No receiver found for sender

Hello,
Scenario:
Idoc from R/3 to XI and external partner LI.
The idoc has to be converted to xml and sent by email (Email is a Business Service in XI).
Question:
I got an error "no receiver found for sender" when sending the idoc to XI. In the soapheader of the message I see that the service of the receiver stays empty. How can I fill the service of the receiver in the soap header?
Thanks for your reactions,
Erik van Lisdonk

You have to define a Receiver Determination for the Sender & Interface (sending SAP Business System plus IDoc interface) and specify the Receiver there. Furthermore, you will need an Interface Determination to determine the interface of the outgoing email and the mapping that is required to transform the IDoc to this interface.
Finally you will require a Receiver Agreement for the Service 'Email' that specifies the receiving communication Channel (in your case an Email Channel).
This is all well described in the SAP online help. As a starting point, you can have a look <a href="http://help.sap.com/saphelp_nw04/helpdata/en/19/8dba88b1db634f891622e909565f7a/frameset.htm">here.</a>
regards,
Peter

Similar Messages

IDOC to FTP File - Error : SAP:Stack No receiver agreement found for send

Hello Friends,
I need to configure a senario Idoc to FTP File, Í did required settings in R3 and in PI... , did mapping and configuratino in PI... and when I send my idoc I got error msg in monitor
<SAP:Stack>No receiver agreement found for sender ,BMG_ASN_File_Component to receiver ,GTN_224,http://adis-bmg.de/asn,SI_BMG_ASN</SAP:Stack>
I search the fourm but did not got my answer, me just a bit confused...
In my senario I have having followings:
1. Bussiness System ( RFT : sender R3 system). ( I have define a party and make a connection under Idoc Partner )
2. Bussiness Component ( ZTEST_COMP as on Reciever side is File Server, so I define the reciver as bussiness component )
3. Communicatin Channel
 File with protocol FTP having communicatin component as my Bussiness Component ( reciver ). there I defied the required info for FTP
4. Reciever Determination
 Sender:
 - RFT
 - Idoc-Interface
 - urn:sap-com:document:sap:idoc:messages
 Reciever
 communication party = space
 communicatin component = ZTEST_COMP
 Configure Reciever:
 There I again define the communication component as ( ZTEST_COMP)
5. Interface Determination
 -RFT
 - Idoc-Interface
 - urn:sap-com:document:sap:idoc:messages
 Reviever:
 ZTEST_COMP
and define the mapping which I did in design ( although I have seen some threads where mentioned we dont need maaping in this case ) ?
6. Reciver agrement
sender:
- RFT
Reviver:
- ZTEST_COMP
- SI interface ( SI_BMG_ASN )
- http://test-etc.de/asn
and included my CC for file .....
Now when I send Idoc I got error msg that Reciver is not found : am I dong something wrong ? do I have to defien a bussiness system instead of Bussiness Component ?
Pls suggest...

( I have define a party and make a connection under Idoc Partner
Do you really need a party in your communication? Should it not be a partly-less communication.
In the receiver agreement ensure that you have included the inbound message interface.
communication party = space
No need to give any space.
In the Interface Determination i hope that you have included the receiver meessage interface and then the corresponding Interface Mapping.
If still not works then make some dummy changes and again activate....correspondingly check the cache status of the ID-objects
Regards,
Abhishek.

CO_TXT_OUTBINDING_NOT_FOUND and No receiver agreement found for Sender

Hi,
I had imported an RFC in to two different SWCV. In ID I'm able to see the RFC interface listed under one of the business systems but not in the other. Please help me out with this.
When i tested the scenario i got this error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_OUTBINDING_NOT_FOUND</SAP:Code>
<SAP:P1>-WB_APDRP_DEV_ISU_200</SAP:P1>
<SAP:P2>-WB_APDRP_DEV_CCC,urn:sap-com:document:sap:rfc:functions.ZPI_CONSUMER_PAYMENT_BILL_DATA</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver agreement found for sender -WB_APDRP_DEV_ISU_200 to receiver -WB_APDRP_DEV_CCC,urn:sap-com:document:sap:rfc:functions.ZPI_CONSUMER_PAYMENT_BILL_DATA</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I cleared the cache using SXI_CACHE and http://Server Name:Port/CPACache/refresh?mode=full and still got this error. Can someone explain me about this..
Regards
Satt

Hi ,
This error generally Comes when aggrements are Not There in ID.
1. Check if all the Objects in ID are activated.
2. First test your Configuration Objects IN ID Only ( Tools - test Configuration )
if this gets Successful , Please tell...
Regards
Prabhat Sharma.

Integrated Configuration- Problem occurred in receiver agreement for sender

Hi , I am using AAE in PI 7.1 and it is proxy to file scenrios.
When Ia m doing testing in Integration Directory in test configuration its giving me this error .
Problem occurred in receiver agreement for sender -<ECCBUSINESSSYSTEM> to receiver -BS_D_EPS,http://abc.com/sap/pi/HR/Qualifications.Qualifications_Async_Out: No receiver agreement found for , -<ECCBUSINESSSYSTEM> , BS_D_EPS, http://abc.com/sap/pi/HR/Qualifications, Qualifications_Async_Out
( here it should take interface Qualifications_Async_In, but logs says it is pointing to outbound interface)
here when I am going in to trace logs then it seems that are not able to understand the receiver interface . rather then it is taking sender inface in logs..
In trace logs . I am getting
Receiver Determination
<Not found>
<Trace level="1" type="B">CL_RD_PLSRV-ENTER_PLSRV</Trace>
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N </Trace>
<Trace level="1" type="T"> Cache Content is up to date </Trace>
<Trace level="2" type="T">Start with given receiver - BS_D_EPS </Trace>
<Trace level="2" type="T">Using Receiver Determination 00000000000000000000000000000000 </Trace>
<Trace level="1" type="T">No Relation found - accept given Receivers. </Trace>
<Trace level="2" type="T">...extracting Receiver from Header: BS_D_EPS </Trace>
<Trace level="2" type="T">Classic Receiver Determination via Rules. </Trace>
<Trace level="3" type="T">...create rule engine </Trace>
<Trace level="2" type="T">No Receiver found behaviour: 0 </Trace>
<Trace level="2" type="T">Number of Receivers:1 </Trace>
<Trace level="1" type="E">CL_RD_PLSRV-ENTER_PLSRV</Trace>
Interface Determination
<Not found>
<Trace level="1" type="B">CL_ID_PLSRV-ENTER_PLSRV</Trace>
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N </Trace>
<Trace level="1" type="T"> Cache Content is up to date </Trace>
<Trace level="1" type="T">...There is no Interface Determination configured for receiver party and receiver service BS_D_EPS </Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) BS_D_EPS Qualifications_Async_Out </Trace>
<Trace level="2" type="T">...valid InbIf without Condition: Qualifications_Async_Out </Trace>
<Trace level="2" type="T">Number of receiving Interfaces:1 </Trace>
<Trace level="1" type="E">CL_ID_PLSRV-ENTER_PLSRV</Trace>
Operation Mapping
<Not found>
<Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>
<Trace level="2" type="T">......attachment XI_Context not found </Trace>
<Trace level="3" type="T">Mapping already defined in interface determination </Trace>
<Trace level="1" type="T">No mapping configured </Trace>
<Trace level="1" type="E">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>
I have developed the other integrated configuration scenario and this is working fine .
please let me know how can I troubleshoot it

I am using sender as Soap and receiver as File adapter.
here the problem is that while going for interface deteremination and receiver agreement it is calling to Outbound interface .
It should call the inbound interface. I put all the details correctly and deleted all the objects and crated again for both Ir and Id..
I put the name of inbound interface in configuration but while executing its calling outbound interface.

No Receiver agreement found for Sender

Hello,
I have a scenario like this : sending an IDoc from R/3 4.6c to R/3 4.7 through XI 3.0.
I am struck up with the follwoing Error in SXMB_MONI
"outbound binding exception: No outbound binding found for , R46, , ENT, urn:sap-com:document:sap:idoc:messages, ORDERS.ORDERS04"
The Complete TRACE is as follows:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="B" name="IDX_INBOUND_XMB" />
- 
<Trace level="1" type="T">ALE-AUDIT-IDoc-Inbound Handling</Trace>
<Trace level="1" type="T">IDoc-Inbound-Handling</Trace>
<Trace level="1" type="T">Syntax-Check-Flag X</Trace>
<Trace level="1" type="T">IDoc-Tunnel-Flag X</Trace>
<Trace level="1" type="T">Queueid</Trace>
- <Trace level="1" type="B" name="IDX_IDOC_TO_XML">
<Trace level="1" type="T">Get the Metadata for port SAPR46</Trace>
<Trace level="1" type="T">Convert Segment-Definitions to Types</Trace>
<Trace level="1" type="T">Make Syntax check of actual Idoc</Trace>
</Trace>
<Trace level="1" type="T">Set Receiver Routing-object</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_IDX_IDOC_RESOURCE-SET_IDOC" />
<Trace level="1" type="T">Exit Function IDX_INBOUND_XMB</Trace>
- <Trace level="1" type="B" name="CL_IDX_IDOC_RESOURCE-GETBLOBDATA">
<Trace level="1" type="B" name="CL_IDX_IDOC_RESOURCE-ITAB_TO_BINARY" />
</Trace>
<Trace level="1" type="T">COMMIT is expected by application !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = XI3</Trace>
<Trace level="1" type="T">client = 800</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = SMART01</Trace>
<Trace level="1" type="Timestamp">2004-12-27T20:08:46Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = F0EAB201EEA5F74A814EF22C32394FD0</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="1" type="T">Queue name : XBTI0009</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0009</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = XI3</Trace>
<Trace level="1" type="T">client = 800</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = SMART01</Trace>
<Trace level="1" type="Timestamp">2004-12-27T20:08:46Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- 
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- 
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTO____0000</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = XI3</Trace>
<Trace level="1" type="T">client = 800</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = SMART01</Trace>
<Trace level="1" type="Timestamp">2004-12-27T20:08:46Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="1" type="T">No mapping required</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="CL_IDX_IDOC_RESOURCE-GETBLOBDATA" />
<Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">
<Trace level="1" type="T">processing the outbound binding</Trace>
<Trace level="1" type="T">search outbound bindings</Trace>
<Trace level="1" type="T">outbound binding exception: No outbound binding found for , R46, , ENT, urn:sap-com:document:sap:idoc:messages, ORDERS.ORDERS04</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
</SAP:Trace>
I have made neccesary Configurations for the Receiver agreement in the Configuration Directory...
Anybody could please help me out...
Regards,
Romit Arun Shankar

Hi Frank,
Many Thanks for your reply.The problem got sorted out and the IDoc(ORDERS04) which i send in SAP 4.6c gets into SAP 4.7 AS ORDERS04 but i have a new problem now....
I didnt use any mappings until now...but now i have to have the segment E1EDK14 filled up for Sales organisation, Distribution Channel, Division details as well as the material number. These segments will not be filled up when a PO is sent from the source system.These segments has to be filled only in the XI system...Is it ? or is there any other solution for it....
Now how we can have this segment E1EDK14 which can occur any number of times with constant values for SORG,DV,DC in the mapping process....
Waiting for ur replies....
Bye,
Romit Shankar Arun.
For this

"No receiver agreement found" for BPM ???

Hi everybody
I think this could be an issue in the cache. I have a ccBPM and when I am sending the message who starts the BPM to the Integration Engine I got the following error:
<SAP:Stack>No receiver agreement found for sender -BS_SQL_Database to receiver -IP_ScanningStatus_01,http://xxxx.com/common/scanning.MI_JDBC_Response_Asyn_ABS</SAP:Stack>
IP_ScanningStatus_01 is an integration process and you do not need a receiver agreement ("not required" in receiver determination) to send a message to an integration process. Two weeks ago the process work and the very strange is, that in sxi_cache it shows the 31.07.2006 as last change/activation, but I did an activation yesterday. A full cache refresh did not change anything and the status of the cache is "up to date". We are on SP14 (:-<)
Regards Oliver

Hi Udo
yes, that is exacly my problem.
I deleted the corresponding processes in the repository and in the configuration. I recreated the process in the repository under the same name and after that I tried to import the porces in the configuration under the same name, but now I got the following error:
Unable to transport object Integration Process IP_ScanningStatus_01 | http://xxxx.com/common/scanning (CE_ONESAP_ACETATE_MFG_xx, 1.0 of celanese.com) of type RepBProcess from application REPOSITORY on system REPOSITORY. Detailed information: Attempt to serialize the generic part of object Integration Process IP_ScanningStatus_01 | http://xxx.com/common/scanning failed(serialization problem)
Any Ideas?
How can I delete the old process out of cache?
Regards Oliver

Error in BPM (No receiver agreement found from sender to bpm)

Hi all
In a simple bpm scenario, I am getting a error that No receiver agreement found for sender service to bpm integration process.
What might be the reason?

your configuration should like this.
say u are doing File to File using BPM
File to BPM
then BPM to File.
so u need to create RD where sender is fileservice and receiver is BPM.
second u hav to create another RD where BPM is sender and Fileserviceis receiver.
So there should be
one Sender Ag
two RD
two ID
one RA.
Thanks
Farooq.

Missing receiver agreement for incoming IDoc

Hi guys,
I transfer IDoc's from a SAP-system to XI to start a ccBPM-process
For that I don't need a receiver agreement.
But why I get always the error message "No receiver agreement found for sender -<SAP-SYSTEM> to receiver -<integration process>" ?
For other IDoc which coming from the same system but starting another process everything is working fine!!!
I don't understand that.
Could somebody help me please? Thanks very much in advance.
Regards, Thomas

Hi,
please can you check in transaction SXI_CACHE if the return code for the IP is 0.
Also, for the Interface that are working is it the same scenario SAP to IP with IDocs on the Outbound?
Regards
Vijaya

Error in BPM: "no interface action for sender or receiver found"

hello,
i configured a interface scenario SOAP - PI - Idoc using a BPM sync/async bridge.
i followed the document
when i try to call interface with my soap client i have the follow error in SXMB_MONI:
Timeout condition of pipeline reached
if i check the detail in trace i can found the follow message:
<Trace level="1" type="T">select interface SI_MATREQ_ABS</Trace>
<Trace level="1" type="T">select interface namespace http://pmf/orders</Trace>
<Trace level="1" type="T">--no interface action for sender or receiver found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
in BPM monitor i cannot see any interesting logs for determine the problem.
I clear cache many time and reimported Integration Process more time.
Have u some suggestion?
thanks in advance

Hi,
Check whether this thread help you or not....
SXMB_MONI: no interface action for sender or receiver found
Regds,
Pinangshuk.

XML Monitor: no interface action for sender or receiver found

Hi,
I am new to XI and currently working on Supplier Network Collaboration ( SNC) to Integrate PO's from ECC to SCM system via XI. I have successfully triggered PORDCR1 message for which I was able to see the XML message in XI. The message is stuck on the Inbound of SCM system ( seen in SMQ2 with error message "Internal error, calling address update without address ID Message no. SR053).
When i double click on Inbound queue (SMQ2) in SCM system it takes me to SXI_Monitor
Below is the log from bottom screen for Trace. Can you please check and see if you could help to resolve the issue?
Thanks,
Tejinder
Below is the Trace bottom screen details
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">http content length 7569</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- 
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="1" type="T">Process ID: 27633</Trace>
<Trace level="1" type="T">Work Process ID: 0</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = AM2</Trace>
<Trace level="1" type="T">client = 001</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = ALE_SNC</Trace>
<Trace level="1" type="Timestamp">2014-09-10T15:06:15Z CST</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = 005056B61D0E1ED48E9F7E70255B98CE</Trace>
<Trace level="1" type="T">PLNAME = RECEIVER</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline = RECEIVER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_RECEIVER</Trace>
<Trace level="1" type="T">Queue name : XBTR0005</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTR0005</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">-----------------------------------------------------</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">-----------------------------------------------------</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="T">--start determination of sender interface action</Trace>
<Trace level="1" type="T">select interface</Trace>
<Trace level="1" type="T">select interface namespace</Trace>
<Trace level="1" type="T">--start determination of receiver interface action</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface ReplenishmentOrderNotification_In</Trace>
<Trace level="1" type="T">select interface namespace http://sap.com/xi/SNC/Global</Trace>
<Trace level="1" type="T">--no interface action for sender or receiver found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
</SAP:Trace>

Hi Tejinder
Check this link
NO INTERFACE ACTION FOR SENDER OR RECEIVER FOUND
SXMB_MONI: no interface action for sender or receiver found
Error: no interface action for sender or receiver found
no interface action for sender or receiver found - SMQ2 SYSFAIL
Regards
Osman
Message was edited by: Osman Jabri

Error: no interface action for sender or receiver found

Hello,
I have configured a asynchronous RFC to JDBC scenario.
When i try to execute the end to end scenario , the message in SXMB_MONI is with a green flag(scheduled) and queue status is yellow and when i double the message , the trace shows following message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- 
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="1" type="T">Work Process ID: 25711</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = HXD</Trace>
<Trace level="1" type="T">client = 001</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2010-05-24T12:23:09Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = 3CA00D0C20460CD10B3CA18E3C804118</Trace>
<Trace level="1" type="T">PLNAME = RECEIVER</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline = RECEIVER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_RECEIVER</Trace>
<Trace level="1" type="T">Queue name : XBTR0004</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTR0004</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="T">--start determination of sender interface action</Trace>
<Trace level="1" type="T">select interface</Trace>
<Trace level="1" type="T">select interface namespace</Trace>
<Trace level="1" type="T">--start determination of receiver interface action</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface Z_SD_HP_SALESORG</Trace>
<Trace level="1" type="T">select interface namespace urn:sap-com:document:sap:rfc:functions</Trace>
<Trace level="1" type="T">--no interface action for sender or receiver found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
</SAP:Trace>
The pipeline steps on the left hand side in sxmb_moni shows only inbound Message i.e remaining steps are not executed.
When i try the execute message by directly sending message from Runtime Workbench , the scenario is executed successfully.
Please help.
Thanks & Regards,
Loveena

Hello,
The problem was with the Client. Our Xi is running on Client 200 wheras at runtime it was picking up the default client 001.
So after changing the default Client 001 to 200.
The scenario was working fine.
But from the third time onwards again it is taking the default Client and I am facing the issue.
I guess it is some Cache problem. Can anybody tell me how to refresh the cache.
Thanks ,
Loveena

Trace level="1" type="T" -no interface action for sender or receiver found

Hi Experts,
I try to integrate PI and abap 7.0 using XI adapter (feel doubts about type).
RWB and SXMB_MONI at PI side show that test message was successfully sent. But I cant see it in DQ
http://cnh.com/XI/SDIIOC01/RCVR</Trace>
<Trace level="1" type="T">--no interface action for sender or receiver found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type
What could be the problem which I'm facing and how could I fix this
regards
nagendra

i understood its ur SAP XI to inbound proxy scenario?
Do the message in MONI of XI is showing correctly?
R u getting an error message in R3 moni?
Did u configure ur scenario correctly both at Xi n R3 using sproxy tcode.
chirag

SXMB_MONI: no interface action for sender or receiver found

Hi Experts,
I try to integrate PI and BI 7.0 using XI adapter (feel doubts about type).
I used 2 giudes: "How to Push Data into BW from XI" and "How to Send XML Data to BW".
SLD check is ok. Proxy is active at BW side. Quality of Service - Exactly Once.
RWB and SXMB_MONI at PI side show that test message was successfully sent. But I cant see it in DQ (RSA7).
xml from SXMB_MONI at PI and reciever part:
<Trace level="1" type="T">--start determination of sender interface action</Trace>
<Trace level="1" type="T">select interface</Trace>
<Trace level="1" type="T">select interface namespace</Trace>
<Trace level="1" type="T">--start determination of receiver interface action</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface data_tobw</Trace>
<Trace level="1" type="T">select interface namespace http://integrate/xi/bw</Trace>
<Trace level="1" type="T">--no interface action for sender or receiver found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
Help me to send xml to BW please.
Thanx in advance,
Alex

>
Alexander Rychkov wrote:
> Hi Experts,
> I try to integrate PI and BI 7.0 using XI adapter (feel doubts about type).
> I used 2 giudes: "How to Push Data into BW from XI" and "How to Send XML Data to BW".
> SLD check is ok. Proxy is active at BW side. Quality of Service - Exactly Once.
>
> RWB and SXMB_MONI at PI side show that test message was successfully sent. But I cant see it in DQ (RSA7).
>
> xml from SXMB_MONI at PI and reciever part:
> <Trace level="1" type="T">--start determination of sender interface action</Trace>
> <Trace level="1" type="T">select interface</Trace>
> <Trace level="1" type="T">select interface namespace</Trace>
> <Trace level="1" type="T">--start determination of receiver interface action</Trace>
> <Trace level="1" type="T">Loop 0000000001</Trace>
> <Trace level="1" type="T">select interface data_tobw</Trace>
> <Trace level="1" type="T">select interface namespace http://integrate/xi/bw</Trace>
> <Trace level="1" type="T">--no interface action for sender or receiver found</Trace>
> <Trace level="1" type="T">Hence set action to DEL</Trace>
>
> Help me to send xml to BW please.
>
> Thanx in advance,
> Alex
confirm if interface data_tobw with namespace http://integrate/xi/bw is present in IR and also if it is activated.
Also do a cache refresh from sxi_cache

NO INTERFACE ACTION FOR SENDER OR RECEIVER FOUND

Hi Masters of SRM
Into SRM/SUS client received an message XML across XI the SXMB_MONI in trace section show the next message

<Trace level="3" type="T">Persisting message Status = 003</Trace>
<Trace level="3" type="T">Message version 002</Trace>
<Trace level="3" type="T">Pipeline SENDER</Trace>
<Trace level="1" type="T">--start determination of sender interface action</Trace>
<Trace level="1" type="T">select interface PurchaseOrderRequest_Out</Trace>
<Trace level="1" type="T">select interface namespace http://sap.com/xi/SRM/Procurement/Global</Trace>
<Trace level="1" type="T">--start determination of receiver interface action</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface</Trace>
<Trace level="1" type="T">select interface namespace</Trace>
<Trace level="1" type="T">--*no interface action for sender or receiver found*</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
</SAP:Trace
NO INTERFACE ACTION FOR SENDER OR RECEIVER FOUND
what can I do ?
thanks.

Hi Nikhil .
yes the Receiver Determination is Active.
I can see other message into message in SUS client these is the complete message.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Work Process ID: 884922</Trace>
<Trace level="1" type="T">COMMIT is expected by application !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="3" type="T">XMB was called with external pipeline PID = ENTRY</Trace>
<Trace level="3" type="T">Getting type of XMB...</Trace>
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="2" type="T">XMB kind = SND_CENTR</Trace>
<Trace level="3" type="T">Start pipeline found</Trace>
<Trace level="2" type="T">Switch to external start pipeline PID = SENDER</Trace>
- <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">
<Trace level="3" type="T">No triggers found. OK.</Trace>
</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="3" type="T">system-ID = SRD</Trace>
<Trace level="3" type="T">client = 009</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = WF-BATCH</Trace>
<Trace level="1" type="Timestamp">2011-03-08T02:25:46Z CST</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = 4D71A759FF9E00D8E1008000B9F06E02</Trace>
<Trace level="1" type="T">PLNAME = SENDER</Trace>
<Trace level="1" type="T">QOS = EOIO</Trace>
<Trace level="1" type="T">Queue-Id = ORD4000000482</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="3" type="T">QOS = EOIO</Trace>
<Trace level="3" type="T">Message-GUID = 4D71A759FF9E00D8E1008000B9F06E02</Trace>
<Trace level="1" type="T">Get definition of external pipeline = SENDER</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = SENDER</Trace>
<Trace level="3" type="T">Internal PLID = SAP_SENDER</Trace>
</Trace>
<Trace level="1" type="T">Get definition of internal pipeline = SAP_SENDER</Trace>
<Trace level="3" type="T">Generate prefixed queue name</Trace>
<Trace level="1" type="T">Queue name : XBQSORD4000000482</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBQSORD4000000482</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="3" type="T">Setup qRFC Scheduler</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="3" type="T">Call qRFC .... MsgGuid = 4D71A759FF9E00D8E1008000B9F06E02</Trace>
<Trace level="3" type="T">Call qRFC .... Version = 000</Trace>
<Trace level="3" type="T">Call qRFC .... Pipeline = SENDER</Trace>
<Trace level="3" type="T">OK.</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="3" type="T">Version number = 000</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 001</Trace>
<Trace level="3" type="T">Message version 000</Trace>
<Trace level="3" type="T">Pipeline SENDER</Trace>
<Trace level="1" type="T">--start determination of sender interface action</Trace>
<Trace level="1" type="T">select interface PurchaseOrderRequest_Out</Trace>
<Trace level="1" type="T">select interface namespace http://sap.com/xi/SRM/Procurement/Global</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Work Process ID: 725194</Trace>
<Trace level="3" type="T">message version successfully read from persist version= 000</Trace>
<Trace level="2" type="T">Increment log sequence to 001</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline SENDER</Trace>
<Trace level="3" type="T">system-ID = SRD</Trace>
<Trace level="3" type="T">client = 009</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = WF-BATCH</Trace>
<Trace level="1" type="Timestamp">2011-03-08T02:25:46Z CST</Trace>
<Trace level="1" type="T">----
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC">
<Trace level="1" type="T">Get definition of external pipeline SENDER</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = SENDER</Trace>
<Trace level="3" type="T">Internal PLID = SAP_SENDER</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_SENDER</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_SENDER</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_INTEGRATION_SERVER</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2011-03-08T02:25:46Z CST Begin of pipeline processing PLSRVID = SENDER</Trace>
- <Trace level="1" type="B" name="PLSRV_CALL_INTEGRATION_SERVER">
<Trace level="1" type="Timestamp">2011-03-08T02:25:46Z CST Start of pipeline service processing PLSRVID= PLSRV_CALL_INTEGRATION_SERVER</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_INTEGRATION_SERVER</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_INTEGRATION_SERVER</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_IE_ADAPTER</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="1" type="T">URL for integration server read from global configuration</Trace>
<Trace level="1" type="T">URL= dest://SAP NETWEAVER XI</Trace>
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
<Trace level="2" type="T">Addressing mode: CallIntegrationServer</Trace>
<Trace level="3" type="T">URL = dest://SAP NETWEAVER XI</Trace>
<Trace level="3" type="T">Host =</Trace>
<Trace level="3" type="T">Port =</Trace>
<Trace level="3" type="T">Transport protocol = HTTP</Trace>
<Trace level="3" type="T">Message protocol = 003000</Trace>
<Trace level="3" type="T">Path =</Trace>
<Trace level="3" type="T">Attributes of destination: SAP NETWEAVER XI</Trace>
<Trace level="3" type="T">Type = H</Trace>
<Trace level="3" type="T">Pipeline =</Trace>
<Trace level="3" type="T">Action = EXECUTE</Trace>
<Trace level="3" type="T">Host = mxwpides</Trace>
<Trace level="3" type="T">Port = 50000</Trace>
<Trace level="3" type="T">Client = 001</Trace>
<Trace level="3" type="T">User = PIAPPLUSER</Trace>
<Trace level="3" type="T">Language =</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">SSL not active</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="3" type="T">Serializing message object...</Trace>
<Trace level="1" type="T">HTTP Multipart document length: 8089</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="1" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="1" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="1" type="T">sap-xi-messageid 4D71A759FF9E00D8E1008000B9F06E02</Trace>
<Trace level="1" type="T">HTTP-client: status code = 200</Trace>
<Trace level="3" type="T">Deserializing message object...</Trace>
<Trace level="1" type="T">HTTP-client: parsed & response message object created</Trace>
<Trace level="3" type="T">HTTP-client: closing...</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2011-03-08T02:25:47Z CST End of pipeline service processing PLSRVID= PLSRV_CALL_INTEGRATION_SERVER</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 001</Trace>
<Trace level="3" type="T">Message version 001</Trace>
<Trace level="3" type="T">Pipeline SENDER</Trace>
</Trace>
</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Async processing completed OK.</Trace>
<Trace level="3" type="T">system-ID = SRD</Trace>
<Trace level="3" type="T">client = 009</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = WF-BATCH</Trace>
<Trace level="1" type="Timestamp">2011-03-08T02:25:47Z CST</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 003</Trace>
<Trace level="3" type="T">Message version 002</Trace>
<Trace level="3" type="T">Pipeline SENDER</Trace>
<Trace level="1" type="T">--start determination of sender interface action</Trace>
<Trace level="1" type="T">select interface PurchaseOrderRequest_Out</Trace>
<Trace level="1" type="T">select interface namespace http://sap.com/xi/SRM/Procurement/Global</Trace>
<Trace level="1" type="T">--start determination of receiver interface action</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface</Trace>
<Trace level="1" type="T">select interface namespace</Trace>
<Trace level="1" type="T">--no interface action for sender or receiver found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
</SAP:Trace>
Thanks.
best regards

BPM Error: no interface action for sender or receiver found

Dear All
I am doing an HTTP to Proxy scenario using BPM Synch Asynch bridge. The error in HTTP is error 500 (Internal Serve Error)
I am getting following error in moni
<Trace level="1" type="T">select interface namespace urn:WorkDelivery</Trace>
<Trace level="1" type="T">--start determination of receiver interface action</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface LocationSynch_Abs</Trace>
<Trace level="1" type="T">select interface namespace urn:WorkDelivery</Trace>
<Trace level="1" type="T">--no interface action for sender or receiver found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
</SAP:Trace>
I have seen some posts on sdn regarding the same problem but couldn't get any solution out of it.
Please let me know how can this problem be solved.
Sourabh

I am using Two Synchronous interfaces:
Synh_Out: Used before BPM
Sync_Abs inside Synch/Asynch bridge:
I am using an switch step to check a condition then in both the branches I have a send step and a transformation step:
Send step1 is using one Asynch Abstract Interface
Send step2 is using Another Asynch Abstract Interface. These Interfaces have different message types.
The Transformation step in both the branchs have same operation mapping.
The laststep after switch step is closing A/S bridge.
There are two RDs after after BPM. They are having the same Interfaces as there in the respective send steps.
I can see the xml version of my BPM
Edited by: Sourabh Nirmal on Mar 30, 2010 8:56 AM

No receiver found for sender

Similar Messages

Maybe you are looking for