Installing SQL5 on UCCX 7.0

I have a new install of UCCX 7.0 that we're going to make HA in the future.  According to the documentation i should upgrade from MSDE to SQL.  According to the documentation http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf MS SQL 2005 is compatible with this version of UCCX.  We already have a spare license for sql 2005 so installing that makes the most sense.
The question is, what steps are needed to correctly install SQL so that it replaces MSDE in the manner that UCCX is expecting?
JM

First, UCCE 7.x configuration and historical database is only certified to SQL 2000. The reference to SQL 2005 in the matrix is for database integration only.  Second, take a look at Chapter 2 in the UCCX 7.0 install guide (uccx70ig). Specifically page 2-4. This will provide specifics on installing SQL 2000. Good luck with your project.

Similar Messages

  • Do we need to install SQL in UCCX standalone server

    Hi Team,
    I have a installation for UCCX ver 7.0.2 & Quality Manager 2.7.3
    I have installed the UCCX application which has its default SQL installed along with the CRS application installtion.
    Now I have also installed Quality Manager 2.7.3 with SQL 2005.
    I followed the guide for installation, I get sync error when logined to QM desktop Administration.
    I feel the Database of QM is not syned with UCCX.
    Do we have to install SQL separately on the UCCX server.  Please advice & how to go further.
    Highly appreciate if someone shares his expertise in this.
    Thanks,
    Oliver Rodrigues.

    Hi
    UCCX has SQL already installed, and it uses Windows Authentication by default.
    This means you have to follow the instruction manuals for AQM:
    1) Create a local user account on both the AQM and UCCX server with the same username and password
    2) On the UCCX server, grant the user access to the SQL DB
    3) On the AQM server, set the Sync service to run as the new user
    It's in the install guide, in the 'Setting Up NT Authentication for the Cisco Unified CC Database' section. Try following that and post back if you have further issues..
    Regards
    Aaron

  • Ordering, Installing and Configuring UCCX 7.0

    Hi
    I would appreciate guidance for the following tasks:
    1. Ordering a UCCX solution
    2. Installing UCCX
        2.1 Installation steps.
        2.2 What DVD's will come along with the server and what is the order to install all applications
    3. Configuring UCCX
        3.1 Integrating with Call Manager
        3.2 Configuring Agents
        3.3 Integrating with DB, Email, TTS servers
        3.4 Installing and using the Supervisor tool
        3.5 Generating reports
        3.6. Configuring a script using CSQ
        3.7. Recording Calls for Quality of service
    Thanks

    That's asking for a lot.  Cisco uses partners to sell and implement their solutions.  Have you looked into a partner for assistance in your project?

  • UCCX 8.5: first Node cable disconnect results

    After disconnecting the first Node network cable :
    - Forward busy/unregistered/failure triggers only after like 3-6 minutes. In the meantime we get silence.
    - CAD get unresponsive for about 2-6 minutes.
    - Agent can be place into ready after 2-6 minutes but the rest of the service don't workanother 3-5 minutes.
    - Sometimes CAD shows crazy messages like Jtapi error, user does not exist, etc for about 2-8 minutes.(clicking on OK will remove all errors eventually)
    NO FAILOVER MECHANISM WORKS DURING TRANSIENT (3 - 6 minutes)
    Any ideas?

    Hi Maxim,
    Page 39 of the below link states,
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/installation/guide/cad85ccxig-cm.pdf
    Privileges:
    By default, Windows Installer installations run in the context of the logged-on user. CAD installations, which use Windows Installer, require either administrative or elevated (system) privileges. If the CAD installation is run in the context of an administrative account, no additional privileges are required.
    You can also cross verify is the CAD has been installed after the UCCX HA setup is completetd, by running the
    PostInstall.exe from the path C:\Program Files\Cisco\Desktop\bin in the CAD\CSD boxes. If you dont find the second node ip address, please enter it here.
    And check the behaviour.
    Hope it helps,
    Anand

  • UCCX and CUCM issue

    Hi,
    I integrated UCCX 8.5 and CUCM 8.5 in a lab setup using VMware.
    Created CTI ports and then some applications including AA application. But when calling from my soft phone to the Trigger, its getting disconnected after 5 seconds. I am not able to hear the prompt also.
    Checked and started all the services and resynced all the applications and finally installed CUCM and UCCX again but still the same issue is happening.
    Please give some valuable inputs.
    Regards..

    Hi
    You should probably try a debug of the script. Run Script Editor and make sure you log in. The do Debug/Reactive Script, and enter SSCRIPT[aa.aef] in the top box, and 60 in the bottom box.
    Then dial the AA.
    One of several things should happen:
    1) Nothing at all - in this case the system can't run the AA script, and you'll have to look at the logs to find out why.
    2) The script will appear, and you can step through it by pressing F10 and see what the script does in real time. As you step through the steps, if you go past a Play Prompt and still get silence, then it might reach a point where it decides you aren't responding and hangs up on you
    3) You might get an error in the script
    Report back what happens...
    Also:
    1) What language configuration do you have on the system?
    2) If you press the ? key on a 79xx twice quicky during the 5 second call, do you see rx packets increasing?
    Aaron

  • UCCX 7 to UCCX 8 Upgrade Questions

    Dear All
    I have three questions regarding upgrade from UCCX 7 to UCCX 8:
    1-Can I upgrade from UCCX 7 single node to UCCX 8 HA?
    The Document said that I have to Run PUT Tool while both UCCX 7 servers are running but in my case i have only on UCCX 7 Server where I will Install PUT on it and Take PUT Backup then Restore Backup on 2 Server UCCX 8 (HA). Does anyone know if this can be done and if yes does the process as follow:
    a) Install PUT on UCCX 7.
    b) Take PUT Backup of UCCX 7 single Server.
    c) Install UCCX 8 PUB and restore PUT Backup on it.
    d) Install UCCX 8 SUB by choosing First Node:No, then Run Initial Wizard then select Cluster Server IP Add of UCCX 8 PUB.
    2-Do I have to do anymore configurtion if I will change IP Address of UCCX 7 so that new UCCX 8 Server will have different IP Address.
    My guess is that will not need anymore configuration.
    3-After Upgrade UCCX 8 from UCCX 7, do i have to Insatll new CAD 8 manually on all Agent PC one by one or not ?
    Thanks for your support.

    Hi Ayman,
    The CAD client will be updated automatically when the agents login after the upgrade.  They will need to have admin rights on their PC for this upgrade to complete.
    The second node can be added after the upgrade on the first node has been completed.
    I recommend changing the IP address only after the upgrade has been completed and the cluster is stable.  The exact steps are found in the 8.0 Admin Guide.  There is a "Readiness Check" here to make sure the change won't cause any problems.  It's important to note that the hostname cannot be changed.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_0/configuration/guide/uccx801ag.pdf
    -Brendan

  • Restore UCCX without CallManager on network

    I am attempting to create a test install of my UCCX Expres 7.0(1) SR4.
    I have gotten the software installed to my server, and am attempting the restore.  However, the restore fails, because the new test server is NOT on the production network (which has CallManager).
    Is it possible to restore UCCX data WITHOUT having a connection to CallManager available from the new server?
    Thanks!

    Hi,
    For both backup and restore the Call manager needs to be up and running and uccx should be able to reach CUCM.
    If not, you can run into bigs like this below.
    CSCsl87631    Unable  to contact Call Manager. PERMISSION_DENIED_ERROR: 1219
    CSCsi10073    Restore  fails Call Manager Not in the Network
    So, its very necessary for CM to be on the network.
    Thanks
    Ankita

  • Error during installation when add HA server to UCCX

    Hello all,
    I am having issues adding an HA server to a UCCX cluster.  During the installation of the HA server i get the following error
    "Configuration validation with uccxsvr01 failed Configured first node uccxsvr01 is not a first node -is uccxsvr01 entered correctly?
    -is uccxsvr01 the correct first node for this node"
    I have verified the security password, ip address of node 1, hostname of node1
    I have rebooted as well.
    The server is licensed for HA
    the HA server is listed under System and servers in Node 1
    Anyone ever run into this?
    We are running UCCX 10.6.1.10000-39

    Hi kwaldecker@netd...,
     ok.
     If you open the RTMT, is there any alert in Node 1?
     If there is no alert, are you able to make the test bellow?
    a) Backup Node 1.
    b) Shut down Node 1 (it's just a 'Power off' of the VM)
    c) Install a new UCCX in your VM with the same hostname/IP Addr of Node 1.
    d) Install Node 2.
    Note: if you are able to install Node 2 ... Restore the backup in the 'New Node 1' and install Node 2 again.
    Regards.

  • UCCX Recordings are Slow and Distorted

    I have just replaced an IPCC 3.5  server with a brand new UCCX 7.1 server.  As with the 3.5 server, I used  a workflow to force UCCX to record all inbound calls to the helpdesk  queue.  Unfortunately, all of the recording sound like they're being  recorded at 60-70% speed and are highly garbled(I have checked this both  through the supervisor's desktop which are reading the RAW files and by  exporting/listening to the WAV files directly) .  My first inclination  was that it was a SPAN issue with duplicate packets but I don't know how  that could be since we simply swapped out the servers.  None of the  network equipment or configuration was changed.  CUCM was also upgraded  at the same time but that shouldn't affect the recordings.  I have  Wireshark installed on the UCCX server and when I watch the monitoring  NIC on the UCCX server, I receive no duplicate packets.  If I decode the  RTP streams and have Wireshark play it back, it comes through clear  with no speed or distortion issues.   Anyone have any other ideas why  this might be happening?
    Thanks,
    Kyle

    It turns out that I was receiving SPAN RTP streams on the monitoring NIC and also receiving the recordings dictated by the Workflow on the primary NIC.  Since Wireshark was only watching the mornitoring NIC, I saw only one stream, but UCCX was taking the stream from each NIC and combining them before writing to the RAW file.  As soon as I turned off one option (I chose to kill the SPAN) everything started recording clearly.

  • UCCX 10.5 VMtools

    Hello,
    I recently upgraded UCCX from 8.5 to 10.5 and am having trouble installing VMtools.   Reading the instructions on the Cisco's Docwiki, it looks like I am supposed to use method 2
    http://docwiki.cisco.com/wiki/VMware_Tools
    I have tried per the instructions and the old VMtools were uninstalled and UCCX rebooted but the new tools did not get installed nor did UCCX reboot a 2nd time.   I can only assume I'm missing a step somewhere.
    When I click install VMtools in VSphere and choose interactive, it is my understanding that this mounts the CD drive so the tools can be installed.
     Where should my CD drive for my UCCX guest be pointed before clicking install VMtools?
    Do the tools get installed from the existing ESXi installation or do I need to have an ESXi ISO with tools included that I need to point my CD drive to?   I've read conflicting information about this.
    Thanks in advance for the help,
    Glenn

    It's super simple and I've done it a number of times, the most recent was last week.  If it's failing on you, it's not likely your fault, rather a fault of the upgrade process which you'll likely get the run around between Cisco and VMWare support.
    1. Your understanding is correct.
    2. No where, anywhere, it doesn't matter really, because the vmtools CD will be mounted regardless
    3. ESXi is bundled with the proper vmtools version and therefore you don't need to do anything extra
    Whether or not your UCCX rebooted once or twice is probably less important to the fact that it failed to upgrade.  What I mean is, if it rebooted once and still upgraded, I wouldn't worry about it rebooting a second time a few days later.  It's either going to reboot once or twice right now, or not.

  • UCCX 7.x SQL Backend

    Will UCCX 7.x support a backend SQL model where the database components are running on a Enterprise backend SQL server? Also, can UCCX 7.x run in a VMware ESXi environment?

    Hi,
    Unfortunately, the answer to both is no. This type of configuration will not be supported by TAC. The database components must be installed on the UCCX box with the provide MSSQL Media.
    There will be support for all voice applications in VMWare in later versions, they are undergoing certification for VMWare in the development labs until then.

  • UCCX 7.01 hangs after "Please wait while System Parameters are saved"

    Have a new system, here is the order in which I completed the steps:
    OS disk
    OS Patches
    installed CRS
    Installed SQL
    installed SR5
    OS patches again
    initial config
    When going through the initial configuration I get to enter the information for HR Sessions and Codec and it tells me "Please wait while System Parameters are saved".  After a few minutes it refreshes to a blank page and the system is not configured.
    Any suggestions would be appreciated.
    Thanks!

    Rebuilt the damned thing and started from Scratch.  (Need to add to the release notes “UCCX server must be rebuilt a minimum of 3 times” as it seems this always happens.)  After this things are happy.  I did see a differnent set of screens during the initial configuration but wasn't smart enough to document them.
    1.       Installed OS
    2.       Installed UCCX 7.01
    3.       Installed SQL for UCCX 7
    4.       Ran Initial Configuration
    5.       Installed SR5 for UCCX 7
    6.       Installed OS updates 3002.1.5aSR9

  • Switch version fail. CCX 8.5.1SU4 - 9.0.2

    Hey All.
    When i try to switch-version from version 8.5.1su4 to 9.0.2 then after app. 30 min, the cli says "Sync after switch version failed" and then stops.
    I have tried to reinstall the 9.02 on the inactive partion, but still the same issue. all network connectivity (DNs, NTP etc.) is running så they should not be any network issue that causes this.
    I have also tried to force a switch-version thru the recovery CD, and the swtich version goes ok, and the 9.02 comes up, but no services will start (Waited 45 min - and monitor the utils services list on the console)... so im back on 8.51su4.
    Installation is on vmware version 5.0 and is SA
    On the console, i can se 1 error in the startup,
    But the interface is actually answering from remote.
    Anyone have any idea what i could be??
    (the refresh file was install before the the upgrade file...)
    Best Regards
    Thomas Johannesen

    Hey Aaron
    Here is the log files.
    As i can se in the files it comes with this error :
    WARNING: server initialization failed, or possibly timed out (if -w was used).
    Check the message log, online.log, for errors.
    2013-01-28 12:40:30,501 - uccxdb.util - CRITICAL - Error in executing the cmd [su -c 'source /opt/cisco/uccx/bin/uccx_ids.env ; oninit -wyv' informix], retCode [1]
    Mon Jan 28 12:40:30 CET 2013 :: Error while installing files for UCCX DB instance
    Mon Jan 28 12:40:30 CET 2013 :: -------------------------------------------------------------------
    Mon Jan 28 12:40:30 CET 2013 :: Moving sysadmin db to sadmin dbspace
    Mon Jan 28 12:40:30 CET 2013 :: sadmin_exist 2
    Mon Jan 28 12:40:30 CET 2013 :: Moving sysadmin database
    1809: Server rejected the connection.
    Mon Jan 28 12:41:00 CET 2013 :: Error moving sysadmin DB
    Mon Jan 28 12:41:00 CET 2013 :: Stopping DB
    Mon Jan 28 12:41:00 CET 2013 :: ------Stopping uccx database-------
    Mon Jan 28 12:41:05 CET 2013 :: Waiting for port to be released
    Mon Jan 28 12:41:05 CET 2013 :: The port is released
    Mon Jan 28 12:41:05 CET 2013 :: ------UCCX database stopped--------
    Mon Jan 28 12:41:05 CET 2013 :: DB upgrade script failed
    Mon Jan 28 12:41:05 CET 2013 :: Restoring repicaition status of the databse
    At least two servers must be defined for replication.
    The requested operation will not be performed.
    Mon Jan 28 12:41:05 CET 2013 :: ./uccx_sv_db.sh 8.5.1.11004-25 9.0.2.10000-71 8.5.1.11004 rpmdb: Program version 4.2 doesn't match environment version error: db4 error(22) from dbenv->open: Invalid argument error: cannot open Packages index using db3 - Invalid argument (22) error: cannot open Packages database in /partB/var/lib/rpm package UCCX02_lib is not installed /var/log/active/platform/log/cli.log
    Script uccx_sv_db.sh failed with exit code 255.
    in the uccx_install.log file. and after that i runs the rollback script.
    Have no idea why this error is showing.
    Best regards
    Thomas

  • Wall Board Issues

    I posted this to an older thread but haven't recieved any response...I am starting a new thread to see if someone can help me out.
    I am trying to get this working,  but I am runnning into some issues.  Enterprise manager is not installed  on the uccx server.  I do have access to it from another installation  but I can't get connected (Domain's aren't the same) and I don't know  the sa password.  How can I get this resovled?
    Thanks,
    Joe    

    Just to be clear the inital QueueStats page displays with the ResourceGroup and changes colors if their is a call in the Queue.
    I am using Windows Authentication, logged in as CiscoWbUsr.  If I look @ the database db_cra, CiscoWbUser is a role member of db_wallboard_read and public.  db_wallboard_read has Select permissions for RTCSQsSummary but not for "Resource".  Is the wallboard.asp file using a table that the CiscoWbUser doesn't have access to?  The statement:
    strSQL = "SELECT x.resourceName, t.eventType, x.datetime FROM (SELECT t1.resourceID, t1.resourceName, MAX(t2.eventDateTime) AS datetime FROM Resource AS t1 INNER JOIN AgentStateDetail AS t2 ON t2.agentID = t1.resourceID GROUP BY t1.resourceID, t1.resourceName ) AS x INNER JOIN AgentStateDetail AS t ON t.agentID = x.resourceID AND t.eventDateTime = x.datetime ORDER BY x.resourceName"
    If I run the above in query analyzer I get a permission denied, which I expect since CiscoWbUser doesn't have rights to that table.
    If I run the portion of the script that QueueStats:
      strsql = "SELECT CSQName, loggedInAgents, availableAgents, callsWaiting, callsHandled, totalCalls, callsAbandoned, convLongestWaitDuration, endDateTime FROM RtCSQsSummary ORDER BY CSQName"
    I get results that I would expect.
    What tables should the CiscoWbUsr have access to?
    Thanks,
    Joe

  • Failure starting a script in uccx9

    Hi
    I am installing a new uccx based in a copy of the customer with a version 6. All have been copied, CTI RP are registered in CCM, application mgmt, prompts and scripts are uploaded yet in uccx9 and agents are logged in EM.
    The script is for a contact center, a call enter to contact center, look for a free agent logged and send the call, when i call to the dn trigger, enter the call to the agent but agent (in my Pc i am testing) can not respond the call, only see the ANI and DNIS and i ear a system prompt "we are sorry the system is not responding..."
    I checked in service parameters "user prompts overrides system prompts" be in enable.
    What other things could i check?
    Thanks!!

    Hi Anthoni
    Thank for your reply, i have checked what you said and is ok, CSS selected is for national calls, including internal, and partition are all dn in the same, internal DN.
    Probing other scripts i see a similar problem, enter the user prompt, and after it the same system prompt "system is not responding...." script can not launch dn of the agents.
    Any idea?
    Thanks!!

Maybe you are looking for