Installing federator switch cisco for many switch linksys slm 224g
currently I am the administrator of a network containing 6 linksys switch SLM224G... for optimal use I think bying and installing a federator switch cisco .. is it the right solution ? what is the best solution and what is the best Cisco product ?
I think your device is not Linksys. You may want to post this on this link: https://supportforums.cisco.com/
Similar Messages
-
Installing a unifying switch for many switchs linksys slm 224g
currently I am the administrator of a network containing 6 linksys switch SLM224G... for optimal use I think bying and installing a unifying switch cisco .. is it the right solution ? what is the best solution and what is the best Cisco product ?
I think your device is not Linksys. You may want to post this on this link: https://supportforums.cisco.com/
-
"It started malfunctioning so I uninstalled it".
That may have been necessary, may not have.
"I tried to reinstall and there is persistent error in installing. What is the problem?"
No clue.. you've not provided us any details.
"How can I solve this?"
Search these forums or google for the error occurring or post the error so that others can help you. -
I've been using Adobe Acrobat 7 for many years. I updated my full version of Acrobat 5 to get to 7. My hard drive crashed and I've been trying to reinstall Acrobat and it will not install. Adobe will not help because 7 is no longer supported. Does anyone know where I can go for help?
You won't be able to install your original Acrobat 7 at all, or use your original serial number. The server which used to allow this was switched off.
But assuming you have a compatible system, like Mac OS 5 or Windows XP, licensed users of Acrobat 7 can download a replacement and get a replacement serial number.
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 -
My switch Linksys srw224g4 has problem and I need someone help
Hello,
My switch Linksys srw224g4 has problem that it keeps rebooting continuously and cannot bootup successfuly. Can someone tell me how to fix this problem? Firmware version is 1.2.2b , boot version is 1.0.2
Here is console capture:
==================
------ Performing the Power-On Self Test (POST) ------
UART Channel Loopback Test........................PASS
Testing the System SDRAM..........................PASS
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
BOOT Software Version 1.0.2 Built 17-Aug-2006 14:55:46
Linksys SmartSwitch based on 88E6218 with ARM946E-S.
32MByte SDRAM. I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
100%
Decompressing SW from flash
100%
OK
Running from RAM...
*** Running SW Ver. 1.2.2b Date 20-Mar-2007 Time 11:44:49 ***
HW version is 00.03.00
Base Mac address is: 00:1d:7e:74:b6:14
Dram size is : 32M bytes
Dram first block size is : 16969K bytes
Dram first PTR is : 0xF6D840
Flash size is: 8M
01-Jan-2000 01:01:02 %CDB-I-LOADCONFIG: Loading startup configuration.
LZMA: Decompressing file failed!
HOSTG_rscode_file_load: could not load file
Device configuration:
Slot 1 - SRW24F4G HW Rev. 0.2
Tapi Version: v1.3.3.1
Core Version: v1.3.3.1
01-Jan-2000 01:01:09 %SYSLOG-F-OSFATAL:
L FATAL ERROR: ROOT: ABORT DATA exception
***** FATAL ERROR *****
SW Version : 1.2.2.16
Version Date: 20-Mar-2007
Version Time: 11:44:49
Instruction 0x121fc0
Exception vector 0x10
Program state register 0x20000013
***************** SYSTEM RESET *****************
------ Performing the Power-On Self Test (POST) ------
UART Channel Loopback Test........................PASS
Testing the System SDRAM..........................PASS
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
BOOT Software Version 1.0.2 Built 17-Aug-2006 14:55:46
Linksys SmartSwitch based on 88E6218 with ARM946E-S.
32MByte SDRAM. I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
100%
Decompressing SW from flash
100%
OK
Running from RAM...
*** Running SW Ver. 1.2.2b Date 20-Mar-2007 Time 11:44:49 ***
HW version is 00.03.00
Base Mac address is: 00:1d:7e:74:b6:14
Dram size is : 32M bytes
Dram first block size is : 16969K bytes
Dram first PTR is : 0xF6D840
Flash size is: 8M
01-Jan-2000 01:01:02 %CDB-I-LOADCONFIG: Loading startup configuration.
LZMA: Decompressing file failed!
HOSTG_rscode_file_load: could not load file
DelScr fatal Error: Invalid Variant type01-Jan-2000 01:01:03 %SYSLOG-F-OSFATAL: DelScr fatal Error
***** FATAL ERROR *****
Reporting Task: ROOT.
Software Version: 1.2.2b (date 20-Mar-2007 time 11:44:49)
***************** SYSTEM RESET *****************
Thanks,
TienHi,
Please follow the steps in this link to reload the image:
http://www.cisco.com/en/US/products/ps9967/products_qanda_item09186a0080a36371.shtml
And this is the link to download boot code 1.00.86:
http://ip.gliebetronics.com:800/firmware/Linksys%20SRW2024/Firmware/
Hope this help. -
Install Light Switch on Build server
I
am trying to install Light switch in windows MS build server and it seems to be looking for Visual Studio 2012?
Does
that mean, we will have to install complete visual studio 2012 in our ms build servers? we don't want to do that. Is there any work around available?
I Install
“Visual Studio Lightswitch 2012 Server Runtime and Local SQL” via Web Platform Installer but still it is looking for more dll and packages.
Thanks
GouravHi,
If you want to create lightswitch application, you need install visual studio.
When you install visual studio you could install lightswitch package like below picture shows you.
Besides, you could also follow below set up video to insall it:
https://www.youtube.com/watch?v=tWtwvOSaqJY&index=1&list=PLDF16C2F1E1D066C0
You could check below document to understand more about lightswitch.
https://msdn.microsoft.com/en-us/vstudio/htmlclient.aspx -
Trying to install MS Office 2011 for Mac SP 2 (14.2.0) on my Macbook Air (Lion 10.7.3). I have to close Microsoft Database Daemon and SyncServicesAgent but can not see how to do so. I have closed all applications. Can anyone help? Many thanks
Thanks Kurt! I had tried all that and had tried closing both programmes from the application monitor, but SyncServices Agent refused to close. I tried closing Launchd which is their mother application, but that just caused the screen go go blank. In the end the two programmes let themselves be closed next time I tried the installation process so all was well. Thanks for your help!
-
Installed 11.0.3 today. Tried to update apps. iTunes response was, "You can not update this software since you have not owned the major version of this software." I REALLY don't understand. I paid for MANY applications and stole or borrowed NOTHING.
Hi 969Polyglot969,
You may want to report an issue with the affected apps using the instructions in this article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933
I hope this helps!
- Ari -
I have installed hydra express plugin for Aperture many time with no success
I have installed hydra express plugin for Aperture many time with no success. When I select edit with plugin hydra, the make an HDR image with hydra appears. When I hit the process button a message states that hydra is not found. I have checked in my application support folder. There is no plugin folder for aperture or a hydra plugin.
Any help would be appreciated.Plug-ins get installed in one of two locations.
~/Library/Application Support/Aperture/Plug-Ins/Edit
or
/Library/Application Support/Aperture/Plug-Ins/Edit
The second is for all users of the machine and is located in the root folder of your system drive (often "Macintosh HD").
The first is your private library (note the ~ symbol which a shortcut to your user folder) and means the plugin is just for you. ~/Library is hidden by default so finder wont see it. To see it in Finder, use the menu "Go->Go to folder" and type in ~/Library as the folder name. Then you can natigate to /Application Support/ etc....
That should help you determine if it's installed. Note, you may only find an alias in the plug-in folder and the programs may actually be stored elsewhere. Also, if the Plugin can be used for export as well as edit, it might be located in /Plug-Ins rather than /Plug-Ins/Edit
In terms of why it isn't working, I think I may have a clue to what's going on. Sometimes plugins use utilitly shell commands that get distributed with the plugin. These can get quarantined by Macs Gatekeep security because they are not signed by a 'valid' developer.
I've recently taken on the task of making the old Enfuse plugin compatible with the latest version of Aperture, and ran into this gatekeep quarantine issue. I got around it by de-quarantine the required commands and got the plugin working.
For distribution, I've put an AppleScript together which installs the plugin and takes care of the quarantine issue, but I am just (literally today) tesing that on a different machine to make sure it works the same as it does on mine.
If you can first confirm that hydra is installed in one of the above locations, I'll then talk you through how to check if there is a quarantine issue with it.
-Andy -
I cannot send mail from Firefox. Can receive E-mail but cannot send it. This worked OK until today. I have had firefox for many years. Just reinstalled Mozilla and still cannot send E-mail from firefox.
I use comcast.net for E-mail,using Mozilla to get there.If your Office email account's SMTP authenticated?
Any error message provided and if so, what?
Are you also accessing an email account and SMTP server provided by SBCGlobal.net with either email client and if so, are you able to send messages with this account and SMTP server when connected to the internet via SBCGlobal.net at home?
And let me get this straight - both email clients work fine without any problems sending messages with your Office email account and SMTP server when connected to the internet at a friend's house that uses another ISP besides SBCGlobal.net but this is an Apple problem?
If an Apple problem, then you'd have problems sending messages with this account and SMTP server regardless whose network and ISP you are connected to.
Regardless what this more than likely under-trained or just unaware person at SBCGlobal.net told you, all ISPs have restrictions on using an SMTP server that is outside of their network or that isn't provided by the ISP used for connecting to the internet.
Some ISPs allow the use of an authenticated server only that is outside of their network but some block its use regardless.
Within the last year or so, SBCGlobal.net made a drastic change in regards to such restrictions and conveniently neglected to inform their customers beforehand. Those using an SMTP server that was outside of SBCGlobal.net's network regardless if the SMTP server was authenticated were required to "opt out" of Port 25 blocking with SBCGlobal.net in order to use an SMTP server that was outside of their network which was working fine before this change was made.
Have you opted out of Port 25 blocking with SBCGlobal.net? -
Installing an SSL certificate for a CSS 11503
I'm having the hardest time searching for clear instructions on how to request and install an SSL certificate for a CSS 11503 Content Switch. Can anyone help or point me in the right direction?
I'm also looking for instructions on how to replace an SSL certificate once it's been installed. Thanks!Allen,
The portion of the configuration guide related to SSL certificates and keys can be found here:
http://cisco.com/en/US/products/hw/contnetw/ps792/products_configuration_guide_chapter09186a00801eea82.html#1422544
To replace an SSL certificate, you'll need to remove the current certificate and re-import/create the new one.
~Zach -
I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go. The printer does'nt show up. I'm fairly new to the Mac, after switching from windows. I'm running Snow Leopard 10.6.8.
Hold down the option key and select
▹ System Information...
from the menu bar. In the window that opens, select
Hardware ▹ USB
from the list on the left. On the right you should now see a list of all connected USB devices, as well as some built-in components. Is the device shown? -
How to install several specified languages for Adobe Reader X
Hi guys, just question that how to silencely install several specified languages for Adobe Reader X?
I know some silence switch as below:
setup.exe /sAll /rs
=> Silencely install all supported languages
setup.exe /sAll /rs /sl "xxxx" (xxxx is LANG ID)
=> Silencely install one specified language only (defined by LANG ID)
Question:
If I would like to silencely install several specified languages, is there any other switch to do that?
Thank you all in advance.Hi,
I'm using Adobe Reader X MUI version and I tried your way but doesn't work unfortunately.
I attached the setup.ini content below =>
============
[Startup]
RequireOS=Windows 2000
RequireMSI=3.0
RequireIE=6.0.2600.0
[Product]
msi=AcroRead.msi
Languages=1033;1036
1033=English (United States)
1036=French (France)
[Windows 2000]
PlatformID=2
MajorVersion=5
ServicePackMajor=4
[MSI Updater]
Path=http://ardownload.adobe.com/pub/adobe/reader/win/8.x/8.0/misc/WindowsInstaller-KB893803-v2 -x86.exe
=============
And I used the switch of "Setup.exe /sAll /rs /ini "setup.ini""
My OS is Windows 7 Ultimate.
Thank you. -
How to install the OffLine Player for LSO
Hi ,
I looking for a documentation in order to install the OffLine Player for LSO , and also if the Learner Portal will propose the install on every PC ussing the Learner Portal ?
Thank you .Yes, there is a document in Service Marketplace which discusses this. I am only familiar with LSO 300.
https://websmp201.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000107422007E
I don't recall if it is on the standard course details page or not (we have done a lot of customization to our Learning Portal), but we have a separate section on our course type details page which reads as follows:
Download Course
You can play this course offline if you want, for example, on a laptop. To do so, you must download the content files to your computer. Please note the following:
- The actual download and subsequent display is done with the help of the Offline Player, which must be installed on your PC. Install Offline Player
- When you switch back to online playing, you can synchronize the progress you made offline with the data in the Learning Portal.
Download Course
Please note that there is a requirement to have the Java SDK loaded on the computer in order to deploy the Offline Player. This is big hassle to incorporate into the installation process, but we had our IT group create a batch program to 1st install the Java SDK, followed by installation of the Off-line player. -
Fatal Error During Solution Center Install - "Key Not Valid for Specified State"
I have encountered an error while trying to install HP Solution Center for my J6480 All-In-One. The software I'm installing is "OJJ6400_Full_10.exe"
I can get past the installation option selections (i.e., the screens that allow selection of which components you want installed) as well the online check for updates to the software. However, shortly after that I get a fatal error the full text of which are:
Error Situation Code: 23551631
The following lines were retrieved from the installation error logs.
Now Launching=X:\hpzmsi01.exe -m dot4wrp "-*"
".\autorun_network.inf" "-networkonly" -| XXX -f X:\DIVins??.DAT
Error message received: Key not valid for use in specified state.
X:\cioum32.msi failed with return code 1603
MSIInstall() failed with 1603
Exit code=1603
Your help is appreciated. Thanks.Hey @redleader74,
At this time I am going to have you unlock the hidden System Administrator Account and attempt an install under there. Ideally, if everything installs fine you should be able to log back into your normal User Account and the complete software and driver package for your HP Officejet J6480 All-in-One Printer will be installed and functional. Can I please have you follow the steps below.
Step 1: Uninstall Drivers:
Click on your Start menu
Select All Programs
Select the HP folder
Select your HP Officejet
Select Uninstall
Please follow any onscreen prompts to complete the uninstall. Once the uninstall is complete please proceed to the next step.
Step 2: Clear Temp Files:
Click on your Start menu
In the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboard
When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight.
Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item.
Close the Temp folder once it is emptied
Right click the Recycling Bin on your desktop and select Empty Recycling Bin
Step 3: Unlock System Administrator Account:
Click on your Start menu and under the 'search programs and files' box type CMD
CMD will populate as a search option above, just right click on it and 'run as administrator'
Once CMD (Command Prompt) opens, type net user administrator /active:yes and hit enter
Next, close CMD and restart your computer
When your computer comes on log into the new Account that should show. It will be called Administrator and will not have a password on it.
If your computer automatically logs into your account after restart than go to your start menu click the arrow beside 'shutdown' and choose 'switch user'. Now log into the Administrator Account we just unlocked
Step 4: Install Device:
Under the Administrator Account please click here to download the latest drivers for your printer.
Once the website opens select the Download button on the top left
Once the download is complete please follow the onscreen instructions to install your printer
Once the installation is complete, please test the functions of your HP Officejet to ensure that everything is functioning properly now. If everything installs fine, log out of the Administrator Account and back into your normal User Account. All the Software and Drivers for your product should show installed now on your Account. Once you're logged into your User Account please test your HP Officejet again to verify that your print and scan functions are still working.
If everything works fine, you will want to Hide the Administrator Account.
Go to your Start menu and under the 'search programs and files' box type CMD
CMD will populate as a search option above, just right click on it and 'run as administrator'
Once CMD (Command Prompt) opens, type net user administrator /active:no and hit enter
Next, close CMD and restart your computer
Please let me know if these steps resolve your issue. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!
Maybe you are looking for
-
Disk Utility verification says my HD is corrupt, MBP shutdowns unexpectedly
Hello, I just purchased my MBP in February and am ****** to be running into a problem only five months in owning the machine. I'm a little frantic right now as I am in South Africa for study abroad and do not have my installation disks with me (left
-
The file icon is not showing up in excel in the menu bar
The file command is not showing in the menu bar for excel 2011?
-
Approve CUP request in 10.0
Dear Experts, I have created a CUP request (ARM) in GRC 10.0 successfully. Now stage approver has to approve the request. I am really not sure where to approve the request. Please help me. I appreciate your help. Thanks, Swathi.
-
How to extract data from SAP 4.7 and upload data to SAP ECC 6.0
Hi, How to extract data from SAP 4.7 and upload data to SAP ECC 6.0? Can i use BDC,BAPI,LSMW? Help me please.
-
Please tell me some information about gmail
hi, everybody. I'm a long time OSX user but I never used the "mail." Now, I want to try mail with my gmail account but I found it's not that easy. First of all, what type of account is the gmail? IMAP, POP, or Exchange? Next, what is incoming mail se