stops at 1/3 and a message about me not unplugging a storage device pops up and tells me i can go no further.
So i tried to boot it from the vista desk top in my computer went well at first then message poped up about correct hard disk drivers not installed from there the confussion started.
If u could dumb down or give me a description of were to find the info u need im more than happy to do it just not confident with pc's let alone vista

Installed Nvidia Driver Problems?

I recently installed Nvidia Ge-Force 5200FX Driver onto my computer and it changes my video bit from 16-Bit to 4-Bit and i cant change back anyone know how i can change it back without uninstalling the driver.

There is one thing you do not seem to have understood so far: This forum is not a general hardware forum but offers help and advice for MSI Retail products only. You were using an MSI MS-6590 KT6 Delta mainboard in your other thread. That is the only reason why we replied to your questions about an unknown video card model in the first place (even though the lack of a video driver for an unknow card has not much to do with your mainboard.
Now you are asking us about some NVIDIA driver issue regarding the "same type of [non-MSI] graphics card" but in a "different computer". You provided no useful information about your system configuration whatsoever (no information about your operating system, no information about the exact driver version, no information about why you installed an NVIDIA driver even though the unknow video card seems to be an old ATI model, etc.) I see nothing that relates to any MSI Retail product in the context of your driver question. I am locking this topic.
If you find one reason why I should re-open your topic and not advise you to look for help in a general hardware forum (there are tons of those out there on the net) write me a PM and tell me what this has to do with MSI Retail products. I will than gladly unlock this thread. Until then:
__ TOPIC LOCKED __

P6 8.3 Professional Typical Install Oracle Driver Problem

Hello,
I have installed P6 8.3 EPPM on a machine on top of Oracle 11g database. Now I just want to see how P6 Professional interface looks like so I am trying to do P6 Typical Install.
After selecting "Typical" in installation screen, it asks for
1. Oracle Connection String
2. UserName and Password (Database Alias is readonly and set to PMDB)
I have database with SID orcl running on port 1521, my question is what should I give for connection string and username and password. Also I didn't get significance of PMDB alias.
I tried orcl and //machine:1521/orcl in connection string and in username/password I tried PUBUSER (a schema present in oracle database) and its password, but get this error
Bad public user name or password. Cannot load OCI DLL: oci.dll;
Can someone help here?
regards, Prasad

Hello Daniel,
this is how my Path=E:\instantclient_11_2;...... variable looks like. I have put tnsnames.ora and sqlnet.ora in E:\instantclient_11_2 and this is how
TNS_ADMIN=E:\instantclient_11_2 looks like.
Contents of tnsnames.ora
# tnsnames.ora Network Configuration File: E:\app\Administrator\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (CONNECT_DATA =
      (SID = CLRExtProc)
      (PRESENTATION = RO)
ORCL =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.27)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = orcl)
Contents of sqlnet.ora
# sqlnet.ora Network Configuration File: E:\app\Administrator\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
still the same error
Database connection failed: Error Message:
Bad public user name or password. Cannot load OCI DLL: oci.dll;
I tried both ORCL and //172.16.3.27:1521/ORCL as connection strings.
should instant client used be 32 bit as well?
regards, Prasad

HP Photosmart Plus 209a-m install for Windows 8 not working, driver problem?

I am trying to install the driver/software for HP Photosmart Plus 209a-m on my Windows 8 laptop and keep getting "the Wizard has detected a problem with the driver software for the selected printer". Seems like a catch-22 because that's why i'm trying to install it. I have a brand new hard drive (as of today) with nothing else on it except Norton, which i just installed. I shouldn't have corrupted drivers yet. if it's missing, why can't HP get it installed? I've downloaded hppiw and trying to install that. after i get the "problem with the driver" message, i select the option to install the full suite + driver, and it attempts another download (why is it doing that when i already downloaded the software?), then fails with "Your download was cancelled. You can attempt the download again by clicking Retry". Anybody know how to get me out of this loop and get the software installed?

hi,
sometimes norton does block the installation or the drivers download...
i would suggest you to turn of norton and complete the installation and then turn it back on..
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Video Or Graphic Card Driver Problem After Clean And Re-Install Windows 7 32-bit

Video Or Graphic Card Driver Problem After Clean And Re-Install Windows 7 32-bit I m Tired I m Finding & Finding Drivers
But I Wont be Able To Play Games & Other Apps Please Solve This And Give Me Link For Video Card Driver Or
Graphic Card Driver For Windows 7 32-bit (x86)
THANKS
PROFESSOR TOM........................................

Hi:
See if this W7 32 bit graphics driver works...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100029-2&cc=us&dlc=en&lc=en...

Nokia N8 installing driver problem !! HELP ME !!!!

Hi guys, i recently bought a Nokia N8.
i've install Nokia Ovi Suit from folder that exist in my phone, it's completely install ovi suit and download Nokia N8's USB driver from internet and stores it in "C:\Program Files\Nokia\Connectivity Cable Driver".
when i connect the phone in Nokia Ovi Suit Mode via USB, windows can found it, but cannot install its drivers !!!
Windows says that: "Windows found driver software for your device but encountered an error while attempting to install it.
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it." (i use Windows Vista 32-bit, see below attachment)
what can i do ??!!! plzzzzz help me i need too run Ovi Suit !!!
Attachments:
Nokia N8 USB Driver Problem.jpg ‏138 KB

I am having the exact same issue.
The Ovi store was installed first via the N8 built in software, then uninstalled and reinstalled using the latest Ovi version from Nokia's webinstaller download, but still no success with the Ovi connection.
The other file transfer modes work fine 'media transfer & 'mass storage' but the Ovi store is still unable to run due to Windows VISTA not being able to locate the drivers for the N8 software. (despite being installed!)
After accepting the prompt for Windows to locate the drivers... The same error as RayMond_021 screen shot appears.
"COMPUTER SAYS.... NO!"
Super frustrating! A brand new $800 phone and I can't even access the promised software (Ovi maps) that encouraged me to buy it!?
PLEASE HELP US!!!!!

T400 with F3507G Win7 Driver problem cannot complete install

I am trying to install driver of F3507G on T400 Windows 7 but cannot complete the installation the system still show in the device manager that mini card GPS port and mobile broad band GPS port on com 12 are the problem.
Cloud you please help to rectify what went wrong. Thank you in advace

Hello mate,
Have you got a sim card inserted when you tried to install the driver ?
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

Serious external drive problems after installing Mavericks

OK, so now I am seeing multiple external drive problems. Here is my setup: A GTech 4TB drive connected to MacBook Pro via Firewire, formatted of 2 partitions of 2TB each (called GT1 and GT2). This is then daisy chained to two WD drives of 2TB each, called WD1 and WD2.
After installing Mavericks everything worked fine (in fact I have an amazing speed increase). However, after restarting my machine this morning I have the following issues:
The GTech is now a single partition called MyBook (obviously a hangover from the WD drives. I suspect the WD drive managment software) with NO data files. Interestingly it shows the following USED 1,106,870,272 bytes (1.11 GB on disk). This suggests that one of the partitions has disapeared completely.
Whilst WD 1 launces ok, WD 2 causes the Finder to relaunch whenever selected, meaning I can't get to the files. I remember having this problem before when I upgraded to SL, and it having something to do with hidden files that needed to be deleted via the terminal. However, I have searched the web and can't find the solution again.
Given that WD 1 and 2 are my backups of GT 1 and 2, then I now have a situation where I cannot access my primary or backup files for GT 2. Very impressive - not!
Can anbody remember the hidden file solution for the finder relaunch?
Can anybody help me get back my GT1 and 2 partitions (as they have the latest work on them)?

FIrewire & Thunder bolt drives are having issues with Mavericks, avoid same until a fix is issued if you can.
many are reporting same, there is a firewire fault and TB HD on external HD from LaCie (Seagate) and from WD especially.
Technicians are looking into it.
Until there is resolution, consider setting up a USB ext. Time machine HD.
Until then consider confining Mavericks use with USB HD.
Ive tested a very long line of USB HD on Mavericks, all seem fine.
Recommend anyone DO NOT ATTACH any WD MyBook externals (firewire, thunderbolt or otherwise).
I dont have same to test, so I dont know if the problem is in the firmware on the SATA bridge or if its a problem with the WD software

Yosemite won't install due to a "S.M.A.R.T. drive problem that can't be repaired."

After downloading Yosemite successfully, it won't install due to a "S.M.A.R.T. drive problem that can't be repaired." It says to back up as much as possible and replace the drive. Everything works flawlessly with Mavericks. What gives??

If you are getting a S.M.A.R.T. error then you should be more worried about losing everything on your drive then about upgrading your Mac OS. Regardless of if you are running Mac OS, Linux, or Windows, you should never just disregard such a drive error. S.M.A.R.T. is designed to give you a warning that your drive is statistically having far more errors than normal and should be backed up immediately and typically replaced.
In your case, it's likely a coincidence that your drive is failing at the time you are attempting to upgrade to Yosemite. You should stop what you are doing, backup your drive (if you don't already have the backups that you should prior to any OS upgrade), and replace the hard drive prior to moving forward.
To make it clear, your hard drive is likely going to fail soon and you may lose everything on it at any moment. This failure has nothing to do with Yosemite or any Mac OS. All hard drives fail at some point. Hopefully this S.M.A.R.T. notice has given you the opportunity to solve a major problem before it gets worse.

G550 - Problem installing sound driver - Windows XP

i tried the following but didn't have any luck :
==============================================
the way is:
downoload
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-69852#audio
install it
next XP find audio hardware
then use this driver
http://consumersupport.lenovo.com/en/DriversDownloads/drivers_show_1402.html
C:\Drivers\Conexant Audio Driver\XP32
==============================================
Lenovo now provided a 255mb audio driver for XP. is that right ?
I tried it 3 times but had no luck.
any suggestion ?
thanks
alex

andrej263735 wrote:
I got the same problem with my lenovo G550 on Windows XP.
I'm not able to install audio driver.
Any solutions?
Extract from 255mb lenovo crapy audio driver, folder with name XP32, with Winrar
In Device Manager right click on not installed audio device,
choice Update Driver... , choice Install from a list location (Advanced)
Select Include this location in the search and browse to XP32 folder
BTW you manage install Energy Management Driver to XP???

Lenovo G550 59-046612 problem installing audio driver in XP - SP2

hi,
I have recently bought a Lenovo G550 59-046612 laptop. As the given driver cd includes all the drivers for Windows 7 I downloaded all the required drivers for my laptop from the following list
http://consumersupport.lenovo.com/in/en/DriversDownLoads/APR_Driver_List.aspx?CategoryID=600154&OS=W...
as I am using windows XP Service Pack2. All the drivers installed fine but I got problem installing the audio driver. I tried both from the downloaded exe and also from the extracted folder named drivers in my C drive.I was getting the error "A conexant audio device could not be found.The application will now exit." Please help me out.
Thanks in advance
Sudip

have you tried to install drivers on safe mode or manually?
after you locate the .inf file for the driver that you want to install, manually install the new driver. to do this, follow these steps:
- click start, right-click computer, and then click properties.in the tasks pane, click device manager.
- if you are prompted for an administrator password or confirmation, type your password or click continue.
- in device manager, locate the device for which you want to install the driver.
note to display hidden devices, click show hidden devices on the view menu.
- right-click the device, and then click update driver software.
- click browse my computer for driver software, click let me pick from a list of device drivers on my computer, and then click have disk.
- in the install from disk dialog box, click browse, locate an .inf file for the device driver that you want to install, and then click open.
- follow the steps in the update driver software devicename dialog box to update the driver

Hp deskjet 1050a j410 install\driver problem

Hey! i've recently bought a scanner\printer which i intend to use with my laptop, no hassle.
but installing this thing is a bloody nightmare and i get errors and what not, how the heck am i supposed to do this?
i am a fairly tech savvy person, but your printer have gotten the best of me and i am constraining myself for not using coarse language in this post (this printer + the absurdly "secure" registry screen "oh sorry couldn'nt handle your request lol").
anyway, i don't have a cd-rom on my laptop and i figured that would be no problem, seeing as this whole internet exists i assumed i could just download the files on the cd, but to no avail.
i'm not sure what kind of magic files are on the cd and why somone figured it to be a great idea to make it this hard to install a printer, but first of all, the printer i have bought is apparently not supported in windows as it won't show up when i try to add a printer in "devices and printers". there is nothing even remotely close to the model i have, which the leaves me with installing from a disk i can't access. i've been googling for hours after a simple "install" file, but this is apparently a trade secret and is not available online. Why that is i suppose only birds and technical engineers know.
I have also tried to just install the driver directly, with a futile hope of that it would solve it, i went here:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4160...
but this file was also utterly useless as it turns up with an error and is unable to elaborate even a single bit.
please help me, i need to scan some things.
good day
s
i7/win7x64

I am willing to help you but I need to know quite a bit more information than all that you put in the first post (want good answers, ask good questions).
First of all, what is the operating system of the computer you are trying to install the printer on?
How is the printer connected (USB, wireless, or Ethernet)?
Is it that you are getting the error message "Failed to find driver package to install?"
Are you still seeking assistance?
Keep in mind, if this printer is brand-new, you get a free year of technical support and a live person will instantly respond to your questions. This is just a forum and the more complicated the post when trying to explain the problem the less likely it seems people respond. I'm happy to help if you still need it though.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Equium P200-1ED - have problem with installing VGA driver

Hello
I have problem with installing vga video driver, each time in installion it stops on
Version: 6,14.10,4833 and there is error poping up.........
Please help!

Hello
What error message is it exactly?
Make sure that the chipset driver and SP2 is installed at least.
I had a similar issue that I cant install the display driver. The error message was something like the hardware is not supported
But it was very easy to solve this problem. I installed the driver via device manager. I have selected the graphic card and choose update driver. Then I did choose the advanced installation to choose the directory by myself.
Anyway, after restart the driver was installed and it worked. :)
Greets

Problem in installing printer driver!

Hi, I have MacBook Pro using os x 10.6.7 I have an issue installing the driver of my new printer Samsung CLX 3185 always gave me an error! local apple support told me that mac os x is having problems with USB printers! please help. thanks

try uninstalling all the drivers you just installed for your printer and plug in your printer and run software update from the  on the upper left of the screen. if there are no drivers available for that, you might have to wait as suggested by your local apple tech.
EDIT:
try this
http://support.apple.com/kb/DL905

Installing a driver problem

Similar Messages

Maybe you are looking for