Integrating NetWeaver Portal and Interwoven's TeamSite
Hi All,
I have to integrate NetWeaver with Interwoven Web Content Management tool named TeamSite.
Can somedody pass some information for the integration of both(NetWeaver Portal and Interwoven's TeamSite).
Regards,
Srikanth
<< Do not post the same question across a number of forums >>
Similar Messages
-
Integrating Oracle Portal and Siebel with OAM
Sorry for the prob. straightforward question (just getting my feet wet with OAM)
We would like to configure Oracle Portal so that when users login into Portal and click on the link to launch Siebel they are not prompted with a password again.
We have the integration to OAM working for both Portal and Siebel seperatly, but we launch Siebel from within Portal we are then prompted for a password again.
Can someone please point me in the direction of how to configure OAM so that Siebel will reconize the portal cookie and not prompt for a password again.
Thanks
KarlPlease Install IIS WebGate at Siebel Server. Enable the WebGate by logging to Control Panel-> Administrative Console--> ISPAI Filters--> Add the WebGate Location.
Check the webgate status by below URL
http://<FQDN>/access/oblix/apps/webgate/bin/webgate.dll?progid=1
Thanks,
Ajay Babu Pentela -
Netweaver Portal and SAP Easy access GUI
Hi
I have a basic question and need answers from you folks
We have done all the necessary configuration and enhancement in sap crm 5.0 GUI - We are now implementing Netweaver Portal 0.4S and the transaction pages we see in portal are very different from what we have configured in Easy access GUI.
We want the portal pages to mirror to whatwe have in easy access. How will it be done? Is it done from SPRO in CRM or a different process all together.
Please give some directions as to how we can go about it.
Regards
TarangHi Tarang,
To my knowledge, the easiest way to implement your requirement is to use iView of the type SAP Transaction iView.
While creating the transaction iView you have configure the user mapping and give the transaction Tcode.
The resulted iView will be the exact copy of what you see in the SAP GUI.
Let me know if you want further clarification.
Regards,
Prashil -
NetWeaver Portal and ERP 6.0: BI, ESS/MSS and full Portal on one machine
Hello,
with ERP 6.0 you need a EP Core Portal for BI Java. An other EP Core Portal for HCM ECC/MSS. The iViews from this portal you integrate in the main portal via federated portal. But in this scenario i need to much portals and have a lot of maintenance costs (administration overhead for evry portal). For a small Customer i will build one Portal for all. It is possible e.g. to use the BI Portal with ESS/MSS and as full portal?
Best regards,
PatrickHi,
So you would like one BI installation with both the ABAP and the Java-stack with the full BI-functionallity and additionally the XSS-component and set it up to work against the ECC ABAP-only system ?
I think the scenario would actually work, but:
1) You might get future problems if you want to upgrade your BI-system and not the ECC-system.
Is it possible to run the old XSS-components in the new java-stack ?
2) You might get future problems if you want to upgrade your ECC-system and not the BI-system.
What if the new version of the XSS-component demands certain java-components which the BI-system do not have.
So my recommendation is still to run the java-stack on both systems.
ECC with the XSS-java-components and BI with the Bi-java-components.
This way you do not lock yourself into a corner and each system can be upgrade independent of the other. -
Netweaver portal and access to sharepoint document.
Hello everybody,
I need to know if i can create a link from an iview in the portal on a folder with document on share point or on the document itself.
I don't know share point. And i need to know if i could create a link to a document on share point like we could do on the document in the KM Content of the portal.
Any idea?Hello Jérome!
Basicly yes, you can use such links. Sharepoint offers at least two ways of access to it's documents: Either with navigation to a sharepoint site offering the document in question or through WebDAV access.
Another option is to create a Repository to the WebDAV-Source of sharepoint in the portal KM and create links pointing to the new repository.
If you want to use SAP Portal Search (TREX) on those docs, the WebDAV-Repository is your best choice.
Cheers,
Jürgen -
SAP NetWeaver Portal Crystal Reports PDF Export Problem
Hallo all,
We are working with BO Edge XI 3.1 with integration on SAP Netweaver Portal. The problem is that integrated in SAP Portal CR reports cannot be exported to PDF or printed out.
I am using an URL iview with the parameter sOutputFormat=P to run the report.
When I want to print out the report I get the warning message from Internet Explorer "The download of files from this page is for security reasons blocked. Click here..." --> Download the file. By clicking on the u201CDownload this fileu201D the report starts to run again. PDF export doesnu2019t happen.
Did somebody have the same problem?
Thanks a lot in advance!Hello Ingo,
thanks a lot for Your help. I have already talked to my IT department and they are looking for the solution of this problem, too.
Is there a documentation about necessary settings in the browser to work with SAP NetWeaver Portal and Crystal reports?
The problem is that on some clients the PDF export is working and on another clients not. The settings of IE seem to be equal.
Regards,
Katharina -
Publish Crystal Reports to SAP NetWeaver Portal
We are trying to publish Crystal Reports to SAP NetWeaver Portal. So far we found that we always have to save to BusinessObjects Enterprise first, and then we found the ID from Crystal Reports in the InfoView. After that, we put that ID in our iView using PAR template. Here are our questions:
(1) After we save Crystal Reports to BW server, how can we run that report from BW without saving to BusinesObjects Enterprise?
(2) Can we directly publish Crystal Reports to SAP NetWeaver Portal without saving to BusinessObjects Enterprise first?
Thanks a lot for your answers!
PaulThanks for the answers. From your answer, I believe what you are trying to say is that we need to save Crystal Reports to BusinessObjects Enterprise no matter what. We need to save Crystal Reports to BOE first, and then we need to have BOE in order to run Crsytal Reports.
>> Yes
Then we can publish our Crystal Reports saved in BOE to iVew in SAP NetWeaver Portal. Wether we save Crytal Reports to BW is not necesary.
> correct. That is your choice but remember that saving to BW does come with benefits such as an integration into transports.
This also means that we cannot just create Crystal Reports, save it to BW, publish it to SAP NetWeaver Portal, and run it from SAP NetWeaver Portal w/o BOE. Please correct me if I am wrong
>> correct
Ingo -
ECC EHP5 upgrade:is i mandatory to upgrade netweaver portal & BI systems
Hi Gurus,
Currently we are having landscape of :
1.SAP ECC6.0 SP stack at 17
2.Netweaver Portal 7.0 SP stack at 17
3.Netweaver BI 7.0 SP stack at 12
Currently, viewing BI reports using Portal.
We are planning to upgrade our ECC 6.0 system only to EHP5
My questions are:
1. Is it mandatory to upgrade netweaver portal and BI systems also.
2. We are very less dependent on BI. So, can we continue with the same old BI system with ECC6.0 upgraded to EHP5?
Please shed some light on this.
Thanks in Advance.
Regards
Balaji NampallyThere is no any specific details available for the same.. But it seems some BPs need to be upgrade on portals side..
SAP ESS 603(SP06) BP ERP05 ESS 1.41
SAP MSS 600(SP17) BP ERP05 MSS 1.51
SAP PCUI_GP 603 BP ERP05 COMMON PARTS 1.51
BP ERP05 HR ADMINISTRATOR 1.51
BP ERP05 SELF-SERV ADMIN 1.0
BP TECHNICAL INFORMATION 1.51
Pl provide if any has more details.. we are also looking for the same..
Thanks -
Single Sign-On Netweaver Portal with Cornerstone On Demand
Hi
Does someone experiences with Single Sign-On between SAP Netweaver Portal and the Learning Management System of Cornerstone On Demand?
The options are:
- SAML: but at this moment we don't have SAML provider. Is it easy to use this with Netweaver 7.01 SP6 ?
- standard SSO : encrypted string between SAP portal and LMS: client sends encrypted string with userid...based on encryption algorithm.: Has someone developed this (java code) for SSO to an other system?
But can they use Sap Login Tickets?
Best regards
LucHi,
I just recently implemented SSO between SAP system and on demand solution from 3rd party provider. We didn't have any guy with Java skills so we implemented HTTP handler in SICF that generates web page with redirection to the 3rd party system. ABAP does not have a good support for various encryption algorithms so we used javascript interpreter available in ABAP AS. Portal just points to ICF service on ECC system that redirects to on demand solution. Implementation took one day. Obviously, in this case all users had to have account in ECC system.
Cheers -
Run a Crystal Report published on BW from SAP NetWeaver Portal without BOE
Hi all,
We need to create a report using Crystal Reports, save it to BW, publish it to SAP NetWeaver Portal, and run it from SAP NetWeaver Portal. We do not want to use BOE here.
Currently, we are able to save the report on BW.
With Xcelsius, we have seen that we can directly refer to the dashboard's technical name from SAP NetWeaver Portal. Is similar thing possible using Crystal Reports? If yes, how this can be achieved?
Regards,
Dhanesh Aradhyetake a look here:
Portal Part 1
/people/ingo.hilgefort/blog/2010/03/29/sap-businessobjects-enterprise-sap-enterprise-portal--part-1-of-4
Portal Part 2
/people/ingo.hilgefort/blog/2010/03/30/sap-businessobjects-enterprise-sap-enterprise-portal-part-2-of-4
Portal Part 3
/people/ingo.hilgefort/blog/2010/04/08/sap-businessobjects-enterprise-sap-enterprise-portal--part-3-of-4
Portal Part 4
/people/ingo.hilgefort/blog/2010/04/21/sap-businessobjects-enterprise-and-sap-enterprise-portal--part-4-of-4
but you still need the BusinessObjects Enterprise system as only the BusinessObjects system will actually render the report.
Ingo -
Problem with Print functionality in the BI reports integrated into portal
Hi,
We have some BI reports integrated into portal.and we have a Print button,which is a standard SAP functionality,doesnot work.When we click that print button it takes forever to load the page and print it.
Please help me in resolving this issue and points will be rewarded for sure
BalaHi Edward,
Can you clarify on your statement "You can run 3.x queries normally". I am currently declaring the bex web application string in the BW iview created in this format "infocube=0D_FI_C01&query=0D_FI_C01_Q001" and i am not defining the report template anywhere in the iview properties but still the standard template is displayed.
Pls let me know how to run 3.x queries normally.
Also i am trying to integrate only reports which are developed for BW 3.x format in BI system but still the data is not displayed.
Pls let me know incase the SP level of both EP and BI portal are to be considered for this.
EP 7 portal is on SP9 where as BI 7 is on sp12.
Also i noticed the EP portal doesn't have BI Java Addon. will this matter for displaying reports in BW 3.x format.
As you suggested workaround i tried to create a url iviews directly taking the links from the reports displayed in BI portal , i was able to preview the report but when i added those iview reports to role, the reports are constantly loading as it is trying to contact BI system. There are being loaded constantly with nothing displayed on screen.
"http://sapbw:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=0D_PU_C01_Q011&VARIABLE_SCREEN=X&DUMMY=1"
regards
Bharat -
Problem with Print button in the BI reports integrated in portal
Hi,
We have some BI reports integrated into portal.and we have a Print button,which is a standard SAP functionality,doesnot work.When we click that print button it takes forever to load the page and print it.
Please help me in resolving this issue and points will be rewarded for sure
BalaSolved myself.
The answer lies in this link:
http://help.sap.com/saphelp_nw70/helpdata/en/76/489d39d342de00e10000000a11402f/frameset.htm
See the following two properties under Paging:
Columns Scrolled for Each Step (BLOCK_COLUMNS_STEP_SIZE)
Rows Scrolled for Each Step (BLOCK_ROWS_STEP_SIZE)
The values of these two properties have to be changed in the Web Template you are using for your BI Reports.
Regards,
Ankur -
Project systems integration with portal (EP)
Dear all,
I have to integrate the projects systems module with Portal.(EP)
In portal transactional I views can be used to create projects which can be store in the R/3.
Now the issue is to create projects with out using Transactional I views. This should be a simple entry through portal, where in the user keys in the key fields and there by the project is created and scheduled.
For this I have tried with using business packages given by SAP to integrate with portal.
Now the issue is I can display the projects that are created in R/3 through portal and display the necessary fileds required for viewing (I views). Now the main problem is to create the project using these business packages so that the same get updated in the R/3.
But business packages do not have the option of creating the project. I am using the business packages for projects 50.3.1
Has any body come across this type of issue which has to be integrated with portal and subsequent creation of projects through portal
If any body has done this in any other way please kindly share on this.
Experts please throw some pointers on this.
Regards.
Vara PrasadHi Aman,
You may try creating transaction iViews of the desired PS Transaction.
For more help you can take help of your Portal Administrator.
Else, see if this link may help:
http://help.sap.com/Business_Packages/EN/06/3ED93BE53BCD29E10000000A114084/frameset.htm
Regards,
Vivek Pandey -
Questions about Portfolio & cProject in Netweaver portal
Dear All
My Company installed SAP NetWeaver Portal and the business package BP_PPM_DC 450.700 SP7
Now I can use SAP Portal with only 3 menus:
Portal Content
User Admn
System Admn.
But I cannot see:
Project Management
Innovation Mgt
My innovation work
Portfolio Mgt
and so on, like I can see it from standard documentation
What I need also ?
Thanks to all
Salvo50Hi,
please see the cProjects 4.5 FAQ notes 1088160 and 938390. There, you'll find information where to find the documentation.
Direct access:
[http://help.sap.com/saphelp_ppmdc450/helpdata/en/index.htm|http://help.sap.com/saphelp_ppmdc450/helpdata/en/index.htm]
See especially chapter "Technical Description and Configuration Information".
Kind regards,
Florian -
Integrating a Java web application into the SAP NetWeaver Portal
Hello experts,
We have a requirement to integrate a Java based web application into the SAP NetWeaver Portal using iView/iFrame technology. The Java based web application is completely independent from the SAP environment but should be displayed as part of the SAP Portal environment. The other requirement is the main navigation menu for the Java based web application should be configured and provided in the SAP Portal.
Any pointers on how exactly this can be done would be of great help.
Also how can the SSO (Single-Sign-On) to the Java application be implemented so that the user can logon to the java application through the portal without providing the user credentials again.
Thanks in advance.Hi,
I think you can use URL iviews to integrate your java web application with EP. you have the option of doing SSO with the application as well.
Have a look at the sap help material
http://help.sap.com/saphelp_nw04/helpdata/en/f5/eb51730e6a11d7b84900047582c9f7/frameset.htm
http://wiki.sdn.sap.com/wiki/display/BOBJ/CreateURLiviewintotheSAPEP+portal
Regards,
Ganesh N
Maybe you are looking for
-
Hi guys, Was wondering if you could help me out. I have a data block based on a table, and this table contains an image of type blob. Now, I have some items on my form that I only want to display if the image is not null and was wondering how I could
-
i have searched the web for so much time allready it apears that my computer harware does not burn dvds but my real question is i pull up my system specs and look at my system serial number i go to apple manuals and put my serial number in and it say
-
Sybase connection tab not showing in New connection option in SQL developer
Hi, I do not see a Sybase connection tab in New connection option in SQL developer 2.1 where as it was available in ver 1.5 Why is that? how to fix it?
-
I have existing members and I want to add an alias to the members. Two columns in the data file, the Customer_ID and the Customer_Name. Customer_ID already exists in Essbase, I want to add Customer_Name as the alias. I have built a rules file to use
-
What could be the reason for this? And how do I fix it? It is bugging me.