Installing JVM 1.5 using jce_policy-1_4_2?
Hi Experts,
I will be installing JVM 1.5 using jre-1_5_0_22-windows-amd64.exe that i downloaded from this link http://java.sun.com/products/archive/ . Should I also download new version of jce_policy? or is it alright to use our current jce_policy which is jce_policy-1_4_2? Should i also pattern the version of jce_policy with the version of jvm/jre?
Thanks a lot!
Regards,
Tony
Thanks for the reply experts!
i got the Jce_policy from this site
https://cds.sun.com/is-bin/INTERSHOP.enfinity/WFS/CDS-CDS_Developer-Site/en_US/-/USD/ViewProductDetail-Start?ProductRef=jce_policy-1.5.0-oth-JPR@CDS-CDS_Developer
Regards,
Tony
Similar Messages
-
What JVM is being used in my Internet Explorer ?
I have a web-bases/java-bases application that does not work when JRE 1.4 is active.
I disable it for Internet Explorer in the Java Plug-In Console on the Browser tab and then things work fine.
How do I know what JVM is being used then ?
Some configuration info :
WinME, IE 6.0, JRE 1.4When you install JRE1.4.0, it asks if you want to link the JRE to IE and Netscape 6...if you answered yes, what it does is to create and automatically select a new option box in IE (see Tools-->Internet Options-->Advanced-->Java Sun-->Use JRE1.4.0...) -- if you elected not to link the JRE, the option box is not created.
Without the new option box, IE works like this:
1) Unless the applet has been converted with the HTMLConverter that comes with your SDK, IE will run the applet with its native JVM which is version 1.1.5.
2) If the HTML file has been converted, IE will check to see what version of the JRE is required and what is already on the system. If a different JRE is required, it will prompt the user to download the required JRE and then run the applet -- if the user doesn't want to do the download, the applet will simply fail to start.
Hope this helps!
;o)
V.V. -
Verify and re-install jvm if necessary
I'm attempting to install jvm in my 10.2.0.2 database on an aix 5.2 server. I ran the dbca and told it to install jvm and intermedia, but it just hung at 11%. So I cancelled it after about 45 minutes.
I found reference of the following selects to verify jvm has been installed:
sys@DMRDEV> select version, status, comp_id from dba_registry;
VERSION STATUS COMP_ID
10.2.0.2.0 VALID XDB
10.2.0.2.0 INVALID ORDIM
10.2.0.2.0 VALID EM
10.2.0.2.0 VALID CATALOG
10.2.0.2.0 VALID CATPROC
10.2.0.2.0 VALID JAVAVM
6 rows selected.
sys@DMRDEV> select dbms_java.longname('foo') from dual;
DBMS_JAVA.LONGNAME('FOO')
foo
sys@DMRDEV> select count(*) from dba_objects
2 WHERE object_type LIKE 'JAVA%';
COUNT(*)
15568
sys@DMRDEV> select owner, count(*)
2 from dba_objects
3 where object_type like 'JAVA%'
4 group by owner;
OWNER COUNT(*)
SYS 14114
ORDSYS 1454
sys@DMRDEV> SELECT dbms_java.longname(name)
2 FROM obj$
3 WHERE type# = 29 and status != 1;
DBMS_JAVA.LONGNAME(NAME)
oracle/ord/media/annotator/utils/MADataInputStream
oracle/ord/media/annotator/utils/Preferences
312 rows returned.
The fact that I cancelled the install and the 312 records returned by the last select make me think it didn't install correctly. I have searched for about 30 minutes now trying to figure out how to un-install or repair the jvm install, but can't find anything. Anyone have a link to some documentation on this? I think my initial problem might have been my JAVA_HOME, LD_LIBRARY_PATH, and PATH variables not pointing to an up to date java directory.disregard. i just restored and recovered from the backup that I took before messing it up.
for further reference if anyone else has the same problem I had to manually reload jvm and then install Oracle Text manually. The problem came up because this was a 9.2 database that didn't have either component installed when it was upgraded to 10g. I used metalink note 276554.1 for the jvm portion and 280713.1 for the Oracle Text part. For the jvm portion I only ran the part that installs jvm. -
MacBook Pro 8,1 – Intel Core i5 – 2.23 GHz (early 2011) New with OSX 10.6 – current on all updates.
I successfully installed rEFit. I used Boot Camp to install Win 7. All was great.
Then installed debian 6. Somehow after the debian install and restart (I know this sounds crazy) but I am now reduced to Win 7 only. rEFit is not present when rebooting nor is OSX or debian. Further, I am unable to force the install DVD to launch when rebooting, by holding C, D or F8. The Option key brings me to the grey screen with a padlock. I have attempted the root and local pw- no go. Restart holding D takes me to the windows boot manager. I have attempted several options within the Advanced Options; including – Repair Your computer, safe mode and “last known good config,” All of which did nothing.
I can see all my OSX files within win7. I tried to install the OSX within windows. Ya right, that did nothing..
I only desire to get back to OSX...
What are my options??Yes, you royally hosed up your machine.
You should first try to get your files off, any way you can to a external drive.
Your going to need to hold c and boot from the disk that came with your computer and a couple of screens in under the menu is a option for Disk Utility.
Select your drive and Erase with Security Option Zero, format the drive HFS+ Journaled and when that's finished (about a hour or so) then quit and install OS X from the installer.
I hope this works, but I suspect it won't. Others have hosed their machines trying to use a Linux disk without proper partition formatting too.
Another option might be to use another Mac to c boot off the Snow Leopard disk and install OS X onto a external drive, take that to the problem Mac and try holding option and booting off of it to erase your internal drive.
You could replace the drive.
frederick s wrote:
The Option key brings me to the grey screen with a padlock.
Is this holding option while booting?
There was someone else around here who hosed their Mac with a Linux disk too. Try to find it. -
Hello to all my readers.I am still using my Apple G4 1.25 Ghz MDD running Leopard 10.5.8 with iTunes 10.6.3 installed. Can I use an Phone 4s with iOS 5 with this set up? I have read the iPhone iOS 5 user guide and it appears that I can but is anybody actually doing it ? My current phone is a £10 Nokia and I've neither wish nor cash to spend more than a grand upgrading to an intel based machine (at the moment) ! Regards to you all.
If you can find an iPhone running iOS5 and those are the specs for iOS5, there is no reason it should not work.
If you want a more current version of iOS or a more current device, a Windows computer is always an option at significantly less cost.
Granted, there is no requirement to have a computer to use an iPhone. -
I wrote an install program (.exe) that is downloaded from a website. When run, it 1) leads a customer to browse to a directory, and 2) copies files (.exe, .dll, etc.) from a website to that directory. When I run, the installed program works.
What are the steps to make it seamless for a customer to use the install program and then use the installed program?
bhs67This site https://msdn.microsoft.com/en-us/library/vstudio/2kt85ked%28v=vs.110%29.aspx provides a basic description of the Visual Studio Windows Installer.
Near the bottom of the page is "You can unlock all the features of InstallShield by paying to upgrade to the full version of InstallShield." Where do I find info that describes the differences between the "free" and the "full"
versions?
bhs67
Hello,
The default feature does support the task for your requirement, so there is no need to pay for the other features unless you want to use some feature which is not free.
In addition, as this thread
InstallShield LE not available with VS 2012 RTM? shared, even through there is a link to InstallShield LE in the New Project dialog under Deployment solutions, but it belongs to third-party that I would recommend you consider posting this issue
at the following forum to get supports about InstallShield.
http://community.flexerasoftware.com/forumdisplay.php?133-InstallShield
Regards.
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How can I install Windows 8.1 using a USB Pen Drive in Late 2011 Macbook Pro with DVD R/W given.
How can I install Windows 8.1 using a USB Pen Drive in Late 2011 Macbook Pro with DVD R/W given.
I have Boot Camp 5.1.2 (497) and there is no option for installing using USB. I have downloaded an image of Windows 8.1 already.
I can't install using DVD R/W because it's not working.
Please help me.
Thank you.unlocked by myself
thanks -
Receive error 21 when trying to install lightroom cc 2015 using creative cloud
On trying to install Lightroom CC 2015 using Creative Cloud I receive error 21. Any ideas what to do??
I have the exact same issue. I had a trial of Lightroom 5 installed, and whenever I then tried to install Lightroom CC (2015) it would fail at 42% with an error 21. Logging out and back in of CC desktop got it to install successfully and then Lightroom 5 was marked as "Start Trail" again.
Now though, whenever I try to start Lightroom CC (2015) it shows the start splash screen and then closes straight away and doesn't start. The "Continue Trial/Purchase License" screen then appears, and closing that out does nothing.
I've tried logging out and back in to CC desktop, and restarting, but neither option fixes the issue. I even tried logging out, restarting then logging back in again. Still no joy.
As a side note: Lightroom 5 in CC desktop doesn't show an uninstall option - it says "Uninstall Unavailable". Both Photoshop CC and Lightroom CC do allow for an uninstall option though.
I'm on Mac OSX 10.10.3 -
I have replaced my ibook hard drive but when I start up I get a folder with a flashing question mark. I have tried installing the OSX disk using the "C" key but can't get any further than the flashing "?." What do I do? What is the problem?
Which iBook do you have?
http://support.apple.com/kb/HT1772?viewlocale=en_US
Which version of the OS is installed, and which version are you trying to install?
You could try starting up with Startup Manager and see if it will allow you to select the OS X install disc as the startup disk. If so, maybe you can proceed from there. I would recommend repairing the hard drive first since you are evidently having a bit of a problem with it. -
I have Lightroom 4 on disc which is installed on my Mac desktop. I want to use it on a new MacBook with no disc drive. Can I install it by download using the serial number? If so< how?
1. Go to the following website and download the last version of Lightroom 4:Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 4.4.1
2. Run the installation package to install Lightroom.
3. Use your existing serial number to activate the program. -
I have Elements 13 (I have the hard copy) installed on my iMac using Yosemite. I do all my iPhoto work on an external drive where I have copied my iPhoto Library, can I also install Elements 13 on my external harddrive or drag Elements 13 over from my iMac so that I can do work with Elements 13 via the exteranl hard drive? Thanks tb
Yes you can store images on an external hard dive and have them referenced in Organizer. It’s best to export copies to separate folders/subfolders and that will ensure iPhoto does not get corrupted.
Alternatively you could continue to use iPhoto with the Elements Editor set up in the iPhoto prefs as your external editing app. Then there is no need to use Organizer and no need to duplicate your images.
You can then call up photos directly from iPhoto as normal with the additional option e.g.
Double-click on a thumbnail to edit in iPhoto editor.
Control (right) - click on a thumbnail to edit in the elements app.
http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-iphoto-mac-os.html -
Can not install windows 7 pro using boot camp as mouse and keyboard will not work Help please
I have a new iMac and trying to install Windows 7 Pro using boot camp. I have reached the stage of starting to load windows from the DVD then discovered the mouse and the keyboards not working so I could not interact with windows installation.
Open, if not so already, the Windows formatter. Identify the BC Windows partition. It will be the one listed with the proper size you created and/or will be labeled as a C: drive. Be careful you select the right one or you may be corrupting the entire drive.
Format the partition as NTFS. -
I am reinstalling W7 on my iMac and keep getting the black screen. I had installed W7 before when using Snow Leapord but W7 doesn't want to install with the latest drivers (v4.0). W7 was working with Lion but I had to uninstall W7 and now I cannot reinstall.
NOTE: Just discovered that Adobe is making a bigger mess than any previously.
They now have a 32-bit uninstaller for Flash '''''AND''''' a separate 64-bit uninstaller for Flash. You will need the 64-bit uninstaller for what you had installed above.
*32-bit uninstaller: http://download.macromedia.com/pub/flashplayer/current/uninstall_flash_player_32bit.exe
*64-bit uninstaller: download.macromedia.com/pub/flashplayer/current/uninstall_flash_player_64bit.exe -
How to monitor MySQL Server installed in Windows Server using Nagios
You can do this via NSClient as Gary posted. The NSClient is a communications system that allows nagios to send commands to a target system over the nsclient protocol and they are executed on the remote system. You will still have to build some kind of vbscript or plugin to run on the target system to do the actual query to check on mysql.There are other options to. If you enable snmp on your target computer you can use a few nagios plugins to query the snmp agent on the target computer to see if a service is running. To do this via snmp you will need this plugin "check_snmp_process.pl" fromthis site.Your check command will look something like this:check_win_process:= check_snmp_process.pl -H $HOSTADDRESS$ -C "$USER6$" -n "$ARG1$" -w $ARG2$ -c $ARG3$The service definition will be like this:check_win_process!sqlservr!0!0This will check...
I installed Nagios Core in my Ubuntu workstation 10.04 for me to learn something new in my craft. I use this now to monitor our Windows Server 2008 with MySQL server installed as well as our Datalink Switch (DGS-1210-24). I searched on google on how to monitor a MYSQL server installed in Windows server using Nagios Core but i could not seem to find any. Could anybody who's expert in Nagios give me steps on how to do so. Thanks. All i found in google were steps in monitoring mysql installed in linux and nothing in windows server.
This topic first appeared in the Spiceworks Community -
Can off JVM heap Memory used in the Near-Cache front-tier
I had tried to config a near-Cache used nio-manager(off JVM heap) in the Front-tier.
<near-scheme>
<scheme-name>CohApp-near</scheme-name>
<front-scheme>
<external-scheme>
</external-scheme>
</front-scheme>
<back-scheme>
<distributed-scheme>
<scheme-ref>CohApp-distributed</scheme-ref>
</distributed-scheme>
</back-scheme>
<invalidation-strategy>auto</invalidation-strategy>
<autostart>true</autostart>
</near-scheme>
when start 'com.tangosol.net.DefaultCacheServer' for this config, error as:
Oracle Coherence Version 3.7.1.0 Build 27797
Enterprise Edition: Development mode
Copyright (c) 2000, 2011, Oracle and/or its affiliates. All rights reserved.
2014-03-30 16:34:17.518/1.201 Oracle Coherence EE 3.7.1.0 <Error> (thread=main,
member=n/a): Error org.xml.sax.SAXParseException: cvc-complex-type.2.4.a: Invali
d content was found starting with element 'external-scheme'. One of '{"http://xm
lns.oracle.com/coherence/coherence-cache-config":local-scheme, "http://xmlns.ora
cle.com/coherence/coherence-cache-config":class-scheme}' is expected. - line 92
Exception in thread "main" (Wrapped: Failed to load the factory) (Wrapped: Missi
ng or inaccessible constructor "com.tangosol.net.DefaultConfigurableCacheFactory
(String)"
<configurable-cache-factory-config>
<class-name>com.tangosol.net.DefaultConfigurableCacheFactory</class-name>
<init-params>
<init-param>
<param-type>java.lang.String</param-type>
<param-value>coherence-cache-config.xml</param-value>
</init-param>
</init-params>
</configurable-cache-factory-config>) java.lang.reflect.InvocationTargetExceptio
n
at com.tangosol.util.Base.ensureRuntimeException(Base.java:288)
at com.tangosol.net.ScopedCacheFactoryBuilder.getDefaultFactory(ScopedCa
cheFactoryBuilder.java:311)
at com.tangosol.net.DefaultCacheFactoryBuilder.getSingletonFactory(Defau
ltCacheFactoryBuilder.java:48)
at com.tangosol.net.DefaultCacheFactoryBuilder.getFactory(DefaultCacheFa
ctoryBuilder.java:121)
at com.tangosol.net.ScopedCacheFactoryBuilder.getConfigurableCacheFactor
y(ScopedCacheFactoryBuilder.java:112)
at com.tangosol.net.CacheFactory.getConfigurableCacheFactory(CacheFactor
y.java:126)
at com.tangosol.net.DefaultCacheServer.getDefaultConfigurableCacheFactor
y(DefaultCacheServer.java:364)
at com.tangosol.net.DefaultCacheServer.main(DefaultCacheServer.java:197)
Caused by: (Wrapped: Missing or inaccessible constructor "com.tangosol.net.Defau
ltConfigurableCacheFactory(String)"
<configurable-cache-factory-config>
<class-name>com.tangosol.net.DefaultConfigurableCacheFactory</class-name>
<init-params>
<init-param>
<param-type>java.lang.String</param-type>
<param-value>coherence-cache-config.xml</param-value>
</init-param>
</init-params>
</configurable-cache-factory-config>) java.lang.reflect.InvocationTargetExceptio
n
at com.tangosol.util.Base.ensureRuntimeException(Base.java:288)
at com.tangosol.run.xml.XmlHelper.createInstance(XmlHelper.java:2652)
at com.tangosol.run.xml.XmlHelper.createInstance(XmlHelper.java:2536)
at com.tangosol.net.ScopedCacheFactoryBuilder.getDefaultFactory(ScopedCa
cheFactoryBuilder.java:273)
... 6 more
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstruct
orAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingC
onstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at com.tangosol.util.ClassHelper.newInstance(ClassHelper.java:694)
at com.tangosol.run.xml.XmlHelper.createInstance(XmlHelper.java:2611)
... 8 more
Caused by: (Wrapped: Failed to load cache configuration: coherence-cache-config.
xml) (Wrapped) java.io.IOException: Exception occurred during schema validation:
cvc-complex-type.2.4.a: Invalid content was found starting with element 'externa
l-scheme'. One of '{"http://xmlns.oracle.com/coherence/coherence-cache-config":l
ocal-scheme, "http://xmlns.oracle.com/coherence/coherence-cache-config":class-sc
heme}' is expected.
at com.tangosol.util.Base.ensureRuntimeException(Base.java:288)
at com.tangosol.run.xml.XmlHelper.loadResourceInternal(XmlHelper.java:34
1)
at com.tangosol.run.xml.XmlHelper.loadFileOrResource(XmlHelper.java:283)
at com.tangosol.net.DefaultConfigurableCacheFactory.loadConfig(DefaultCo
nfigurableCacheFactory.java:439)
at com.tangosol.net.DefaultConfigurableCacheFactory.loadConfig(DefaultCo
nfigurableCacheFactory.java:425)
at com.tangosol.net.DefaultConfigurableCacheFactory.<init>(DefaultConfig
urableCacheFactory.java:155)
... 14 more
Caused by: (Wrapped) java.io.IOException: Exception occurred during schema valid
ation:
cvc-complex-type.2.4.a: Invalid content was found starting with element 'externa
l-scheme'. One of '{"http://xmlns.oracle.com/coherence/coherence-cache-config":l
ocal-scheme, "http://xmlns.oracle.com/coherence/coherence-cache-config":class-sc
heme}' is expected.
at com.tangosol.run.xml.XmlHelper.loadXml(XmlHelper.java:122)
at com.tangosol.run.xml.XmlHelper.loadXml(XmlHelper.java:157)
at com.tangosol.run.xml.XmlHelper.loadResourceInternal(XmlHelper.java:32
2)
... 18 more
Caused by: java.io.IOException: Exception occurred during schema validation:
cvc-complex-type.2.4.a: Invalid content was found starting with element 'externa
l-scheme'. One of '{"http://xmlns.oracle.com/coherence/coherence-cache-config":l
ocal-scheme, "http://xmlns.oracle.com/coherence/coherence-cache-config":class-sc
heme}' is expected.
at com.tangosol.run.xml.SimpleParser.parseXml(SimpleParser.java:212)
at com.tangosol.run.xml.SimpleParser.parseXml(SimpleParser.java:93)
at com.tangosol.run.xml.SimpleParser.parseXml(SimpleParser.java:162)
at com.tangosol.run.xml.SimpleParser.parseXml(SimpleParser.java:115)
at com.tangosol.run.xml.XmlHelper.loadXml(XmlHelper.java:118)
... 20 more
Caused by: org.xml.sax.SAXParseException: cvc-complex-type.2.4.a: Invalid conten
t was found starting with element 'external-scheme'. One of '{"http://xmlns.orac
le.com/coherence/coherence-cache-config":local-scheme, "http://xmlns.oracle.com/
coherence/coherence-cache-config":class-scheme}' is expected.
at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAX
ParseException(ErrorHandlerWrapper.java:195)
at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error(Err
orHandlerWrapper.java:131)
at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(
XMLErrorReporter.java:384)
at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(
XMLErrorReporter.java:318)
at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator$XSIErro
rReporter.reportError(XMLSchemaValidator.java:417)
at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.reportS
chemaError(XMLSchemaValidator.java:3182)
at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.handleS
tartElement(XMLSchemaValidator.java:1806)
at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.startEl
ement(XMLSchemaValidator.java:705)
at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.scan
StartElement(XMLNSDocumentScannerImpl.java:400)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImp
l$FragmentContentDriver.next(XMLDocumentFragmentScannerImpl.java:2756)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(X
MLDocumentScannerImpl.java:648)
at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next
(XMLNSDocumentScannerImpl.java:140)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImp
l.scanDocument(XMLDocumentFragmentScannerImpl.java:511)
at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(X
ML11Configuration.java:808)
at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(X
ML11Configuration.java:737)
at com.sun.org.apache.xerces.internal.jaxp.validation.StreamValidatorHel
per.validate(StreamValidatorHelper.java:144)
at com.sun.org.apache.xerces.internal.jaxp.validation.ValidatorImpl.vali
date(ValidatorImpl.java:111)
at javax.xml.validation.Validator.validate(Validator.java:127)
at com.tangosol.run.xml.SaxParser.validateXsd(SaxParser.java:236)
at com.tangosol.run.xml.SimpleParser.parseXml(SimpleParser.java:206)
So I think that if can off JVM heap Memory used in the Near-Cache front-tier?
Or can help how to config the off JVM heap Memory used in the Near-Cache front-tier.
Thanks.Only local-scheme and class-scheme can be used in the front-scheme of a near cache.
Maybe you are looking for
-
Hi I have tried to center allign using css as described in a tutorial cafetownsend by adobe. However, it doesn't seem to work. I added the link to the css stylesheet and put the dive tag in but it doesn't allign to center. This is the css #wrapper {
-
Re the instructions above, if I click on the exit button, Firefox closes. What do I do next????? Sorry, but this doesn't appear to be able to give instructions to novice users, HELP, Before I close FF, and, once again lose all my information, please
-
Can't Install software update for Nokia 305
While updating my phone software, I can't install it and had the message "There is a problem with installing software to your phone. Error code : 12052". Plz. fix it.
-
I cannot download flash. I have windows 7 and using explorer.
I cannot download flash. I have windows 7 and using explorer. When I download flash, it tells me that the download is successful but it isn't. When I try to save it it is not saved where it tells me that it is saved. I downloaded reader and that
-
Comment, à parir d'un programme labview peut-on ecrire dans un port serie rs232
Bonjour, je suis actuellement en stage et je cherche à réaliser un programme labview permettant d'imiter un capteur donnant une profondeur et une altitude. les informations sont à envoyées à un programme labview sur compact RIO via une liaison RS 232