Installing Oracle 10g on XP SP2 problems. No Database connectivity.. but
I use oracle 10g at work and have completed the training. I do not know how to configure ORacle to work at my home PC using either XP with SP2 or Vista with SP1. I got it all installed but it says I am not connected to Oracle database. I have also successfully installed it incl the Microsoft Loopback adapter. The database name is the same as when I installed: orcl how then do I set it up to read the sample schemas as in SQL Developer I do not know what is the connection name, user Name and password... which I believe I have both. How do I set up the Data Source (ODBC). Everything was installed as Default. SQL Developer and iSQl Plus starts ok but no database is shown to be connected. Strangely Express works fine but only using the Web interface. Trying to use SQL Developer but was unable to....
Phillip
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.
I recommend you read '2 Days DBA' from the documentation,this manual answer already many questions. And simply follow 'See the Installation Guide for more details ...'. Start simply , not with several client tools at the same time.
By the way if your home PC has a Windows Home Edition , that's not supported, neither for XP nor Vista.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14196/toc.htm
Werner
Similar Messages
-
ORA-12157 when installing Oracle 10g on Fedora 5?
Hi, Im installing Oracle 10g on Fedora 5, I did it once, but when I tried to set it up again I
got this error on the last part of the install...
ORA-12157: TNS: internal network communication error
Anybody know what might cause this?
I think I have installed all required RPMs and set environment variables, kernel parameters,
created oracle users and groups as needed, but still get the above error. I searched the error and some claim it is a problem using newer glibc 2.4.4, so I tried installing on Fedora 4 and had the same error even with glibc 2.3???
Thanks so much,
JonOracle Database 10g Release 2 (10.2.0.1) Installation On Fedora Core 5 (FC5 X86) Step by Step
This is a Server Installation with a minimum of 2G swap, secure Linux disabled and the following package groups installed:
Editors
Graphical Internet
Administration Tools
Base
X Window System
System Tools
Server Configuration Tools
GNOME Desktop Environment
Development Libraries
Development Tools
Legacy Development Support
Legacy Server Support
Alternative installations may require more packages to be loaded, in addition to the ones listed below.
Download Software
Unpack Files
Hosts File
Set Kernel Parameters
Setup
Installation
Post Installation
Download Software
Download the following software:
Oracle Database 10g Release 2 (10.2.0.1) Software
openmotif21-2.1.30-14.i386.rpm
Unpack Files
Unzip the files:
unzip 10201_database_linux32.zipYou should now have a single directory containing installation files. Depending on the age of the download this may either be named "db/Disk1" or "database".
Hosts File
The /etc/hosts file must contain a fully qualified name for the server:
<IP-address> <fully-qualified-machine-name> <machine-name>Set Kernel Parameters
Add the following lines to the /etc/sysctl.conf file:
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
# semaphores: semmsl, semmns, semopm, semmni
kernel.sem = 250 32000 100 128
fs.file-max = 65536
net.ipv4.ip_local_port_range = 1024 65000
net.core.rmem_default=262144
net.core.rmem_max=262144
net.core.wmem_default=262144
net.core.wmem_max=262144Run the following command to change the current kernel parameters:
/sbin/sysctl -pAdd the following lines to the /etc/security/limits.conf file:
* soft nproc 2047
* hard nproc 16384
* soft nofile 1024
* hard nofile 65536Add the following line to the /etc/pam.d/login file, if it does not already exist:
session required /lib/security/pam_limits.soDisable secure linux by editing the /etc/selinux/config file, making sure the SELINUX flag is set as follows:
SELINUX=disabledAlternatively, this alteration can be done using the GUI tool (Desktop > System Settings > Security Level). Click on the SELinux tab and disable the feature.
Setup
Install the following packages:
# From Fedora Core 5 DVD
cd /media/dvd/Fedora/RPMS
rpm -Uvh setarch-*
rpm -Uvh --force tcl-*
rpm -Uvh libXp-*
rpm -Uvh openmotif-2*
rpm -Uvh compat-db-*
rpm -Uvh compat-libstdc++-33*
rpm -Uvh compat-libf2c-32-*
rpm -Uvh compat-gcc-32-*
rpm -Uvh libaio-*
rpm -Uvh compat-gcc-32-c++-*
rpm -Uvh compat-libstdc++-296*
rpm -Uvh compat-libgcc-296*
# From download
rpm -Uvh openmotif21-2.1.30-14.i386.rpmCreate the new groups and users:
groupadd oinstall
groupadd dba
groupadd oper
useradd -g oinstall -G dba oracle
passwd oracleCreate the directories in which the Oracle software will be installed:
mkdir -p /u01/app/oracle/product/10.2.0/db_1
chown -R oracle.oinstall /u01Login as root and issue the following command:
xhost +<machine-name>Edit the /etc/redhat-release file replacing the current release information (Fedora Core release 5 (Bordeaux)) with the following:
redhat-4Login as the oracle user and add the following lines at the end of the .bash_profile file:
# Oracle Settings
TMP=/tmp; export TMP
TMPDIR=$TMP; export TMPDIR
ORACLE_BASE=/u01/app/oracle; export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/product/10.2.0/db_1; export ORACLE_HOME
ORACLE_SID=TSH1; export ORACLE_SID
ORACLE_TERM=xterm; export ORACLE_TERM
PATH=/usr/sbin:$PATH; export PATH
PATH=$ORACLE_HOME/bin:$PATH; export PATH
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib; export LD_LIBRARY_PATH
CLASSPATH=$ORACLE_HOME/jre:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib; export CLASSPATH
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fiInstallation
Log into the oracle user. If you are using X emulation then set the DISPLAY environmental variable:
DISPLAY=<machine-name>:0.0; export DISPLAYStart the Oracle Universal Installer (OUI) by issuing the following command in the database directory:
./runInstallerEnter the appropriate ORACLE_HOME and name then continue with the installation.
During the installation, before the linking phase, edit the contents of the "$ORACLE_HOME/bin/gennttab" file, amending the following entries:
# Change this...
LIB=`$ECHO ${TtoLIB} | $SED 's/ /\\
/g' | $GREP "^${T}:" | $AWK -F: '{print $2}'`
INI=`$ECHO ${TtoINI} | $SED 's/ /\\
/g' | $GREP "^${T}:" | $AWK -F: '{print $2}'`
BAS=`$ECHO ${TtoBAS} | $SED 's/ /\\
/g' | $GREP "^${T}:" | $AWK -F: '{print $2}'`
# To this...
LIB=`$ECHO ${TtoLIB} | $SED 's/ /\n/g' | $GREP "^${T}:" | $AWK -F: '{print $2}'`
INI=`$ECHO ${TtoINI} | $SED 's/ /\n/g' | $GREP "^${T}:" | $AWK -F: '{print $2}'`
BAS=`$ECHO ${TtoBAS} | $SED 's/ /\n/g' | $GREP "^${T}:" | $AWK -F: '{print $2}'`If you don't do this the ntcontab will hang indefinitely during the linking phase.
Post Installation
Edit the /etc/redhat-release file restoring the original release information:
Fedora Core release 5 (Bordeaux)Finally edit the /etc/oratab file setting the restart flag for each instance to 'Y':
TSH1:/u01/app/oracle/product/10.2.0/db_1:Y
Ref.: http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnFedora5.php -
How to install oracle 10g in Solaris10 Container
I'd like to install oracle 10g in local zone of Solaris 10.
But I don't know how to set "set noexec_user_stack=1".
Now before install oracle 10g.
I created /etc/system file in local zone.
The file content is only "set noexec_user_stack=1".
And I performed "set noexec_user_stack=1" command as root.
Do I need to include "set noexec_user_stack=1" in /etc/system file in global zone?
Please advice.did you check this?
Installing OCS 10g R1 on Solaris 10 -
No Listener service after installing Oracle 10g 2
Hi,
I have finished installing Oracle 10g 2 on a windows 2003 server. But no Listener windows service is not created. Any explanation ? Should I create the manually , How ?
Many thanks.No, but I created one after installing Oracle , by
DBCA.
I'm going to apply RDBMS 5337014 patch to upgrade to
10.2.0.3. Should I create Listener before ?
Thank you.
Message was edited by:
user522961For applying patch actually you don't need listener, but it is best if you have a listener for client to connect, isn't it?
cheers
FZ -
Problems: install oracle 10g 32 bits on RH 5.8 x64
Hello,
Someone has given me an oracle 10g 32 bits to install on a Redhat 5.8 64 bits server (no other server available).
I have a lot of errors during the installation process
exemple:
INFO: /usr/bin/ld: skipping incompatible /oracle/client/10x_32/lib/libxml10.a when searching for -lxml10
/usr/bin/ld: cannot find -lxml10
collect2: ld returned 1 exit status
I installed libxml10 64 and 32 bits on the system !
I would like to know if this configuration is POSSIBLE ???!
If yes, what is the solution / process to fix these compli. problems :-|
Thanks for your help !962147 wrote:
yes i read the installprocess and pre requisits:
But first "**is it possible to install oracle 10g 32 bits on redhat 64 bits ???* "
yes or no ? :-(
I've never seen any 32-bit software that DIDN'T run on a 64 bit OS, as long as the necessary libraries are installed.
I used this process: is it the good one ?
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-installation-on-rhel-5.php
Tim does a very nice job with his stuff on oracle-base, but that is NOT the official documentation. Why not use ORACLE'S own installation guide? Have you seen http://docs.oracle.com/cd/B19306_01/install.102/b15667/toc.htm
And why are you installing a a version of Oracle that is out of support?
And as long as you have a 64-bit OS, why would you want to run a 32-bit version of Oracle?
Edited by: 962147 on 29 sept. 2012 13:06Edited by: EdStevens on Sep 29, 2012 9:22 PM -
PROBLEM IN INSTALLING ORACLE 10G ON WINDOWS 2003 SERVER(WIN2K3)
Hi to all,
I have successfully removed Oracle 9i from win2k3.Am unable to install oracle 10g on the same system.............. problem : Universal installer window stucks at 14%, no error......no resource utilization by installer(as viewed from task manager).
Please help i ve read the oracle installation documentation as well............Ok gotcha !!!!!!!!!!!!! its a CRC error given by java
dats y it stucked :(
am hereby uploading the error:
java.util.zip.ZipException: invalid entry CRC (expected 0xc9e96252 but got 0x5651c9f5)
at java.util.zip.ZipInputStream.readEnd(Unknown Source)
at java.util.zip.ZipInputStream.read(Unknown Source)
at java.io.FilterInputStream.read(Unknown Source)
at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1421)
at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyFileFromJar(OiijFastJarExtracter.java:258)
at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyJarContents(OiijFastJarExtracter.java:194)
at oracle.sysman.oii.oiij.OiijFastJarExtracter.extract(OiijFastJarExtracter.java:143)
at oracle.sysman.oii.oiij.OiijJarExtractQueue$OiijJarExtractWorker.run(OiijJarExtractQueue.java:341)
CAN SOMEONE SUGGEST ME WHAT TO DO NOW ???????????plz reply
ANKUR SHARMA -
Problem on Installing Oracle 10g on Windows XP Professional
I'm getting the following error while I install Oracle 10g R1, on Windows XP Professional.
The Path enviroment variable is bigger than 1023 characters. This value cannont be set.
Has anyone seen this error before?Hi,
you have two option to start your oracle service. your problem is your oracle serivce is not start.
for that you can start manully....
like
on command prompt.
cmd>net start oracleservice<sid>
or
you can set automatic for oracle service.
go services window. start >>>> run >>>> services.msc <<<enter>>>
check and select oracle services and right click and set automatic..
every time your system is reboot then oracle service is automatically is start.
regards
Taj -
Problem to install oracle 10g on linux
Hi,
I want to install Oracle 10g on Linux
(I have Linux X76CLLCFAUU 2.6.18-194.17.1.el5 #1 SMP Mon Sep 20 07:12:06 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux)
, when i run ./runInstaller, i have the following error , do you known what is the problem :
Démarrage d'Oracle Universal Installer...
Vérification des exigences du programme d'installation...
Vérification de la version du système d'exploitation : il doit s'agir deredhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Echec <<<<
Fermeture d'Oracle Universal Installer ; le journal de cette session figure à l'emplacement /tmp/OraInstall2010-11-17_05-03-15PM/installActions2010-11-17_05-03-15PM.logHello,
Vérification de la version du système d'exploitation : il doit s'agir deredhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Echec <<<<So, when the Installer checked the OS Release, it didn't find the correct one.
The message said that you should have one of this OS:
Redhat-3, SuSE-9, Redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2As previously posted, you should check from the Installation Guide that you have the right OS requirements before running the Installer.
Hope this help.
Best regards,
Jean-Valentin -
Installing Oracle 10g rac on linux 4 using vmware :problem
Hi Expert ,
I'm facing problem on installing oracle 10g rac on centos 4x using vmware, installation is showing errors . The command failed are oifcfg, cluvfy
on running ./cluvfy stage -post crsinst -n rac1,rac2
error:
OCR integrity found invalid for rac1
OCR integrity found invalid for rac2
Please advice...
regards,
Shaanhi Experts,
orccheck failed for one of the node, can you please suggest what needs to be done now..
filename :/dev/raw/raw1
error "device/file integrity check failed"
error "device not configured"
Regards
Message was edited by:
Shaan_dmp -
Display Problem while installing Oracle 10g on RHEL 5
All,
I'm in the process of installing Oracle 10g R2 on RHEL4, when i'm trying to issue ./runInstaller i'm getting the below error.
I could get the xclock on the host, even then i'm getting below display error, could any one please help me to resolve this ?
e@dhcppc6 database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-11-18_02-21-10PM. Please wait ...[oracle@dhcppc6 database]$ Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(Unknown Source)
at java.awt.Window.init(Unknown Source)
at java.awt.Window.<init>(Unknown Source)
at java.awt.Frame.<init>(Unknown Source)
at oracle.ewt.popup.PopupFrame.<init>(Unknown Source)
at oracle.ewt.lwAWT.BufferedFrame.<init>(Unknown Source)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.<init>(OiocOneClickInstaller.java:378)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:2091)
[oracle@dhcppc6 database]$export DISPLAY=<hostname>:0
Are you running from the same terminal or connecting remotely?
If connecting remotely, you need a Xserver running on the client machine. -
Ora-00604 while installing Oracle 10g on Windows XP SP2
I was installing Oracle 10g on Windows XP but the dbca was failling. So I tried to create a database manually.
But every time I launch this:
"SQL> startup nomount pfile="C:\oracle\product\10.2.0\admin\XP10G\scripts\initXP10G.ora";"
I always had:
ORA-00604: error occurred at recursive SQL level 1
ORA-02248: invalid option for ALTER SESSION
I tried to change some memory value in the init*.ora without more success.
So if anyone has been had such issue; he would be an help for me.
Thansks
MUGANGAinitXP10G.ora is a 3 Kbytes file created by OEM and updated by Dos edit program. Here bellow is the contain:
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# Cache and I/O
db_block_size=8192
db_cache_size=25165824
db_file_multiblock_read_count=16
# File Configuration
control_files=("C:\oracle\product\10.2.0\oradata\XP10G\control01.ctl", "C:\oracle\product\10.2.0\oradata\XP10G\control02.ctl", "C:\oracle\product\10.2.0\oradata\XP10G\control03.ctl")
db_recovery_file_dest=C:\oracle\product\10.2.0\flash_recovery_area
db_recovery_file_dest_size=2147483648
# Cursors and Library Cache
open_cursors=150
processes=100
# Diagnostics and Statistics
background_dump_dest=C:\oracle\product\10.2.0\admin\XP10G\bdump
core_dump_dest=C:\oracle\product\10.2.0\admin\XP10G\cdump
user_dump_dest=C:\oracle\product\10.2.0\admin\XP10G\udump
# Miscellaneous
compatible=10.2.0.1.0
# Job Queues
job_queue_processes=10
# Database Identification
db_domain=""
db_name=XP10G
# SGA Memory
sga_target=177209344
# Processes and Sessions
processes=150
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_tablespace=UNDOTBS1
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=XP10GXDB)"
# Security and Auditing
audit_file_dest=C:\oracle\product\10.2.0\admin\XP10G\adump
remote_login_passwordfile=EXCLUSIVE
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=58720256
shared_pool_size=83886080
nls_territory='SWITZERLAND'
nls_language='FRENCH' -
Installing oracle 10g on windows XP is giving problem
Iam successfully installed oracle 10g on top of that iam installing some scripts to load ALUI.(aqua logic user interaction)
in that when iam running this script (CreateService.bat PLUM10 plum10) facing below error.
D:\oracle\product\10.2.0\admin\PLUM10\plumtreescripts>CreateService.bat PLUM10 p
lum10
D:\oracle\product\10.2.0\admin\PLUM10\plumtreescripts>ORADIM -NEW -SID PLUM10 -I
NTPWD plum10 -STARTMODE AUTO -PFILE D:\oracle\admin\PLUM10\pfile\initPLUM10.ora
1>>CreateService.log
D:\oracle\product\10.2.0\admin\PLUM10\plumtreescripts>SET ORACLE_SID=PLUM10
D:\oracle\product\10.2.0\admin\PLUM10\plumtreescripts>echo PLUM10 1>>SetEnvServ
ice.log
D:\oracle\product\10.2.0\admin\PLUM10\plumtreescripts>type CreateService.log
Unable to find error file %ORACLE_HOME%\RDBMS\opw<lang>.msb
Message 51 not found; No message file for product=RDBMS, facility=ORADIM
Unable to find error file %ORACLE_HOME%\RDBMS\opw<lang>.msb
DIM-00019: Message 19 not found; No message file for product=RDBMS, facility=ORA
DIM
O/S-Error: (OS 1073) The specified service already exists.
Unable to find error file %ORACLE_HOME%\RDBMS\opw<lang>.msb
DIM-00019: Message 19 not found; No message file for product=RDBMS, facility=ORA
DIM
O/S-Error: (OS 1073) The specified service already exists.
Unable to find error file %ORACLE_HOME%\RDBMS\opw<lang>.msb
Message 51 not found; No message file for product=RDBMS, facility=ORADIM
Unable to find error file %ORACLE_HOME%\RDBMS\opw<lang>.msb
DIM-00019: Message 19 not found; No message file for product=RDBMS, facility=ORA
DIM
O/S-Error: (OS 1073) The specified service already exists.
Unable to find error file %ORACLE_HOME%\RDBMS\opw<lang>.msb
DIM-00019: Message 19 not found; No message file for product=RDBMS, facility=ORA
DIM
O/S-Error: (OS 1073) The specified service already exists.
Unable to find error file %ORACLE_HOME%\RDBMS\opw<lang>.msb
DIM-00019: Message 19 not found; No message file for product=RDBMS, facility=ORA
DIM
O/S-Error: (OS 1073) The specified service already exists.
D:\oracle\product\10.2.0\admin\PLUM10\plumtreescripts>
If any body help is much needed...
Thanks u so much...maybeSET ORACLE_HOME=D:\oracle\product\10.2.0
-
Problem when installing oracle 10g on RHEL-4
greetings,
i have been trying to install oracle 10g on my linux machine for the past 10 days, everytimje i do all the steps and change the kernel parameters but when i start the runinstaller file. i get the folloeing error.
I don't know what this error is or why is it happening
you can find a snapshot of the error on the following link
http://www.4shared.com/dir/4180305/6152dc22/Oracle_errors.html
also another error is arising when i log in to the linux box with the user oracle... i have been having these errors for the past 10 days and i reached to the point where my knowledge won't help me more than ur experiences.
a snapshot of this error also is available in the above linkWhile I understand a picture is worth a thousand words, I backed off from the site as soon as it started providing active ads and spy-ware-like indications. If you want help (from me at least) please describe the symptoms.
You could also use the following sites to help with the install:
http://www.puschitz.com and http://ivan.kartik.sk -
Problems Installing Oracle 10g in Red Hat enterprise 5.3
I am trying to install Oracle 10g in Linux RH 5.3 the I get the following error
Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-05-07_11-08-08AM/jre/1.4.2/lib/i386/
libawt.so: libXp.so.6: cannot open shared object file: No such file or directoryThis should help you out.
"Exception java.lang.UnsatisfiedLinkError: ../jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory occurred" on RHEL5/OEL5 for 10.2 x86 or x86_64 install
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=443617.1 -
Problem in installing oracle 10g dev suit
Hi all
my name is farnaw, i have successfully installed oracle 102 R2 on linux enterprise 4 seccuessfully, know i want to instal oracle 10g developer suit latest version (10.1.2.0.2)
acan any body help me how can i install dev suit, i need any link or steps to install this
Reply will be highly appreciated
With regards
Thnks in advance
farnawYou can find all the Oracle documentation at http://docs.oracle.com
From there you can browse to the Developer Suite documentation, including the installation guide, at http://download.oracle.com/docs/cd/B25016_07//doc/dl/core.htm
Maybe you are looking for
-
Hi all, Can anyone please send me the link to the 'How To... Extract Data with OPEN HUB to a Customer Defined Logical Filename'. I just cannot find this document. Thanks Bryn
-
Download error on ipad mini with amazon book
i have downloaded many books that i have purchased on Amazon, onto my ipad mini kindle app with no problem. This one book, however, won't download. I get a msg "Download error." not sure what to do. I can't figure out how to delete it from the ip
-
Help with Multiselect List Item
Assuming one employee can work for multiple departments, I want to display the departments employee 7844 works for preselected in a multiselect list. I am using the following query statement in a report region. select htmldb_item.select_list_from_que
-
I am running Windows Vista Ultimate and using Adobe Acrobat 8.1.2 When I opened an edible PDF file, suddenly the entire text shrunk and displayed in the right lower corner of the page. Any solution?
-
Watched folder endpoint - error
Hello all, I am currently developing process that with watched folder endpoit. When I deploy process, exception is thrown (deployment fails). I checked LC has access to /opt/TransferScans folder - I created dummy process (endpoint SOAP) which reads,