Installing Novell Client fails due to 'untrusted signer'

I am trying to update Novell Client on our Windows 7 workstations, using a Zenworks bundle. This method has worked in the past: copy the installation files to c:\temp\zeninstall\clnt2sp3ir5 (including appropriately modified NovellClientProperties.txt and install.ini) and then just launch "setup.exe /ncpf" as secure system user.
This time I noticed that the new client was only partially installed. When viewing Novell Client properties it shows the new version, however, some files are definitely from the previous client version (for example C:\Windows\System32\lgnwnt32.dll).
I dug up c:\windows\inf\setupapi.dev.log and it seems that installation was aborted due to "unsigned driver package":
Code:
sto: Validating driver package files against catalog 'netnvcli.cat'.
!!! sto: Driver package signer is unknown. Assuming untrusted signer. Error = 0x800F0242
!!! ndv: Driver package failed signature validation. Error = 0xE0000242
sto: {DRIVERSTORE_IMPORT_NOTIFY_VALIDATE exit(0xe0000242)} 12:37:47.960
!!! sto: Driver package failed signature verification. Error = 0xE0000242
!!! sto: Failed to import driver package into Driver Store. Error = 0xE0000242
sto: {Stage Driver Package: exit(0xe0000242)} 12:37:48.225
!!! sto: Failed to stage driver package to Driver Store. Error = 0xE0000242, Time = 6521 ms
sto: {Import Driver Package: exit(0xe0000242)} 12:37:49.973
inf: Opened INF: 'c:\temp\zeninstall\novell_client\c2sp3ir5\netnvcli.inf' ([strings])
! inf: Add to Driver Store unsuccessful
! inf: Error 0xe0000242: The publisher of an Authenticode(tm) signed catalog has not yet been established as trusted.
!!! inf: returning failure to SetupCopyOEMInf
<<< Section end 2014/02/11 12:37:51.439
<<< [Exit status: FAILURE(0xe0000242)]
If I run the installation manually, I am prompted at one point about unsigned driver and whether I want to install it. If I answer "yes", the installation is successful.
Looking at Windows' certificate store on our computers, I see under "Trusted Publishers" a certificate issued to Novell, Inc by "Verisign Class 3 Code Signing 2009-2 CA", but that certificate expired on 27.04.2013.
How can I obtain and deploy the certificate that would allow the silent installation of Novell Client 2 SP3 IR5 to proceed? Or am I going about this in an entirely wrong way?

Originally Posted by vatson
I am trying to update Novell Client on our Windows 7 workstations, using a Zenworks bundle. This method has worked in the past: copy the installation files to c:\temp\zeninstall\clnt2sp3ir5 (including appropriately modified NovellClientProperties.txt and install.ini) and then just launch "setup.exe /ncpf" as secure system user.
This time I noticed that the new client was only partially installed. When viewing Novell Client properties it shows the new version, however, some files are definitely from the previous client version (for example C:\Windows\System32\lgnwnt32.dll).
I dug up c:\windows\inf\setupapi.dev.log and it seems that installation was aborted due to "unsigned driver package":
Code:
sto: Validating driver package files against catalog 'netnvcli.cat'.
!!! sto: Driver package signer is unknown. Assuming untrusted signer. Error = 0x800F0242
!!! ndv: Driver package failed signature validation. Error = 0xE0000242
sto: {DRIVERSTORE_IMPORT_NOTIFY_VALIDATE exit(0xe0000242)} 12:37:47.960
!!! sto: Driver package failed signature verification. Error = 0xE0000242
!!! sto: Failed to import driver package into Driver Store. Error = 0xE0000242
sto: {Stage Driver Package: exit(0xe0000242)} 12:37:48.225
!!! sto: Failed to stage driver package to Driver Store. Error = 0xE0000242, Time = 6521 ms
sto: {Import Driver Package: exit(0xe0000242)} 12:37:49.973
inf: Opened INF: 'c:\temp\zeninstall\novell_client\c2sp3ir5\netnvcli.inf' ([strings])
! inf: Add to Driver Store unsuccessful
! inf: Error 0xe0000242: The publisher of an Authenticode(tm) signed catalog has not yet been established as trusted.
!!! inf: returning failure to SetupCopyOEMInf
<<< Section end 2014/02/11 12:37:51.439
<<< [Exit status: FAILURE(0xe0000242)]
If I run the installation manually, I am prompted at one point about unsigned driver and whether I want to install it. If I answer "yes", the installation is successful.
Looking at Windows' certificate store on our computers, I see under "Trusted Publishers" a certificate issued to Novell, Inc by "Verisign Class 3 Code Signing 2009-2 CA", but that certificate expired on 27.04.2013.
How can I obtain and deploy the certificate that would allow the silent installation of Novell Client 2 SP3 IR5 to proceed? Or am I going about this in an entirely wrong way?
You need to install the newest client (that have a never certificate) on a device and then export it from that machine, after that you import it on the devices you want to install the client before running setup.exe.
Thomas

Similar Messages

  • Install Novell Client and ZFD client question

    Currently I am doing an unattended install of the Novell client and then a
    login script install of the ZFD client. Is there a way to install the novell
    client and then kick off the install of the ZFD client before rebooting? Or
    would this cause more trouble then its worth?
    Thanks for the help.
    Rich

    Rhuhman,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Upgrade of 700MB fails due to Package signing

    Downloaded much but received error message regarding package signing.  Nothing was installed...........
    My pacman.conf has ...SigLevel = Never... so am wondering how I can be in error for package signing?
    Is it now mandatory?

    Sorry my oops.  Will try again.....
    # /etc/pacman.conf
    # See the pacman.conf(5) manpage for option and repository directives
    # GENERAL OPTIONS
    [options]
    # The following paths are commented out with their default values listed.
    # If you wish to use different paths, uncomment and update the paths.
    #RootDir = /
    #DBPath = /var/lib/pacman/
    #CacheDir = /var/cache/pacman/pkg/
    #LogFile = /var/log/pacman.log
    #GPGDir = /etc/pacman.d/gnupg/
    HoldPkg = pacman glibc
    # If upgrades are available for these packages they will be asked for first
    SyncFirst = pacman
    #XferCommand = /usr/bin/curl -C - -f %u > %o
    #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
    #CleanMethod = KeepInstalled
    Architecture = auto
    # Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
    #IgnorePkg =
    #IgnoreGroup =
    #NoUpgrade =
    #NoExtract =
    # Misc options
    #UseSyslog
    #UseDelta
    #TotalDownload
    CheckSpace
    #VerbosePkgLists
    # PGP signature checking
    # NOTE: None of this will work without running `pacman-key --init` first.
    # The compiled in default is equivalent to the following line. This requires
    # you to locally sign and trust packager keys using `pacman-key` for them to be
    # considered valid.
    #SigLevel = Optional TrustedOnly
    # If you wish to check signatures but avoid local sign and trust issues, use
    # the following line. This will treat any key imported into pacman's keyring as
    # trusted.
    #SigLevel = Optional TrustAll
    # For now, off by default unless you read the above.
    SigLevel = Never
    # REPOSITORIES
    # - can be defined here or included from another file
    # - pacman will search repositories in the order defined here
    # - local/custom mirrors can be added here or in separate files
    # - repositories listed first will take precedence when packages
    # have identical names, regardless of version number
    # - URLs will have $repo replaced by the name of the current repo
    # - URLs will have $arch replaced by the name of the architecture
    # Repository entries are of the format:
    # [repo-name]
    # Server = ServerName
    # Include = IncludePath
    # The header [repo-name] is crucial - it must be present and
    # uncommented to enable the repo.
    # The testing repositories are disabled by default. To enable, uncomment the
    # repo name header and Include lines. You can add preferred servers immediately
    # after the header, and they will be used before the default mirrors.
    #[testing]
    #SigLevel = PackageRequired
    #Include = /etc/pacman.d/mirrorlist
    [core]
    #SigLevel = PackageRequired
    Include = /etc/pacman.d/mirrorlist
    [extra]
    #SigLevel = PackageOptional
    Include = /etc/pacman.d/mirrorlist
    #[community-testing]
    #SigLevel = PackageRequired
    #Include = /etc/pacman.d/mirrorlist
    [community]
    #SigLevel = PackageOptional
    Include = /etc/pacman.d/mirrorlist
    # If you want to run 32 bit applications on your x86_64 system,
    # enable the multilib repositories as required here.
    #[multilib-testing]
    #SigLevel = PackageRequired
    #Include = /etc/pacman.d/mirrorlist
    #[multilib]
    SigLevel = PackageOptional
    Include = /etc/pacman.d/mirrorlist
    # An example of a custom package repository. See the pacman manpage for
    # tips on creating your own repositories.
    #[custom]
    #SigLevel = Optional TrustAll
    #Server = file:///home/custompkgs

  • Install grid infrastructure fails due to oracle net configuration a failure

    hello guys,
    I installed software only then tried to install grid infrastructure standalone server along with ASM then i got an error
    [main] [ 2010-10-16 05:13:15.094 EET ] [RuntimeExec.runCommand:164] CRS-212: Resource 'ora.crsd' is not registered.
    [main] [ 2010-10-16 05:13:15.095 EET ] [RuntimeExec.runCommand:170] RunTimeExec: error>
    [main] [ 2010-10-16 05:13:15.097 EET ] [RuntimeExec.runCommand:192] Returning from RunTimeExec.runCommand
    [main] [ 2010-10-16 05:13:15.104 EET ] [ConfigureListener.setListenerParam:1779] Setting ADR_BASE_LISTENER: /oracle/app/oracle
    [main] [ 2010-10-16 05:13:15.284 EET ] [EndpointsImpl.<init>:276] Get listener endpoints from TCP:1521
    [main] [ 2010-10-16 05:13:15.286 EET ] [EndpointsImpl.<init>:302] Token count is 1
    [main] [ 2010-10-16 05:13:15.312 EET ] [EndpointsImpl.<init>:324] LsnrProtocol type = TCP, values = 1521
    [main] [ 2010-10-16 05:13:15.318 EET ] [EndpointsImpl$LsnrProtocol.addPortValue:86] Calling parseInt to check 1521
    [main] [ 2010-10-16 05:13:15.319 EET ] [EndpointsImpl$LsnrProtocol.addPortValue:97] Get port number 1521
    [main] [ 2010-10-16 05:13:15.469 EET ] [Version.isPre:274] version to be checked 11.2.0.1.0 major version to check against10
    [main] [ 2010-10-16 05:13:15.471 EET ] [Version.isPre:285] isPre.java: Returning FALSE
    [main] [ 2010-10-16 05:13:15.472 EET ] [OCR.loadLibrary:308]
    Inside constructor of OCR
    [main] [ 2010-10-16 05:13:15.482 EET ] [OCR.isCluster:939] Calling OCRNative for isCluster()
    [main] [ 2010-10-16 05:13:15.486 EET ] [OCR.isCluster:943] OCR Result status = true
    [main] [ 2010-10-16 05:13:15.487 EET ] [OCR.isCluster:955] Bolean result = false
    [main] [ 2010-10-16 05:13:15.505 EET ] [Version.isPre:274] version to be checked 11.2.0.1.0 major version to check against10
    [main] [ 2010-10-16 05:13:15.527 EET ] [Version.isPre:285] isPre.java: Returning FALSE
    [main] [ 2010-10-16 05:13:15.530 EET ] [OCR.loadLibrary:308]
    Inside constructor of OCR
    [main] [ 2010-10-16 05:13:15.533 EET ] [OCR.isCluster:939] Calling OCRNative for isCluster()
    [main] [ 2010-10-16 05:13:15.535 EET ] [OCR.isCluster:943] OCR Result status = true
    [main] [ 2010-10-16 05:13:15.536 EET ] [OCR.isCluster:955] Bolean result = false
    [main] [ 2010-10-16 05:13:15.581 EET ] [HASContext.<init>:100] moduleInit = 67
    [main] [ 2010-10-16 05:13:15.583 EET ] [sPlatform.isHybrid:67] osName=Linux osArch=i386 rc=false
    [main] [ 2010-10-16 05:13:15.590 EET ] [sPlatform.isHybrid:67] osName=Linux osArch=i386 rc=false
    [main] [ 2010-10-16 05:13:15.591 EET ] [Library.load:254] Loading library /oracle/app/oracle/product/11.2.0/grid/lib/libsrvmhas11.so
    [main] [ 2010-10-16 05:13:15.967 EET ] [CRSNativeResult.addComp:162] add comp: name ora.LISTENER.lsnr, rc 210, msg CRS-0210: Could not find resource 'ora.LISTENER.lsnr'.
    [main] [ 2010-10-16 05:13:16.020 EET ] [CRSNative.isEntityRegistered:672] entity: ora.LISTENER.lsnr, type: 1, registered: false
    [main] [ 2010-10-16 05:13:16.099 EET ] [Version.isPre:274] version to be checked 11.2.0.1.0 major version to check against10
    [main] [ 2010-10-16 05:13:16.101 EET ] [Version.isPre:285] isPre.java: Returning FALSE
    [main] [ 2010-10-16 05:13:16.102 EET ] [OCR.loadLibrary:308]
    Inside constructor of OCR
    [main] [ 2010-10-16 05:13:16.103 EET ] [OCR.isCluster:939] Calling OCRNative for isCluster()
    [main] [ 2010-10-16 05:13:16.108 EET ] [OCR.isCluster:943] OCR Result status = true
    [main] [ 2010-10-16 05:13:16.109 EET ] [OCR.isCluster:955] Bolean result = false
    [main] [ 2010-10-16 05:16:25.268 EET ] [PortAvailableCommand.execute:198] Port 1521 is available on node primary.localdomain
    [main] [ 2010-10-16 05:16:25.297 EET ] [NodeAppsFactoryImpl.checkPortHelper:1525] port=1521 availability status=true across nodeList=local node
    [main] [ 2010-10-16 05:16:25.848 EET ] [CRSNativeResult.addComp:162] add comp: name ora.listener.type, rc 210, msg CRS-0210: Could not find resource 'ora.listener.type'.
    [main] [ 2010-10-16 05:16:25.861 EET ] [CRSNative.isEntityRegistered:672] entity: ora.listener.type, type: 2, registered: false
    [main] [ 2010-10-16 05:16:26.028 EET ] [CRSNativeResult.addComp:162] add comp: name ora.local_resource.type, rc 210, msg CRS-0210: Could not find resource 'ora.local_resource.type'.
    [main] [ 2010-10-16 05:16:26.038 EET ] [CRSNative.isEntityRegistered:672] entity: ora.local_resource.type, type: 2, registered: false
    [main] [ 2010-10-16 05:16:26.222 EET ] [CRSNativeResult.addComp:162] add comp: name ora.local_resource.type, rc 210, msg CRS-0210: Could not find resource 'ora.local_resource.type'.
    [main] [ 2010-10-16 05:16:26.231 EET ] [CRSNative.isEntityRegistered:672] entity: ora.local_resource.type, type: 2, registered: false
    [main] [ 2010-10-16 05:16:26.246 EET ] [CRSNative.register:1133] About to register: name: ora.local_resource.type, type: 2, update: false, force: false
    [main] [ 2010-10-16 05:16:26.384 EET ] [CRSNative.register:1141] Name: 'ALIAS_NAME', Value: ''
    [main] [ 2010-10-16 05:16:26.413 EET ] [CRSNative.register:1141] Name: 'BASE_TYPE', Value: 'local_resource'
    [main] [ 2010-10-16 05:16:26.421 EET ] [CRSNative.register:1141] Name: 'DESCRIPTION', Value: 'CRS resource type for the Oracle Local Resource'
    [main] [ 2010-10-16 05:16:26.427 EET ] [CRSNative.register:1141] Name: 'RESTART_ATTEMPTS', Value: '5'
    [main] [ 2010-10-16 05:16:26.434 EET ] [CRSNative.register:1141] Name: 'UPTIME_THRESHOLD', Value: '1d'
    [main] [ 2010-10-16 05:16:26.441 EET ] [CRSNative.register:1141] Name: 'AUTO_START', Value: 'restore'
    [main] [ 2010-10-16 05:16:26.517 EET ] [CRSNative.register:1141] Name: 'ENABLED', Value: '1'
    [main] [ 2010-10-16 05:16:26.531 EET ] [CRSNative.register:1141] Name: 'VERSION', Value: ''
    [main] [ 2010-10-16 05:16:26.544 EET ] [CRSNative.register:1141] Name: 'NLS_LANG', Value: ''
    [main] [ 2010-10-16 05:16:26.552 EET ] [CRSNative.register:1141] Name: 'USR_ORA_ENV', Value: ''
    [main] [ 2010-10-16 05:16:26.559 EET ] [CRSNative.register:1141] Name: 'START_DEPENDENCIES', Value: ''
    [main] [ 2010-10-16 05:16:26.595 EET ] [CRSNative.register:1141] Name: 'STOP_DEPENDENCIES', Value: ''
    [main] [ 2010-10-16 05:16:27.340 EET ] [CRSNativeResult.addLine:106] callback: ora.local_resource.type true CRS-2618: Cannot change data type INT of existing attribute ENABLED to type STRING.
    [main] [ 2010-10-16 05:16:27.357 EET ] [CRSNativeResult.addLine:106] callback: ora.local_resource.type true CRS-2618: Cannot change data type INT of existing attribute RESTART_ATTEMPTS to type STRING.
    [main] [ 2010-10-16 05:16:28.400 EET ] [CRSNativeResult.addComp:162] add comp: name ora.listener.type, rc 210, msg CRS-0210: Could not find resource 'ora.listener.type'.
    [main] [ 2010-10-16 05:16:28.419 EET ] [CRSNative.isEntityRegistered:672] entity: ora.listener.type, type: 2, registered: false
    [main] [ 2010-10-16 05:16:28.431 EET ] [CRSNative.register:1133] About to register: name: ora.listener.type, type: 2, update: false, force: false
    [main] [ 2010-10-16 05:16:28.440 EET ] [CRSNative.register:1141] Name: 'BASE_TYPE', Value: 'ora.local_resource.type'
    [main] [ 2010-10-16 05:16:28.448 EET ] [CRSNative.register:1141] Name: 'DESCRIPTION', Value: 'CRS resource type for the Listener'
    [main] [ 2010-10-16 05:16:28.457 EET ] [CRSNative.register:1141] Name: 'AGENT_FILENAME', Value: '%CRS_HOME%/bin/oraagent%CRS_EXE_SUFFIX%'
    [main] [ 2010-10-16 05:16:28.486 EET ] [CRSNative.register:1141] Name: 'ACTION_SCRIPT', Value: ''
    [main] [ 2010-10-16 05:16:28.495 EET ] [CRSNative.register:1141] Name: 'ORACLE_HOME', Value: '%CRS_HOME%'
    [main] [ 2010-10-16 05:16:28.505 EET ] [CRSNative.register:1141] Name: 'START_TIMEOUT', Value: '180'
    [main] [ 2010-10-16 05:16:28.513 EET ] [CRSNative.register:1141] Name: 'ENDPOINTS', Value: 'TCP:1521'
    [main] [ 2010-10-16 05:16:28.568 EET ] [CRSNative.register:1141] Name: 'PORT', Value: '1521'
    [main] [ 2010-10-16 05:16:28.577 EET ] [CRSNative.register:1141] Name: 'USR_ORA_OPI', Value: 'false'
    [main] [ 2010-10-16 05:16:28.713 EET ] [CRSNative.register:1141] Name: 'DEFAULT_TEMPLATE', Value: 'PROPERTY(RESOURCE_CLASS=listener) PROPERTY(LISTENER_NAME=PARSE(%NAME%, ., 2))'
    [main] [ 2010-10-16 05:16:28.890 EET ] [CRSNativeResult.addLine:106] callback: ora.listener.type true CRS-2618: Cannot change data type INT of existing attribute START_TIMEOUT to type STRING.
    [main] [ 2010-10-16 05:16:29.688 EET ] [Util.<init>:86] Util Instance created.
    [main] [ 2010-10-16 05:16:29.816 EET ] [HASContext.getCRSHome:507] /oracle/app/oracle/product/11.2.0/grid
    [main] [ 2010-10-16 05:16:29.821 EET ] [Util.getCRSHome:542] getCRSHome: ret=/oracle/app/oracle/product/11.2.0/grid
    [main] [ 2010-10-16 05:16:29.834 EET ] [ListenerImpl.getOracleHomeVal:1323] crshome is /oracle/app/oracle/product/11.2.0/grid
    [main] [ 2010-10-16 05:16:29.839 EET ] [ListenerImpl.getOracleHomeVal:1324] oraclehome is /oracle/app/oracle/product/11.2.0/grid
    [main] [ 2010-10-16 05:16:29.845 EET ] [ListenerImpl.create:534] Creating Resource
    [main] [ 2010-10-16 05:16:30.290 EET ] [CRSNativeResult.addComp:162] add comp: name ora.LISTENER.lsnr, rc 210, msg CRS-0210: Could not find resource 'ora.LISTENER.lsnr'.
    [main] [ 2010-10-16 05:16:30.302 EET ] [CRSNative.isEntityRegistered:672] entity: ora.LISTENER.lsnr, type: 1, registered: false
    [main] [ 2010-10-16 05:16:30.313 EET ] [CRSNative.register:1133] About to register: name: ora.LISTENER.lsnr, type: 1, update: false, force: false
    [main] [ 2010-10-16 05:16:30.321 EET ] [CRSNative.register:1141] Name: 'TYPE', Value: 'ora.listener.type'
    [main] [ 2010-10-16 05:16:30.331 EET ] [CRSNative.register:1141] Name: 'DESCRIPTION', Value: 'CRS resource type for the Listener'
    [main] [ 2010-10-16 05:16:30.338 EET ] [CRSNative.register:1141] Name: 'AGENT_FILENAME', Value: '%CRS_HOME%/bin/oraagent%CRS_EXE_SUFFIX%'
    [main] [ 2010-10-16 05:16:30.345 EET ] [CRSNative.register:1141] Name: 'ACTION_SCRIPT', Value: ''
    [main] [ 2010-10-16 05:16:30.353 EET ] [CRSNative.register:1141] Name: 'ORACLE_HOME', Value: '%CRS_HOME%'
    [main] [ 2010-10-16 05:16:30.360 EET ] [CRSNative.register:1141] Name: 'START_TIMEOUT', Value: '180'
    [main] [ 2010-10-16 05:16:30.466 EET ] [CRSNative.register:1141] Name: 'ENDPOINTS', Value: 'TCP:1521'
    [main] [ 2010-10-16 05:16:30.484 EET ] [CRSNative.register:1141] Name: 'PORT', Value: '1521'
    [main] [ 2010-10-16 05:16:30.516 EET ] [CRSNative.register:1141] Name: 'USR_ORA_OPI', Value: 'false'
    [main] [ 2010-10-16 05:16:30.526 EET ] [CRSNative.register:1141] Name: 'DEFAULT_TEMPLATE', Value: 'PROPERTY(RESOURCE_CLASS=listener) PROPERTY(LISTENER_NAME=PARSE(%NAME%, ., 2))'
    [main] [ 2010-10-16 05:16:30.538 EET ] [CRSNative.register:1141] Name: 'VERSION', Value: '11.2.0.1.0'
    [main] [ 2010-10-16 05:16:31.184 EET ] [ConfigureListener.isPortFree:1010] Checking if port 1521 is free on local machine...
    [main] [ 2010-10-16 05:16:31.195 EET ] [ConfigureListener.isPortFree:1023] InetAddress.getByName(127.0.0.1): /127.0.0.1
    [main] [ 2010-10-16 05:16:31.219 EET ] [ConfigureListener.isPortFree:1025] Local host IP address: primary.localdomain/192.168.1.80
    [main] [ 2010-10-16 05:16:31.223 EET ] [ConfigureListener.isPortFree:1027] Local host name: primary.localdomain
    [main] [ 2010-10-16 05:16:31.229 EET ] [ConfigureListener.isPortFree:1039] Creating ServerSocket on Port:1521, IP Address: primary.localdomain/192.168.1.80
    [main] [ 2010-10-16 05:16:31.243 EET ] [ConfigureListener.isPortFree:1075] java.net.PlainSocketImpl.socketBind(Native Method)
    java.net.PlainSocketImpl.bind(PlainSocketImpl.java:359)
    java.net.ServerSocket.bind(ServerSocket.java:319)
    java.net.ServerSocket.<init>(ServerSocket.java:185)
    oracle.net.ca.ConfigureListener.isPortFree(ConfigureListener.java:1041)
    oracle.net.ca.ConfigureListener.startOrStopListener(ConfigureListener.java:1118)
    oracle.net.ca.ConfigureListener.typicalConfigure(ConfigureListener.java:256)
    oracle.net.ca.SilentConfigure.performSilentConfigure(SilentConfigure.java:185)
    oracle.net.ca.InitialSetup.<init>(NetCA.java:4159)
    oracle.net.ca.NetCA.main(NetCA.java:405)
    *[main] [ 2010-10-16 05:16:31.249 EET ] [ConfigureListener.isPortFree:1088] Returning is Port 1521 free: false*
    my firewall is offline so what prevents oracle from using that port i tried also to use another port but i am getting the same error.
    Please advise.
    Mohamed

    Hi Mohammed,
    [main] [ 2010-10-16 05:16:31.249 EET ] [ConfigureListener.isPortFree:1088] Returning is Port 1521 free: falseMake sure that no listener service is running on port 1521.
    Its returning value false while checking free port for 1521.
    Regards,
    X A H E E R

  • Installing Flash Player fails due to 'close Safari' erro

    Hi,
    I have just downloaded the latest Flash Player onto my mac, but whenever I try to install it, the program comes up with the message 'Safari must be closed' to continue. I have closed all the Safari browsers but after clicking retry I am prompted with the same error. I then tried re-doing the entire process with all Safari browsers closed, but I am again prompted with the same error.
    Is there a way to get past this?
    Any assitance would be really appreciated,
    Thankyou
    Kimberley

    How to perform a "clean install" of Flash Player in Mac OS X
    Use Flash Player 13 (Mac OS X) though.

  • Problem installing SCCM client in remote untrusted forest

    Hi,
    My configuration is :
    My network is in two parts : intranet and a DMZ. In the DMZ there is another forest and domain. There is no trust between the forest in the DMZ and the internal network. I configured the remote forest in SCCM with a user account that has Domain Admin acces
    in the DMZ forest/domain.
    The primary site server is located in the internal part of my network. SQL is installed on a remote server. Management point, distribution point, Fallback Status Point roles are installed on the primary site server. SMS Provider is installed on the primary
    site server.
    In the DMZ part, I have a management point, distribution point installed on one server.
    The forest discovery works fine. I can query AD in the remote forest (DMZ).
    I have a problem installing the SCCM client on computers located in the remote forest with client push or with the command line.
    CCMSETUP.EXE /MP:DMZ site server /DP:DMZ site server /FSP: primary site server SMSSITECODE:SIT
    In CCMSetup.log I can see that the client try to communicate with my DMZ site server but it reverts to the management point and distribution point located in the internal part of the network. The installation fails and will try in 10 minutes.
    Do anyone has seen this problem before? Am I missing something? Could it be a configuration issue?
    Could you help me whit this please?
    Thanks in advance for your time!
    Jacques

    Does the client installation work when you install the client manually on the untrusted domain client? What does the CCM.log say on the site server?
    Have you double checked the firewall ports for the client push installation? The ports needed for the client push to work are as follows (from the site server to the client):
    SMB - TCP 445
    RPC Endpoint Mapper - TCP 135 / UDP 135
    RPC Dynamic Ports
    And to Management Point:
    HTTP - TCP 80 (When using HTTP)
    HTTPS - TCP 443 (When using HTTPS)
    Also a quote from
    TechNet: "In addition to the ports listed in the following table, client push installation also uses Internet Control Message Protocol (ICMP) echo request messages from the site server to the client computer to confirm whether the client
    computer is available on the network. ICMP is sometimes referred to as TCP/IP ping commands. ICMP does not have a UDP or TCP protocol number, and so it is not listed in the following table. However, any intervening network devices, such as firewalls, must
    permit ICMP traffic for client push installation to succeed."

  • About novell client install

    Hi All
    my customer have some branch office in Eu & US, there are some OES File Server, he want to perform data migration to windows server (OES and Windows File Server on the same branch office), but Default NSM Engine Server on Aisa. I want to ask if I install Novell client on windows File Server...the migration-Data traffic only keep on branch office local LAN or still return to Engine Server through WAN(VPN) ?
    thanks!!
    wyld

    On 12/4/2013 2:16 AM, wyldkao wrote:
    >
    > HI
    > I re-read admin guide...the novell client indeed install on Engine
    > Server, but I find it said
    > ==>"If Agents are deployed as a part of a Novell Storage Manager
    > installation, these agents are individually used for migration if the
    > Novell Client is installed on them. In order for an agent to participate
    > in a migration, the server that has the agent installed must also have
    > the Novell Client installed."
    >
    > If my Engine / Agnet locate in different location (leased line), I
    > should install Novell client on Windows File Server let it receive
    > command from Engine and direct copy data from OES Server , right ?
    >
    > wyld
    >
    >
    Yes, it would be best to install the Novell Client and an Agent on that
    server.
    -- NFMS Support Team

  • Automatically login zenworks without Novell client.

    I want to setup a computer that will automatically login to windows and to
    the ZENWorks agent (even if just to workstation) and then run the NAL as the
    windows shell. Also, we did not want to have the Novell client installed on
    the machine.
    I have figured out how to get the shell to work, but I can't seem to get the
    Zen agent to automatically logon to the workstation. I attempted to use the
    steps in TID10094960, but the zenworks agent login still comes up. I haven't
    yet put the windows credentials into the registry so that it can
    automatically login, do I need to do that at the same time?
    We're trying to make a machine that will only allow the programs to run that
    are presented by the NAL window and for the computer to login automatically
    to the point where the icons are displayed.
    Any help would be appreciated.
    Thanks..
    Brian W.

    so let me see if I got this right...
    If I want to get applications I need to authenticate a user. So, if the
    following are set then it should work.
    1. Do not install Novell client.
    2. Create a user in NDS that I can create a local user account for. Then I
    set the workstation for automatic login to windows using the a local account
    with the credentials for the NDS user.
    3. Set the Zenworks agent for PASSIVE login (this is the default?) Can this
    be changed somewhere if I already installed it, I read lower in the document
    you posted that you need to uncheck a box in the installation, can I change
    this option after the fact if I installed it wrong?
    4. Setup NAL as the shell.
    This will allow the any user of the workstation to use only the available
    icons and will allow me as an administrator to distribute them using the
    NAL.
    Thanks for your help
    BW
    "Jared Jennings" <[email protected]> wrote in message
    news:pan.2006.04.29.00.13.16.590037@SPAMmyrealbox. com...
    > Brian W,
    >
    > Well, as long as the workstation is imported, it doesn't matter what user
    > is authenticated at the worktation. The application objects should be
    > displayed.
    >
    > Try setting the Zenworks agent authenticate to passive.
    > Take a look at this piece of the docs.
    > http://www.novell.com/documentation/...l.html#agt1hcc
    >
    > --
    > Jared Jennings
    > Data Technique, Inc.
    > Novell Support Forums Sysop
    > http://wiki.novell.com
    >

  • Wireless Security and Novell Client

    To all,
    I am currently looking to upgrade our existing Network Infrastructure toa secure 802.11b network and we have purchase Cisco Secure ACS. We plan to use LEAD with our system and require a radius sign-on using our Novell Client. The problem I have is planning this and how I can setup the workstations. We use ZEN Works for our management of workstations and this means that the Novell client must be the primary sign-on. How can I get the Novell client to be the primary sign-on and still use LEAP? The Novell client requires a network connection before it can bring up a login screen. Any thoughts or tips would be greatly appreciated. Have a great day!
    Adam Osterholt
    Network Manager
    The Children's Medical Center
    Dayton, OH

    We have the same configuration here at my place of work (Novell, ACS, ZEN,etc). In my testing it depended on the OS that the client was using. On the win95/98 clients I had to set the primary login to the Novell client but save the LEAP user name and password in the wireless profile within the ACU on the client. During the client boot up, the LEAP username logs in automatically and the Novell login screen appears for login. I could not get it to work properly with prompting the user to enter their LEAP username/password. This process only work as login as my ACS server database was local to the ACS server. If the ACS server is set to use an NT domain as its user DB the LEAP auto-login did not work....
    I did not have this problem with win2000 or winXP clients.
    Hope this helps.
    Rob

  • Novell Client help

    I just finished setting up my tree in edirectory and Imanager. I installed Novell Client and when I went to login it said the tree couldn't be found.
    It is frustrating because I don't know what's wrong.

    The Novell Client installation after eDirectory may have broken eDirectory
    if it's all on windows. eDirectory uses a new version of NICI, and the
    Novell Client may still ship with an older one. Also, the Novell Client
    typically installs NICI in client mode (of course) where eDirectory
    requires it to be in server mode, and while the client can live in server
    mode, the server cannot run in client mode.
    I won't bore you, again, with my comments on platform choice. You're in
    for a ride as you can see.
    Hopefully you're in a VM and can revert a snapshot. Otherwise you may
    want to call support to see if they can help fix this. There may be a TID
    by now on this, but I haven't seen one lately. You may be able to
    reinstall eDirectory, but on windows the eDir install both installs the
    binaries that run the service as well as configure a tree, so you may need
    to recreate the tree for this to work.
    Good luck.
    If you find this post helpful and are logged into the web interface,
    show your appreciation and click on the star below...

  • ZENworks Agent + Novell client on domain joined pc

    Hi,
    We are in progress of migrate a MS domain to E-directory domain.
    There are a new bunch of new pc's which will have our base image (with Novell Client SP3 IR9 & ZENworks 11.3.1) installed which are in a workgroup.
    There existing pc's will be manually updated with Novell Client en ZENworks client.
    My tought's were to unjoin the pc's in the domain and then install Novell Client en ZENworks client.
    What are your toughts?
    Thanks in advance,
    Joeri

    First comment. I have to say that in all my years on here this is the first
    time I have seen ANYONE moving back to eDirectory as opposed to being forced
    off their beloved eDirectory. Welcome back! LOL.
    None of my 8500 systems are in a domain although we do have one for various
    services including Exchange. We use IDM to keep users and passwords synced.
    Presuming the users account already exists and its not a volatile user you
    should be fine. I am presuming in ZCM you are setting up a DLU policy that
    will control and manage the local user. As long as the local user exists the
    DLU won't try to create a new one and you won't get prompted by ZCM"
    box.with a "whats your credentials". Personally we have had no luck pre
    installing the agent and then sealing the image. There are a lot of
    documented steps you have to go through to clean it up. If you don't you are
    going to have all kinds of issues in ZCM. We just found it easier to run it
    after the fact. Tech is going to be their anyway setting it up so why not
    let them finish it is where we went. So in conclusion install your client,
    install the agent. Reboot. Login local first time. your WS won't have the
    DLU policy yet and you will need it for the normal login process to work
    smoothly. Do a ZAC CC ref if you want the policy quickly. After that user
    logs into Novell, credentials pass through, ZCM agent see local user exists
    and password is the same and voil*. User has their desktop. good luck.
    "jfeyen" wrote in message news:[email protected]...
    Hi,
    We are in progress of migrate a MS domain to E-directory domain.
    There are a new bunch of new pc's which will have our base image (with
    Novell Client SP3 IR9 & ZENworks 11.3.1) installed which are in a
    workgroup.
    There existing pc's will be manually updated with Novell Client en
    ZENworks client.
    My tought's were to unjoin the pc's in the domain and then install
    Novell Client en ZENworks client.
    What are your toughts?
    Thanks in advance,
    Joeri
    jfeyen
    jfeyen's Profile: https://forums.novell.com/member.php?userid=91976
    View this thread: https://forums.novell.com/showthread.php?t=479827

  • Novell Client 2 upgrade fails to install NICI (error 1603)

    I have configured the automatic update agent to specifically use Administrator Privileges according to the documentation: http://www.novell.com/documentation/...ient_admin.pdf
    When I run the update from "Novell Services" in system tray as a normal user the update completes with errors: fails to install NICI (error 1603).
    When I do the exact same thing as an admin, everything works fine.
    I'm am trying to update Novell Client 2 SP 1 (IR7) to Novell Client 2 SP 2 (IR2) on all of our workstations.
    And I am seeing the exact same error when trying to upgrade:
    Novell Client 2 SP 1 (IR7) to Novell Client 2 SP 2
    Novell Client 2 SP 1 (IR7) to Novell Client 2 SP 2 (IR1)
    What is going on here, is the update agent broken or am I doing something wrong?
    I don't want all of my users getting errors when their Novell Client gets updated.

    Originally Posted by jimbjorklund
    I think I'm getting closer to the actual issue, after enabling Novell Client Debugging by setting this registry value:
    [HKEY_LOCAL_MACHINE\SOFTWARE\Novell\Authentication\ NCCredProvider]
    "Debug"=dword:00000003
    This error is found in "C:\ProgramData\Novell\Client\Log\NICIInst64.l og": Error 2103.Could not resolve path for shell folder 26
    I think this has something to do with the MSI-setup (NICI_wx64.msi) not being able to find certain keys in the registry for some reason
    Recently we had problem with an MSI-based Java-installation running with admin-privileges where it would fail if "Folder Redirection" was enabled. We had set My Documents to point to H:\ which was mapped via Novell as the home folder.
    the registry settings for that are found under: [HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Explorer\User Shell Folders]. This however is NOT the problem here so the root cause for the error is still unclear to me.
    Indeed, but remember we are troubleshooting the client here- it may be possible that there was some corruption in the first failed update. So thus removing any components and with a clean install of the Novell client, to try the update process again to ascertain were exactly the process may have failed by examining any logs and/or dumps.
    Leroy Joseph
    Visual Click Software
    eDirectory Management and Reporting | DSRAZOR for eDirectory

  • I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

    I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
    I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
    I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
    Windows xp sp3
    ESM 3.5.154
    Thanks,
    Andy

    If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
    Try running the install program for the ZSC with the following command line:
    setup.exe /V"STUNINSTALL=1"
    If you've specified an uninstall password, try this one instead:
    setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
    Let me know if that helped you.
    Daniel
    >>>
    From: Andy_DeWees<[email protected] du>
    To:novell.support.zenworks.endpoint-security-management
    Date: 2/5/2009 12:52 PM
    Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
    I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
    I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
    I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
    Windows xp sp3
    ESM 3.5.154
    Thanks,
    Andy

  • Install of the CRM for Outlook 2013 client fails

    Hi,
    I don't know if I'm in the right place to post, but here I am :
    Some people in my organization have got an Office 365 license as well as a
    Microsoft Dynamics CRM Online account. I want to install the client CRM For Outlook in order to allow them to manage the CRM from their Outlook client.
    So I've downloaded the soft Microsoft Online Services Sign-In Assistant for IT Professionals RTW (as it's specified I should install it first), and downloaded the
    CRM for Outlook 2013 client.
    The steps followed
    Test was made on a Dell laptop with Win 7 x64 Pro. :
    Closed Outlook
    Installed the first one (MS Online Services ... -IT Pro)
    Tried to install the CRM with domain admin privileges. It failed
    with the following warnings in the log file :
    15:35:51|Warning| Failed to register notify interface. Error : 0x800704dd.
    15:37:10|Warning| Failed to add the file C:\Users\ADMINI~1\AppData\Local\Temp\MSCRM_{B7297F92-E151-4897-870D-CDDF179FC6CE}\SSCERuntime_x64-1036.exe to the created job. Error : 0x800704dd.
    15:37:12|Warning| Installation package C:\Users\Administrateur\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\187CZTA8\SSCERuntime_x64-FRA[1].exe failed validation check(s).
    15:37:12|  Error| Installation of Microsoft Dynamics CRM for Outlook failed.
    But it works on other environment
    On the other hand, I've tested it on my computer (Win 7 x64 as well) and it succeeded. For both computers, I use Outlook 2010, and every system hadn't any trace of CRM for Outlook before.
    Note : I only wrote the
    Warning events, not the information tagged events. I searched for this problem across the Web; unfortunatly nobody seems to have reported this specific issue.
    Note 2 : If you need any complementary information, I'll be glad to provide it.
    So I am asking, where can be the matter ? Thanks in advance for any help !

    Hi,
    Try to perform a clean boot then install the CRM 2013 for Microsoft Office Outlook.
    To perform a clean boot:
    Log on to the computer by using an account that has administrator rights.
    Click Start, type msconfig.exe in the Start Search box, and then press Enter to start the System Configuration utility.
    Note If you are prompted for an administrator password or for confirmation, you should type the password or provide confirmation.
    Collapse this imageExpand this image
    On the General tab, click the Selective startup
    option, and then click to clear the Load startup items check box.  (The
    Use Original Boot.ini check box is unavailable.)
    Collapse this imageExpand this image
    On the Services tab, click to select the Hide all Microsoft services check box, and then click
    Disable all.
    Collapse this imageExpand this image
    Note This step lets Microsoft services continue to run. These services include Networking, Plug and Play, Event Logging, Error Reporting, and other services. If you disable these services, you may permanently delete all restore points. Do not
    do this if you want to use the System Restore utility together with existing restore points.
    Click OK, and then click Restart.
    This way we can eliminate the affect by background programs, install the software to see if the error still occurs.
    If the issue persists in clean boot, please collect the Setup log files from this path:
    SystemDrive:\Users\<User>\AppData\Local\Microsoft\MSCRM\Logs
    Send the logs to our email address for further analysis:
    [email protected]
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • ConfigMgr 2012 R2 Client Failes to Install on HP EliteBook laptops with Synaptics Touchpad drivers

    I've come across a fairly frustrating issue that has been taking up way too much of my time that past week or so. The issue started a little after some of our larger sites were migrated from SCCM 2007 to SCCM 2012. I started getting complaints that one of
    our technical workstations (HP 8770w) was not deploying properly. I started investigating the issue and the problem involved the removal of the old ConfigMgr 2007 client and install of the new SCCM 2012 R2 client.
    The Windows 7 x64 OS WIM that I am using is one that was migrated from the 07 to 2012 environment and it has been working fine. During the Setup Windows and ConfigMgr step the old client is removed and the new one for the 2012 environment installs. There
    has not been any issues with this, but I feel something has changed now that we are deploying the 2012 R2 client.
    Back to the issue, what happens is that the ConfigMgr client fails to uninstall the old client. Looking in the client.msi_uninstall file you will see that it is unable to locate a couple of SCCM 2007 configmgr client patches that were installed so it can
    uninstall it. I get the "Couldn't find local patch ''. Looking for it at its source." line in the uninstall file. When I look for that under HKEY_CLASSES_ROOT\Installer\Patches the ENTIRE directory structure is empty. There is not a single item
    listed under patches.
    Since the only thing that happens in between the pushing down of the WIM and installing the configmgr client is the drivers that is where I started to look. I started over with the basics (disk and network driver) and it was able to complete the OSD process
    (like the other 30+ models we currently support). I added drivers one by one having the system re-image each time. When I got to the Synaptics TouchPad drivers the issue would return. I've tried around 5 different drivers offered from the vendor and they
    all result in the same behavior.
    I'm still actively troubleshooting how to FIX this issue, but I have no idea why this is going on. I thought I would share with the community on this issue and see if anyone else has observed this VERY odd behavior.
    Here is a snippet from the client.msi_uninstall log:
    === Verbose logging started: 1/15/2014  22:59:34  Build type: SHIP UNICODE 5.00.7601.00  Calling process: D:\_SMSTaskSequence\OSD\GAS000EF\ccmsetup.exe ===
    MSI (c) (6C:BC) [22:59:34:264]: Resetting cached policy values
    MSI (c) (6C:BC) [22:59:34:264]: Machine policy value 'Debug' is 0
    MSI (c) (6C:BC) [22:59:34:264]: ******* RunEngine:
               ******* Product: {2609EDF1-34C4-4B03-B634-55F3B3BC4931}
               ******* Action:
               ******* CommandLine: **********
    MSI (c) (6C:BC) [22:59:34:264]: Client-side and UI is none or basic: Running entire install on the server.
    MSI (c) (6C:BC) [22:59:34:264]: Grabbed execution mutex.
    MSI (c) (6C:BC) [22:59:34:264]: Cloaking enabled.
    MSI (c) (6C:BC) [22:59:34:264]: Attempting to enable all disabled privileges before calling Install on Server
    MSI (c) (6C:BC) [22:59:34:264]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (00:80) [22:59:34:264]: Running installation inside multi-package transaction {2609EDF1-34C4-4B03-B634-55F3B3BC4931}
    MSI (s) (00:80) [22:59:34:264]: Grabbed execution mutex.
    MSI (s) (00:D4) [22:59:34:264]: Resetting cached policy values
    MSI (s) (00:D4) [22:59:34:264]: Machine policy value 'Debug' is 0
    MSI (s) (00:D4) [22:59:34:264]: ******* RunEngine:
               ******* Product: {2609EDF1-34C4-4B03-B634-55F3B3BC4931}
               ******* Action:
               ******* CommandLine: **********
    MSI (s) (00:D4) [22:59:34:264]: Machine policy value 'DisableUserInstalls' is 0
    MSI (s) (00:D4) [22:59:34:405]: SRSetRestorePoint skipped for this transaction.
    MSI (s) (00:D4) [22:59:34:405]: End dialog not enabled
    MSI (s) (00:D4) [22:59:34:405]: Original package ==> C:\Windows\Installer\b8ba.msi
    MSI (s) (00:D4) [22:59:34:405]: Package we're running from ==> C:\Windows\Installer\b8ba.msi
    MSI (s) (00:D4) [22:59:34:405]: APPCOMPAT: Uninstall Flags override found.
    MSI (s) (00:D4) [22:59:34:405]: APPCOMPAT: Uninstall VersionNT override found.
    MSI (s) (00:D4) [22:59:34:405]: APPCOMPAT: Uninstall ServicePackLevel override found.
    MSI (s) (00:D4) [22:59:34:405]: APPCOMPAT: looking for appcompat database entry with ProductCode '{2609EDF1-34C4-4B03-B634-55F3B3BC4931}'.
    MSI (s) (00:D4) [22:59:34:405]: APPCOMPAT: no matching ProductCode found in database.
    MSI (s) (00:D4) [22:59:34:420]: MSCOREE not loaded loading copy from system32
    MSI (s) (00:D4) [22:59:34:420]: Note: 1: 2262 2: MsiFileHash 3: -2147287038
    MSI (s) (00:D4) [22:59:34:420]: Couldn't find local patch ''. Looking for it at its source.
    MSI (s) (00:D4) [22:59:34:420]: Resolving Patch source.
    MSI (s) (00:D4) [22:59:34:420]: User policy value 'SearchOrder' is 'nmu'
    MSI (s) (00:D4) [22:59:34:420]: User policy value 'DisableMedia' is 0
    MSI (s) (00:D4) [22:59:34:420]: Machine policy value 'AllowLockdownMedia' is 0
    MSI (s) (00:D4) [22:59:34:420]: SOURCEMGMT: Media enabled only if package is safe.
    MSI (s) (00:D4) [22:59:34:420]: SOURCEMGMT: Looking for sourcelist for product {D478B8EE-EE0A-4004-980B-4D55533EE3C2}
    MSI (s) (00:D4) [22:59:34:420]: Note: 1: 1706 2: {D478B8EE-EE0A-4004-980B-4D55533EE3C2} 3: 
    MSI (s) (00:D4) [22:59:34:420]: SOURCEMGMT: Failed to resolve source
    MSI (s) (00:D4) [22:59:34:420]: Searching provided command line patches for patch code {D478B8EE-EE0A-4004-980B-4D55533EE3C2}
    MSI (s) (00:D4) [22:59:34:420]: Could not find source for missing patch {D478B8EE-EE0A-4004-980B-4D55533EE3C2} -- orphaning this patch
    MSI (s) (00:D4) [22:59:34:420]: Couldn't find local patch ''. Looking for it at its source.
    MSI (s) (00:D4) [22:59:34:420]: Resolving Patch source.
    MSI (s) (00:D4) [22:59:34:420]: User policy value 'SearchOrder' is 'nmu'
    MSI (s) (00:D4) [22:59:34:420]: SOURCEMGMT: Media enabled only if package is safe.
    MSI (s) (00:D4) [22:59:34:420]: SOURCEMGMT: Looking for sourcelist for product {599B62C0-F1BE-4FE8-80D9-36937D5DDBFE}
    MSI (s) (00:D4) [22:59:34:420]: Note: 1: 1706 2: {599B62C0-F1BE-4FE8-80D9-36937D5DDBFE} 3: 
    MSI (s) (00:D4) [22:59:34:420]: SOURCEMGMT: Failed to resolve source
    MSI (s) (00:D4) [22:59:34:420]: Searching provided command line patches for patch code {599B62C0-F1BE-4FE8-80D9-36937D5DDBFE}
    MSI (s) (00:D4) [22:59:34:420]: Could not find source for missing patch {599B62C0-F1BE-4FE8-80D9-36937D5DDBFE} -- orphaning this patch
    MSI (s) (00:D4) [22:59:34:420]: SequencePatches starts. Product code: {2609EDF1-34C4-4B03-B634-55F3B3BC4931}, Product version: 4.00.6487.2000, Upgrade code: {252DA259-82CA-4177-B8D0-49C78937BA3E}, Product language 1033
    MSI (s) (00:D4) [22:59:34:420]: SequencePatches returns success.
    MSI (s) (00:D4) [22:59:34:420]: Final Patch Application Order:
    MSI (s) (00:D4) [22:59:34:420]: Other Patches:
    MSI (s) (00:D4) [22:59:34:420]: Internal Exception during install operation: 0xc0000005 at 0x000007FEFDBF35E1.
    MSI (s) (00:D4) [22:59:34:420]: WER report disabled for silent install.
    MSI (s) (00:D4) [22:59:34:420]: Internal MSI error. Installer terminated prematurely.
    MSI (s) (00:D4) [22:59:34:420]: MainEngineThread is returning 1603
    MSI (s) (00:80) [22:59:34:420]: No System Restore sequence number for this installation.
    Unexpected Termination
    MSI (s) (00:80) [22:59:34:420]: User policy value 'DisableRollback' is 0
    MSI (s) (00:80) [22:59:34:420]: Machine policy value 'DisableRollback' is 0
    MSI (s) (00:80) [22:59:34:420]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (00:80) [22:59:34:420]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (00:80) [22:59:34:420]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (00:80) [22:59:34:420]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
    MSI (s) (00:80) [22:59:34:420]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
    MSI (s) (00:80) [22:59:34:420]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (s) (00:80) [22:59:34:420]: Restoring environment variables
    MSI (c) (6C:BC) [22:59:34:420]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (c) (6C:BC) [22:59:34:420]: MainEngineThread is returning 1603
    === Verbose logging stopped: 1/15/2014  22:59:34 ===

    @Narcoticoo
    I've not used the tool. This issue has also expanded since the original title as I'm getting the same behavior with the driver package that does not include the Touchpad driver anymore. I'm currently going back to just the network and storage driver to see
    if it works or not.
    However, this is the bigger issue I have:
    I have an older build called Build 5.7 internally. Using that WIM and the same driver package (original one that has the Touchpad driver included) it works without issue. Never had a problem.
    The new build is called Build 6.0 internally. This WIM and the same driver package has not been working at all.
    We support about 35 models with our current Windows 7 x64 image and I am having the same failure issue on four different HP models. They are the 8770w, ZBook 17, Z600 and Z820. The majority of the other systems are Dell devices. Just for transparency sakes,
    nothing Dell specific is in the core WIM that is captured.
    So, Build 5.7 can deploy just fine on all pieces of hardware with their old driver packages. The new Build 6.0 intalls on almost every platform fine with their old driver packages. These four HP systems are nothing but trouble though. I've opened a case
    with HP to see if they have noticed anything internally. I'm not too hopeful, but at least it is something. Maybe there is some odd conflict with a newer Windows patch or some odd dependency on older HP drivers. The new image has .NET 4.5.1, IE 10 and so forth.

Maybe you are looking for