Installing CUE on the SRE module.

Hey guys, got a question that has been irritating me to no end for the last couple of days.  I am setting up a 2921 and have an SRE module that I want to install CUE on but I can't seem to get the FTP to work correctly.  I load the package, get the language selection and wait for the module to reset and then I get the error that has been my bain for a couple of days now.  Any insight on what I am doing wrong would be greatly appreciated.  Below is the error as well as my configuration.
Router#$install url ftp://user:[email protected]/cue-vm-k9.sme.8.0.5.pkg
Proceed with installation? [no]: y
Loading cue-vm-k9.sme.8.0.5.pkg.install.sre !
[OK - 22272/4096 bytes]
Following languages are available for installation.
  #       SKU    Language Code           Language Name
  1       ITA         it_IT          CUE Voicemail Italian
  2       ESP         es_ES          CUE Voicemail European Spanish
  3       ENU         en_US          CUE Voicemail US English
  4       FRA         fr_FR          CUE Voicemail European French
  5       ESO         es_CO          CUE Voicemail Latin American Spanish
  6       ESM         es_MX          CUE Voicemail Mexican Spanish
  7       ARA         ar_SA          CUE Voicemail Arabic
  8       NLD         nl_NL          CUE Voicemail Dutch
  9       SVE         sv_SE          CUE Voicemail Swedish
10       NOR         no_NO          CUE Voicemail Norwegian
11       FRC         fr_CA          CUE Voicemail Canadian French
12       PTG         pt_PT          CUE Voicemail Portuguese
13       TUR         tr_TR          CUE Voicemail Turkish
14       HUN         hu_HU          CUE Voicemail Hungarian
15       ENG         en_GB          CUE Voicemail UK English
16       DEU         de_DE          CUE Voicemail German
17       DAN         da_DK          CUE Voicemail Danish
18       PTB         pt_BR          CUE Voicemail Brazilian Portuguese
19       KOR         ko_KR          CUE Voicemail Korean
20       CHS         zh_CN          CUE Voicemail Mandarin Chinese
21       JPN         ja_JP          CUE Voicemail Japanese
22       RUS         ru_RU          CUE Voicemail Russian
You can install upto 5 language(s) on this platform.
Please select the language(s) you want to install by entering the language number(s)
Languages can be entered as comma separated or space separated list
Example: 1,3 would select 'Italian' and 'US English'
Enter languages:3
Following languages will be installed on the system:
CUE Voicemail US English
Do you want to continue with the selected options?(y/n):y
input string: lang=no=1,CUE Voicemail US English
Router#
*Sep 13 14:13:26.847: %SM_INSTALL-6-INST_RESET: SM1/0 is reset for software installation.
*Sep 13 14:15:09.491: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration Request
*Sep 13 14:15:09.495: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP File Request
Error message(code:0) Bootloader tftp error received on SM1/0
*Sep 13 14:16:10.711: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Error Msg Req
*Sep 13 14:16:10.711: %SM_INSTALL-6-RBIP_ERROR: Error message(code:0) Bootloader tftp error received on SM1/0
Abort successful on SM1/0.
*Sep 13 14:18:14.479: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration Request
*Sep 13 14:18:14.479: %SM_INSTALL-6-INST_ABORT: SM1/0 SW installation aborted, reason:Bootloader tftp error
Configuration:
Current configuration : 1786 bytes
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
boot-start-marker
boot-end-marker
no aaa new-model
no ipv6 cef
ip auth-proxy max-login-attempts 5
ip admission max-login-attempts 5
ip cef
multilink bundle-name authenticated
voice-card 0
license udi pid CISCO2921/K9 sn FTX1538AKLC
hw-module pvdm 0/0
hw-module sm 1
redundancy
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
no ip address
duplex auto
speed auto
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
interface GigabitEthernet0/2
ip address 10.0.0.1 255.255.255.0
duplex auto
speed auto
hold-queue 60 out
interface SM1/0
ip unnumbered GigabitEthernet0/2
service-module fail-open
service-module ip address 10.0.0.3 255.255.255.0
service-module ip default-gateway 10.0.0.1
hold-queue 60 out
interface SM1/1
description Internal switch interface connected to Service Module
no ip address
interface Vlan1
no ip address
ip forward-protocol nd
no ip http server
no ip http secure-server
ip route 10.0.0.1 255.255.255.255 SM1/0
control-plane
mgcp profile default
gatekeeper
shutdown
line con 0
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line 67
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
login
transport input all
scheduler allocate 20000 1000
end Current configuration : 1786 bytes
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
boot-start-marker
boot-end-marker
no aaa new-model
no ipv6 cef
ip auth-proxy max-login-attempts 5
ip admission max-login-attempts 5
ip cef
multilink bundle-name authenticated
voice-card 0
license udi pid CISCO2921/K9 sn FTX1538AKLC
hw-module pvdm 0/0
hw-module sm 1
redundancy
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
no ip address
duplex auto
speed auto
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
interface GigabitEthernet0/2
ip address 10.0.0.1 255.255.255.0
duplex auto
speed auto
hold-queue 60 out
interface SM1/0
ip unnumbered GigabitEthernet0/2
service-module fail-open
service-module ip address 10.0.0.3 255.255.255.0
service-module ip default-gateway 10.0.0.1
hold-queue 60 out
interface SM1/1
description Internal switch interface connected to Service Module
no ip address
interface Vlan1
no ip address
ip forward-protocol nd
no ip http server
no ip http secure-server
ip route 10.0.0.1 255.255.255.255 SM1/0
control-plane
mgcp profile default
gatekeeper
shutdown
line con 0
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line 67
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
login
transport input all
scheduler allocate 20000 1000
end
Any insight on what I have messed up?  This is the first time I have had to set up a CUE and used Cisco's document for help here: http://www.cisco.com/en/US/docs/routers/access/interfaces/software/feature/guide/ism-sm-sre.html#wp1140891
This was helpful but doesn't correct my problem and need some additional assistance as you can see.  Thanks for everything!

As requested, here is the information displayed from the CLI.  All files that need to be there appear to be there unless I am missing something?
ftp> open 10.0.0.2
Connected to 10.0.0.2.
220 3Com 3CDaemon FTP Server Version 2.0
User (10.0.0.2:(none)): user
331 User name ok, need password
Password:
230 User logged in
ftp> dir
200 PORT command successful.
150 File status OK ; about to open data connection
drwxrwxrwx 1 owner group         0 Sep 10 09:23 .
drwxrwxrwx 1 owner group         0 Sep 10 09:23 ..
-rwxrwxrwx 1 owner group  10418880 Sep 10 09:23 cue-installer.sme.8.0.5
-rwxrwxrwx 1 owner group  30993911 Sep 10 09:23 cue-vm-en_US-langpack.sme.8.0.5.
prt1
-rwxrwxrwx 1 owner group 137634500 Sep 10 09:23 cue-vm-full-k9.sme.8.0.5.prt1
-rwxrwxrwx 1 owner group    133106 Sep 10 09:23 cue-vm-installer-k9.sme.8.0.5.pr
t1
-rwxrwxrwx 1 owner group       891 Sep 10 09:23 cue-vm-k9.sme.8.0.5.key
-rwxrwxrwx 1 owner group    688351 Sep 10 09:23 cue-vm-k9.sme.8.0.5.pkg
-rwxrwxrwx 1 owner group     22272 Sep 10 09:23 cue-vm-k9.sme.8.0.5.pkg.install.
sre
-rwxrwxrwx 1 owner group       691 Sep 10 09:23 cue-vm-k9.sme.8.0.5.pkg.install.
sre.header
-rwxrwxrwx 1 owner group   3457323 Sep 10 09:23 cue-vm-langpack.sme.8.0.5.pkg
-rwxrwxrwx 1 owner group      6364 Sep 10 09:23 cue-vm-license_50mbx_cme_7.0.5.p
kg
226 Closing data connection
ftp: 911 bytes received in 0.00Seconds 911000.00Kbytes/sec.
ftp> ftp> open 10.0.0.2
Connected to 10.0.0.2.
220 3Com 3CDaemon FTP Server Version 2.0
User (10.0.0.2:(none)): user
331 User name ok, need password
Password:
230 User logged in
ftp> dir
200 PORT command successful.
150 File status OK ; about to open data connection
drwxrwxrwx 1 owner group         0 Sep 10 09:23 .
drwxrwxrwx 1 owner group         0 Sep 10 09:23 ..
-rwxrwxrwx 1 owner group  10418880 Sep 10 09:23 cue-installer.sme.8.0.5
-rwxrwxrwx 1 owner group  30993911 Sep 10 09:23 cue-vm-en_US-langpack.sme.8.0.5.
prt1
-rwxrwxrwx 1 owner group 137634500 Sep 10 09:23 cue-vm-full-k9.sme.8.0.5.prt1
-rwxrwxrwx 1 owner group    133106 Sep 10 09:23 cue-vm-installer-k9.sme.8.0.5.pr
t1
-rwxrwxrwx 1 owner group       891 Sep 10 09:23 cue-vm-k9.sme.8.0.5.key
-rwxrwxrwx 1 owner group    688351 Sep 10 09:23 cue-vm-k9.sme.8.0.5.pkg
-rwxrwxrwx 1 owner group     22272 Sep 10 09:23 cue-vm-k9.sme.8.0.5.pkg.install.
sre
-rwxrwxrwx 1 owner group       691 Sep 10 09:23 cue-vm-k9.sme.8.0.5.pkg.install.
sre.header
-rwxrwxrwx 1 owner group   3457323 Sep 10 09:23 cue-vm-langpack.sme.8.0.5.pkg
-rwxrwxrwx 1 owner group      6364 Sep 10 09:23 cue-vm-license_50mbx_cme_7.0.5.p
kg
226 Closing data connection
ftp: 911 bytes received in 0.00Seconds 911000.00Kbytes/sec.
ftp>
As the install goes on the router, it gets to the .key file and errors out with the messages provided earlier in this topic.  The file is indeed there though...

Similar Messages

  • Installing CUE 8.6.7 on ISM-SRE-300-K9

    Hello,
    I been trying to install CUE on ISM0/0 but so far i havent been available...
    My configuration goes as follow:
    interface ISM0/0
     ip unnumbered GigabitEthernet0/0.11
     ip virtual-reassembly in
     service-module fail-open
     service-module ip address 130.11.1.3 255.255.0.0
     service-module ip default-gateway 130.11.1.1
    end
    ip route 130.11.1.3 255.255.255.255 ISM0/0
    till this point everything goes ok, i have connectivity between each of em...
    then on ISM  my config is
    ServicesEngine boot-loader> show config                                        
    IP addr:                130.11.1.3
    Netmask:                255.255.0.0
    TFTP server :           130.11.1.1
    GW IP addr:             130.11.1.1
    Default Boot:           disk
    Bootloader Version:     2.1.18
    Bootloader Name:        bootloader
    Default Helper-file:    /cue-installer.SPA.sme.8.6.7
    Default bootloader:     secondary
    however when i issue the boot helper command it goes on a cycle showing the next output
    Loading tftp://130.11.1.1/cue-installer.SPA.sme.8.6.7 ... done.
    Verifying ...
    Corrupted netboot image  detected
    done.
    Starting Kernel.
    After this server reboot and it goes on cycling.
    I have checked this guide so far, and i think im not missing a step.
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/unity_exp/rel8_6/install/CUE_86_install/boothelp.html
    TYVM

    Sure can, here are my outputs
    -------Show Ver--------
    Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.3(2)T, RELEASE SOFTWARE (fc3)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2013 by Cisco Systems, Inc.
    Compiled Thu 28-Mar-13 11:05 by prod_rel_team
    ROM: System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)
    RTR_V_CPACK uptime is 15 hours, 30 minutes
    System returned to ROM by reload at 19:31:49 CUU Mon Apr 14 2014
    System image file is "flash0:c2900-universalk9-mz.SPA.153-2.T.bin"
    Last reload type: Normal Reload
    Last reload reason: Reload Command
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    Cisco CISCO2921/K9 (revision 1.0) with 1523712K/49152K bytes of memory.
    Processor board ID FTX1749AJ5G
    4 Gigabit Ethernet interfaces
    2 terminal lines
    1 Channelized E1/PRI port
    6 Voice FXO interfaces
    1 Internal Services Module (ISM) with Services Ready Engine (SRE)
    DRAM configuration is 64 bits wide with parity enabled.
    255K bytes of non-volatile configuration memory.
    250880K bytes of ATA System CompactFlash 0 (Read/Write)
    License Info:
    License UDI:
    Device#   PID                   SN
    *0        CISCO2921/K9          FTX1749AJ5G     
    Technology Package License Information for Module:'c2900'
    Technology    Technology-package           Technology-package
                  Current       Type           Next reboot  
    ipbase        ipbasek9      Permanent      ipbasek9
    security      None          None           None
    uc            uck9          Permanent      uck9
    data          None          None           None
    Configuration register is 0x2102
    ------------Show diag--------------------
    Slot 0:
            C2921 Mother board 3GE, integrated VPN and 4W Port adapter, 10 ports
            Port adapter is analyzed
            Port adapter insertion time 15:30:43 ago
            EEPROM contents at hardware discovery:
            PCB Serial Number        : FOC17420KBG
            Hardware Revision        : 1.0
            Part Number              : 73-11835-11
            Top Assy. Part Number    : 800-30794-07
            Board Revision           : A0
            Deviation Number         : 130603
            Fab Version              : 03
            Product (FRU) Number     : CISCO2921/K9
            Version Identifier       : V08
            CLEI Code                : CMMHS10ARB
            Processor type           : C2
            Chassis Serial Number    : FTX1749AJ5G
            Chassis MAC Address      : 78da.6e82.b600
            MAC Address block size   : 80
            Manufacturing Test Data  : 00 00 00 00 00 00 00 00
            EEPROM format version 4
            EEPROM contents (hex):
              0x00: 04 FF C1 8B 46 4F 43 31 37 34 32 30 4B 42 47 40
              0x10: 06 16 41 01 00 82 49 2E 3B 0B C0 46 03 20 00 78
              0x20: 4A 07 42 41 30 88 00 01 FE 2B 02 03 CB 8C 43 49
              0x30: 53 43 4F 32 39 32 31 2F 4B 39 89 56 30 38 20 D9
              0x40: 04 40 C1 CB C2 C6 8A 43 4D 4D 48 53 31 30 41 52
              0x50: 42 09 C2 C2 8B 46 54 58 31 37 34 39 41 4A 35 47
              0x60: C3 06 78 DA 6E 82 B6 00 43 00 50 C4 08 00 00 00
              0x70: 00 00 00 00 00 F3 00 03 40 01 63 FF FF FF FF FF
              0x80: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0x90: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0xA0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0xB0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0xC0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0xD0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
            Internal Power Supply information
            Top Assy. Part Number    : 341-0226-03
            Deviation Number         : 0
            PCB Serial Number        : DCA1738K05Q
            RMA Test History         : 00
            RMA Number               : 0-0-0-0
            RMA History              : 00
            Version Identifier       : V03
            Product (FRU) Number     : PWR-2921-51-AC
            CLEI Code                : 0000000000
            Board Revision           : A0
            EEPROM format version 4
            EEPROM contents (hex):
              0x00: 04 FF 40 05 E2 DF 45 01 55 00 E2 03 88 00 00 00
              0x10: 00 C1 8B 44 43 41 31 37 33 38 4B 30 35 51 03 00
              0x20: 81 00 00 00 00 04 00 89 56 30 33 20 CB 8E 50 57
              0x30: 52 2D 32 39 32 31 2D 35 31 2D 41 43 C6 8A 30 30
              0x40: 30 30 30 30 30 30 30 30 F3 00 59 41 01 22 42 00
              0x50: 05 F8 00 50 01 F3 18 3B 02 F0 19 D9 03 E8 1B 76
              0x60: 04 E2 1C 49 05 D9 1D 1B 06 D8 1D ED 07 CF 1E BF
              0x70: 08 CE 1F 40 09 C2 1F B8 0A B8 20 34 0B B7 20 B0
              0x80: 0D AF 21 0C 0F 9F 21 67 11 91 21 94 13 87 21 C0
              0x90: 17 6E 21 DB 1B 57 21 EA 1F 3F 21 E2 23 28 21 D4
              0xA0: 27 0A 21 CD 42 41 30 FF FF FF FF FF FF FF FF FF
              0xB0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0xC0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0xD0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
            PVDM Slot 0:
            64-channel (G.711) Voice/Fax PVDM3 DSP DIMM PVDM daughter card
            Hardware Revision        : 1.0
            Part Number              : 73-11809-03
            Board Revision           : D0
            Deviation Number         : 0
            Fab Version              : 03
            PCB Serial Number        : FOC17453K9V
            RMA Test History         : 00
            RMA Number               : 0-0-0-0
            RMA History              : 00
            Processor type           : 00
            Product (FRU) Number     : PVDM3-64       
            Version Identifier       : V01
            EEPROM format version 4
            EEPROM contents (hex):
              0x00: 04 FF 40 05 DB 41 01 00 82 49 2E 21 03 42 44 30
              0x10: 88 00 00 00 00 02 03 C1 8B 46 4F 43 31 37 34 35
              0x20: 33 4B 39 56 03 00 81 00 00 00 00 04 00 09 00 CB
              0x30: 8F 50 56 44 4D 33 2D 36 34 20 20 20 20 20 20 20
              0x40: 89 56 30 31 20 D9 02 40 C1 FF FF FF FF FF FF FF
              0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
            WIC Slot 0:
            VWIC3-1MFT-T1/E1 - 1-Port RJ-48 Multiflex Trunk - T1/E1
            Hardware Revision        : 1.0
            Top Assy. Part Number    : 800-34657-01
            Part Number              : 73-13419-01
            Board Revision           : B0
            Deviation Number         : 0
            Fab Version              : 05
            PCB Serial Number        : FOC1745429E
            Version Identifier       : V01
            Product (FRU) Number     : VWIC3-1MFT-T1/E1
            CLEI Code                : COUIA7PCAA
            RMA Test History         : 00
            RMA Number               : 0-0-0-0
            RMA History              : 00
            EEPROM format version 4
            EEPROM contents (hex):
              0x00: 04 FF 40 06 ED 41 01 00 C0 46 03 20 00 87 61 01
              0x10: 82 49 34 6B 01 42 42 30 88 00 00 00 00 02 05 C1
              0x20: 8B 46 4F 43 31 37 34 35 34 32 39 45 89 56 30 31
              0x30: 20 CB 90 56 57 49 43 33 2D 31 4D 46 54 2D 54 31
              0x40: 2F 45 31 C6 8A 43 4F 55 49 41 37 50 43 41 41 03
              0x50: 00 81 00 00 00 00 04 00 D9 03 40 C1 CB FF FF FF
              0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
            WIC Slot 1:
            2nd generation - FXO Voice daughter card (4 port)
            Hardware Revision        : 5.0
            Top Assy. Part Number    : 800-33585-01
            Board Revision           : E0
            Deviation Number         : 0-0
            Fab Version              : 04
            PCB Serial Number        : FOC174279XY
            RMA Test History         : 00
            RMA Number               : 0-0-0-0
            RMA History              : 00
            Product (FRU) Number     : VIC2-4FXO
            Version Identifier       : V04
            CLEI Code                : CNUIAXJAAC
            EEPROM format version 4
            EEPROM contents (hex):
              0x00: 04 FF 40 00 4C 41 05 00 C0 46 03 20 00 83 31 01
              0x10: 42 45 30 80 00 00 00 00 02 04 C1 8B 46 4F 43 31
              0x20: 37 34 32 37 39 58 59 03 00 81 00 00 00 00 04 00
              0x30: CB 89 56 49 43 32 2D 34 46 58 4F 89 56 30 34 20
              0x40: C6 8A 43 4E 55 49 41 58 4A 41 41 43 FF FF FF FF
              0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
            WIC Slot 2:
            2nd generation - FXO Voice daughter card (2 port)
            Hardware Revision        : 5.0
            Top Assy. Part Number    : 800-33584-01
            Board Revision           : E0
            Deviation Number         : 0-0
            Fab Version              : 04
            PCB Serial Number        : FOC1745AP4H
            RMA Test History         : 00
            RMA Number               : 0-0-0-0
            RMA History              : 00
            Product (FRU) Number     : VIC2-2FXO
            Version Identifier       : V03
            CLEI Code                : CNUIARTAAC
            EEPROM format version 4
            EEPROM contents (hex):
              0x00: 04 FF 40 00 4D 41 05 00 C0 46 03 20 00 83 30 01
              0x10: 42 45 30 80 00 00 00 00 02 04 C1 8B 46 4F 43 31
              0x20: 37 34 35 41 50 34 48 03 00 81 00 00 00 00 04 00
              0x30: CB 89 56 49 43 32 2D 32 46 58 4F 89 56 30 33 20
              0x40: C6 8A 43 4E 55 49 41 52 54 41 41 43 FF FF FF FF
              0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    Internal Services Module (ISM) Slot 0
            Internal Services Module with Services Ready Engine
            Internal Services Module is analyzed
            Internal Services Module insertion time 15:30:43 ago
            EEPROM contents at hardware discovery:
            PCB Serial Number        : FOC174782WY
            Hardware Revision        : 1.0
            Part Number              : 73-13417-01
            Top Assy. Part Number    : 800-34577-01
            Deviation Number         : 0
            Fab Version              : 04
            Board Revision           : A0
            RMA Test History         : 00
            RMA Number               : 0-0-0-0
            RMA History              : 00
            CLEI Code                : IPUCAXHBAB
            Product (FRU) Number     : ISM-SRE-300-K9
            Version Identifier       : V02
            EEPROM format version 4
            EEPROM contents (hex):
              0x00: 04 FF C1 8B 46 4F 43 31 37 34 37 38 32 57 59 40
              0x10: 06 31 41 01 00 82 49 34 69 01 C0 46 03 20 00 87
              0x20: 11 01 88 00 00 00 00 02 04 42 41 30 03 00 81 00
              0x30: 00 00 00 04 00 C6 8A 49 50 55 43 41 58 48 42 41
              0x40: 42 CB 8E 49 53 4D 2D 53 52 45 2D 33 30 30 2D 4B
              0x50: 39 89 56 30 32 20 D9 03 40 C1 CB F3 00 06 40 05
              0x60: F3 43 00 16 FF FF FF FF FF FF FF FF FF FF FF FF
              0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    Embedded Service Engine 0/0 :
      Total platform memory : 1572864K bytes
      Total 2nd core memory : 0K bytes
      Start of physical address for 2nd core : 0x80000000
      Virtual address start of 2nd core memory : 0x0 - 0x0
      2nd core configured disabled
      L2 cache ways for 2nd core : 0
    -------------------------Show Inv-------------------------------------
    RTR_V_CPACK#sh inv
    NAME: "CISCO2921/K9", DESCR: "CISCO2921/K9 chassis, Hw Serial#: FTX1749AJ5G, Hw Revision: 1.0"
    PID: CISCO2921/K9      , VID: V08 , SN: FTX1749AJ5G
    NAME: "VWIC3-1MFT-T1/E1 - 1-Port RJ-48 Multiflex Trunk - T1/E1 on Slot 0 SubSlot 0", DESCR: "VWIC3-1MFT-T1/E1 - 1-Port RJ-48 Multiflex Trunk - T1/E1"
    PID: VWIC3-1MFT-T1/E1  , VID: V01 , SN: FOC1745429E
    NAME: "2nd generation four port FXO voice interface daughtercard on Slot 0 SubSlot 1", DESCR: "2nd generation four port FXO voice interface daughtercard"
    PID: VIC2-4FXO         , VID: V04 , SN: FOC174279XY
    NAME: "2nd generation two port FXO voice interface daughtercard on Slot 0 SubSlot 2", DESCR: "2nd generation two port FXO voice interface daughtercard"
    PID: VIC2-2FXO         , VID: V03 , SN: FOC1745AP4H
    NAME: "PVDM3 DSP DIMM with 64 Channels on Slot 0 SubSlot 4", DESCR: "PVDM3 DSP DIMM with 64 Channels"
    PID: PVDM3-64          , VID: V01 , SN: FOC17453K9V
    NAME: "Internal Services Module with Services Ready Engine on Slot 0", DESCR: "Internal Services Module with Services Ready Engine"
    PID: ISM-SRE-300-K9    , VID: V02 , SN: FOC174782WY
    NAME: "C2921/C2951 AC Power Supply", DESCR: "C2921/C2951 AC Power Supply"
    PID: PWR-2921-51-AC    , VID: V03 , SN: DCA1738K05Q
    TYVM

  • Is it possible to install cue 8.6 on sre 900 with raid 1?

    Hi.
    Is it possible to install cue 8.6 on sre 900 with raid 1?

    Dear John
    Thanks for ur quick reply. I never used tis formum before, so I am sorry for being too unclear..
    Anyway, what  mean is this:
    I want to buy a new laptop as my old lap top has Windows XP and 'suffers' from a lot of things! On this old lap top I have installed Premiere Elements 10, and I just want to know if the 'old' version 10 will work in Windows 8, as it is not mentioned in the system requirements here:
    http://www.adobe.com/eeurope/products/photoshop-premiere-elements/tech-specs.html
    I hope it is more clear now?
    Thanks!
    Kathrine Schmeichel

  • I purchased standalone LR5 in December 2014 and installed on home computer.  I have a mobile home with a 2nd laptop and installed       on this one also.  However, I now get a message saying that the Develop module is disabled and I need to renew membersh

    Can anyone help me understand why the Develop module on my 2nd laptop is disabled and asking me to renew membership to reactive.  I have a standalone LR5 which I purchased in December 2014 on the Windows platform.  My 2nd laptop is in a different location to my home laptop and is in my holiday home where I would like to work on my photos when I am away from home.

    thanks for replying.  I purchased online from Adobe and they sent a confirmation email with order number and serial no along with the instructions for downloading. There was no indication at purchase that renewing membership was needed at any time and it's only 3 months since purchase. I have just returned home from my holiday home and checked my home laptop (primary and first installation) and all modules still enabled !!  As far as I understand I am able to install twice as long as not operating both at once. This would be impossible as holiday home with laptop no 2 is 60 miles away. When I installed on no 2, i opened the order email and was able to use the serial no again. Now however it is greyed out. I don't want the cloud version and hope this is not what I have.
    UPDATE 1 April 2015-   I have checked the system info in Lightroom on my first laptop installation (home) and it is definitely a perpetual licence.  I downloaded what I thought was my 2nd allowed download on my holiday home laptop using the original email instructions and serial number.  I checked the system info on this download and it was it is a cloud version!!!!  This doesn't make sense - anyone out there - can I download to 2 laptops in 2 different locations with a perpetual licence??

  • I have used lightroom for ~2 years and have lightroom 5.5 installed on a PC. Yesterday evening I uploaded a new set of photos which I cataloged and rated as usual. After that when I switched to the develop module trouble began. First thing was when using

    I have used lightroom for ~2 years and have lightroom 5.5 installed on a PC. Yesterday evening I uploaded a new set of photos which I cataloged and rated as usual. After that when I switched to the develop module trouble began. First thing was when using the crop tool the picture would disappear and only reappear once I closed the tool. Then exposure and White balance changes would change the histogram but not the appearance of the photo. Finally clipping was also not appearing on the picture. I first reuploaded the photos. No effect. Then I reinstalled lightroom. No effect. Help please!

    Try deleting your preferences file
    How do I delete the Lightroom Preferences file? - The Lightroom Queen Help Desk & Members Area - Powered by Kayako Resol…

  • Crystal Reports XI - Where to find the Merge Module and the Install Shield?

    Hi,
    I'm using CR XI with Delphi 2006 and I'm having problems with the client side instalation of the program.They say I have to install the Merge Modules through an Install Shield programs.
    Where to find this and how to use?
    Thanks!

    Hi,
    Install shield is a part of MS Windows not with the BusinessObjects so I was not able to find any BO document on it.
    I have searched over the internet and found some useful links about Install Shield for Windows:
    http://gormanonline.com/blogs/msidle/archive/2008/05/02/basic-introduction-to-installshield-and-windows-installer.aspx
    http://en.wikipedia.org/wiki/InstallShield
    Microsoft Windows includes registry-activated logging services to help diagnose Windows Installer issues. This article describes how to enable this logging service.
    Open the registry with Regedt32.exe and create the following path and keys:
    HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\Installer
    Reg_SZ: Logging
    Value: voicewarmup
    You can use this example:
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftwindowsInstaller]
    u201CLoggingu201D=u201Dvoicewarmupu201D
    The letters in the value field can be in any order. Each letter turns on a different logging mode. Each letteru2019s actual function is as follows for MSI version 1.1:
    v Verbose output
    o Out-of-disk-space messages
    i Status messages
    c Initial UI parameters
    e All error messages
    w Non-fatal warnings
    a Start up of actionsr Action-specific records
    m Out-of-memory or fatal exit information
    u User requests
    p Terminal properties
    + Append to existing file
    ! Flush each line to the log
    u201Cu201D - Wildcard, log all information except for the v option. To include the v option, specify u201C/lvu201C.
    Once activated, the log files that are generated may be found in your %TEMP% directory.
    Hope this will give you a clarification about Installation Shield for Windows.
    Regards,
    Deepti Bajpai

  • Installing SQL 2012 SP2 - The specified module could not be found. (Exception from HRESULT: 0x8007007E)

    Hi,
    I am trying to install the SQL 2012 SP2 in one of the servers. I am getting the error as :
    TITLE: SQL Server Setup failure.
    SQL Server Setup has encountered the following error:
    The specified module could not be found. (Exception from HRESULT: 0x8007007E)
    Error code 0x84B10001.
    The same setup is working in other servers, but on a particular server I am getting this error.
    Server configuration: Windows server 2008 r2 standard edition, servvice pack 1 , 64 bit OS
    How to fix this?
    Thanks

    Hi Venkatzeus,
    Based on my research, the issue is caused by that some .dll files are corrupt or missing during the installing of SQL Server 2012 SP2.
    In order to troubleshoot this issue, please view the detail error message in SQL Server Setup Log Files. We can read the Summary text under %programfiles%\Microsoft SQL Server\110\Setup Bootstrap\Log\, and the Detail text in the place %programfiles%\Microsoft
    SQL Server\110\Setup Bootstrap\Log\<YYYYMMDD_HHMM>\Detail.txt. For more details, please see:
    View and Read SQL Server Setup Log Files
    Besides, here are some similar issues for your references:
    https://social.technet.microsoft.com/Forums/en-US/29e3cef1-4699-4710-9aa5-d56cf4a279c5/the-specified-module-could-not-be-found-exception-from-hresult-0x8007007e-systemwindowsforms?forum=sqlanalysisservices
    https://social.technet.microsoft.com/Forums/en-US/b2faae67-19af-4f50-88c6-5a427556df3e/error-encountered-when-creating-new-integration-services-project-0x8007007e?forum=sqlintegrationservices
    Thanks,
    Katherine Xiong
    If you have any feedback on our support, please click
    here.
    Katherine Xiong
    TechNet Community Support

  • Trying to install the output module for Bridge CC but there is no extensions folder for Windows

    I am trying to install the output module for Bridge CC on a Windows system, but there is not an extensions folder in my Bridges CC folder. I have seen several discussions about this issue for Mac's but nothing on a PC. Suggestions that I could use to remedy this situation? - Thanks!

    For installing it please download the package as listed in the below mentioned link and follow the install instructions.
    http://helpx.adobe.com/bridge/kb/install-output-module-bridge-cc.html
    Make sure that you have the most recent version of Bridge CC(6.0.1) installed.
    Please follow the below mentioned steps:
    Copy the Adobe Output Module folder (not the AOM_Package_[OS] folder) into the Bridge CC Extensions folder in the appropriate location as mentioned:
    Windows 64-bit:                Go to C:\Program Files (x86)\Common Files\Adobe\Bridge CC ExtensionsWindows 32-bit:
                   Go to C:\Program Files\Common Files\Adobe\Bridge CC Extensions
    2.   Copy the AdobeOutputModule.workspace file into the Workspaces folder under the Bridge CC Extensions folder (location as mentioned in Step 1).
    Do let me know if this helps.
    Regards,
    Ashutosh

  • Help installing the OUTPUT MODULE

    I installed the download for the OUTPUT module in bridge, by following the directions on the adobe website.  The module name appears in the upper right of the screen, but nothing happens when I click on the name.  I put the module folder into the location ~/Library/Application Support/Adobe/Bridge CC folder.  I could not find a Bridge CC Extensions folder.  I BELIEVE I PUT IT INTO THE RIGHT LOCATION. 

    There is no Adobe Bridge CC 2014.  There are only Adobe Bridge CS6 and Adobe Bridge CC.   Adobe Bridge CC has been modified to invoke/work with Photoshop CC 2014. This is a problem for users that have both Photoshop CC and Photoshop CC 2014 installed.   From my previous append you should see where Adobe Output Module get installed on Window. I use the Adobe instructions for installing the output module into Adobe.  Here is what I downloaded and where the output module workspaces get installed.
    I see two options in the Adobe Bridge CC output module  PDF and some poor web Galleries.

  • Deskjet 2542 all in one error: 'the specified module could not be found' when installing to USB

    Installation proceeds OK until the USB cable is connected, when the error message is displayed and installation ceases.
    I have successfully istalled and run the printer on another XP PC of a similar age - ie old.
    I have upgraded the XP OS to SP3 with numerous updates;
    Checked that the USB ports read Data sticks OK;
    run a/v and malware programs, including Microsoft Safety Scanner;
    checked that USB drivers are up to date;
    uninstalled driver software and re-installed with software downloaded from HP;
    carried out the procedures detailed in HP Support Forum 4022116
    Error message the same.  
    This is for my elderly neighbour - help please!
    This question was solved.
    View Solution.

    Hi @bodger50,
    Welcome to the HP Forums! 
    I understand that your HP Deskjet 2542 gives you the error: 'the specified module could not be found' when installing to USB, on Windows XP.
    I would recommend going through the steps in this post, Re: Install Error "The system cannot find the file specified" (hpzprl40.exe). When you get to the printer install wizard section, just use the full feature software and drivers found at this website, HP Deskjet 2540 All-in-One Printer series Full Feature Software and Drivers. As the printer install wizard is only for Windows 7 and up.
    Hope this is helpful, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • How to install the RAM module in Tecra M1

    Hey
    Where do I find the place to instal RAM on my Tecra M1?

    Hi
    The memory modules are hidden under the keyboard.
    So you will have to remove the keyboard firstly to get access to the memory modules.
    The keyboard is fixed with two screws behind the thin plastic cover above the F1-F12 keys row.
    After the screws were removed you could lift out the keyboard and could remove the modules.
    But be careful: the insulator is covering the memory slots. So you will have to turn up the insulator firstly.
    Regards

  • Installing the "Output Module" on a Mac computer

    I'm REALLY new to Mac and need help installing the "output module" in bridge on my computer.  I'm using creative cloud if that matters.
    Thanks,
    Melinda

    You simply put the folder where you want (I put mine at the root level of my hard disk).
    The Sample files are set up to use the API from the parents folder, so there is nothing to worry about.
    Just open a sample project that looks compelling and start hacking. :)
    Regards,
    Jeshua Lacock, Owner
    phone: 877.240.1364

  • How can i vusualize the application Java in my system ? i have actually problems to install my bank's protection module -

    How can i vusualize the application Java in my system ? i have actually problems to install my bank's protection module … My computer is an Imac and the Operation System is OS X Mountain Lion 10.8.2 ... PLEASE HELP ... THANKS !!!

    Thanks about your advise but i can not change my bank accout ... this protection module will only works if i have the java installed in my imac ... I just bought the OS X Mountain Lion (10.8.2) new version and i can not see WHERE IS THIS JAVA ??? When i open my "system preferences / others / ... there is nothing  . My bank told  me that without this JAVA i Will not have my protection module. Can you help me  to find it in my Imac ???

  • Install CUE 8.6.1

    Hi,
    I have an ISM module with the wrong image (SRSV instead of normal CUE)
    I have downloaded "cue-vm-full-k9.SPA.sme.8.6.1.prt1" and I am using the command:
    service-module isM 0/0 install url ftp://cisco:[email protected]/cue-vm-full-k9.SPA.sme.8.6.1.prt1
    from the router global configuration mode.
    I get the following question:
    Delete the installed Cisco Survivable Remote Site Voicemail and proceed with new installation? [no]:
    I press y
    and then I see:
    %Error: Couldn't open ftp://*****:*****@10.1.10.1/cue-vm-full-k9.SPA.sme.8.6.1.prt1.install.sre
    Execution of script cue-vm-full-k9.SPA.sme.8.6.1.prt1.install.sre failed, installation aborted
    From the log files from freeftpd I can see that the router successfully connected, what I don't understand is that it searches fro the file:
    cue-vm-full-k9.SPA.sme.8.6.1.prt1.install.sre
    Anyway how can I install CUE 8.6.1 ?
    Thanks,
    JH

    OK, think I found it.
    I need to download the zip file and use all files.
    JH

  • 2911 ISM and CUE: Do I need to (re-)install CUE for GUI access?

    To all the experts out there, I am volunteering with a IPT (Voice) install for my Church.  They have a 2911ISR router, which I am trying to setup / configure for a small office configuration.
    The question is as stated:  Do I need to (re-)install CUE to get the GUI (web UI) to work?  It shipped with CUE 8.6.6 on the ISM-SRE-300-K9 module.  But I'm not sure if it is because the GUI isn't there or if I have configured the interfaces and route incorrectly.
    Here is the software list on the ISM:
    MACC-2911-CUE# sh soft inst his
    Software Installation History:
      Refer to install.log for more details
     2014-03-19 12:48:39  ***Install Command Issued*** Cmd:1 Opt:0, Pkg:cue-allapps.sme.8.6.6.pkg Url:ftp://10.1.1.1// Mode:1 Proto:1 Host:10.1.1.1
     2014-03-19 12:56:41  ***SOFTWARE CLEANED***
     Timestamp            Subsystem                Version          Description                          UID
     2014-03-19 12:56:42  Thirdparty               8.6.6            Service Engine Thirdparty Code       a3442277-7890-4782-9e6b-9d19efc1e0d8
     2014-03-19 12:56:42  Plug-in Enablement       8.6.6            Plug-in enablement pack              26bd663c-3e5a-43d9-a6c3-5441ce44941b
     2014-03-19 12:56:42  CUE Voicemail Language Support 8.6.6            Languages global pack                e2e81cc6-39b5-47e1-9f83-b83c897fc50c
     2014-03-19 12:56:42  Global                   8.6.6            Global manifest                      edceaf0b-a890-4045-9086-5452fac85eba
     2014-03-19 12:56:42  Infrastructure           8.6.6            Service Engine Infrastructure        a36e1be1-ce8a-4f53-ace7-1844262aa0b9
     2014-03-19 12:56:42  GPL Infrastructure       8.6.6            Service Engine GPL Infrastructure    9f112eb1-6f58-4dd4-8faa-8530467af3b9
     2014-03-19 12:56:42  Voice Mail               8.6.6            Voicemail application                8e7823e2-0e92-4470-8860-653246345f9d
     2014-03-19 12:56:42  CUE Voicemail UK English 8.6.6            British English language pack        fa803d25-9c89-4171-a14c-ec12d6ed6b8c
     2014-03-19 12:56:42  Bootloader (Secondary)   2.1.36           Service Engine Bootloader            9d7b26fb-21b2-416e-8b65-425c2f8da5d8
     2014-03-19 12:56:42  Installer                8.6.6            Installer                            a0fb9f0a-fa5c-4b21-a64c-0cb9d6379573
     2014-03-19 12:56:42  Core                     8.6.6            Service Engine OS Core               430f25f9-0fed-48a4-b362-823937138501
     2014-03-19 12:56:42  Auto Attendant           8.6.6            Service Engine Telephony Infrastructure e3db91b0-f47d-460c-ad22-65001a5d45a9
     2014-03-19 13:01:48  ***SOFTWARE CLEANED***
     Timestamp            Subsystem                Version          Description                          UID
     2014-03-19 13:06:40  ***SOFTWARE CLEANED***
     Timestamp            Subsystem                Version          Description                          UID
     2014-03-19 23:17:44  ***SOFTWARE CLEANED***
     Timestamp            Subsystem                Version          Description                          UID
     2014-03-19 23:41:53  ***SOFTWARE CLEANED***
     Timestamp            Subsystem                Version          Description                          UID
     2014-04-20 17:47:59  ***SOFTWARE CLEANED***
     Timestamp            Subsystem                Version          Description                          UID
      Refer to install.log for more details
    Can you confirm the GUI files are there, or are they missing; in which case I need to (re-)install CUE?
    Thanks in advance for any assistance you can provide.  It is greatly appreciated.

    Hi Kevin.  I do have that in place.
    maccrouter1#sh ip route
    Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
           D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
           N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
           E1 - OSPF external type 1, E2 - OSPF external type 2
           i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
           ia - IS-IS inter area, * - candidate default, U - per-user static route
           o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
           + - replicated route, % - next hop override
    Gateway of last resort is 192.168.1.1 to network 0.0.0.0
    S*    0.0.0.0/0 [1/0] via 192.168.1.1, GigabitEthernet0/0
          10.0.0.0/8 is variably subnetted, 11 subnets, 3 masks
    C        10.0.4.0/24 is directly connected, GigabitEthernet0/1.4
    L        10.0.4.1/32 is directly connected, GigabitEthernet0/1.4
    C        10.0.100.0/23 is directly connected, GigabitEthernet0/1.100
    L        10.0.100.1/32 is directly connected, GigabitEthernet0/1.100
    C        10.0.150.0/24 is directly connected, GigabitEthernet0/1.150
    L        10.0.150.1/32 is directly connected, GigabitEthernet0/1.150
    S        10.0.150.2/32 is directly connected, ISM0/0
    C        10.0.200.0/24 is directly connected, GigabitEthernet0/1.200
    L        10.0.200.1/32 is directly connected, GigabitEthernet0/1.200
    C        10.1.1.0/24 is directly connected, Loopback0
    L        10.1.1.1/32 is directly connected, Loopback0
          171.16.0.0/16 is variably subnetted, 2 subnets, 2 masks
    C        171.16.0.0/23 is directly connected, GigabitEthernet0/1.16
    L        171.16.0.1/32 is directly connected, GigabitEthernet0/1.16
          192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks
    C        192.168.1.0/24 is directly connected, GigabitEthernet0/0
    L        192.168.1.9/32 is directly connected, GigabitEthernet0/0
    Could the router side interface be the problem?  Here is how it is configured:
    interface GigabitEthernet0/1.150
     description $FW_INSIDE$
     encapsulation dot1Q 150
     ip address 10.0.150.1 255.255.255.0
     ip nat inside
     ip virtual-reassembly in
     zone-member security in-zone
     shutdown
    I should be working on the router in the morning, so unless something obvious is indicated in the above config listing, I'll post a new 'show run' as soon as I can.
    Thanks, Jim.

Maybe you are looking for

  • Batch Split in Inbound Delivery document

    Hello Friends,   In decentralized WM managed scenario, inbound delivery is created automatically when the storage location is HU managed.   In the current design, we need to use MIGO/MB1B transaction for replicating stocks into warehouse location, an

  • How to make dropdown menu selection create more text fields?

    I did some searching and am unable to find an answer for this. It could be because I don't know the name of what I'm trying to do (I'm a total LiveCycle Designer noob). I tried to find guides but they seem to be for newer versions of Designer (I'm us

  • Ipod nano shows folder with exclamation point. followed instructions....

    ....on the apple support but my Ipod wont work. I just got new speakers for it too. It was working fine. But then I plugged it into my computer and it wouldnt charge. and then I disconnected it and It shows me the folder with the exclamation mark. te

  • IPod Nano 6th Gen detected but not recognized

    Since recently, my IPod is not being recognized by iTunes (11.1.4.62 ). The error says that it is detected but not be identified properly. I went through all the troubleshooting steps including resetting my ipod, re-starting the driver, re-installing

  • How do I delete old WiFi Accounts?

    I have two Macs running Mavericks and an iPhone and iPad both running iOS 7. I can't delete old WiFi accounts with no password that I no longer wish to connect to. Every time I delete them in System Preferences, they keep coming back. I've disabled i