Acrobat 9 Pro and Office 2007 - Incompatibility??

I have been reading comments on other forums about a compatibility issues between these two softwares. See Amazon product feedback reviews on Acrobat 9 Pro for example.
Is this a issue users here are experiencing?.

Some of what I saw was someone coming to AA9 from AA5. For OFFICE 2007 he had no choice if he wanted the PDF Maker functionality. There is likely an issue, possibly with either AA9 or OFFICE not being updated. Being sure you are up to date is important. Currently AA9 appears to have no updates, only an add-on. However, it may be that OFFICE 2007 has updates, in fact likely. The bottom line is that the complaints did not provide enough information to see if it was an AA9 problem, MS problem, or a user problem. Enough folks seem to have survived the transition successfully, it is a good chance that the latter problem may be the issue in that forum.
The comment on support is not new in concept. That has been a complaint for as long as I can remember with past versions too. I think it was with AA5 that I started coming to the forum, and that was the move that saved me a lot of time and frustration (other than I now spend a lot of time on the forum).
For comments about compatibility, I would search this forum and see what others have had problems with and the solutions that have been suggested. I think you will get a much better feel for the compatibility. Two of the comments on the link praised the software.

Similar Messages

  • Acrobat 8 Pro and Office 2007 Problem

    I posted this in the CS3 forum originally. They told me to post here too.
    Issue:
    When logged in as a local user (no admin rights) Word 2007 will crash the whole computer when you type a key.
    The reason I am posting on Adobe forums is that this only happens when CS3 is installed as well on the same computer.
    Troubleshooting:
    Both products work fine as a local user account, if only one or the other are installed.
    During login, Acrobat Pro will display a MSI/Installer progress bar for about 30secs. After I updated Acrobat to 8.1.3, that stops, but the Word crashing problem doesn't.
    When starting Office, setup runs everytime. It shows just a progress bar and goes for about 1min.
    On a doc, if I wait about 5min and don't do anything. A MSI install progress bar will run for "MS Office 2007 Pro", this will re-spawn for several mins. until it finally stops. After that, Word IS usable.
    No other problems with CS3.
    Fully updated both CS3 and Office 2007
    This could very well be an Office issue, but it is associated with CS3 also being installed on the same computer.
    Any help would be great!

    Forgot again! Using XP Pro sp2 and sp3.

  • Acrobat XI Pro crashes Office 2007 Powerpoint when converting to pdf

    I have a Dell laptop with Windows 7 x64 and Office 2007.  I also have Acrobat XI Pro.  When I convert a .ppt powerpoint file to .pdf, powerpoint stops working. 
    When I click Convert to pdf, Acrobat prepares the slides and then begins publishing and about 1/4 of the way through I get a message that powerpoint has stopped working.
    I have run the Office Diagnostics and it found nothing.
    I have reinstalled Acrobat and it didn't help
    Is there a compatibility issue?  Would an older version of Acrobat Pro work such as Acrobat 9 or 10?
    Is there an Acrobat Preference that I could change that would solve the problem?
    Thanks
    Tracy

    Thank you, it actually turned out to be the specific document, other
    powerpoints converted without error.
    Thanks, and Have a Great Day,
    Scott Halet
    <http://www.linkedin.com/pub/scott-halet-mba/7/727/740>
    http://www.linkedin.com/pub/scott-halet-mba/7/727/740

  • Acrobat 8.1 and Office 2007/2010 Professional

    I have a user stating she can't create PDF's from within Acrobat 8.1 Professional. When she selects Create pdf -> From File and selects a word document from her desktop, it gives her the following message: "Unable to open document...Please check to see if you have read permission for the above file". I was able to create the pdf by using Word's save as function. Her machine is Windows 7 with Office 2007. A similiar situation happened to another user who has Windows XP/Office 2010, when he attempts to create pdf using the same method above, he gets the following message: "Missing PDFMaker files". The Acrobat plugin is not disabled. Anyone have any ideas?

    Big difference between 2007 and 2010 verisons of WORD. Also, you need to update AA8 to have hope of getting Acrobat to work in Win 7. Adobe will tell you to upgrade to AA X with Win 7 (they do not support AA8 with Win 7, but several folks have gotten it to work in the 32-bit version of Win 7). Any operations for AA8 in Win 7 are always a potential for failure. However, first try to print to the Adobe PDF printer from WORD. That should work with either 2007 or 2010. With AA8, that is ALL you can do with OFFICE 2010, nothing more.
    With OFFICE 2007 you may be able to get things to work. You need to insure PDF Maker is active in WORD -- it shows as an Adobe menu item. If that does not show, then you will have to activate the macro in WORD. If you get the macro working, you may be able to use that menu to create a PDF. If that works, then you have a chance of opening a DOC file in Acrobat. If PDF Maker does not work, then you can not open a DOC file in Acrobat.

  • SLOW PRINTING to Acrobat 8 Pro from Office 2007 on OS Win 7 Pro after updating to 2.0-2.3 ...???

    Everything worked fine for a while. Keeping machine updated and such. Yes have older version Acrobat Pro 8 and downloaded the update files and slowly working through updating. Now on version 2.3. I noticed before that version 3.0 and 3.1 were not allowing me to create pdfs via the Acrobat icon. At the time I could print via "print", but some Office programs were missing Acrobat ICON too.
    Now, my problem: I can't print directly from Office. I can't print within Acrobat. It takes an extremely long, long time (longest wait was about 1/2 hour) to print just one page of text. I found that if I first print using Microsoft's XPS printer function (but only through Acrobat, again, not directly via the XPS print function), then I can easily convert that to a PDF. I've been in the habit of sending PDFs and not everyone is familiar with XPS, so don't want to send that type of file.
    Can anyone help in determining why printing PDF is sooooo slow or not printing at all?
    Thanks.

    Everything worked fine for a while. Keeping machine updated and such. Yes have older version Acrobat Pro 8 and downloaded the update files and slowly working through updating. Now on version 2.3. I noticed before that version 3.0 and 3.1 were not allowing me to create pdfs via the Acrobat icon. At the time I could print via "print", but some Office programs were missing Acrobat ICON too.
    Now, my problem: I can't print directly from Office. I can't print within Acrobat. It takes an extremely long, long time (longest wait was about 1/2 hour) to print just one page of text. I found that if I first print using Microsoft's XPS printer function (but only through Acrobat, again, not directly via the XPS print function), then I can easily convert that to a PDF. I've been in the habit of sending PDFs and not everyone is familiar with XPS, so don't want to send that type of file.
    Can anyone help in determining why printing PDF is sooooo slow or not printing at all?
    Thanks.

  • Batch Processing .doc 2 .pdf with Acrobat 8 Pro and Office 2004 on Tiger

    I have been through the forum posts and for each relavent thread there is the easy batch process that can be done to solve this issue - however, the major flaw I have is (as seen in the attachment) no option to be able to open Word docs. How do I enable Acrobat Pro to be able to open word docs??!?!? It really is an answer I have not been able to find on the web anywhere!

    Then what do you make of this persons post: http://forums.adobe.com/message/1098036#1098036
    "Create a new batch sequence. Select 'Run commands on Selected Folder'. In the source file options enable 'Microsoft Office Word'. Then let run the sequence."
    I am able to work out the whole process except in my Acrobat there is no option for "Microsoft Word" as Bernd suggests - how do I get it on the list.

  • How do I resolve a confict between Acrobat X Pro and Microsoft Office 2010 running on a W7 Pro 32bit

    After I use Acrobat X Pro, and particularly if I have Acrobat X Pro running, the Microsoft Office 2010 programs (Outlook, Excel and Word) become very unstable.
    Outlook has a real tendency to crash when I try to add a file attachment to an email.
    Word gets mad while trying to find files across a local network.
    and Excel almost always crashed while shutting down (the Excel program).
    The problem is getting worse (more frequent crashes) as time goes by.
    I am not "pointing the finger" at any specific software. I'm just looking for some things to try to resolve my problem with my setup.
    If this is the wrong forum for this question I humbly beg your forgiveness (providing you give me a suggestion as to where I should go for help).
    Jim

    I'm having the exact issues, I guess adobe does not monitor these forum and assist their customers.

  • CS3 and Office 2007 problem

    Issue:
    When logged in as a local user (no admin rights) Word 2007 will crash the whole computer when you type a key.
    The reason I am posting on Adobe forums is that this only happens when CS3 is installed as well on the same computer.
    Troubleshooting:
    Both products work fine as a local user account, if only one or the other are installed.
    During login, Acrobat Pro will display a MSI/Installer progress bar for about 30secs. After I updated Acrobat to 8.1.3, that stops, but the Word crashing problem doesn't.
    When starting Office, setup runs everytime. It shows just a progress bar and goes for about 1min.
    On a doc, if I wait about 5min and don't do anything. A MSI install progress bar will run for "MS Office 2007 Pro", this will re-spawn for several mins. until it finally stops. After that, Word IS usable.
    No other problems with CS3.
    Fully updated both CS3 and Office 2007
    This could very well be an Office issue, but it is associated with CS3 also being installed on the same computer.
    Any help would be great!

    Agree, this looks like an interaction between Acrobat 8 and Microsoft Office. The symptom you used to see (prior to 8.1.3) was probably Acrobat's "self-healing" process trying to fix something in Office, probably related to the PDFMaker feature that is installed into Office. Perhaps you have a somewhat unconventional installation of Office 2007 with custom registry settings?
    Also, you mention that Word "crashes the whole computer" - are you referring to a BSOD or what? Word (and the Acrobat plug-ins for PDFMaker) don't go into any protected mode that can cause a full system crash. Very strange!
    - Dov

  • I've uploaded Acrobat XI Pro and it freezes when I'm using it.  I uninstalled and re-installed.  When I login, it says that it is unable to validate the account and has an option to use the trial.  How do I fix this?

    I've uploaded Acrobat XI Pro and it freezes when I'm using it.  I uninstalled and re-installed.  When I login, it says that it is unable to validate the account and has an option to use the trial.  How do I fix this?

    This is an open forum, not Adobe support... you need Adobe staff support to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • I am working in Adobe Acrobat 9 Pro and just created a pdf form from a MS Word document. I need to find out how to have a date field in my form which will update automatically. Can some one out there help me?

    I am working in Adobe Acrobat 9 Pro and just created a pdf form from a MS Word document. I need to find out how to have a date field in my form which will update automatically.

    Update automatically under which circumstances, exactly?

  • How do I upload Adobe Reader 9, Adobe Acrobat XI Pro, and other tools with the Pro onto my new computer?

         Since I am already a customer of Adobe, I need to know how to upload Adobe Reader 9, Adobe Acrobat XI Pro, and the other tools that go with both programs onto my new Windows 7 HP computer without having to fill out a new customer form or without having to pay for another Adobe membership as a new member?  I need to know what to do step-by-step so that I can upload my Adobe reader 9, Adobe Acrobat XI Pro, and the other tools for the Reader and the Acrobat XI Pro.
         You may send the step-by-step instructions to my e-mail address of [email address removed by host].
         Thank you!
    Dean W. Ballew

    I have been trying to start my subscription again for my Acrobat XI Pro and for the annual subscription of the PDF Export for Word and Excel.  The PDF Export expired according to my subscription list, but, I think that I had cancelled my Acrobat XI Pro of $ 29.99 monthly, so, I am wanting to presubscribe for it again, but, when I try to put my Code in for my Debit Card, it will not register with your company.
    So, I do not know what to do to get it back again with my monthly and annually subscription payments for PDF Export and for Acrobat XI Pro.  I have already downloaded the Adobe Reader XI onto my computer so I am set for that product.  I just do not know what to do about the PDF Export and the Acrobat XI Pro to be able to get them started once again.
    Dean W. Ballew

  • I have two issues. 1) unable to update Acrobat XI Pro and 2) unable to register product

    First issue: I have for the second time installed Acrobat xi pro and then click on "check for updates" from the help menu. And it shows that an update is available. But when I update it I am given the following error message:
    Error 1328. Error applying patch to file C:\Config.Msi\PT669B.tmp. It has probably been updated by other means, and can no longer be modified by this patch. For more information contact your patch vendor."
    When I click on "details" I am sent to adobe's "update error" page. Which states the following for error 1328: Error applying patch to [filename]. It's likely that something else updated the file, and the patch can't modify it. For more information, contact your patch vendor.
    I have tried uninstalling program and re-installing program but still get same error message from my attempt at updating. So I am not sure if program is update or not. And I do not know who my "patch vendor" is.
    Second issue: Unable to register product with Adobe. Because the option to do so from the "help" menu which lists "product registration" is greyed/dimmed out. Therefore not giving me the ability to register this product. Please let me know what is causing this problem.

    I am not sure, but will suggest some things to try. On the activate issue, it may be that your system already thinks it is activated and so you might try the deactivate and check. If that works, I would suggest you then uninstall, run http://labs.adobe.com/downloads/acrobatcleaner.html, remove anything left of the Acrobat folder, reboot, and reinstall. Hopefully you can open Acrobat and activate. Then do the updates from the Help menu.

  • Just purchased online Adobe Acrobat XI Pro and error message appeared, but payment has been debited from my credit card already

    Hello,
    Just purchased online Adobe Acrobat XI Pro and error message appeared, but payment has been debited from my credit card already and I do not have the software, so paid for nothing.
    I am using a Mac OS X.
    Thanks for your help.
    Ossama

    [discussion moved to Acrobat Installation & Update Issues forum]

  • I need to be able to right click on a saved document and have the option to convert to Adobe PDF. I have the Abobe Acrobat Xl Pro and used to have this option until I had to create a new subscription. What do I need to do in order to have this option?

    I need to be able to right click on a saved document and have the option to convert to Adobe PDF. I have the Abobe Acrobat Xl Pro and used to have this option until I had to create a new subscription. What do I need to do in order to have this option? I use windows 7

    If you are New to Mac... you may also find these links of Value
    Mac 101
    http://www.apple.com/support/mac101/
    http://www.apple.com/support/switch101/     Switching from PC
    MBP Support
    http://www.apple.com/support/macbookpro
    Cheers,

  • I am using Acrobat XI Pro and tried to install the current update. I got this error message: "Error 1328.Error applying patch to file C:\Config.Msi\pT64b3.tmp It has probably been updated by other means1 and can no longer be modified by this patch. For mo

    I am using Acrobat XI Pro and tried to install the current update. I got this error message: "Error 1328.Error applying patch to file C:\Config.Msi\pT64b3.tmp It has probably been updated by other means1 and can no longer be modified by this patch. For more information contact your patch vendor." tried uninstalling and reinstalling and still get the error. Searched for C:\Config.Msi\pT64b3.tmp and cannot find the path or the file

    For AA XI, you only need the 11.0.09 patch. Download from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows (Use "MAC" if a MAC is used).

Maybe you are looking for

  • Screen Sharing and Drive Sharing

    Hey all! I've got a Mac Mini that I am using to share files. I have an external drive attached via FireWire. The SMB and AFP shares only show up for the EXTERNAL drive when someone is logged in. Is this the expected behavior? Does anyone else have th

  • My iPhone 5 charger is not working, is it under warranty?

    My iPhone 5 charger is not working, is it cover under warranty ?????

  • 3d Extrusion disabled despite having a compatible GPU

    I'm running an iMac that's about a year old (OSX 10.8.3, 2.7 Ghz i5 with 4gb). It has an AMD Radeio 6770M graphics with 512MB ram, which according to the minimum system requirements for Photoshop CC (version 13.1.2) should be enough to do 3d. I don't

  • Use 2 subscriptions to the same country

    hi, I bought the 400 min subscription to israel witch is which is the highest subscriptions to cell phones and landline. i bought another subscription of 400 min just for landline in order to use this one just for landlines but apparently also for la

  • External edit to DNG not visible

    Changes made to a DNG file externally aren't visible in LR. I flushed the cache (Library|Previews|Discard), and I made no changes within LR that would override external changes. Is this a bug, or is there function or setting I'm not aware of? In more