Installing parser for the PLSQL

I have downloaded xdk_plsql_9_2_0_6_0 from Oracle Technology Network XML page ( http://www.oracle.com/technology/tech/xml/xdk/software/prod/xdk_plsql.html ) and extracted the files in a folder named xdk_plsql in C directory while oracle is loaded in the same directory and saved in oracle / ora91 as ORA_Home.
to load the parser i went to xdk_plsql/lib and executed loadjava -user <username>/<password>@database name -verbose xmlparserv2.jar
and loadjava -user <username>/<password>@database name -verbose xmlplsql.jar
all the time i get the error saying......
creating : resource META-INF/MANIFEST.MF
loading : resource META-INF/MANIFEST.MF
Error while creating resource META-INF/MANIFEST.MF
ORA-29547: Java system class not available: oracle/aurora/rdbms/Compiler
the loading and creating of various other files take place followed by messages saying shorcut name cannot be created, java_home needs to be declared. etc.
as per my knowledge, this is happening since java system file is not being located properly.
kindly help as soon as possible in this regard.
thanx

Thanks,
That solved the problem.
Closing.

Similar Messages

Can anyone tell me where to find an install guide for the Liveoffice app.

Can anyone tell me where to find an install guide for the Liveoffice app.
Thanks
Jeff

Hi Jeff,
You can download the install guide for Liveoffice application from the link provided below,
http://help.sap.com/businessobject/product_guides/boexi/en/boXI_LiveOfficeInstall_en.pdf
Hope this helps you.
Regards,
Abhijeet T.

I am installing CS6, for the first time, on a Mac, from a CD. I have a valid serial number that I just obtained. When I enter the serial number, it is not validated and I cannot continue.

I am installing CS6, for the first time, on a Mac, from a CD. I have a valid serial number that I just obtained. When I enter the serial number, it is not validated and I cannot continue.

Error "The serial number is not valid for this product" | Creative Suite

How to install IGS for the ABAP trial version SP11

Hi,
Please can anyone provide me with the steps to install IGS for the ABAP trial version SP11.
Which version of IGS to download?
What are extracting the SAR files what steps should be followed?
Please advice,
Thanks,
sam

Hi Rich and Sam,
here is some kind of how to guide which hopefully contains all steps you need do perform.
Best regards
Matthias
The IGS consists of a directory structure under DIR_INSTANCE/igs (containing folders and configuration files) and executables and libraires under DIR_EXECUTABLE. These excutables and libraries are available on the Service Marketplace in archive igsexe.sar. This file has to be extracted to DIR_EXECUTABLE.
On the Service Marketplace you also find the file igshelper.sar which contains the above mentioned folder structure that must be extracted to DIR_INSTANCE. Normally this comes with a Web AS installation.
Afterwards please go to DIR_INSTANCE/igs/conf and rename the files gfwchart.tpl, xmlchart.tpl and bwgis.tpl to gfwchart, xmlchart and bwgis, see notes 531668, 596825 and 1011372.
To include the IGS to the start of the system you have to add the following to the start profile:
Start internet graphics server
IG = $(DIREXECUTABLE)\igswd$(FT_EXE)
Start_Program_03 = local $(_IG) -mode=profile pf=$(_PF)
Normally parameter _PF is defined as absolute path to the instance profile. If not use the absolute path instead.
To enable HTTP administration you have to add the instance profile parameter:
igs/listener/http= 4$(SAPSYSTEM)80,administration
HTTP administration access was disabled by default with patch 4, see note 959358.
If your system is a Java only system you must deactivate the RFC listener with the instance profile entry:
igs/listener/rfc=disable
For using the IGS with Web Dynpro Java you must define the IgsUrl according to note 704604. After a system restart the IGS should be up and running.
You can test if the IGS is up and running with the link http://localhost:4$(SAPSYSTEM)80 or in an ABAP system via report GRAPHICS_IGS_ADMIN.

I have just installed iTunes for the first time. When I run the application I get a "iTunes not working" message. Operating system Vista (32 bit). I have tried reinstalling with all firewalls off, but still no success. Have other people had this problem?

I have just installed iTunes for the first time. When I run the application I get a "iTunes not working" message. Operating system Vista (32 bit). I have tried reinstalling with all firewalls off, but still no success. Have other people had this problem?

Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

HT4718 My macbook air is stuck at the "installing software updated" screen while installing update for the osX. What should I do?

My macbook air is stuck at the "installing software updated" screen while installing update for the osX. What should I do?

Welcome to Apple Support Communities
If your Mac has been installing software updates for a long time, Software Update is probably frozen. Hold the Power button until your MacBook Air turns off, and turn it on again. OS X should start up.

HT3910 I am selling my Macbook Air 2008 and need to reformat it back to it's factory settings. I've been reading the help but I don't seem to have a re-install drive for the USB port. Is this something post 2008 or can I get one from somewhere?

I am selling my Macbook Air 2008 and need to reformat it back to it's factory settings. I've been reading the help but I don't seem to have a re-install drive for the USB port. Is this something post 2008 or can I get one from somewhere?

Hey Stella,
Welcome to Apple Support Communities, and thanks for the question! I'd read through the following article before selling your Mac - it'll include instructions on how to reformat your hard drive:
What to do before selling or giving away your Mac
http://support.apple.com/kb/HT5189
All the best,
David

Re-install software for the C6280 all in one printer... get an error message "can't find file"

need to re-install the software for the c6280 all in one printer. downloaded the latest install package from the HP web site. During the install process, I get an error message .. can't find user/appdata/local/temp/7z256315/setup/.....setup/blocksysuser........
the folder 7z256315 does not exist on the HD.
I also get a message that it can't find PS_A10_02_software.msi.
Windows 7 , C6280 all in one printer. Printer is connected to the router. The desktop computer is connected via an ethernet cable, the laptop/ipad/iphone/internet radio are connected via wireless to the router.
hope you can help
thanks
charlie
This question was solved.
View Solution.

Hi cberistain,
Follow the steps below, and let me know what happens?
Step one: Clear temp directory
Type %temp% in the run or search for programs and files field
Highlight all the files in this folder, and then press the delete key to delete. If you get a message that the file is in use you will need to skip this file(s).
Continue with Step 2 below
Step two: Downloaded and extracted to your system:
1. Download the full feature software and drivers
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-77039-1&cc=us&dlc=en&lc=en&...=
2. Once the download is finished double click on the file to extract the software.
3. When the installation window opens press the cancel button to stop the installation
4. Type %temp% in the run or search for programs and files field
5. Look for, and open the folder starting with 7z (Example: 7zS2356)
6. Right click on the folder, and select Copy
7. Close that window, and all your open windows, and then in the middle of the desktop right click your mouse, and select Paste. This will move the 7z folder to your desktop.
8. Open the 7z folder you just copied to your desktop
9. Open folder Util
10. Open folder CCC
11. Run the uninstall_L4
12. When the uninstall has completed restart the computer
13. Run Disk cleanup from Accessories\ System Tools folder under all programs
14. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
15. Open the 7z folder, and then double click on the Setup.exe file which will be toward the bottom of the open window. Follow the on screen instructions to reinstall your printer.
Let me know if you are able to successfully install the software and driver, and are able to print & scan?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Installing CE for the second time doesn't work ?

Hi
Recently my CE 7.1SR3 expired and I have installed it successfully for the second time, but the node server0 is not running (yellow colored) after installation and is showing starting apps forever.
Any clues what's going wrong..
Can't I install the software again in the same system ?
Thanks in advance
ASR

Folks
Problem solved. Java server node started after couple of restarting the node only and it took around 40 mins to start with 2 GB memory !!!.
Thanks

Need help with installing Windows for the bar exam

I need to retake the bar exam in Feb 2011 and I've decided to switch to typing. I am trying to figure out what Windows I need (the software says XP is fine but is that even available anymore)- so can someone walk me through this process? I've partioned my hard drive with the default 5GB but should it be more?
I'm looking at buying Windows- is XP okay or should I shell out for 7-i.e. is one more compatible with Macs?
And then finally, in the installation instructions they mention that I need my Mac OS disc for the process- is that the snow leopard disc or something else? My discs are in storage right now so should I wait until I get them before starting this process or can I get replacements if I accidentally threw them out in moving?
Sorry for all the questions, but well, I'm racing to get everything done and I want to make sure I don't crash my system halfway through the exam!

You don't need Boot Camp, but even XP will have a lot of stuff to update from after the install, and that takes temp space. Just as your Mac shows 5-10GB there is add'l hidden space used.
Apple's 'requirements' has gotten others in trouble and I was pretty sure it was more like 10GB. Plus a lot of XP discs are now SP3.
XP out of the box but connected to the net is just waiting for malware, average is 15 minutes to be infected. 7 is better and just in case you need it again.
System Builder can come in 32 or 64-bit but XP is 32-bit only.
VirtualBox by Oracle is a free VM.
1GB for one program actually seems like a lot, or is that RAM requirement?

Installing DsFW for the First Time, new tree?

I've been reading the documentation but there is some stuff I don't get.
It seems I can install into a new tree and choose the non-name-mapped deployment. Is this a popular choice?
Does this provide flexibility or limit it?
I read the following statement "Novell doesn't support installing other Novell products within a Domain Services for Windows (DSfW) partition." at Novell Doc: OES 11 SP1: Domain Services for Windows Administration Guide - Unsupported Service Combinations
I think that if I choose a non-name-mapped install then the entire new eDirectory tree will live inside the DSfW partition, or was that statement meant for name-mapped setups? Does that mean that we would not be able to install ZenWorks, Filr or GroupWise into the new tree? If true this suggests non-name-mapped setups are more limiting than name-mapped setups, and probably to be avoided.
Thanks for the free wisdom.
Background:
There is an existing Netware server 6.0 serving about 20 users as a file server but there doesn't appear to be any interest in migration or coexistance. A fresh clean tree is a core element of the plan so far. I'm thinking of three or four OES servers: Two DSfW servers (DHCP, DNS, eDir, domain controllers, SLP), a file server and a Filr server.
There is other stuff in the environment, including openSUSE DHCP and DNS, SLES application server, various other servers for databases and web stuff, Windows domain for 4 users to use Remote Desktop Services. A bunch of Windows desktops and a proliferation of mobile devices (hence interest in Filr is drive the change right now).
Hopefully over time the other servers will be part of the new eDirectory tree for authentication and ease of management.
If I choose a name-mapped setup, I think I need to install 4 or 5 servers: one eDirectory base server (Certificate Server and root partition), then at least one DSfW server (DHCP, DNS, eDir, domain controller), then file server and Filr server.

Originally Posted by psahukar
Hi,
...snip...
1. Install OES CIFS server on the first server. This will give a new eDirectory tree with a file server.
2. Install 2 DSfW servers (using name mapped mode) into the eDirectory tree. You have the option to choose the top most container (i.e. whole tree) or a partition for the DSfW installation / configuration. DSfW will install DNS service on the first DSfW server by default. It is recommended to keep the DHCP server on a non-DSfW server.
3. Install the Filr server on the fourth server
Thanks for the recommendations, Pavreen.
Please confirm the main message you are conveying is that a name-mapped installating is best. Is it true that the reason this is best is to allow other Novell products (ZenWorks, for example) to be installed? Is it also true that non-name-mapped installs are rare and offer few (if any) advantages?
When you say, with respect to the DSfW servers, that I have the option to install DSfW using the top-most container, are you recommending that the second server be a DSfW server with DSfW in the top of the tree? This seems to be the thing that is against the rules according to Novell Doc: OES 11 SP1: Domain Services for Windows Administration Guide - Unsupported Service Combinations "Novell doesn't support installing other Novell products within a Domain Services for Windows (DSfW) partition." But it also the thing I'm sure I don't understand (and hence the post).
In my reading I didn't encounter a hint that DHCP should be separate from DSfW. DHCP conflicts with DSfW specifically or it introduces challenges more generally with other OES components?
The number of servers (all Xen PV on SLES) will be chosen to accomodate flexibility. So I think I will not make the CIFS server the first. The first server will be the permanent "Novell Certificate Server" and I think I should make that small and simple to be sure that future upgrades or restore operations are less likely to create challenges for such a critical, and seemingly inflexibly permanent, piece of eDirectory infrastructure.
What do you think of this modification to your recommendation:
1. First server is OES Novell eDirectory "Novell Certificate Server" + DHCP + iManager
2. Then two DSfW servers (DNS). Necessarily name-mapped. The partition question, which was the thing I was least certain about, is still uncertain to me.
3. Then one file server (NSS, CIFS and NCP). I'm also inclined to have a second DHCP as backup.
4. Then one Filr
5. Then probably a ZenWorks server in the further future

Datacleanse name parsing for the English dictionary

I am using the person_firm_en (English) dictionary for name parsing (Datacleanse for Data Services XI) for Canada data. There are many situations where the full name consists of 3 names and datacleanse parses the 2nd and the 3rd name into the 'family name' field. Thus, instead of parsing the 2nd name into the given_name2 field, it puts it with the last name into the family_name field. Some examples are:
Example 1 - ROBERT GRAHAM LEITCH
given_name1 - Robert
family_name - Graham Leitch
Example 2 - JEREMY HURON NEAL
given_name1 - Jeremy
family_name - Huron Neal
SAP's response to this issue is that each entry which is not being parsed out as given_name2 needs to have the person_firm_en dictionary entry edited to add it as a given name. This can also impact its parsing if this name appears as a last name.
Does anyone have any other suggestions or any rule/code that you have implemented to handle such situations?

Shenaz,
We have struggled quite a bit with the name parsing n the Data Cleanse (especially when using version 12.1.1). I wrote some custom functions that do name parsing and in many cases, especially for middle names, they seem to do a better job. Below is the code that returns Person1 Middle name from a passed in mixed name value. The functions CF_Name_Standardize_Replace_Chars and CF_Remove_Extra_Spaces contain find\replace tables and remove things like punctuation, MR, MRS, empty space, etc.
1 Have 5 other functions, to pull out First, Middle, and Last names of persons 1 and 2. They look very similar, the only different part being the last section where the word pattern is analyzed and the decision is made as to which word is to be returned.
I could get you code for the others if it would help.
#prep
$return_string = '';
$word_1 = '';
$word_2 = '';
$word_3 = '';
$word_4 = '';
$word_5 = '';
$word_6 = '';
$word_7 = '';
$word_count = 0;
$working_string = ltrim_blanks ( rtrim_blanks( $input_string ) );
$working_string = upper( $working_string );
$working_string = CF_Name_Standardize_Replace_Chars( $working_string );
if ( nvl ( index ( $working_string, ',', 1), 0 ) = 0)
begin
$has_comma = 'false';
end
else
begin
$has_comma = 'true';
end
#assign the words to their variables
if( $has_comma = 'true' )
begin
$split_index = index ( $working_string, ',', 1);
$word_1 = ltrim_blanks(rtrim_blanks(substr( $working_string, 1, $split_index - 1 )));
$word_1 = CF_Remove_Extra_Spaces( $word_1 );
$word_1 = replace_substr( $word_1 , ' ', '-' ); #we will assume it is a last name and should be hyphenated
$working_string = substr( $working_string, $split_index + 1, 255 );
$working_string = ltrim_blanks( rtrim_blanks( replace_substr( $working_string , ',', ' ' ) ) );
$working_string = CF_Remove_Extra_Spaces( $working_string );
#these are now offset by one because we removed the first "word" before the comma.
$word_2 = nvl( word( $working_string, 1 ), '');
$word_3 = nvl( word( $working_string, 2 ), '');
$word_4 = nvl( word( $working_string, 3 ), '');
$word_5 = nvl( word( $working_string, 4 ), '');
$word_6 = nvl( word( $working_string, 5 ), '');
$word_7 = nvl( word( $working_string, 6 ), '');
end
else
begin
$working_string = CF_Remove_Extra_Spaces( $working_string );
$word_1 = nvl( word( $working_string, 1 ), '');
$word_2 = nvl( word( $working_string, 2 ), '');
$word_3 = nvl( word( $working_string, 3 ), '');
$word_4 = nvl( word( $working_string, 4 ), '');
$word_5 = nvl( word( $working_string, 5 ), '');
$word_6 = nvl( word( $working_string, 6 ), '');
$word_7 = nvl( word( $working_string, 7 ), '');
end
#figure out what the word count is
if ($word_1 != '')
begin
$word_count = 1;
end
if ($word_2 != '')
begin
$word_count = 2;
end
if ($word_3 != '')
begin
$word_count = 3;
end
if ($word_4 != '')
begin
$word_count = 4;
end
if ($word_5 != '')
begin
$word_count = 5;
end
if ($word_6 != '')
begin
$word_count = 6;
end
if ($word_7 != '')
begin
$word_count = 7;
end
#and finally, analyze the word pattern and make a decision where the desired word is
if ($has_comma = 'true')
begin
if ($word_count = 6 AND $word_4 = '&')
begin
    $return_string = $word_3;
end
if ($word_count = 5 AND $word_4 = '&')
begin
    $return_string = $word_3;
end
if ($word_count = 4 AND $word_3 != '&')
begin
    $return_string = $word_3 || '-' || $word_4; #assume a middle name that should be hyphenated in this case?? i.e. Smith, Damian John-Doe (From Smith, Damian John Doe) - (Return John-Doe)
end
if ($word_count = 3)
begin
    $return_string = $word_3;
end
end
else
begin
if ($word_count = 3 AND $word_2 != '&')
begin
    $return_string = $word_2;
end
if ($word_count = 4 AND $word_2 != '&' AND $word_3 != '&' AND $word_4 != '&')
begin
    $return_string = $word_2;
end
if ($word_count > 4 AND $word_3 = '&')
begin
    #this stuff just in case we have a middle "initial" in the second position. In that case we will assume a middle name is there
    if (length( $word_2 ) = 1)
     begin
      $return_string = $word_2;
    end
    if (length( $word_2 ) = 2 AND index($word_2, '.', 1) = 2)
     begin
      $return_string = $word_2;
    end
    #end of middle "initial" search.
end
if ($word_count > 5 AND $word_4 = '&')
begin
    $return_string = $word_2;
end
end
Return init_cap( $return_string );

Can not install software for the camera on my G10

Hello
New poster today seems my CD/DVD media drive has stopped working, tried to install software for new camera, just getting blue screen and a small flashing disc, seems there is no power in drive.
Any advice welcome only had machine since late June 2005.Am I doing something wrong or does it sound like a service problem
THANK YOU!
JIM.

Hi
Well like xaver said it could be a hardware problem but before you contact the ASP try to remove the drive from the device manager. After new reboot the OS should recognizes the driver again. Maybe this procedure will help you to solve this problem. But if not, please contact the service partner
Bye

Very annoying 11g OUI install error for the oracle clusterware

Clean install of 11g RAC Clusterware downloaded from oracle site today
./runcluvfy.sh stage -pre crsinst -n lin1,lin2 -verbose
...everything passes just fine. Great. Time to install the clusterware.
[oracle@lin1]$ ./runInstaller
Installer starts, prerequisite checks are done for **Oracle 9.2 RAC and OCR*** Where did 9.2 come from?. All the checks succeed so... whatever...just move on.
I get a few screens to the "Specify Cluster Configuration" sceen.
I enter the following for the Cluster Name: lin_cluster
I enter the following for the 2 nodes:
Public Node Name Private Node Name Virtual Host Name
lin1 lin1-priv lin1-vip
lin2 lin2-priv lin2-vip
Click next.....ack!! Error: "You must enter unique values for the public node name, the private node name and the virtual hostname for all nodes in the cluster. The name, lin1, that you entered is being used by more than once [sic] for the same node"
So, what to do? How more unique can the names be?
There is an option to "Use A configuration File..." and browse for it. Anyone know where that file is?
Any assistance much appreciated.

Ice,
Yes my friend...well done. There was an incorrect entry in my /etc/hosts file as follows:
[root@lin1 ~]# more /etc/hosts
127.0.0.1 localhost.localdomain localhost
192.168.1.50 shiva
# Public Network - (eth0)
192.168.1.100 lin1
192.168.1.101 lin2
# Private Interconnect - (eth1)
192.168.1.100 lin1-priv <-----right here...should be 192.168.2.100
192.168.2.101 lin2-priv
# Public Virtual IP (VIP) - (eth0)
192.168.1.200 lin1-vip
192.168.1.201 lin2-vip
# Private Storage Network for Openfiler - (eth1)
192.168.1.195 openfiler
192.168.2.195 openfiler-priv
Thank you so much for your assistance thus far. I'm already on to the next problem. These RAC installations are new territory for me and are a real challenge. - thx, yomick

[SOLVED]....install Arch, for the first time, am i doing it right?

The first try, it failed at grub boot(froze with blank screen), so now I'm going to install for the 2nd time and I need your help to confirm if the grub installation procedure below is correct.. (Thinkpad x61s-64bit machine)
# mkinitcpio -p linux
# pacman -S grub-bios bash-completion os-prober
# grub-install --target=i386-pc --recheck /dev/sda
# cp /usr/share/locale/en\@quot/LC_MESSAGES/grub.mo /boot/grub/locale/en.mo
# grub-mkconfig -o /boot/grub/grub.cfg
# exit
# umount -R /mnt
# reboot
..or should i just use Syslinux instead? There won't be any other OS on the disk except there's a partition i made previously(ext 4) that i used for file storage purposes(music,video,docs etc) and the said partition now reside in sda4 and do not want to delete that as ive got so much stuff in it and my external HD is full. so i'll have to install Arch on sda1/2/3.
my partitioning scheme would be 2g swap, 20g root and 30g home.
Thank you
Last edited by MrPotato (2014-01-06 04:46:08)

MrPotato wrote:
The first try, it failed at grub boot(froze with blank screen), so now I'm going to install for the 2nd time and I need your help to confirm if the grub installation procedure below is correct.. (Thinkpad x61s-64bit machine)
# mkinitcpio -p linux
# pacman -S grub-bios bash-completion os-prober
# grub-install --target=i386-pc --recheck /dev/sda
# cp /usr/share/locale/en\@quot/LC_MESSAGES/grub.mo /boot/grub/locale/en.mo
# grub-mkconfig -o /boot/grub/grub.cfg
# exit
# umount -R /mnt
# reboot
..or should i just use Syslinux instead? There won't be any other OS on the disk except there's a partition i made previously(ext 4) that i used for file storage purposes(music,video,docs etc) and the said partition now reside in sda4 and do not want to delete that as ive got so much stuff in it and my external HD is full. so i'll have to install Arch on sda1/2/3.
my partitioning scheme would be 2g swap, 20g root and 30g home.
Thank you
You could just use syslinux, but i guess you just had a bad timing with your installation there are a few bugs present with grub at the moment, which are actually already fixed upstream, but not yet available from the official arch repositories. Did you notice any bug messages when running "grub-mkconfig" ? There were probably some "syntax-errors", but they can be easily fixed (https://bugs.archlinux.org/task/38234?project=1&cat[0]=31&string=grub); the method with "GRUB_DISABLE_SUBMENU=y" works fine and you could fix it by "chrooting" into your system again from the live-installation-cd/usb. Alternatively you could enable the testing-repos for installing grub; this version works without the syntax errors, but there is another bug with multiple kernel-entries So the first way would be probably the best way to fix grub at the moment.
Last edited by tumas (2014-01-05 15:57:54)

Installing parser for the PLSQL

Similar Messages

Maybe you are looking for