Icloud doesn't work after a clean install of windows 8 pro and office 2010

After installing the 'iCloud Control Panel for Windows v2.0' on my cleanly built laptop. I now getting the following error after activation the mail option under the iCloud Control Panel 'Setup can't Continue Because Outlook isn't configured to have a default profile. Check your Outlook settings and try again'..
I have done this add also added a second email address and change the new email address to be the default email address.
I've also done the following as well....
Ideally the error message you have mentioned is related to iCloud. But you may try these steps as you have already tried re-installing the iCloud control panel and sign in back to sync with Outlook:
Check if there is any new updated version of iCloud released for Windows 8.
1. Sign out from iCloud control Panel.
2. Go to Outlook -> Click on File -> Options -> Add-ins.
3. Select Com Add-ins in Manage -> Click on GO.
4. Disable all the Add-ins -> Click OK to save the settings.
Now go to iCloud Control panel and sign into the iCloud account. Open Outlook and check if you are able to sync.
however the same original error still accures. can i also point out i have delete the all the os and applications and started again by rebuilding the os windows 8 pro but this time using ms office 2013 and the error 'Setup can't Continue Because Outlook isn't configured to have a default profile. Check your Outlook settings and try again' happens again als did option 1-4 from above as well and the error still happens.
Any Idea's?

Windows 8 is not supported on Boot Camp, that may or may not be part of your issue but it makes troubleshooting difficult. Post in Microsofts forums as well, that error message is not limited to Boot Camp installations, regular Windows users also get it.

Similar Messages

I have a new PC laptop with Windows 7 and Office 2010. I have an Airport Extreme, and installed Bonjour on my laptop. Bonjour "sees" my printer. When I try to print, the printer lights up -- but doesn't print. anyone have an idea? Thanks Gregg

I have a new PC laptop with Windows 7 and Office 2010. I have an Airport Extreme, and installed Bonjour on my laptop. Bonjour "sees" my printer. When I try to print, the printer lights up -- but doesn't print. anyone have an idea? Thanks Gregg

Hi Kelly,
As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
I would suggest that you troubleshoot using the steps in this article -
OS X Yosemite: Printing troubleshooting
Start with the section titled Check the network.
Thanks for using Apple Support Communities.
Sincerely,
Brett L

Screen brightness OSD not working after 7 clean install

Hi all,
I just did a clean install of Windows 7 on my T400. Initially, none of the OSDs were working (volume, led light, screen brightness). But, I found this thread--http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/On-Screen-Display-feature-no-longer-works-i...--and downloaded the Hotkey drivers. This brought back the volume and led OSDs, but not brightness. Additionally, for some reason now the screen does not get nearly as dim as it used to.
Am I missing something obvious? Thanks!
Solved!
Go to Solution.

Fantastic. FIxed the problem. Thanks so much for your help!

Ihave downloaded iCloud to my new PC and am using windows 7 and office 2010. I cannot get iCloud to come up on Outlook with the choices for CalendCar and contacrts, my iMail account is there, but not the general coud choices. What am I doing wrong.

I have downloaded iCloud to my new PC and am using Windows 7 and Offie 2010. I cannot get iCloud to come up on Outlook with the choices for Calendar and Contacts, my iMail accnt is there***.me.com, but not the general Cloud choices for calendar and contacts? What am I doing wrong?

I have I cloud 2.0.2.187 loaded just downloaded yesterday.

Macbook doesn't work after trying to install yosemite

Hello to everyone,
I have a macbook pro 13 8gb RAM and i7.
I had a problem before installing yosemite, when I switched it off it was always spinning the circle without really shutting down.
So I decided to create a USB driver with diskmaker x with on it Yosemite.
To install it with a clean way so I pressed alt while I was switching it on and I went in disk utility I initialized the Hard disk (750GB) and then I setted as reboot disk the yosemite usb driver... while it was running it I saw some interferences on the logo white page (like thin lines blue and red green..) so I switched it off I tried again and it said to me after a while impossible installing yosemite file system verify or repair failed.
So I tried to initialized the main hard disk again repair it and downloading yosemite via wifi...
An error occured and I saw the folder with " ? "...
Now I tried to start it but it doesn't work, I select the hard drive, I don't see disk utility anymore and once I select the hard disk it start a page and it stucks on the page with apple logo and the bar under it which is incredible slow to advance...
What can I do?
Many thanks

hi ariell!
yes, after i click on the icon the hour glass shows up. and yes i have norton anti virus
okay, if you've got Norton Internet Security 2005 (it's the firewall that we're interested in, rather than the antivirus), let's try giving the trusty Lorraine M technique a whirl:
Lorraine M: NIS/itunes problem rectified
love, b

Adobe CS doesn't launch after OSX clean install

My Mac had been having various small problems recently and it was becoming very slow. I decided to back-up all my work and perform a clean install of OSX 10.3.
The installation was successful, and I proceeded to install all my applications including Microsoft Office, Adobe CS1, Corel Painter, etc. and I also purchased Extensis Suitcase Fusion on-line.
Everything works fine and my Mac is noticeably faster, except for Adobe CS1. PhotoShop, Illustrator and InDesign will not launch. PhotoShop doesn't even get as far as the splash screen and quits without even an error message. Illustrator and InDesign also quit before they've fully launched, but with those apps I do get the message which pops up saying that the application has unexpectedly quit.
I've not loaded any fonts apart from the default system fonts which were installed with the OS. I've tried re-installing CS1. I've tried deleting the prefs for Adobe applications and also Suitcase Fusion. I've also tried repairing the disk permissions for my HD using Disk Utility. Finally I've run Disk Warrior on my HD, but none of these have helped.
If anyone has any suggestions please let me know. It looks like my only option is to re-install the Operating System again, but I'd like to avoid that if possible. Any advice appreciated!
800 MHz PowerPC G4 Mac OS X (10.3.9) 1.5 GB SDRAM

The odds of a corrupt font on a fresh install are small but the quitting seems like a font issue.
There is a scan program/option in Suitcase which checks for corrupted fonts.
Try running it.
You can also open Font Book and turn off fonts and try seeing if any of the fonts in your system are to blame. For this testing you will need to leave your mac on and test CS with fonts off. If you disable any of the system fonts you must re enable them befor shut down or you may not be able to restart.
Read this article on fonts before attempting the above trick. It might help to print it out.
http://discussions.apple.com/thread.jspa?threadID=122011&tstart=0

Satellite Pro L550 - WLAN doesn't work after new Installation Win 7/64 Pro

Hi,
I installed a real Win 7 / 64 professional full version on my Sat Pro L550-199, PSLW9E. Now I can't switch on my WLAN. The big FN-bottons doesn't exist. I tried lots of driver I found on the Toshiba Support page.
Whitch is the right, or is Win 7 / 64 professional not supported with WLAN?
How I can switch on WLAN without the FN-Key?
Lenny

Hi Lenny-27-7,
Is your WLAN card installed properly in device manager? It must be listed under network devices without yellow exclamation marks. So you can make sure that WLAN card is installed.
For all FN keys you have to install Value Added Package and Flash Cards Support Utility. Both tools can be downloaded on official Toshiba page where you can find the WLAN driver too:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
If you have installed everything you can start with WLAN configuration :)

Software Update doesn't work after new SSD install

I just installed a new SSD into my five year old MacBookPro (CoreDuo). I am taking the opportunity to reinstall from the ground up, getting rid of a lot of the cruft I've gathered over the years. I installed 10.6 fresh from the DVD and then ran software update. I could update iTunes, Airport, etc, but couldn't run the 10.6.6 combo updater. I was told that the file was corrupted during download and wouldn't expand.
I downloaded the standalone combo updater from the website and that worked fine. However, when I went to install the drivers for my printers via the System Preferences function, I get the same error. Is there a setting or something that I missed?

In 10.6.8 Apple won't allow Mac's to connect to WEP Encrypted networks, and won't reconnect to "hidden" networks automatically.
Use a Ethernet cable until you can change the WIFI
WiFi, Internet problems, possible solutions
WiFi security issues, at home and WiFi hotspots

SD card doesn't work after XP SP3 install on Satellite P10

I have a Satellite P10, which has a built in SD card reader. I got Windows XP SP3 from Microsoft update a few days ago, and suddenly the card reader couldn't see any SD card larger than 128MB. It was listed in device manager with a exclamation mark by it - and didn't show up as a removable drive in My Computer. Error message was "Device cannot start - Error Code 10"
I uninstalled SP3 , and it works again. I've tracked it down to this hotfix which is included in SP3:
http://support.microsoft.com/kb/934428/
If I install this on it's own I get the same symptoms, and uninstalling it cures it again.
So for the time being I can't install SP3. Does anybody know if it's possible to remove a single hotfix from a service pack?
thanks
Doug.

With a little help from MS support I've fixed this issue. In this hopes that it helps someone else, this is what I did.
1. Uninstall SP3, and reboot into SP2.
2. Copy the following files from c:\windows\system32\drivers to somewhere safe: sdbus.sys, sffdisk.sys, sffp_sd.sys. I put them on my desktop. They should all be version 6.0.4061.1
3. Install SP3, and reboot.
4. Shutdown, and restart using F8 to go into Safe Mode.
5. Log in as Administrator (or another account with admin rights)
6. In C:\windows\system32\drivers rename each of sdbus.sys, sffdisk.sys and sffp_sd.sys.to have a .old extension.
7. Copy the files you saved in step 2 to c:\windows\systems32\drivers
8. Shutdown and restart normally.
And that's it. Hope that helps.
regards
Doug.

Problems installing Adobe CS3 'Web Standard' after a clean install of Windows 8

When trying to re-install Adobe CS3 'Web Standard' Autoplay does not initiate install of application.

Well, does it launch manually? Win 8 suppresses auto-starts by default for "risky" files like installers...
Mylenium

Installing Windoze 7 Pro and Office Via Bootcamp

Getting ready to install the above and had 2 questions for anyone with experience:
1: Any merits/cons to installing 64 bit vs 32 bit versions of both and,
2: Recommended partition space given currently used of 170 GB for OSX 10.6.8 with 830 GB remaining? Intended apps are commodities futures trading platform (NONE support OSX even for a $374B company...), radar detector software, Quicken, and maybe a few others; NO gaming.
Any advise suggested before I take the plunge...

Repartitioning is possible and easier with third party tools. But yes, it is a hassle. Go ahead with 100GB.
I'm not sure what needs you have that make virtualization with Parallels or Fusion not practical. I understand that customer support for Parallels may be an issue, but regarding performance, giving a properly configured virtual machine, using non-gaming, non-graphics intensive, "basic" apps can and often will be usable. For example, most people make the mistake of allocating more than one virtual CPU to the virtual machine "because I have a dual core CPU." But actually, most basic apps do not need more than one CPU, and so allocating just one CPU in the virtual machine avoids CPU scheduling issues.
And since you're basically running multiple OS' simultaneously, then you need enough RAM for the total of all the OS'. (e.g.: if you want to run Windows7 and Windows Server 2008 virtual machines at the same time, you'll probably need 6GB or more of RAM on the Mac. 2GB for Win7, 2GB for Win2008, 2GB for OSX & Fusion.) So with 4GB of RAM on the Mac, configure the virtual machine with 1vCPU, and 1.5-2GB of RAM. But realize that with just 4GB of RAM, you've probably used all your RAM so you probably won't be able to have Safari, Chrome, Mail, iCal and iTunes open on the Mac while the virtual machine is running.
Me personally, I use Fusion extensively on a 4GB Core2Duo Macbook Pro. It is what I tested Vista and Win7 along with Office 2007 and 2010 and various versions of Quicken for Windows. As long as I didn't run too much on the Mac side, the virtual machine ran fine. A virtual machine will never have as good graphical performance as running physically like in Boot Camp. But not having to reboot out of OSX is why I'll continue to use Fusion.
For more info:
Choosing the Right Virtual Machine Settings
Frequently Asked Questions about VMware Fusion (Avout halfway down, the section on Virtual Hardware)
(While it is for Fusion, the overal concepts will hold for virtualization in general.)

HT204053 Why my iCloud doesn't work it says that the maximum number of free account have been activated on this phone

My iCloud doesn't work even tho I have my the password and the username still it's says that I can't

Welcome to the Apple Community.
Unfortunately once all the 3 iCloud accounts have been created on your mobile device, you cannot create any more regardless of what you do. You will need to re-use one of the accounts that you have already created or create your new account on another device or computer.

Reinstalling TouchSmart software after a clean install / upgrade of Windows 7

I have an HP TouchSmart 610-1150xt. I have no use for much of the preinstalled software, so I would like to perform a clean install of Windows 7. At the same time, I would like to upgrade the preinstalled Windows 7 Home Premium to Windows 7 Ultimate. In addition to all drivers, I would like to reinstall the TouchSmart software. I have already made system restore disks to recreate the factory state, if needed.
Ideally, I would also like to reclaim the hard disk space currently occupied by the recovery partition. During the clean install, I would like to create two separate partitions -- one for the OS and applications; a second for only data.
I have performed numerous clean installs of Windows in the past, but have always had access to copies/licenses of all applications to add to the clean OS. I have downloaded all drivers from the HP website, but cannot find copies of the preloaded software. While the application manager currently allows reinstallation of preinstalled software, it is not obvious that this option would be available from the recovery disks (or the recovery partition) after a clean install of Windows 7 Ultimate.
Are individual copies of preinstalled software available from HP, perhaps on an FTP site? If so, how can I download these programs? If individual copies of these applications are not available for download, can they be accessed from the the recovery media or recovery partition after performing a clean install/upgrade of Windows 7?
Thanks.

Did a Google search: here's something I found: http://blog.ehuna.org/2009/01/how_to_reinstall_the_hp_touchs.html ...

Recover a file after OS clean install

I did a clean install on macbook pro and did not take a good backup.
I have some pdf files that I really need it.
How do I recover those files after I already have done the clean install of OS?
Thanks.
mehbs

You can purchase file recovery software which may or may not be able to recover the file.
Try http://subrosasoft.com/software/filesalvage
You can download a demo copy which will tell you what it will recover. Then you pay for the recovery.
What ever you do stop using the Mac. Any usage will only cause more files to get overwritten and be irrecoverable.
Allan

OfficeJet 4315 no longer works after Win 7 and Office 2010 service packs applied

I've used OfficeJet 4315 on a Toshiba Satellite with WinXP (SP3) and Office 2003 and been delighted with the printer. I recently migrated to a brand-new Acer Aspire with Win 7 and Office 2010 (home & student ed.) At first, the 4315 worked well--in fact, all I had to do was plug in the USB connection and the in-OS drivers installed automatically. However, something has now caused the printer too be essentially useless! I think it happened after I applied SP1 to Win 7 and/or the service pack to Office 2010. I can no longer print Word files (.doc or .docx), Excel spread sheets (.xls or .xlsx), PDFs, Web pages, or even e-mails, The only things I can print are .txt files or equivalent and .jpg files or equivalent. I've tried deleting and reinstalling the printer (including deleting the drivers and reloading them from Windows Update). I don't believe I should have to replace a perfectly good printer just to support Windows 7 and Office 2010. I NEED HELP URGENTLY with this problem! If anyone has any knowledge or ideas, I'd be forever in your debt. (HP, I'd even pay to get the help I need on this one!!) TIA.

Hi,
Based on your description, my understanding is that the PDF files cannot be checked out to local drafts folder after Office 2013 is installed.
Did this issue occur with Office files?
I recommend to check if the Office files can be checked out to local drafts folder with Office 2013.
And it is recommended to use Office 2010 with SharePoint 2010 for best practice.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Icloud doesn't work after a clean install of windows 8 pro and office 2010

Similar Messages

Maybe you are looking for