Insufficient disc space error message when there's 100's of gigs available

APERTURE MESSAGE READS: There is not enough free space on your Aperture Library volume to import the selected itmes. It is estimated that you need at least an additional 7036MB of space.
My LaCie Raid reads that it has 858gigs avail and that is the volume where the aplibrary is stored.
Why do I get this message? Is there a in the aperture prefs where a limit has been set? How do I fix this?
Thanks in advance,
Gary

Hiya,
I have just started to get this message too. I have 200GB free on a 1TB Lacie Hard Drive that is only used for Time Machine and also as my primary Aperture Vault.
Formatted in Mac OS Extended Journaled.
I only need to have a few gig free in order to create the new back up...
It has worked fine for months until a couple of days ago.
Any answers anybody?
Cheers Geoff

Similar Messages

"Not enough free space" error message when there is enough free space

Last night I decided to put a few more songs on my iPod, but when I tried I got the following error message:
"The iPod cannot be synced because there is not enough free space to hold all of the items in the selected playlists."
I know that is a load of crap because it says I have 2.59 gigabytes of free space, and I'm only trying to put 11 or 12 new songs on there. I have checked the settings to make sure that it isn't trying to upload my entire iTunes library, and it's not. I have the latest version of both iTunes and the iPod software. I've tried restarting, reinstalling, and all that... Any suggestions?

First of all, thanks for the replies.
I gave it another try today; I deleted the old files and ripped them to my computer again, this time using Windows Media Player instead of iTunes. I tried transferring them to my iPod again and this time it worked. As always iTunes had to convert them to files that it could read, but then it took just a few seconds and all of them made it to my iPod.
I don't know what the problem was the first time around. I checked the file sizes, and the largest was 4.2 MB. There were about 11 songs. It was just a typical audio CD and its total length was 44 minutes.
I guess from now on I'll just import CDs with Windows Media Player and then let iTunes convert them so that I can have even more files on my computer. Oh well. If that's what it takes... Sometime when I have a lot of time to fool around I'll try to see if something is going wrong when I'm importing them with iTunes.
Thanks again for the responses!

How do I restore error message when there's not enough room to sync?

By default, iTunes displays an error message when there is not enough room on the iPod to store all the files that are scheduled for synchronization.
This message also has a checkbox for "Do not remind me again" (or something to that effect). The other day, I stupidly checked this box, and now I don't know how to restore the default setting (i.e., to display the error message). Instead, iTunes just silently does nothing -- with no diagnostic -- if it finds that there's not enough room on my iPod to complete a sync.
Any ideas?

Right click on your iPod in iTunes and select the Reset Warning option.

Hard drive says I have more than 300 GB available with a 500 gb capacity. Yet I get "Low Disk Space" error messages when I do anything.

Hard drive says I have more than 300 GB available with a 500 gb capacity. Yet I get "Low Disk Space" error messages when I do anything.
Attempted solutions:
-I created a new User Account and I can download large files with no issues.
-I ran "Repair Disk Permissions" but still get warnings.
Google Drive Warning:
Spotify Warning:
But on my other user account I can use spotify and download large files, etc.

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Is there a facility to more easily sync music my four Apple devices and my wife's three Apple devices without the horrid iTunes error messages when there is nothing wrong with our connection?

We’ve been using iTunes Match pretty much since the beginning, but recently my wife has turned it off and refused to re-subscribe. I’m fast getting to the same place. It just seems so unstable, wishing Apple would invest some of their billions into it. I read with dismay how many people find Google Play to be so much better. As I write this I see a “Cannot connect to iTunes store” on my iPhone. Noting wrong with our connection … it’s alive and well.
Bearing in mind that I have two Macs, an iPhone and an iPad and my wife has a Mac, iPhone and iPad what we really want is the following.
I want all our music to go up to one location (iCloud or even better our own server). I want an app or web app that I see on the right hand side a list of artists or albums (or playlists) and columns for each device. I want to be able to tick the “matrix” to specify which devices the artist/album/playlist should be downloaded to. When the device is switched on, it must download (no fuss no bother and no stupid I-can’t-do-anything-about error message). A nice enhancement would be to specify three options for each entity (Download, Stream, Not Available). There must be options to easily bulk select.
So … is there such a thing out there?
In my immediate family plus spouses and kids girlfriends/boyfriends there are 11 Macs, three iPads and 10 iPhones. My brothers are very similar. I have nieces and nephews that use Apple. My parents also use Apple. Collectively, we have a bunch of Apple equipment.
Did I mention I'd like it to be stable?

Unless you have EE 4G service the UK 3G networks are the base of your problem - they are just far to variable in download and streaming speeds.
Add to the fact that use can/will eat into your Data usage !
ITunes Match as a service is pretty experimental at best over 3G and really i think so long as you have a 32GB or larger iOS device sync'ing via iTunes on a PC/Mac remains the best way to transfer music.
Remember even with iTune Match your music is STILL ON your own PC/Mac HDD !
Usng the devices tab in iTunes you can customize each differing identified iOS device and load as you please.
When we have a competitively priced stable and extensive LTE network in the UK then reconsider Match at that point.

Disk Space error message when trying to download an app!

I have 84GB spare capacity but App store keeps telling me I don't have enough disk space to download an app of 24GB!
I have emptied my trash and have checked the amount of free space on my HD and there seems to be plenty of space so why is it doing this?
Help!!!

If you're trying to add a large amount of data all at once, and you get an alert of insufficient space, then from the menu bar, select
 ▹ System Preferences... ▹ Time Machine
If the padlock icon is closed, click it to unlock the settings and authenticate. Turn Time Machine OFF, then back ON and close the preference pane. Test.

Error message when ordered more items than it's available in stock.

Hi again,
I've noticed that on the Commerce Reference Store (CRS) if I order, let's say, 10 "branded belt black large" and there's only 5 available in stock my order goes through and the order's status is set to "Pending Merchant Action".
Instead of this, I'd like to BLOCK the Order and display a message to the user. Something like: "There's only 5 items available".
I was wondering what's the easiest way to customize this behaviour?
Thanks!

Insert a new pipeline processor in validatecheckout pipeline chain to do the inventory check.
Peace
Shaik

Error In Displaying Message When There Is An Attachment

I am trying to display an error message in SharePoint 2013. I added the following code
inside my ItemAdding() event receiver to force it to have error:
properties.Status = SPEventReceiverStatus.CancelWithError;
properties.ErrorMessage = "test";
It
works okay, I can see the error message.
However, when I attach any files, and try again, after saving, the attachment will disappear.
When I attach again, I will get a server error:
Please advise.

Hi,
According to your post, my understanding is that you wanted to display error message when there is an attachment.
You need to add “properties.Cancel = true;” to your ItemAdding() event receiver.
You can cancel the event using:
properties.Status = SPEventReceiverStatus.CancelWithError;
properties.Cancel = true;
properties.ErrorMessage = "test";
The properties.Cancel determines if the event should be cancelled. The default is false but once you set it to true it will cancel the event when the current execution ends.
Here is a similar thread for your reference:
http://stackoverflow.com/questions/17828963/custom-error-message-for-event-receiver-in-sharepoint-2010
More information:
http://davehunter.co.uk/2009/03/12/sharepoint-event-receivers-by-example-email-validation/
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Insufficient Disk-space Error Installing WebLogic 1033_generic on Mac

How do I resolve this "Insufficient Disk-space Error" message I get while installing WLS1033? I thought I have more than enough disk-space on my system to handle just about any application software size out there. i mean, beside the 937.72 gigs of available disk-space on my system, I also have roughly 240 gigs external drive space. The system runs on 8 gigs of RAM. I know I am doing something wrong; just can't figure out what. I am new at WebLogic and so any help from the community is highly appreciated. Someone please help.
sbliss

Al
I got this error: "Unable to access jarfile wls1033_generic.jar" when I enter "java -Dos.name=unix -jar wls1033_generic.jar" in the Terminal command line. I very am frustrated. Please help me. Please advise.
One question: Is anybody able to install webLogic? I am just curious.
sbliss

Error message when no atachment found for the workitem while approving ?

Hi Folks,
I need some help in this issue please.
Requirement is, Agent needs to attach a document to work item and then approve. To achieve this, i have put code in for complete execute condition of the step.
This is how it works, when agent attaches doccument and approves, it completes workitem and when there is no attachment, it does not complete work item but it does not stop agent by throwing anykind of error message.
I need a error message when there is no atachment found for the workitem and agent tries to approve it. Please suggest how i can get this done ?
Thanks a lot in advance..
Prasu

Hi
There a couple of different ways to accomplish this.
If your not using standard task/methods your able to extend your method. In here just check if a document is attached, display a message with the message statement, or a FM (e.g. TH_POPUP_TO_INFORM), and then call the workflow statement "<b>Exit_Cancelled</b>", by doing this the workitem will stay in the inbox, in status in process until the document is attached.
If your using standard task / Methods, you need to check if a document is attached in the workflow logic, preferably in a condition. Now - if no document has been attached create a loop, and within this loop create a task, for displaying the message. A easy solution here could be a simple decision task with only one Decision, or if you are able to do some ABAP development, create a small method for displaying the message.
In order to make sure that this task/message will popup immediately, create a container element e.g. "Last_Agent", the do a binding from the decision task to the workflow container ActualAgent -> Last_Agent. Now you Last_Agent as the agent for you "Display Message" Task
Regards
Morten Nielsen

Why Am I Getting The "Insufficient Space On Device" Message When There's More Than Enough Space?

I have the HTC Droid Incredible 4G LTE (ICS/4.0). It has 3.63 GB phone storage remaining, and the sd card has 7.35 GB remaining. Forget the sd card. How can my phone, or any phone for that matter, get the error message of "insufficient space on device" when there's more than enough space on the device? Thank you in advance.

Turn off your phone.
Hold power - and volume up I believe It might be down.
From there you can select recovery and then hold vilume up and tap power to open the menu.
There should be an option there to clear system cache.

HT201413 I have a windows HP computer with windows 7 installed, when I try and update and restore my phone, I get an error message of there is not enough space on your computer to restore your phone. Any suggestions and help is appreciated.

I have a windows HP computer with windows 7 installed, when I try and update and restore my phone, I get an error message of there is not enough space on your computer to restore your phone. Any suggestions and help is appreciated.

You need to discard or save to an external disk and then discard some of the stuff we all tend to keep forever (movies, music, pictures, docs, apps no longer used, etc.). A clogged up disk also does not function ideally either.

I tried to open an Audacity file. I got the following error message: "Warning there is very little free disc space left on this volume. Please select another temporary directory in your preferences. How do I select another temporary directory?

I tried to open an Audacity file. I got the following error message: "Warning there is very little free disc space left on this volume. Please select another temporary directory in your preferences. How do I select another temporary directory?

Audacity > Preferences > Directories. You will probably need to use an external drive as it sounds like you Mac's drive is getting too full???

Get an error message when importing from iPhoto says, "There is not enough free space on your Aperture Library volume to import the selected items. It is estimated that you need at least 44GB of free space."

I get an error message when importing from iPhoto that says, "There is not enough free space on your Aperture Library volume to import the selected items. It is estimated that you need at least 44GB of free space." the drive is empty, I just reformatted it to Mac OSX journaled.

I'm guessing this is an extrenal drive, correct? If so make sure the library you're importimng into is really located on the external drive. By default Aperture creates its library in your home pictures folder.

When i try to order prints i get an error message saying there is a problem with my network and my network is working

when i try to order prints i get an error message saying there is a problem with my network and my network is working. How can i solve this problem?

Try a different media. I have good luck using Maxell discs.

Insufficient disc space error message when there's 100's of gigs available

Similar Messages

Maybe you are looking for