Installing OCS 10g on RHEL 3 (Upd 4) failing kernel parameter checks

Hi all,
I am preparing for upgrading my OCS 9.0.4.2 to 10g. While running the Universal Installer it fails within the kernel parameter checks. It complains about two parameters that cannot find in /proc/sys/kernel. The two parameters are: hardnofiles and softnofiles. I don't have any idea what those could be, anyone out there who can tell me what this means?
Thanks,
Stephan
Message was edited by:
sbudach

check out /etc/security/limits.conf you should add values to the bottom of that file as shown in the install guide.
This is what I have in mine;
* soft nproc 2047
* hard nproc 16384
* soft nofile 1024
* hard nofile 65536
Cheers.
Ben

Similar Messages

  • Can't install OCS 10g Release 1 (10.1.2) on RHAS 4

    I can not install OCS 10g Release 1 (10.1.2) on RHAS 4 because kernel_version different, is there solution ?

    This is my logs :
    Checking operating system certification
    Expected result: One of redhat-2.1,redhat-3,redhat-4,SuSE-9,SuSE-8,UnitedLinux-1.0
    Actual Result: redhat-4
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking kernel parameters
    Checking for shmall=3279547; found shmall=3279547.     Passed
    Checking for msgmnb=65535; found msgmnb=65535.     Passed
    Checking for semmns=32000; found semmns=32000.     Passed
    Checking for semopm=100; found semopm=100.     Passed
    Checking for msgmni=2878; found msgmni=2878.     Passed
    Checking for shmmax=2147483648; found shmmax=2147483648.     Passed
    Checking for hardnofiles=65536; found hardnofiles=65536.     Passed
    Checking for VERSION=2.6.9-11.EL; found VERSION=2.6.9-5.EL.     Failed <<<<
    Checking for file-max=327679; found file-max=327679.     Passed
    Checking for semmsl=256; found semmsl=256.     Passed
    Checking for semmni=142; found semmni=142.     Passed
    Checking for msgmax=8192; found msgmax=8192.     Passed
    Checking for shmmni=4096; found shmmni=4096.     Passed
    Checking for softnofiles=4096; found softnofiles=65536.     Passed
    Check complete. The overall result of this check is: Failed <<<<
    Problem: The kernel parameters do not meet the minimum requirements (see above).
    Recommendation: Configuring kernel parameters is described in the "Check Software Requirements" section of the Quick Installation and Upgrade Guide and in the "Requirements" Chapter of the Installation Guide.
    =======================================================================
    Checking recommended operating system packages
    Checking for glibc-2.3.4-2.9; found glibc-2.3.4-2.     Failed <<<<
    Checking for gcc-3.4.3-22.1; found gcc-3.4.3-9.EL4.     Failed <<<<
    Checking for gcc-c++-3.4.3-22.1; found gcc-c++-3.4.3-9.EL4.     Failed <<<<
    Checking for setarch-1.6-1; found setarch-1.6-1.     Passed
    Checking for pdksh-5.2.14-30; found pdksh-5.2.14-30.     Passed
    Checking for sysstat-5.0.5-1; found sysstat-5.0.5-1.     Passed
    Checking for gnome-libs-1:1.4.1.2.90-44.1; found gnome-libs-1:1.4.1.2.90-44.1.     Passed
    Checking for libstdc++-3.4.3-22.1; found libstdc++-3.4.3-9.EL4.     Failed <<<<
    Checking for libstdc++-devel-3.4.3-22.1; found libstdc++-devel-3.4.3-9.EL4.     Failed <<<<
    Checking for compat-glibc-2.3.2-95.30; found compat-glibc-1:2.3.2-95.30.     Passed
    Checking for compat-libstdc++-33-3.2.3-47.3; found compat-libstdc++-33-3.2.3-47.3.     Passed
    Checking for glibc-common-2.3.4-2.9; found glibc-common-2.3.4-2.     Failed <<<<
    Checking for binutils-2.15.92.0.2-13; found binutils-2.15.92.0.2-10.EL4.     Failed <<<<
    Checking for make-1:3.80-5; found make-1:3.80-5.     Passed
    Checking for compat-db-4.1.25-9; found compat-db-4.1.25-9.     Passed
    Checking for compat-libstdc++-296-2.96-132.7.2; found compat-libstdc++-296-2.96-132.7.2.     Passed
    Check complete. The overall result of this check is: Failed <<<<
    Problem: Some recommended packages are missing (see above).
    Recommendation: You may actually have installed packages which have obsoleted these, in which case you can successfully continue with the install. If you have not, it is recommended that you do not continue. Refer to the readme to find out how to get the missing packages.
    =======================================================================
    Validating ORACLE_BASE location (if set)
    Check complete. The overall result of this check is: Passed
    =======================================================================

  • Install OCS 10.1.2 Infra DB failed with LDAP: error code 16 on Workspaces

    during install OCS Infrastructure DB OCS have error:
    ... processed key-value: logfile=/oracle/product/dbocs/workspaces/logs/cw_config_backend.log
    ... processed key-value: action=setup_backend
    ... processed key-value: oh=/oracle/product/dbocs
    ... processed key-value: oid=oid.domain
    ... processed key-value: oid_port=389
    ... processed key-value: oid_user_dn=cn=orcladmin
    ... processed key-value: oid_passwd=xxxxxx
    ... processed key-value: db_sn=ocs.domain
    ... processed key-value: dba_user=sys
    ... processed key-value: dba_passwd=xxxxxx
    ... processed key-value: cw_db_passwd=xxxxxx
    Attempting to set logfile to: /oracle/product/dbocs/workspaces/logs/cw_config_backend.log
    Processed oh=/oracle/product/dbocs
    BACKEND installation ...
    ... Trying to lookup database dn
    ... Obtain OID connection
    ...... Can not obtain OID ssl port.
    ...... OID port = "389"
    ...... Trying to establish a non-ssl connection. OID host "oid.domain", OID port "389", OID user dn "cn=orcladmin".
    ... OID connection created.
    ...... You must specify either db_dn or db_sn.
    ...... ldap search filter "(&(objectclass=orcldbserver)(orcldbglobalname=ocs.domain))"
    ...... Succesfully located database dn "cn=ocs,cn=OracleContext".
    ...... Database dn = "cn=ocs,cn=OracleContext"
    ... Validating existence and version of CW schema: "CWSYS" in database: "cn=ocs,cn=OracleContext".
    ... Obtain JDBC connect string
    ... JDBC connect string = "(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ocsoas.domain)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ocs.domain)))"
    ...derived: "jdbc_str=(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ocsoas.domain)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ocs.domain)))".
    Opening JDBC connection: "jdbc:oracle:thin:sys/xxxxxx@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ocsoas.domain)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ocs.domain)))"
    Opening JDBC connection: "jdbc:oracle:thin:sys/xxxxxx@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ocsoas.domain)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ocs.domain)))"
    Unlocking schema and setting passwd: "CWSYS/xxxxxx".
    Opening JDBC connection: "jdbc:oracle:thin:sys/xxxxxx@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ocsoas.domain)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ocs.domain)))"
    ... Checking Workspaces container.
    ... Container "cn=CollaborativeWorkspaces,cn=Products,cn=OracleContext" already exist.
    ... Finish checking Workspaces container.
    ... Trying to create backend application entity in OID
    ...... Database dn = "cn=ocs,cn=OracleContext"
    ...... Backend entity name = "ocs"
    ...... Backend entity dn = "orclApplicationCommonName=ocs,cn=Database Instances,cn=CollaborativeWorkspaces,cn=Products,cn=OracleContext"
    ... Backend entries already exist. Cleanup old entries.
    deregisterProvisioningListener ...
    app dn = orclApplicationCommonName=ocs,cn=Database Instances,cn=CollaborativeWorkspaces,cn=Products,cn=OracleContext
    subscriber = dc=domain,dc=com
    ... Trying to remove entity "orclApplicationCommonName=ocs,cn=Database Instances,cn=CollaborativeWorkspaces,cn=Products,cn=OracleContext".
    ... Deleting "orclApplicationCommonName=ocs,cn=Database Instances,cn=CollaborativeWorkspaces,cn=Products,cn=OracleContext"
    Adding Workspaces application entity to: cn=Service Registry Viewers,cn=Groups,cn=OracleContext
    Adding Workspaces application entity to: cn=Service Registry Admins,cn=Groups,cn=OracleContext
    ... Insufficient privilege to create application entity "orclApplicationCommonName=ocs,cn=Database Instances,cn=CollaborativeWorkspaces,cn=Products,cn=OracleContext". Please check the user DN and password.
    javax.naming.directory.NoSuchAttributeException: [LDAP: error code 16 - One or more values for attribute uniquemember does not exist]; remaining name 'cn=Service Registry Admins,cn=Groups,cn=OracleContext'
    at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3009)
    at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2934)
    at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2740)
    at com.sun.jndi.ldap.LdapCtx.c_modifyAttributes(LdapCtx.java:1373)
    at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_modifyAttributes(ComponentDirContext.java:235)
    at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(PartialCompositeDirContext.java:147)
    at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(PartialCompositeDirContext.java:136)
    at javax.naming.directory.InitialDirContext.modifyAttributes(InitialDirContext.java:136)
    at oracle.workspaces.share.util.oid.OIDShareUtil.setEntryAttribute(OIDShareUtil.java:471)
    at oracle.workspaces.share.util.oid.OIDShareUtil.addMemberToGroup(OIDShareUtil.java:420)
    at oracle.workspaces.share.util.oid.OIDShareUtil.addMemberToGroupIgnoreDuplicateMember(OIDShareUtil.java:435)
    at oracle.workspaces.install.CwConfigOID.createBackendEntity(CwConfigOID.java:1205)
    at oracle.workspaces.install.CwConfigOID.registerBackend(CwConfigOID.java:449)
    at oracle.workspaces.install.CwConfig.regBackend(CwConfig.java:320)
    at oracle.workspaces.install.CwConfig.run(CwConfig.java:609)
    at oracle.workspaces.install.CwConfig.main(CwConfig.java:790)
    oracle.workspaces.install.CwCAException: Error while executing action: "setup_backend"
    Caused by: javax.naming.directory.NoSuchAttributeException: [LDAP: error code 16 - One or more values for attribute uniquemember does not exist]
    at oracle.workspaces.install.CwConfig.run(CwConfig.java:639)
    at oracle.workspaces.install.CwConfig.main(CwConfig.java:790)
    Caused by: javax.naming.directory.NoSuchAttributeException: [LDAP: error code 16 - One or more values for attribute uniquemember does not exist]; remaining name 'cn=Service Registry Admins,cn=Groups,cn=OracleContext'
    at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3009)
    at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2934)
    at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2740)
    at com.sun.jndi.ldap.LdapCtx.c_modifyAttributes(LdapCtx.java:1373)
    at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_modifyAttributes(ComponentDirContext.java:235)
    at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(PartialCompositeDirContext.java:147)
    at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(PartialCompositeDirContext.java:136)
    at javax.naming.directory.InitialDirContext.modifyAttributes(InitialDirContext.java:136)
    at oracle.workspaces.share.util.oid.OIDShareUtil.setEntryAttribute(OIDShareUtil.java:471)
    at oracle.workspaces.share.util.oid.OIDShareUtil.addMemberToGroup(OIDShareUtil.java:420)
    at oracle.workspaces.share.util.oid.OIDShareUtil.addMemberToGroupIgnoreDuplicateMember(OIDShareUtil.java:435)
    at oracle.workspaces.install.CwConfigOID.createBackendEntity(CwConfigOID.java:1205)
    at oracle.workspaces.install.CwConfigOID.registerBackend(CwConfigOID.java:449)
    at oracle.workspaces.install.CwConfig.regBackend(CwConfig.java:320)
    at oracle.workspaces.install.CwConfig.run(CwConfig.java:609)
    ... 1 more
    javax.naming.directory.NoSuchAttributeException: [LDAP: error code 16 - One or more values for attribute uniquemember does not exist]; remaining name 'cn=Service Registry Admins,cn=Groups,cn=OracleContext'
    at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3009)
    at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2934)
    at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2740)
    at com.sun.jndi.ldap.LdapCtx.c_modifyAttributes(LdapCtx.java:1373)
    at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_modifyAttributes(ComponentDirContext.java:235)
    at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(PartialCompositeDirContext.java:147)
    at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(PartialCompositeDirContext.java:136)
    at javax.naming.directory.InitialDirContext.modifyAttributes(InitialDirContext.java:136)
    at oracle.workspaces.share.util.oid.OIDShareUtil.setEntryAttribute(OIDShareUtil.java:471)
    at oracle.workspaces.share.util.oid.OIDShareUtil.addMemberToGroup(OIDShareUtil.java:420)
    at oracle.workspaces.share.util.oid.OIDShareUtil.addMemberToGroupIgnoreDuplicateMember(OIDShareUtil.java:435)
    at oracle.workspaces.install.CwConfigOID.createBackendEntity(CwConfigOID.java:1205)
    at oracle.workspaces.install.CwConfigOID.registerBackend(CwConfigOID.java:449)
    at oracle.workspaces.install.CwConfig.regBackend(CwConfig.java:320)
    at oracle.workspaces.install.CwConfig.run(CwConfig.java:609)
    at oracle.workspaces.install.CwConfig.main(CwConfig.java:790)
    What should i do?
    help.
    Thanks

    closed
    Re: Install OCS 10.1.2 Infra DB failed with LDAP: error code 16 on Workspac

  • Display Problem while installing Oracle 10g on RHEL 5

    All,
    I'm in the process of installing Oracle 10g R2 on RHEL4, when i'm trying to issue ./runInstaller i'm getting the below error.
    I could get the xclock on the host, even then i'm getting below display error, could any one please help me to resolve this ?
    e@dhcppc6 database]$ ./runInstaller
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-11-18_02-21-10PM. Please wait ...[oracle@dhcppc6 database]$ Xlib: connection to ":0.0" refused by server
    Xlib: No protocol specified
    Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
    at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
    at sun.awt.X11GraphicsEnvironment.<clinit>(Unknown Source)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Unknown Source)
    at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(Unknown Source)
    at java.awt.Window.init(Unknown Source)
    at java.awt.Window.<init>(Unknown Source)
    at java.awt.Frame.<init>(Unknown Source)
    at oracle.ewt.popup.PopupFrame.<init>(Unknown Source)
    at oracle.ewt.lwAWT.BufferedFrame.<init>(Unknown Source)
    at oracle.sysman.oio.oioc.OiocOneClickInstaller.<init>(OiocOneClickInstaller.java:378)
    at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:2091)
    [oracle@dhcppc6 database]$

    export DISPLAY=<hostname>:0
    Are you running from the same terminal or connecting remotely?
    If connecting remotely, you need a Xserver running on the client machine.

  • Problem when installing oracle 10g on RHEL-4

    greetings,
    i have been trying to install oracle 10g on my linux machine for the past 10 days, everytimje i do all the steps and change the kernel parameters but when i start the runinstaller file. i get the folloeing error.
    I don't know what this error is or why is it happening
    you can find a snapshot of the error on the following link
    http://www.4shared.com/dir/4180305/6152dc22/Oracle_errors.html
    also another error is arising when i log in to the linux box with the user oracle... i have been having these errors for the past 10 days and i reached to the point where my knowledge won't help me more than ur experiences.
    a snapshot of this error also is available in the above link

    While I understand a picture is worth a thousand words, I backed off from the site as soon as it started providing active ads and spy-ware-like indications. If you want help (from me at least) please describe the symptoms.
    You could also use the following sites to help with the install:
    http://www.puschitz.com and http://ivan.kartik.sk

  • Installing Oracle 10g on RHELAS 3, 2.1, and on RH9

    You can find instructions for installing Oracle 10g on Red Hat Enterprise Linux AS 3, 2.1, and on Red Hat 9 at
    http://www.puschitz.com/InstallingOracle10g.shtml
    I will add more information as time goes on.
    Werner

    [oracle@zwzxcw bin]$ tnsping zh
    TNS Ping Utility for Linux: Version 10.1.0.2.0 - Production on 21-FEB-2004 19:50:06
    Copyright (c) 1997, 2003, Oracle. All rights reserved.
    Used parameter files:
    /opt/oracle/product/10.1.0/db_1/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 134.34.22.3)(PORT = 1521))) (CONNECT_DATA = (SID = ops2)))
    OK (0 msec)
    [oracle@zwzxcw bin]$ sqlplus zh@zh
    SQL*Plus: Release 10.1.0.2.0 - Production on Sat Feb 21 19:50:18 2004
    Copyright (c) 1982, 2004, Oracle. All rights reserved.
    Enter password:
    ERROR:
    ORA-03134: Connections to this server version are no longer supported.
    Enter user-name:
    =======================================================
    Ora10g also cannot connect earily ora8, that's mean if I want upgrade to Ora10g I must drop the earily application which having connect other earily oradb such as 8.0.5, however not every company want upgrade, so they also force us using the earily oradb,unless rebuild the application mode.

  • OUI error installing Oracle 10g on RHEL 3 (Taroon update 2)

    Hi. I trying to install Oracle 10.1.0.3 on RHEL 3 (Taroon update 2). I followed the guide http://www.puschitz.com/InstallingOracle10g.shtml. Quick install guide too.
    My server is Dell PowerEdge 2850. And i did all requirements, enviroments. RHEL 3 is fresh and updated via RHN.
    But when i run ./runInstaller occurs following error:
    [oracle@sw5 Disk1]$ ./runInstaller
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, SuSE-8 or UnitedLinux-1.0
    Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2005-09-07_04-24-13PM. Please wait ...[oracle@sw5 Disk1]$
    An unexpected exception has been detected in native code outside the VM.
    Unexpected Signal : 11 occurred at PC=0x8077640
    Function=[Unknown.]
    Library=(N/A)
    NOTE: We are unable to locate the function name symbol for the error
    just occurred. Please refer to release documentation for possible
    reason and solutions.
    Current Java thread:
    Dynamic libraries:
    0000000008048000-000000000804e000 r-xp 0000000000000000 08:03 2130475 /tmp/OraInstall2005-09-07_04-24-13PM/jre/1.4.2/bin/java
    000000000804e000-000000000804f000 rwxp 0000000000005000 08:03 2130475 /tmp/OraInstall2005-09-07_04-24-13PM/jre/1.4.2/bin/java
    000000000804f000-0000000008096000 rw-p 0000000000000000 00:00 0
    0000000040000000-0000000040015000 r-xp 0000000000000000 08:03 524291 /lib/ld-2.3.2.so
    0000000040015000-0000000040016000 rwxp 0000000000015000 08:03 524291 /lib/ld-2.3.2.so
    0000000040016000-000000004001e000 r-xp 0000000000000000 08:03 3473545 /tmp/OraInstall2005-09-07_04-24-13PM/jre/1.4.2/lib/i386/native_threads/libhpi.so
    000000004001e000-000000004001f000 rwxp 0000000000007000 08:03 3473545 /tmp/OraInstall2005-09-07_04-24-13PM/jre/1.4.2/lib/i386/native_threads/libhpi.so
    000000004001f000-0000000040023000 rwxs 0000000000000000 08:03 2687247 /tmp/hsperfdata_oracle/3269
    0000000040023000-0000000040024000 rwxp 0000000000000000 00:00 0
    0000000040024000-0000000040031000 r-xp 0000000000000000 08:03 7323655 /lib/tls/libpthread-0.60.so
    0000000040031000-0000000040032000 rwxp 000000000000c000 08:03 7323655 /lib/tls/libpthread-0.60.so
    0000000040032000-0000000040034000 rwxp 0000000000000000 00:00 0
    0000000040034000-0000000040036000 r-xp 0000000000000000 08:03 524304 /lib/libdl-2.3.2.so
    0000000040036000-0000000040037000 rwxp 0000000000001000 08:03 524304 /lib/libdl-2.3.2.so
    0000000040037000-0000000040169000 r-xp 0000000000000000 08:03 7323650 /lib/tls/libc-2.3.2.so
    0000000040169000-000000004016c000 rwxp 0000000000132000 08:03 7323650 /lib/tls/libc-2.3.2.so
    000000004016c000-0000000040170000 rwxp 0000000000000000 00:00 0
    0000000040170000-000000004056a000 r-xp 0000000000000000 08:03 8028660 /tmp/OraInstall2005-09-07_04-24-13PM/jre/1.4.2/lib/i386/client/libjvm.so
    000000004056a000-0000000040586000 rwxp 00000000003f9000 08:03 8028660 /tmp/OraInstall2005-09-07_04-24-13PM/jre/1.4.2/lib/i386/client/libjvm.so
    0000000040586000-0000000040598000 rwxp 0000000000000000 00:00 0
    0000000040598000-00000000405aa000 r-xp 0000000000000000 08:03 524308 /lib/libnsl-2.3.2.so
    00000000405aa000-00000000405ab000 rwxp 0000000000011000 08:03 524308 /lib/libnsl-2.3.2.so
    00000000405ab000-00000000405ad000 rwxp 0000000000000000 00:00 0
    00000000405ad000-00000000405ce000 r-xp 0000000000000000 08:03 7323653 /lib/tls/libm-2.3.2.so
    00000000405ce000-00000000405cf000 rwxp 0000000000021000 08:03 7323653 /lib/tls/libm-2.3.2.so
    00000000405cf000-00000000405d0000 rwxp 0000000000000000 00:00 0
    00000000405dc000-00000000405e7000 r-xp 0000000000000000 08:03 524324 /lib/libnss_files-2.3.2.so
    00000000405e7000-00000000405e8000 rwxp 000000000000a000 08:03 524324 /lib/libnss_files-2.3.2.so
    00000000405f6000-00000000405f9000 ---p 0000000000000000 00:00 0
    00000000405fd000-0000000040607000 rwxp 0000000000000000 00:00 0
    0000000040607000-0000000040617000 r-xp 0000000000000000 08:03 3473625 /tmp/OraInstall2005-09-07_04-24-13PM/jre/1.4.2/lib/i386/libverify.so
    0000000040617000-0000000040619000 rwxp 000000000000f000 08:03 3473625 /tmp/OraInstall2005-09-07_04-24-13PM/jre/1.4.2/lib/i386/libverify.so
    0000000040619000-0000000040639000 r-xp 0000000000000000 08:03 3473626 /tmp/OraInstall2005-09-07_04-24-13PM/jre/1.4.2/lib/i386/libjava.so
    0000000040639000-000000004063b000 rwxp 000000000001f000 08:03 3473626 /tmp/OraInstall2005-09-07_04-24-13PM/jre/1.4.2/lib/i386/libjava.so
    000000004063b000-000000004064f000 r-xp 0000000000000000 08:03 3473628 /tmp/OraInstall2005-09-07_04-24-13PM/jre/1.4.2/lib/i386/libzip.so
    000000004064f000-0000000040652000 rwxp 0000000000013000 08:03 3473628 /tmp/OraInstall2005-09-07_04-24-13PM/jre/1.4.2/lib/i386/libzip.so
    0000000040652000-0000000041fea000 r-xs 0000000000000000 08:03 3473873 /tmp/OraInstall2005-09-07_04-24-13PM/jre/1.4.2/lib/rt.jar
    0000000041fea000-0000000042034000 rwxp 0000000000000000 00:00 0
    0000000042034000-000000004204a000 r-xs 0000000000000000 08:03 3473650 /tmp/OraInstall2005-09-07_04-24-13PM/jre/1.4.2/lib/sunrsasign.jar
    000000004204a000-0000000042125000 r-xs 0000000000000000 08:03 3473870 /tmp/OraInstall2005-09-07_04-24-13PM/jre/1.4.2/lib/jsse.jar
    0000000042125000-0000000042136000 r-xs 0000000000000000 08:03 3473651 /tmp/OraInstall2005-09-07_04-24-13PM/jre/1.4.2/lib/jce.jar
    0000000042136000-000000004268f000 r-xs 0000000000000000 08:03 3473871 /tmp/OraInstall2005-09-07_04-24-13PM/jre/1.4.2/lib/charsets.jar
    000000004268f000-0000000042707000 rwxp 0000000000000000 00:00 0
    0000000042707000-000000004468f000 rwxp 0000000000078000 00:00 0
    000000004468f000-0000000044691000 rwxp 0000000000000000 00:00 0
    0000000044691000-000000004470f000 rwxp 0000000002002000 00:00 0
    000000004470f000-0000000044737000 rwxp 0000000000000000 00:00 0
    0000000044740000-00000000447e0000 rwxp 0000000000000000 00:00 0
    00000000447e0000-00000000452c0000 rwxp 00000000000a9000 00:00 0
    00000000452c0000-0000000045420000 rwxp 0000000000000000 00:00 0
    0000000045420000-000000004dd40000 rwxp 0000000000ce9000 00:00 0
    000000004dd40000-000000004e140000 rwxp 0000000000000000 00:00 0
    000000004e140000-0000000051d40000 rwxp 0000000009a09000 00:00 0
    0000000051d40000-0000000051d41000 rwxp 0000000000000000 00:00 0
    0000000051d41000-0000000051d45000 rwxp 000000000d60a000 00:00 0
    0000000051d45000-0000000051d47000 rwxp 0000000000000000 00:00 0
    0000000051d47000-0000000051d8b000 rwxp 000000000d610000 00:00 0
    0000000051d8b000-0000000051d8d000 rwxp 0000000000000000 00:00 0
    0000000051d8d000-0000000051dab000 rwxp 000000000d656000 00:00 0
    0000000051dab000-0000000051dad000 rwxp 0000000000000000 00:00 0
    0000000051dad000-0000000051df2000 rwxp 0000000000001000 00:00 0
    0000000051df2000-0000000051df5000 rwxp 0000000000000000 00:00 0
    0000000051df5000-0000000051e13000 rwxp 0000000000049000 00:00 0
    0000000051e13000-0000000051e14000 ---p 0000000000000000 00:00 0
    0000000051e14000-0000000051e94000 rwxp 0000000000001000 00:00 0
    00000000fff71000-00000000ffffe000 rw-p fffffffffff74000 00:00 0
    Heap at VM Abort:
    Heap
    def new generation total 576K, used 0K [0x44740000, 0x447e0000, 0x452c0000)
    eden space 512K, 0% used [0x44740000, 0x44740048, 0x447c0000)
    from space 64K, 0% used [0x447c0000, 0x447c0000, 0x447d0000)
    to space 64K, 0% used [0x447d0000, 0x447d0000, 0x447e0000)
    tenured generation total 1408K, used 0K [0x452c0000, 0x45420000, 0x4dd40000)
    the space 1408K, 0% used [0x452c0000, 0x452c0000, 0x452c0200, 0x45420000)
    compacting perm gen total 4096K, used 277K [0x4dd40000, 0x4e140000, 0x51d40000)
    the space 4096K, 6% used [0x4dd40000, 0x4dd85490, 0x4dd85600, 0x4e140000)
    Local Time = Wed Sep 7 16:24:17 2005
    Elapsed Time = 0
    # The exception above was detected in native code outside the VM
    # Java VM: Java HotSpot(TM) Client VM (1.4.2_02-b03 mixed mode)
    # An error report file has been saved as hs_err_pid3269.log.
    # Please refer to the file for further information.
    What i did wrong? Please help me.

    Try to set the LD_ASSUME_KERNEL
    export LD_ASSUME_KERNEL=2.4.19
    cu
    Andreas

  • Install of 10g on XP Pro SP3 fails at 2%

    During installation of Oracle Database 10g Release 10.2.0.1.0 from CD OR from the downloaded software, the process stalls at 2% during the "Installation" phase. I have tried the disk on 3 PC's, and the downloaded version on 1 of them.
    Note
    - I have installed the loopback adapter as all my PC's are DCHP enabled
    - I have upgraded Java to version 6.18
    - I have copied the files from the disk to the hard drive and tried to install from the hard drive, same result
    - All three PC's have at least 1GB of RAM and tons of hard disk space
    - I have downloaded 10201_database_win32 from the Oracle Website, and have the exact same issue when installing
    What information can I provide to this community that might enable your assistance?
    Thanks.

    The log file was enourmous, but luckily enough I have solved the issue.
    Even though I had installed the loopback adapter (becuase my PC uses DHCP) I had to disable all of the other network connections including my wireless connection leaving only the loopback adapter enabled.

  • SSO Configuration Assistant failed during installation of OCS 10G on linux

    I am trying to install OCS 10g infrastructure on CentOS 4.2
    the linux version which the installer displays is redhat-4
    The installation works fine but the SSO CA fails and gives this message
    NLS_LANG param = AMERICAN_AMERICA.AL32UTF8ERROR : Exception while configing SSO DAD :oracle.ons.SubscriptionException: Subscription request timed out after 120000 millseconds. Possible causes: OPMN may not be running, you may have an OPMN running in an alternate ORACLE_HOME using duplicate port values, or OPMN may be misconfigured.
         at oracle.ons.SubscriptionNotification.waitForReply(SubscriptionNotification.java:82)
         at oracle.ons.ONS.addSubscriber(ONS.java:336)
         at oracle.ons.Subscriber.realStartup(Subscriber.java:92)
         at oracle.ons.Subscriber.<init>(Subscriber.java:80)
         at oracle.ons.ONS.createNewSubscriber(ONS.java:690)
         at oracle.ias.sysmgmt.task.TaskMaster.sysInit(Unknown Source)
         at oracle.ias.sysmgmt.task.TaskMaster.sysInit(Unknown Source)
         at oracle.ias.sysmgmt.task.InstanceManager.sysInit(Unknown Source)
         at oracle.ias.sysmgmt.task.InstanceManager.init(Unknown Source)
         at oracle.ias.sysmgmt.EntryPoint.init(Unknown Source)
         at oracle.webdb.config.smi.GeneralConfig.<init>(Unknown Source)
         at oracle.webdb.config.smi.GeneralDADConfig.<init>(Unknown Source)
         at oracle.webdb.config.smi.DADConfig904Imp.<init>(Unknown Source)
         at oracle.webdb.config.smi.ConfigFactory.getGeneralDADConfig(Unknown Source)
         at oracle.webdb.config.smi.ConfigFactory.getDADConfig904(Unknown Source)
         at oracle.webdb.config.smi.ConfigFactory.getDADConfigLatest(Unknown Source)
         at oracle.webdb.config.smi.ConfigFactory.getDADConfigLatest(Unknown Source)
         at oracle.security.sso.SSOConfigAssistant.configDAD(SSOConfigAssistant.java:1493)
         at oracle.security.sso.SSOConfigAssistant.ssoConfig(SSOConfigAssistant.java:1270)
         at oracle.security.sso.SSOConfigAssistant.main(SSOConfigAssistant.java:217)
    Please fix the error reported in the stack trace above and re-run SSO Config Tool.
    /home/oracle/product/10.1.2/ocs_1/jdk/bin/java
    -cp
    /home/oracle/product/10.1.2/ocs_1/lib/xmlparserv2.jar:/home/oracle/product/10.1.2/ocs_1/sysman/webapps/emd/WEB-INF/lib/emd.jar:/home/oracle/product/10.1.2/ocs_1/sysman/webapps/emd/WEB-INF/lib/log4j-core.jar:/home/oracle/product/10.1.2/ocs_1/lib/emSDK.jar
    -DORACLE_HOME=/home/oracle/product/10.1.2/ocs_1
    oracle.sysman.emSDK.conf.TargetInstaller
    deletetarget
    oracle_sso_server
    infra_inst.nufastserver.local.nu_Single Sign-On:orassogetASTargetInfo: oracleHome = "/home/oracle/product/10.1.2/ocs_1".
    getASTargetInfo: iasName = "infra_inst.nufastserver.local.nu".
    getASTargetInfo: iAS Target Type = "oracle_ias".
    Setting the AS product version value in targets.xml to be "10.1.2.0.2".
    Calling method getASTargetInfo.getASTargetInfo: StatusURL value = "http://nufastserver.local.nu:7777".
    Retrieved SSO protocol, host, and port info from targets.xml.
    The values are: "http://nufastserver.local.nu:7777".The following values will be used to configure the sso_server target entry in targets.xml.
    Protocol: "http".
    Hostname: "nufastserver.local.nu".
    Port: "7777"./home/oracle/product/10.1.2/ocs_1/jdk/bin/java
    -cp
    /home/oracle/product/10.1.2/ocs_1/lib/xmlparserv2.jar:/home/oracle/product/10.1.2/ocs_1/sysman/webapps/emd/WEB-INF/lib/emd.jar:/home/oracle/product/10.1.2/ocs_1/sysman/webapps/emd/WEB-INF/lib/log4j-core.jar:/home/oracle/product/10.1.2/ocs_1/lib/emSDK.jar
    -DORACLE_HOME=/home/oracle/product/10.1.2/ocs_1
    oracle.sysman.emSDK.conf.TargetInstaller
    addtarget
    /home/oracle/product/10.1.2/ocs_1/sso/sso_server_target2add.xmlConfiguring SSO languages with the following language code:
    us Language us is already installed.
    About to execute java call using emConfigInstall.jar.
    Here are the arguments:
    /home/oracle/product/10.1.2/ocs_1/jdk/bin/java
    -DORACLE_HOME=/home/oracle/product/10.1.2/ocs_1
    -jar
    /home/oracle/product/10.1.2/ocs_1/jlib/emConfigInstall.jar
    consolesn
    /home/oracle/product/10.1.2/ocs_1/sso/conf/consoleConfigSNSegment.xml
    Finished executing the call.Child Process has exited.
    SSO Configuration Assistant failed.
    I have checked thelog files but there is nothing in that.
    in the hosts file I have given fully qualiifed name as "nufastserver.local.nu"
    Can any bosy help me in this problem. I have tried reinstalling the OS also but the problem is still there at the same place

    I had exactly the same poblem on a red hat 64bit OS on the infrastructure install.
    But while trying to start opmn manually (that is definitely not to do to solve the problem). I had the error telling me that the shared library libdb.so.2 was not accessible.
    I did add the compat-db-4xxxxx.i386.rpm and then retry the check. Then all passed threw.
    To note that the .log file from the install says definitely nothing about this and that just trying to start the opmn did create another .log that gave me the file problem.
    Hope it can help for 64bit linux OS installation.

  • Error while installing 10g  on RHEL 5

    Hi Experts,
    Please look in below issue and help me to sort out this issue.
    Issue: While installing oracle 10g on RHEL 5.5, it through error while doing “linking ‘oracle net rep…”
    Error: Error in invokaing target ‘client_sharedlib of makefile ‘/home/oracle/oracle/product/10.2.0/db_2/network/lib/
    Ins_net_client.mk;. See ../… log for more details
    Regards

    897480 wrote:
    Hi,
    DB version: 10.2.0.1.0,
    I am using http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnRHEL5.php
    Why don't you use the official installation guide?
    >
    for prereq, pelase provide me if something i am missing, (any other docs for prereqs)
    RegardsAll of the official docs, including Installation Guides can be found at tahiti.oracle.com. Just drill down to your product and version.
    http://docs.oracle.com/cd/B19306_01/install.102/b15660/toc.htm

  • OCS 10g Cluster Installation  - Load Balancing

    Hi all,
    Anybody have sucessfully install and configure OCS 10g Cluster ?, with load balancing ?
    I'm trying to install OCS 10g cluster with a two node server setup, and using Oracle web Cache as the load balancer, but not sucessfull. Any hints ?
    Regards
    Lanang

    Just found out that Oracle Web Cache support HTTP and HTTPS only, no LDAP traffic yet. That why the cluster node installation failed. Trying using iptables NAT for the LDAP traffic, and the HTTP will use web cache.
    Regards
    Din

  • OCS 10g , AS 10g  In distributed configuration on Solaris 9

    HI,
    Trying to install OCS 10g with single IM and database. but it fails.
    First installed 10g release 1 (10.1.0.4.0), created meta directory on this server for AS 10.
    On second server installed IM successfully
    On third serve installed 10g iAS 10. and it registered with OID 10.1.2 successfuly.
    On fourth server I want to install OCS Applications and OCS database without IM as i want to use existing IM. Although installed database 10g R1 and patched it to 10.1.0.4.2 successfully but when OCS installation fail and gives error of OIDs.
    Its doesnot create schema in exisitng database so any OCS app cannot be installed.
    What could be be reason? If not what is other option i can use for single OID , multiple Application server and OCS Application suite.
    I have found from other that Collaboration Suite 10g is certified against Oracle Application Server 10g (10.1.2.0.2 or later - NOT 10.1.2.0.0). You can install Collaboration Suite 10g using the Identity Management and Metadata Repository of your OracleAS deployment. Any ideas ?Should i Install OCS suite first and integrate multiple AS with it?
    Thank You,
    Azhar

    Install dosnt finished at first when i created separate portal during install and stuck at portal configuration assisstant registeration,
    So i deinstalled everyhting and in secodn attempt , used exisitng portal of box two ( application server only) but still portalet configuration asssitant failed.
    I tried to manually register it with
    ./ocsprovs_installer.sh -mode complete -ouser cn=orcladmin -opass root123 -ipass root123 -host featt41.iacgrp.com -clist 7778 -cinv 9401
    but get error :
    Installing packages
    Registering providers
    Registration of Common failed due to the following exception:
    oracle.webdb.ohs.install.ProviderManagerException: An unexpected error occurred while trying to register the provider - Apache or OC4J may be down, the provider URL may be incorrect, or the Portal Database may not be able to contact the provider
    Registration of Common failed due to the following exception:
    oracle.webdb.ohs.install.ProviderManagerException: An unexpected error occurred while trying to register the provider - Apache or OC4J may be down, the provider URL may be incorrect, or the Portal Database may not be able to contact the provider
    but HTTP server is up and also restarted it.

  • How to install oracle 10g in Solaris10 Container

    I'd like to install oracle 10g in local zone of Solaris 10.
    But I don't know how to set "set noexec_user_stack=1".
    Now before install oracle 10g.
    I created /etc/system file in local zone.
    The file content is only "set noexec_user_stack=1".
    And I performed "set noexec_user_stack=1" command as root.
    Do I need to include "set noexec_user_stack=1" in /etc/system file in global zone?
    Please advice.

    did you check this?
    Installing OCS 10g R1 on Solaris 10

  • OCS 10g - Does it support multiple domain hosting

    Hi,
    We have installed OCS 10g for a domain university.edu
    Now, It provides only two available domains as local domains. ie, university.edu and .edu
    I would like to add some more sub domains (at least one more) such as college.university.edu to be a local domain in OCS for which it should accept emails.
    It this simple feature of multiple domain hosting supported in OCS.
    Kindly let us know some tips for it.
    Many thanks in advance.
    maas.

    I configured the domain about 2 years ago, so I have to go and look in my archive (which is at the office, I will not be there before the end of next week).
    The setup has 2 top level domains (one is .nl and one is .com). Under .nl about 4 domains are running, under .com only 1. If I remember corretly issues did raise with files. Calendar and mail are running as expected. This is on a 9.0.4 release though (not a OCS 10 R1 or R2). I did read loads of articles and had to patch even more. Luckily I printed all articles I read, so I can lookup the exect document numbers. If you can wait until next week, I can help you out.

  • OCS 10G running on Linux x86 32 bit  vs. Linux x86 64 bit OS

    We have Red Hat Linux R3 64 bits OS running on a x86 machine, we plan to install OCS 10G R1 on that machine. The OCS R1 media set I curently have is for Linux x86 32 bit, is it possible for 32 bits OCS running on 64 bit OS? Do we need to re install Linux 32 bit OS on that machine? Any suggestion will be highly appreciated.
    Regards,
    Jinsen

    Thanks for the response....
    Does this mean Peoplesoft cannot be installed and function in 32bit environment.
    I ask this because i currently do not have access to a 64bit environment and I'm trying
    to get a (local) PS application installed so that learn more about Peopletools and development.
    If I definitely need to upgrade/invest in a new machine, I will, I'm just trying to avoid if possible.
    thanks again

Maybe you are looking for

  • Erasing Sales data from SAP

    Hello everyone, We are going to give the SAP server to another company from inside our organization and we are 'cleaning' up the data they won't need. For instance, we will use transaction code OBR1 to clean up some credit movements, etc.. I know tha

  • Only 5 events show in month view?

    hi how come only up to five all day events show up in month view on certain days? that cannot be right, can it?? i have checked pref's etc and cannot fix this.i get the events, then just an elipse/dots for the other events on that day. when are they

  • No valid payment method found (T code F110 autoPayment)

    Dear All, When we define ranking order in bank determination for auto payment program. System issue no messages otherwise for not defining ranking order system issues error message No valid payment method found However, i have define payment method a

  • In VFX3,error is for GL requires an assignment to a cost object eventhough

    In VFX3, while releasing billing docu for Accounting  error is for GL40000000 requires an assignment to a cost object The below are Checked points : 1.In OKB9 for this cost element  40000000 cost center assignments are there with Business area wise.

  • Certain drawing or annotation tools cause adobe to crash - what can I do to fix this?

    When I try to use certain drawing or annotation tools Adobe crashes. Why? What  can I do to fix this?