Installing Windoze 7 Pro and Office Via Bootcamp

Getting ready to install the above and had 2 questions for anyone with experience:
1: Any merits/cons to installing 64 bit vs 32 bit versions of both and,
2: Recommended partition space given currently used of 170 GB for OSX 10.6.8 with 830 GB remaining?  Intended apps are commodities futures trading platform (NONE support OSX even for a $374B company...), radar detector software, Quicken, and maybe a few others; NO gaming.
Any advise suggested before I take the plunge...

Repartitioning is possible and easier with third party tools.  But yes, it is a hassle.  Go ahead with 100GB.
I'm not sure what needs you have that make virtualization with Parallels or Fusion not practical.  I understand that customer support for Parallels may be an issue, but regarding performance, giving a properly configured virtual machine, using non-gaming, non-graphics intensive, "basic" apps can and often will be usable.  For example, most people make the mistake of allocating more than one virtual CPU to the virtual machine "because I have a dual core CPU."  But actually, most basic apps do not need more than one CPU, and so allocating just one CPU in the virtual machine avoids CPU scheduling issues.
And since you're basically running multiple OS' simultaneously, then you need enough RAM for the total of all the OS'.  (e.g.: if you want to run Windows7 and Windows Server 2008 virtual machines at the same time, you'll probably need 6GB or more of RAM on the Mac. 2GB for Win7, 2GB for Win2008, 2GB for OSX & Fusion.)  So with 4GB of RAM on the Mac, configure the virtual machine with 1vCPU, and 1.5-2GB of RAM.  But realize that with just 4GB of RAM, you've probably used all your RAM so you probably won't be able to have Safari, Chrome, Mail, iCal and iTunes open on the Mac while the virtual machine is running.
Me personally, I use Fusion extensively on a 4GB Core2Duo Macbook Pro.  It is what I tested Vista and Win7 along with Office 2007 and 2010 and various versions of Quicken for Windows.  As long as I didn't run too much on the Mac side, the virtual machine ran fine.  A virtual machine will never have as good graphical performance as running physically like in Boot Camp.  But not having to reboot out of OSX is why I'll continue to use Fusion.
For more info:
Choosing the Right Virtual Machine Settings
Frequently Asked Questions about VMware Fusion (Avout halfway down, the section on Virtual Hardware)
(While it is for Fusion, the overal concepts will hold for virtualization in general.)

Similar Messages

  • I have an I Mac june 2009 24" type 9.1 can I install win 7 pro 64 bit via bootcamp?

    I had Win XP servicepack 3 installed via bootcamp. Recent OSX updates changed bootcamp and it supports now only Win 7.
    I was not informed about this change.
    So to be able to use my Win XP applications again I bought Win 7 Pro 64 bit OEM.
    The Cd wil work until I have to install and format the new ceated partition.
    I cannot choose between FAT or NTFS the installation continues and Woindows will be unpacked.
    The counter remains on (0)
    Nothing happens further
    What is wrong?
    PLS somebody with a solution?

    Has Apple the right to claim what  an  owner  of an IMac may run on his computer and wat not?
    Do we live in the  former Sovjet Union?

  • I need to install windows 7 on my iMac (via bootcamp), should i stall 32-bit or 64-bit option?

    I need to install windows 7 on my iMac (via bootcamp), should i stall 32-bit or 64-bit option?
    Thanks

    If your system is Core2Duo or better, use 64-bit.  32-bit only sees 3.5 GB RAM max.  64-bit Home sees 16 GB RAM max, and 64-bit Pro sees 192 GB RAM max.

  • Is it OK to install both Logic Pro and Logic Express on my computer?

    Is it OK to install both Logic Pro and Logic Express on my computer?
    I use Logic to perform live, but i only have 2 USB drives on my computer, and i use them during my performances, one for my keyboard, and one for my audio interface...........therefore, i dont have room to plug in the "node key" in order to use Logic Pro.
    So is it ok for me to have Logic Express installed, too?? This way, I dont need to plug in the "node key" (or whatever it's called).
    I know i can buy a USB hub, but i cant afford one right now.
    Thanks, daddies!
    www.myspace.com/johnnydepth

    I installed both on my PB 12" - no problem at all
    cheers!

  • Acrobat 9.0 Pro and Office 2008 updates download but won't install

    I hope I'm not alone experiencing the following difficulties installing third party patches and updates and that someone who reads this may recognize the problem…and its solution. I've run Adobe Updater (6?) for CS4 Design Standard which includes Acrobat 9.0 Professional, and subsequently, Microsoft Autoupdate for Office 2008 v12.0.1, but find that neither will install the downloaded updates which disappear immediately after an (unsuccessful) installation attempt.
    Disk space is not a problem (500GB HD) nor is memory (4GB RAM); I'm using OS 10.6.4 (10F569) which is the most current set of OS updates I can locate. I had successfully been running CS4 with Adobe's most recent patches (e.g. P'Shop 11.0.2 and Acrobat 9.3.3) until the 9.3.4 patch failed to install with the message that +"Safari and Acrobat apps must be closed in order to proceed"+—they were closed as was everything else that wasn't essential according to a check of the Acitivity Window. A grab of the alert panel reads:
    +"AcroProUPd934_all Update Failed: The Patch has failed because the application has been modified since it was originally installed (for example, plug-ins may have been disabled). Please go to the Adobe support website for more information regarding how to re-enable disabled components prior to installing the patch, or you can uninstall and reinstall the application, and then reinstall the patch."+
    Of course, uninstalling CS4 and reinstalling the entire suite of apps reverts all of them to their original versions, now none of them will accept an update…whether manually downloaded and fed to it or by using Adobe's most recent AutoUpdater. The most consistent message is an alert panel stating that in order to continue, Safari and Acrobat applications must be closed—which they are.
    Not surprisingly, after nearly 8 hours on a cell phone with Adobe Tech Support in Delhi, 5 different techs and a manager, the case remains open a week later; it seems +"no one has ever seen or heard of this problem before"+ and an overly apologetic manager could only repeat +"it's [Adobe] policy to remove all copies of CS4 from existence once CS5 is introduced."+ While we waited for 500MB of updates to download more than once, a helpful tech suggested I'd have more luck finding a used copy of CS4 on the net than getting a link to another download from Adobe.
    With regard to Microsoft Office 2008, I'd been running v12.0.1 and the MS Autoupdate app has tried to download and install v12.1.0 (and those which follow) but when installation is attempted, an alert panel reads:
    +"There is a problem with the Office database. Office might be unable to access the data base or the database file might be damaged. Without the database, you might be unable to use the Address Book, Scrapbook, and other features that store your personal information. To rebuild the database, Open Microsoft Office 2008/Office, and then open the Microsoft Database Utility. For more information, open the Database Utility application, and on the Help menu, click Database Utility Help."+
    All attempts to rebuild the database fail, noting…
    +ERROR: Failed to open database [Head]+
    +ERROR: Corruption opening database [16003:""]+
    ======================
    +Scan Ended+
    ====================
    Two hours on the phone with a relentlessly pleasant Nova Scotian tech for Microsoft revealed little but the suggestion that +"the app doesn't seem to be able to recognize your hard drive. I've never seen this problem before."+
    With luck, perhaps someone reading this far recognizes the issue and can offer a solution? It will be gratefully received! Thanks,
    David

    Disk space is not a problem (500GB HD)
    How much space is available out of the 500GB?
    Have you tried any of the following:
    Disconnect all peripherals from your computer. Boot from your install disc & run _*Repair Disk*_ from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select *Disk Utility.*
    Select the disk or volume in the list of disks and volumes, and then click *First Aid.*
    Click _*Repair Disk.*_
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and try the installations again.

  • Error installing MS Project Pro for Office 365

    I have paid for a subscription to MS Project Pro for Office 365, however, when I try to install the product I am getting an Error 3-4 "Something went wrong". 
    I have a feeling that it has something to do with the fact that I have Office 365 already installed.
    I have tried stopping my AV and the Firewall (as suggested on the related error page (which pops up from the URL presented on the Error Box.
    Help?!

    Gerald,
    I have gone back and installed project pro for Office 365 on a number of machines that already had O365 so that should not cause you any issues.  Sometimes repairing the exisiting office, then try the install again fixes the issue.
    I would second the install all critical updates and reboot, that tends to solve a lot of issues.
    Cheers,
    Curt Winter
    Certified Microsoft Professional
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied. If you found my post helpful, please mark it as the answer.

  • Acrobat 8 Pro and Office 2007 Problem

    I posted this in the CS3 forum originally. They told me to post here too.
    Issue:
    When logged in as a local user (no admin rights) Word 2007 will crash the whole computer when you type a key.
    The reason I am posting on Adobe forums is that this only happens when CS3 is installed as well on the same computer.
    Troubleshooting:
    Both products work fine as a local user account, if only one or the other are installed.
    During login, Acrobat Pro will display a MSI/Installer progress bar for about 30secs. After I updated Acrobat to 8.1.3, that stops, but the Word crashing problem doesn't.
    When starting Office, setup runs everytime. It shows just a progress bar and goes for about 1min.
    On a doc, if I wait about 5min and don't do anything. A MSI install progress bar will run for "MS Office 2007 Pro", this will re-spawn for several mins. until it finally stops. After that, Word IS usable.
    No other problems with CS3.
    Fully updated both CS3 and Office 2007
    This could very well be an Office issue, but it is associated with CS3 also being installed on the same computer.
    Any help would be great!

    Forgot again! Using XP Pro sp2 and sp3.

  • I have just bought and installed adobe acrobat pro and got the serial number too, why do you ask for

    I have just bought and installed adobe acroba
    t pro and got the serial number, but now the system k
    eep asking me for an old serial number from my former version.
    During the years I have reached vesion 9, but I don't have any old serial number.
    What to be done?

    you got a discount because you bought an upgrade version. it needs proof that you own a previous version. more info can be had if you post in the correct acrobat forum. this forum is for questions and comments about the workings (or not as the case may be) of the forums themselves.
    http://forums.adobe.com/community/acrobat

  • Icloud doesn't work after a clean install of windows 8 pro and office 2010

    After installing the  'iCloud Control Panel for Windows v2.0' on my cleanly built laptop. I now getting the following error after activation the mail option under the iCloud Control Panel 'Setup can't Continue Because Outlook isn't configured to have a default profile. Check your Outlook settings and try again'..
    I have done this add also added a second email address and change the new email address to be the default email address.
    I've also done the following as well....
    Ideally the error message you have mentioned is related to iCloud. But you may try these steps as you have already tried re-installing the iCloud control panel and sign in back to sync with Outlook:
    Check if there is any new updated version of iCloud released for Windows 8.
    1. Sign out from iCloud control Panel.
    2. Go to Outlook -> Click on File -> Options -> Add-ins.
    3. Select Com Add-ins in Manage -> Click on GO.
    4. Disable all the Add-ins -> Click OK to save the settings.
    Now go to iCloud Control panel and sign into the iCloud account. Open Outlook and check if you are able to sync.
    however the same original error still accures. can i also point out i have delete the all the os and applications and started again by rebuilding the os windows 8 pro but this time using ms office 2013 and the error 'Setup can't Continue Because Outlook isn't configured to have a default profile. Check your Outlook settings and try again' happens again als did option 1-4 from above as well and the error still happens.
    Any Idea's?

    Windows 8 is not supported on Boot Camp, that may or may not be part of your issue but it makes troubleshooting difficult. Post in Microsofts forums as well, that error message is not limited to Boot Camp installations, regular Windows users also get it.

  • Can I re-install Acrobat X Pro and somehow reduce the size of the program? 6 GB is HUGE!

    My installed Adobe Acrobat X Pro is ~6 GB (according to Windows program manager). I can't justify that space. Is this necessary?
    I really only need it to combine/rearrange/modify PDF presentations. Is there a way to install a smaller set of functionality?

    Hi Ashley Clavette,
    The Initial view setting works perfectly when the file is opened in Acrobat after setting the desired Initial View.
    When you upload the file onto Wordpress, and view it on that website in the browser...it might be using a different pdf handler program which might be causing this issue ( it would be helpful, if you could provide the screenshot) , however when you download the pdf again from wordpress server...and open in Acrobat/Reader...then what  exactly happens ?  Does the pdf opens in the desired Initial View setting?
    Rahul

  • Acrobat 9 Pro and Office 2007 - Incompatibility??

    I have been reading comments on other forums about a compatibility issues between these two softwares. See Amazon product feedback reviews on Acrobat 9 Pro for example.
    Is this a issue users here are experiencing?.

    Some of what I saw was someone coming to AA9 from AA5. For OFFICE 2007 he had no choice if he wanted the PDF Maker functionality. There is likely an issue, possibly with either AA9 or OFFICE not being updated. Being sure you are up to date is important. Currently AA9 appears to have no updates, only an add-on. However, it may be that OFFICE 2007 has updates, in fact likely. The bottom line is that the complaints did not provide enough information to see if it was an AA9 problem, MS problem, or a user problem. Enough folks seem to have survived the transition successfully, it is a good chance that the latter problem may be the issue in that forum.
    The comment on support is not new in concept. That has been a complaint for as long as I can remember with past versions too. I think it was with AA5 that I started coming to the forum, and that was the move that saved me a lot of time and frustration (other than I now spend a lot of time on the forum).
    For comments about compatibility, I would search this forum and see what others have had problems with and the solutions that have been suggested. I think you will get a much better feel for the compatibility. Two of the comments on the link praised the software.

  • Batch Processing .doc 2 .pdf with Acrobat 8 Pro and Office 2004 on Tiger

    I have been through the forum posts and for each relavent thread there is the easy batch process that can be done to solve this issue - however, the major flaw I have is (as seen in the attachment) no option to be able to open Word docs. How do I enable Acrobat Pro to be able to open word docs??!?!? It really is an answer I have not been able to find on the web anywhere!

    Then what do you make of this persons post: http://forums.adobe.com/message/1098036#1098036
    "Create a new batch sequence. Select 'Run commands on Selected Folder'. In the source file options enable 'Microsoft Office Word'. Then let run the sequence."
    I am able to work out the whole process except in my Acrobat there is no option for "Microsoft Word" as Bernd suggests - how do I get it on the list.

  • MacBook Pro and Office Trial.

    The 28 day trial on my NEW MacBook Pro expired yesterday. On boot this morning, the whole suite has gone, along with most of my files, all of my music and programs I've paid good money for. Every program installed that didnt go are back to day 1 defaults, all my (important) e-mails...gone. All the Airport settings wiped and the dock bar locked open with the minimum of Tigers default programs. My 250GB drive (ex PC FAT) has been corrupted so all the data on that is no longer accessable.
    Anybody know what the **** happened here ???
    MacBook Pro   Mac OS X (10.4.6)  

    No, I don't have a back-up of TIme Machine... to tell you the truth, I have this computer for a few years now and I still don't know how to work all of the apps that are here. Anything else I can do?

  • Installed final cut pro and now i cant access software

    i just purchased this mac pro 2 x 2.66GHz 6-core intel Xeon 12 cores 16gb 1333MHz DDR3 8TB of memory also final cut studio 7 the software installed this software as soon as i set this system up and now i am trying to access this software
    and
    now my system requires a QUARTZ EXTREME CAPABLE VIDEO CARD what gives here the system was configured for this software and now it doesn't allow me to open the program

    nevermind found the answer, its an issue with this new system

  • Compatibility: Project 2013 Pro and Office 2010 Pro Plus

    Beyond an obvious recommendation to upgrade Office (which cannot happen in this instance), is the shared code base between Office and Project the same or close enough to avoid performance or functionality issues that would not be experience if Office 2010
    Pro Plus and Project 2010 Pro?

    Hello,
    For Project Server 2013 you will need Project Pro 2013 but the rest of Office can be 2010.
    Paul
    Paul Mather | Twitter |
    http://pwmather.wordpress.com | CPS

Maybe you are looking for

  • How to get The Collbration Admin menu in EP of  Netweaver

    Hi All, Please Any one can tell me how to get  Collabration Admin menu in Netweaver like How we get System Administration , Content Administration and User Administration I want to create E-Mail Transport in the Groupware Admin Document they have giv

  • Trying to understand the need for typecasting

    Can someone explain why there is a need to typecast in the getObject() method? Thank you, public abstract class GenericTest<T extends GenericTest>     public GenericTest()     public void getObject()         T objectOne = getObjectCast();         T o

  • Why does TextEdit keep loosing what I typed?

    I just lost a whole hours worth of research. I was typing in text edit and then it started making me duplicate the file at every save and then I had to replace the orginal, and I did this several times until I finally decided to close it down (as it'

  • .dsstore keeping me from copying files

    I am trying to copy files from one external drive to another. The Copy process gets almost to the end and then I get a message saying The operation cannot be completed because there is already a .dsstore file (not exact words). What causes this and h

  • Change pages

    Hi to all, I'm developing a project which is made of many different pages (now there are 30 pages, but I'm planning to add some other); I created a different VI for every page, and a Main VI to launch the correct page (see attached). When I reload a