Integrate oracle applications attachment feature with Oracle iFS

Hi Gurus,
we have installed oracle contracts 11.5.8 and here is some overview on the issue we are facing.
The contract creation and approval process is as follows. User creates contract header and attach contract word template document to the oracle contract header. User then submits the contract for approval. When the contract goes through the approval process the approver receives the notification and is expected to open the contract header and then go to attachments to open the contract word document. The approver makes the necessary changes to the attached contract word document and then approves the request.
In the above described scenario we have two ways to create the attachements.
1. Create attachment with datatype as FILE. This option uploads the word document in the database and then allows the approver to view the word document. But it does not allow the approver to change and save the word document.
2. Create attachment with datatype as DOCUMENT REGERENCE. This gives error 'Document management nodes not defined'.
We are looking at using Oracle iFS for document management and then integrating it with the attachments ? Can anyone point us to necessary installation and setups required to achieve this ? Can someone let us know if this is even feasible ?
Any pointers will be highly appreciated.
Thanks in advance,
Ganesh Prabhu

Yes is possible. You will need to do a similar way of the use of ASP in SiteStudio. Done the procedures, you can use PHP code and PHP custom fragments.

Similar Messages

  • Oracle Applications Release 11i with Oracle Database 10g Release 2 (10.2.0)

    Hi,
    I am upgrading our Oracle EBS 11i database to Oracle 10g R2 as per note:362203.1.
    In section After the Database Upgrade  --> 5. Implement and run AutoConfig we need to refer to Note:165195.1.(Section 8: Migrating to AutoConfig on the Database Tier).
    Since I dont have the DB enviornement file, I created one by copying the envioroment file from Oracle 9i Home and replaced 9.2.0 with 10.2.0. I also created Apache directory under Oracle 10g Home and copied perl directory from Oracle 9i Home/Apache to Oracle 10g Home/Apache. This way I got the DB enviornement file for Oracle 10g Home.
    Then I used the following command to create the DB Context File:
    perl adbldxml.pl tier=db appsuser=apps
    Then executed autoconfig using:
    adconfig.cmd contextfile=<Full path to the CONTEXT>
    Is this the way I should do? Its working ok but I am not sure if my method is ok.
    Plz suggest if some other method is there.
    Thanks.
    Thiru

    This is a way I used to do it too. I am not sure whether it is the official way, but it works nevertheless.
    Do make sure you run autoconfig afterwards, which will create a new environment file for you. Then stop listener and database, source the new environment file and restart listener and database.
    I found some other procedure in order for you to recreate the environment file:
    1. On the application tier, Execute $AD_TOP/bin/admkappsutil.pl to generate appsutil.zip for the database tier.
    2. Copy this appsutil.zip to the database tier and unzip it into the ORACLE_HOME
    3. Set the following environment variables:
    ORACLE_HOME =<10g ORACLE_HOME>
    LD_LIBRARY_PATH = <10g ORACLE_HOME/lib, 10g ORACLE_HOME/ctx/lib>
    ORACLE_SID = instance name running on this database node.
    PATH= $PATH:$ORACLE_HOME/bin;
    TNS_ADMIN = $ORACLE_HOME/network/admin/<context_name> 4. Edit the $ORACLE_HOME/network/admin/tnsnames.ora file. Change the aliases for SID=<new RAC instance name>
    5. Modify the listener.ora. Change the instance name and Oracle Home to match environment
    6. Start the listener.
    7. From the 10g ORACLE_HOME/appsutil/bin directory, create an instance-specific XML context file by executing the command:
    adbldxml.pl tier=db appsuser=<APPSuser> appspasswd=<APPSpwd>8. De-register the current configuration using the command:
    perl $ORACLE_HOME/appsutil/bin/adgentns.pl appspass=apps contextfile=$CONTEXT_FILE -removeserver9. Rename $ORACLE_HOME/dbs/init<rac instance>.ora , to a new name (i.e. init<rac instance>.ora.old in order to allow AutoConfig to regenerate the file using the RAC specific parameters.
    10. From the 10g ORACLE_HOME/appsutil/bin directory, execute AutoConfig on the database tier by running the adconfig.pl script.
    Now you should have the officially created environment file.
    HTH.
    Arnoud Roth

  • Connect oracle application server 10g with oracle database 9i

    Hello, I am doing a project with Oracle Application Server and application server can not connect with my Oracle 9i database, how do my version of Oracle Application Server is the 10g, thanks for the help and excuse my English

    Well, now it depends how do you want to access your 9i database from Application Server via J2EE application deployed at Application Server or via Portal.
    For J2EE application, you can use connect string for your 9i database in datasources.xml of J2EE app.
    For Portal application, again it depends what you want to do - create an data entry application or just want to fetch a report based on 9i database.
    Hope I have provided answer to your question.
    Regards.

  • Integrate Business Activity Monitoring (BAM) with Oracle Forms Recognition

    Hi All,
    As per project requirement, I have to integrate Business Activity Monitoring (BAM) with Oracle Forms Recognition.
    Does anyone have an idea how can this be achievable from OFR Verifier?
    Thanks,
    Moumi.

    Hi All,
    Apart from my previous queries, I found that there is an sample reporting program - Oracle Application Express application has been developed and tested using version 4.1 of AppExpress.
    To access OFR tables I run the below script in below sequence in my local IPM environment as found in this link- http://workplacedba.blogspot.in/2012/11/ofr-odc-installation.html
    Seq 1 - 01-OFR-AP-Tables_Oracle.sql
    Seq 2 - 02-OFR-AP-Reporting_Oracle.sql
    Seq 3 - 03-XX_ROUND_IT.fnc
    Seq 4 - 04-XX_ROUNDDOWN.fnc
    Seq 5 - 05-XX_ROUNDUP.fnc
    Seq 6 - 06-OFR-AP-EBS-Views.sql
    Seq 7 - 07-INVOICE_NUMBER_FORMATS_INS.sql
    Seq 8 - 08-Insert Into Company.sql
    I couldn't found the below queries in my installables -
    Seq 3 - 03-XX_ROUND_IT.fnc
    Seq 4 - 04-XX_ROUNDDOWN.fnc
    Seq 5 - 05-XX_ROUNDUP.fnc
    Seq 7 - 07-INVOICE_NUMBER_FORMATS_INS.sql
    Seq 8 - 08-Insert Into Company.sql
    can anyone provide me these sql scripts?
    Thanks,
    Moumi

  • Cloning Oracle Applications Release 12 with Rapid Clone

    Hi,
    I was going through metalink doc 406982.1 Cloning Oracle Applications Release 12 with Rapid Clone.
    I couldn't understand a few points.
    I would appreciate if someone can guide me regarding the following queries.
    There is a statement in the doc
    1)An important principle in Oracle Applications cloning is that the system is cloned, rather than the topology ....
    --What is meant by topology in this description?
    2)The Cloning methodology posted on this document requires full Autoconfig complience.
    --didn't get this point.
    3)Note: In the copying tasks below, UNIX/Linux users should ensure that the symbolic links (soft links) are preserved when copying. On most UNIX platforms, this can be accomplished with the cp -RH command. Consult the UNIX man page for the cp command to check the parameters available on your platform.
    --what soft links are being talked about?will the regular cp -R  command not preserve the soft links?
    4)For patching AutoConfig on the E-Business Suite R12 instance, AutoConfig needs to be enabled on both the applications tier and the database tier. (387859.1)
    --HOw do I check if AutoConfig is enabled or not?
    5)Why do I need to synchronize appsutil on database tier from application tier?
    6)Why do we need to maintaain snapshot information?
    What does snapshot actually do?
    Thannks,
    Rushi

    This is what I get when doing "grep rror" from 9239089 logfile.
    will be ignored without error.
    will be ignored without error.
    will be ignored without error.
    0 files had fatal errors.
    0 files had fatal errors.
    Performing second half of mirrored copies...
    No mirrored copies were executed in this patch.
    oracle/apps/ad/splice/adError [120.0.12010000.1] {oracle/apps/ad/splice/adError.class }
    Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.2/forms/java/frmall.jar: No metadata entry META-INF/JRIMETA.DAT found
    Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.2/jlib/ewt3.jar: No metadata entry META-INF/JRIMETA.DAT found
    Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.2/jlib/ewt3-nls.jar: No metadata entry META-INF/JRIMETA.DAT found
    Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.3/lib/xmlparserv2.jar: No metadata entry META-INF/JRIMETA.DAT found
    Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.3/j2ee/oafm/applications/mapviewer/web/WEB-INF/lib/mvclient.jar: No metadata entry META-INF/JRIMETA.DAT found
    Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.3/j2ee/home/lib/mail.jar: No metadata entry META-INF/JRIMETA.DAT found
    Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.3/j2ee/home/lib/activation.jar: No metadata entry META-INF/JRIMETA.DAT found
    oracle/apps/media/ieu_status_error
    oracle/xml/parser/v2/XMLErrorMsg
    oracle/xml/parser/v2/mesg/XMLErrorMesg
    oracle/xml/parser/v2/mesg/XMLErrorMesg_ar_AE
    oracle/xml/parser/v2/mesg/XMLErrorMesg_ca_ES
    oracle/xml/parser/v2/mesg/XMLErrorMesg_cs_CZ
    oracle/xml/parser/v2/mesg/XMLErrorMesg_da_DK
    oracle/xml/parser/v2/mesg/XMLErrorMesg_de_DE
    oracle/xml/parser/v2/mesg/XMLErrorMesg_el_GR
    oracle/xml/parser/v2/mesg/XMLErrorMesg_en_US
    oracle/xml/parser/v2/mesg/XMLErrorMesg_es_AR
    oracle/xml/parser/v2/mesg/XMLErrorMesg_es_ES
    oracle/xml/parser/v2/mesg/XMLErrorMesg_fi_FI
    oracle/xml/parser/v2/mesg/XMLErrorMesg_fr_FR
    oracle/xml/parser/v2/mesg/XMLErrorMesg_hu_HU
    oracle/xml/parser/v2/mesg/XMLErrorMesg_it_IT
    oracle/xml/parser/v2/mesg/XMLErrorMesg_iw_IL
    oracle/xml/parser/v2/mesg/XMLErrorMesg_ja_JP
    oracle/xml/parser/v2/mesg/XMLErrorMesg_ko_KR
    oracle/xml/parser/v2/mesg/XMLErrorMesg_nl_NL
    oracle/xml/parser/v2/mesg/XMLErrorMesg_no_NO
    oracle/xml/parser/v2/mesg/XMLErrorMesg_pl_PL
    oracle/xml/parser/v2/mesg/XMLErrorMesg_pt_BR
    oracle/xml/parser/v2/mesg/XMLErrorMesg_pt_PT
    oracle/xml/parser/v2/mesg/XMLErrorMesg_ro_RO
    oracle/xml/parser/v2/mesg/XMLErrorMesg_ru_RU
    oracle/xml/parser/v2/mesg/XMLErrorMesg_sk_SK
    oracle/xml/parser/v2/mesg/XMLErrorMesg_sv_SE
    oracle/xml/parser/v2/mesg/XMLErrorMesg_tr_TR
    oracle/xml/parser/v2/mesg/XMLErrorMesg_zh_CN
    oracle/xml/parser/v2/mesg/XMLErrorMesg_zh_TW
    Errors and warnings are listed in the log file
    Also I am getting same kind of errors for patches 8919489,9171651,9833058 and 12404574.
    Although there were neither failures nor any ORA- error in any of the log files.
    Please guide what needs to be done regarding the shown errors for the patches.
    after executing adpreclone on db tier I got the following message in logfile.
    error while preclone on db tier:Attempt to remove existing adcrdb.zip failed
    What could have been wrong?
    Is the message normal and can it be safely ignored?
    As a pre-install task of patch 9239089,I executed adgrantsall.sql
    which gave me a prompt Enter a value for 1:
    I entered apps (apps schemaname/username)
    Is it ok?
    Thanks,
    Rushi

  • Oracle Application Server 10g with 11g Database

    Hi everyone,
    If anyone can tell, is there any compatibility issues in Oracle Application Server 10g with 11g Database?
    Will it work properly?
    Thanks

    hi,
    This will be helpful,
    http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html#CHDBFJFD
    which states
    "All available editions of Oracle Database 11g (11.1.0.6) or higher are supported. Please refer to Metalink note 740417.1 for details on Oracle Database 11gR1 Certification for Oracle Application Server 10g (10.1.2.x) and Metalink note 887365.1 for details on Oracle Database 11gR2 Certification for Oracle Application Server 10g (10.1.2.x) "
    Regards
    Fabian

  • Urgent...integrate EBS R12.0.5  with Oracle Retail 12.0.5 using BPEL..

    Hi All
    We have to integrate EBS R12.0.5 with Oracle Retail 12.0.5 using BPEL..
    can any one please tell me what are the patch sets that need to be applied to
    EBS R12.0.5
    Oracle Retails
    BPEL
    The documentation available on metalinks is for EBS R12.0.2 integration with Retail 12.0.5
    is there any document which can help us with EBS R12.0.5 integration with Retail 12.0.5
    thanks
    Arshad

    Duplicate thread (please post only once):
    Urgent...integrate EBS R12.0.5 with Oracle Retail 12.0.5 using BPEL
    Re: Urgent...integrate EBS R12.0.5  with Oracle Retail 12.0.5 using BPEL..

  • Integrating Oracle Fusion Sales Cloud with Oracle Business Intelligence Cloud Service (BICS)

    Ever wondered how to integrate Oracle Fusion Sales Cloud with Business Intelligence Cloud Service (BICS) ?
    The blog outlines how to programmatically load Sales Cloud data into BICS, making it readily available to model and display on BICS dashboards.
    http://www.ateam-oracle.com/integrating-oracle-fusion-sales-cloud-with-oracle-business-intelligence-cloud-service-bics/

    I wouldn't try installing Oracle VM itself on an EC2 instance, as EC2 is essentially Xen itself. Rather, you should just be able to transport existing Oracle VM images to the EC2 cloud. I think this is what you mean, but your opening paragraph is slightly ambiguous. :)
    From a VPN perspective, I'd use OpenVPN as it has clients for all major operating systems (Windows, MacOS X, Linux) that are fairly easy to package and install. Packages for OpenVPN exist in EPEL so it's easy to install on OEL5. You could also consider using a firewall instead of a VPN and only allowing connectivity from specific IP addresses/ranges. This has the benefit of not requiring client software, but it does require a fixed IP address/range on the client-side.

  • Install developer10g  and oracle application server 10g on oracle linux R6

    i want install oracle application server 10g on oracle linux R6
    in same server oracle database 10 g installed
    the database 10g installed and work fine.
    i try install oracle developer 10g installed .succ
    but the frmbld.sh didnt work
    ./frmbld.sh :line 105 :/u01/u03/app/oracle/product/10.2.0/db_1/bin/frmbld:cannot execute binary file?
    have two user oracle for database ,oradev for developer

    thx
    can give me any link
    any one can help me on application server 10 in oracle linux R6?

  • I am trying to connect oracle develper suit form with oracle 10g database

    i am trying to connect oracle develper suit form with oracle 10g database
    but when i pass username and password
    this message apperars
    ORA-12560:TNS:protocol adapter error
    every time even i try to connect Report or Designer each time same problem
    making no connection .
    can any body help can help me to reslove this prblem
    Arshad khan

    Duplicate thread:
    Re: connection problem

  • Oracle Applications Adapter - working with EBS R12 (inbound/outbound)

    Hi,
    Need to integrate Siebel CRM 8.1.1.5, Oracle EBS 12.0.4, and few other third party systems.
    Planning to use Fusion middleware to integrate, and also use Oracle Applications Adapter.
    Query -
    We would like to know how EBS can work with Oracle Applications Adapter, best practices regarding this.
    We've inbound, and outbound from EBS, for multiple modules.
    Thanks,
    Meera

    You already got an answer by "X A H E E R" in your other thread, so why posting duplicate threads? -- Re: Oracle Jdeveloper Integration with EBS R12.1.3
    You have also posted the same question in "JDeveloper and ADF" forum! -- Re: Integrate Jdeveloper with Oracle E-Bussiness Suite for reporting

  • Do you use Oracle Application Express (APEX) with EBS?

    I am conducting a short survey to determine how you integrate Oracle Application Express with eBusiness Suite. Please take a few minutes to fill out the survey:
    http://apex.oracle.com/pls/otn/f?p=54654:1:0
    {We will not share information with anyone except with your explicit permission}
    We believe that there are a large number of eBusiness Suite customers that are using Application Express in various ways so we are trying to quantify that and get some further information.
    This is all part of a broader effort we are currently undertaking working closely with various people from the eBusiness Suite Development Team.
    This survey is very important to us so please take the time to complete the survey if you use Application Express with eBusiness Suite - It is only 1 page long.
    Thanks,
    David

    Thanks for your reply.
    I did some more investigation to check what could cause this to happene, whereby the report toatal is not displayed at all for few selected paramters.
    What i could analyse was that the records returned were more than 50 (Standard Setting) , which however could not fit into the page, along with that the pagination scheme was not selected. I had to make 2 changes to the Layout of the report
    Pagination Scheme : Row Ranges X to Y(with Next and Previous Links)
    Number of Rows : 500
    This worked for me as the displayed could not be seen on the next page with Previous and next links on the report output.
    Thanks,
    Dips

  • Oracle Applications Adapter responds with error in the API call

    Hi,
    I am using SOA suite 10.1.3.5.
    I have configured the Oracle Applications Adapter to call the payable open import interface (APXIIMPT) concurrent program.
    I am passing two mandatory parameters Source and BatchName to it.
    Before that i have also correctly inserted data into AP_INVOICES_INTERFACE and AP_LINES_INVOICE_INTERFACE tables.
    The invoice is getting created from the oracle apps 11i instance if i try from the front end but my BPEL OA adapter is responding with
    following error :-
    <REQUEST_ID>0
    </REQUEST_ID>
    <RETURN_CODE>2
    </RETURN_CODE>
    <RETURN_MESSAGE>
    Cannot find application information for short name
    Cannot find rows while selecting for application short name .
    Check if the application short name is valid. Contact your System Administrator.
    </RETURN_MESSAGE>
    Any help in this regard is highly appreciated.
    With Regards,
    Harshwardhan Ghugare

    You are getting customized error as a SOAP Fault from PeopleSoft application. 
    Regarding 3 responses, your send port might have retry count = 3 set in your send port. Hence you are getting 3 faults on each request you are making. 
    Now coming to the actual issue, when something goes wrong and you got fault message response, you need to deal with it. Means your orchestration send port will have "Response" and "Fault" response and you will deal with these messages respectively.
    You need to assign MessageTypes for Response and Fault accordingly.
    If you have done all above and still getting an error, check this
    hotfix 978156 which is applicable in case of 2k6R2 and 2009 biztalk versions and happens while dealing with cross object conversion (datetime)
    If this answers your question please mark it as Answer and if this post is helpful, please vote as helpful. Thanks !

  • IPlanet J2EE application not working with oracle 9i but working with 7.3

    We are in a process of upgrading database from oracle 7.3 to 9i.
    We have a working application running on iPlanet Application Server with oracle 7.3 as database. We are using iPlanet Application Server's connection pooling. Our JDBC driver is classes111.zip.
    After upgrading to 9i, our application doesnt work. When I try to run a test application that uses single select statement, this the error I get: java.sql.SQLException: Invalid URL: Driver type not specified
    SQL*PLUS works fine. I havent upgraded oracle client. Do I need to upgrade the JDBC driver or oracle client?
    Any suggestions? iAS version is 6.5.

    If you are new to JSF, then I'd try and simplify the environment in which you are working as the first step to achieving a successful outcome.
    JSF 1.2 is a certified and well tested component of WLS, so we know it works. I'm not sure of the effect of all those additional modules you are adding in there -- it appears as if you have gotten a Faces implementation instantiated, but there could be some form of version difference/conflict since it can't find a method its looking for.
    Using Oracle Enterprise Pack for Eclipse (http://www.oracle.com/technology/software/products/oepe/oepe_11115.html) you can build yourself out a pretty simple JSF application to get started from and deploy it to a WLS server. This would remove all the additional libraries you currently have, provide you with a bundled applicaton to deploy and give you a pretty good environment from which you can learn and experiment with JSF.
    -steve-

  • How to front-end Oracle Application Server 10g with Apache 2.0

    Hello,
    I have a seperate apache tier from my oracle app tier and I want to use my compiled apache as a web front-end for oracle apps. I have a completely default configuration at the moment.
    The only documentation I have been able to find on Oracle's site is in regard to using mod_oc4j.so with Oracle HTTP server.
    Is a compiled build of apache supported with mod_oc4j?
    Where can I get the mod_oc4j.so module for apache?
    Is there any good documentation I can use for installing it?

    You mean to say, you found mod_oc4j.so module on Application Server CD ?
    It will surely be there, cos it's an Oracle supplied module.
    The Oracle HTTP Server is based on Apache 1.3 web server.
    http://download.oracle.com/docs/cd/B25221_04/web.1013/b25211/overview.htm#sthref12
    If you already have an Application Server 10g installation then go to:
    $ORACLE_HOME/Apache/Apache/libexecTake mod_oc4j.so, mod_rewrite.so modules from here.
    LoadModule mod_oc4j in httpd.conf file of Apache:
    LoadModule rewrite_module libexec/mod_rewrite.so
    LoadModule oc4j_module libexec/mod_oc4j.so
    Make sure to load mod_rewrite.so before mod_oc4j.
    Restart Apache.
    Aalap Sharma :)

Maybe you are looking for

  • Report / Table for getting Datewise item cost

    Friends, Can u help me know MM Report / Table for getting Datewise item cost in a plant.

  • Exchange rate in case of equity and dividend.

    Hi experts, I required your help, please see below request and help. I have created a equity (stock) transaction in foreign currency using t.code - TS01 My purchase in USD ( for ex. 10000 USD). At the time of purchase i am able to put an exchange rat

  • How to install Windows XP on MacBookPro

    How do I install Windows XP on my MacBookPro? Do I have to buy Windows XP or can I use the cd that came with my PC which has XP on it? Do I just put the cd in and follow the instructions?

  • IPhone storage question

    I have an iPhone 4 and am having problems with the storage. I have about 80 pictures (which says 2.2 GB) and NO apps, yet it says I have used 4.3 GB.  I have deleted everything possible, turned it on and off several times and tried plugging into my c

  • How do I set up two Facebook accounts

      I have two Facebook accounts. when trying to set up in lightroom it always connects me to my personal account. How do I get the option to select access to the second account?