Intel and g5 using Qmaster

I have been trying to add my macbook pro to my Quad g5 cluster
I've even tried it the other way around. The just don't seam to want to co exist. I just get the beach ball of death.
Has anyone been able to have the 2 machines work together.
I have also tried quick cluster but with no success.

You might want to check on the following:
1. Make sure all the computers have their "Firewall" turned OFF.
2. Stop all services and "Reset Services".
3. Repair Disk Permissions and try sharing them again.
4. Make sure they are both of the same version.
6. Make sure that they are both of the same "subnet".
Hope that helps.
Cheers!

Similar Messages

IMac Intel and CS2 using RAW

Does anyone have problems working with RAW images on CS2 and the iMac Intel machine?
Everytime I try to convert an image from RAW to TIFF ( in Bridge ) and then open in CS2 I get a window saying that it cannot open due to an error.
Any help or comment is welcome.
Thanks
Pedro

Problem solved.
I re-installed Photoshop CS2 and the problem is gone.
Why it didn't work the first time, I don't know, although after finishing the installation it showed a window saying that the installation was successful....
Pedro

I am running on OSX 10.10.1 and have a 2009 imac intel and I am having severe latency issues. I am not familiar with macs as this is my home computer used by other family members. Any help on how to troubleshoot why such latency issues?

I am running on OSX 10.10.1 and have a 2009 imac intel and I am having severe latency issues. I am not familiar with macs as this is my home computer used by other family members. Any help on how to troubleshoot why such latency issues?

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

My Macbook pro processor is a 2.4 GHz intel Core i5 using Mac OS X. I go to the network diagnostics and it starts to work. After about a minute the ISP and Server fail. Same thing happens when I try again. My desktop internet works fine.

My Macbook pro processor is a 2.4 GHz intel Core i5 using Mac OS X. I go to the network diagnostics and it starts to work. After about a minute the ISP and Server fail. Same thing happens when I try again. My desktop internet works fine.

hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit
I writ again my problem
i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5 Software Mac OS X Lion 10.7.2 (11C74)
but there is no sound in windows 7 please send me a address sit for downoad driver that i can use in Afghanistan
believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result

Hp 15-r033tx laptop does not show the Nvidia chipset information and only uses Intel HD graphics

My Hp 15 r033tx laptop has windows 8 64 bit installed in it and as it comes with NVidia Ge Force 820 M 2GB graphics card , I have also installed Nvidia and Intel HD Graphic Drivers but in the dxdiag selection it does not list the Nvidia Chipset and information but only lists Intel HD Graphics with 1786 MB.
Also it does not show any Dedicated Video Ram that is normally showing in my other friends desktop with Nvidia Graphics properly installed
Any solutions?

Hi @Suraj2410 ,
Thank you for your inquiry, I will do my best to help.
I see that you have Windows 8 installed and are not seeing your switchable graphics.
When I checked the specification page I see it came with Free Dos. When I checked for support drivers they are listed for Windows 7 and Windows 8.1.
HP 15-r033tx Notebook PC specifications
HP 15-r033tx Notebook PC Drivers
Here are three document to assist you with overcoming this difficulty.
Resolving Video and Graphics Issues
Overview of Switchable Graphics or Dual GPUs
Switchable Graphics on Notebooks Configured with Intel and ATI GPUs
If you are still having difficulties, with it being a recent purchase, I suggest contacting HP support for assistance.
Please call our technical support at 800-474-6836. If you live outside of the US/Canada Region, please click the link below to get the support number for your region. Phone Assist Worldwide
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Problem with Log and transfer using AVCHD

Hello,
I was wondering if I can get help. I use a Canon Vixia HF S200 and FCP Version 6.0.6
I have produced projects on my MacBook Pro 2.33 Ghz Intel Core 2 using this process before with no problems in the past. This problem just started and I dont know what has changed. When I open the Log and Transfer (LT) window I can see and hear all my video from the AVCHD folder in my harddrive just fine, I can scrub with no prob.... But when I add clip to Queue I get an red circle with exclamation on my status.
I have changed the settings on the preferences to Apple intermediate Codec and the audio to plain stereo.. no luck there, the video still will not transfer to my bin.
I have made sure that the toggle Queue state was the little arrow instead of the paused icon...no luck there either... i got a message that says clip queued transferring but nothing is happening.
I will appreciate your help!
Also I didn't mean to tread jack earlier, please accept my apologies, if anybody saw that...

OK!!!!! This seriously cost me 1 day of my life that I'll never get back!!! lol
So I was able to bring the footage in on to Imovie...Yes, I was that desperate...deadlines do that!
Edited the entire project there...kinda sucked...
Then I had the bright idea that if I was able to bring the videos in to Imovie, on my local HD...than something may be wrong with my scratch disk that I use on FC...its a USB disk, specs =slow.
So I changed the scratch disk and yes "Davi S" for good measure I also deleted the Pref files.
So it working again...here I go editing on FC after I edited the entire project on Imovie...
Thanks for all your help!

My partner and I share the powerbook and I use my iPad, Though we each log in with separate accounts all my pics and music are in both libraries . Can I isolate accounts from iCloud ?

My partner and I share the powerbook and I use my iPad, Though we each log in with separate accounts all my pics and music are in both libraries . Can I isolate accounts from iCloud ?

Not quite sure exactly what you want to do, but you cannot do it on a PowerBook. iCloud requires Lion and Lion requires an Intel MacBook or MacBook Pro.

I have an imac OS 10.4.11 and am using Safari 2.0.4. I would like to update this. I have 1 Gb memory. Do I need more memory to update my computer? I would also like to add an airport system and something where I could read word applications.

I have an iMac OS 10.4.11 and am using Safari 2.0.4 I would like to update. I have only original 1 GB memory-do I need more to update?I would also like to add an airport or router and would like to add something where I could open word applications. Is it hopeless?

Thanks. That's a Mid-2007 model with an Intel Core 2 Duo processor. You can run any version of Mac OS X on it up to and including Mac OS X Lion, though for Lion you'd need to increase the memory to at least 2GB, something I'd recommend doing anyway; it's inexpensive and often can increase performance. Your iMac can take up to 6GB if RAM; 4GB is probably a good compromise between cost and performance with a 4GB kit costing about $50.00 US from a reliable vendor such as Crucial.
Your system already should have included the Airport wireless networking capability, so all you'd need would be a wireless (WiFi) access point (aka "router" or "base station") and an appropriate Internet connection. Apple's Airport Express and Airport Extreme, and the Time Capsule if you'd like to have a built-in hard drive for backups and extra storage, are good choices for a WiFi access point, but there are a number of other manufacturers.
As to upgrading the operating system, as I said, you can upgrade to Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, or Mac OSX 10.7 Lion (the most recent release). Apple no longer lists Mac OS X 10.5 on their web site, but if you call the Apple Store you may still be able to purchase a copy. Mac OS X 10.6 Snow Leopard is easily available as is Lion though with Lion you'd need the $69.00 USB flash drive installer or you'd need to purchase and install Snow Leopard first (other than on the flash drive, Lion is only available from the Mac App Store which can only be accessed from Mac OS X 10.6.6. or later). Before you decide, I'd strongly suggest you find out what versions of Mac OS X your applications and perpherals will support, either as they or with a free or affordable update. I'd suspect most of your applications and peripheral drivers would need to be upgraded, at least to support Snow Leopard or Lion. If you consider Lion, make sure of your applications; Lion will no longer run PowerPC-only applications, so many older appliations will not run under Lion.
Finally, as to Microsoft Word documents which is what I presume you mean, you can of course just purchase Microsoft Office. There are other ways to work with Word documents, though. If you just need to view Word documents, TextEdit in MOSX 10.6 and 10.7 (and perhaps 10.5; I can't remember) can open and view many Word Documents. For something a bit more capable, you can purchase Apple's Pages, part of the iWork suite and now available separately for Mac OS X 10.6 and 10.7, or try one of the open-source solutions such as LibreOffice.
Regards.

HP Envy 15 Graphics Problem with Windows 8.1 (Intel and NVidia Graphics). Help!

I bought an HP ENVY TouchSmart 15-j013ea about 6 months ago and I have had a major problem with the graphics that I cannot seem to solve. I think it started when I updated to Windows 8.1, even though I am not 100% certain.
I have noticed the following three problems, and I think they are related:
Some windows (such as Chrome, Skype, or even Device Manager or other windows) are very blurry compared to others.
The firefox menu window has some deformed black arrows instead of the normal ones.
When playing a game (specifically, Star Wars the Force Unleashed 2), after a while I get an error that the computer has ran out of memory. However, according to task manager, only about 50% is in use, not to mention that I have 8 GB of RAM + 2 GB graphics memory. At the same time, the computer gets rather loud (like a fan working overtime) and hot.
The laptop has both Intel and NVidia graphics, and both are enabled in Device Manager. To be honest, I have no idea which is used when, or how to check that (let me know if there is a way)
I have tried the following without success:
Uninstalling the Intel graphics driver from device manager and installing a version I downloaded from the HP website for my laptop and OS. After that, Windows would NOT BOOT, and I had to do a system restore.
Uninstalling the Intel graphics from Programs and Features, and installing 2 different versions from the Intel website. Nothing changed.
Updating Nvidia driver through GeForce Experience. Nothing changed.
Updating Intel drivers from Windows Update. Nothing changed.
Quite frankly I am not sure what the problem could be, since the graphics versions are supposed to be compatible with WIndows 8.1. I also don't get why some windows are blurry and others are not. I am thinking the computer uses only the Intel graphics and not the Nvidia (at least in the blurry windows), but even if that was the case (and it shouldn't be), I don't think I should be having this problem.
At this point, I really need help. My graphics details are:
Intel HD Graphics 4600: Driver version: 10.18.10.3412
NVidia GeForce GT 740M: Driver version: 335.23
NVidia GeForce Experience version: 1.8.2
I am attaching screenshots that show driver details and the problems.
Thank you.
Blurry Chrome:
Firefox menu problem:
Device Manager and driver windows are also blurry, both graphics are shown

I had a similar problem with a Dell laptop. I found the problem was the laptop wanted to switch between the Intel and NYIDIA video cards. It would switch to the Intel when high graphics was not required then to the NIVIDIA when high graphics was required. The laptop does this to save power when high graphics is not required but it caused problems with some applications, specifically high graphics games.
For me the solution was to disable the Intel graphics processor. You can do this by right clicking on your Wallpaper, select the NIVIDIA Control Panel, then select Set Physx Configuration. You will see a dropdown box labeled Select Physx Processor. It is set to Auto by default. This allows the switching I described. Select this dropdown box and select your NIVIDIA processor. This will prevent the laptop from switching and force it to use your NVIDIA processor exclusively.
Hope this helps.
Sacto Fred
Owner and CEO
H&O PC Soultions

IMac Intel and WinXP - Sharing Files Problem

Hi there,
I want to be able to retrieve my files from my Windows XP Pro SP2 computer to my iMac Intel. Both currently are connected via a NetGear Router and have an internet connection (satellite modem). I use the installed Apple Airport Express card.
Problem is that I can't get either computer to see the other; however, I can successfully ping each one from the other one. There is no data loss, no delays. They are connected via ethernet cable from the satellite modem to the router, then from the WinXP computer to a different port on the router. Neither ethernet cable goes into the iMac.
Therefore, as I know that the IP addresses seem to be correct, what else needs to be done here? I was speaking with an Apple rep on the phone who suggested taking one ethernet cable and remove it from the router and connect it direct to the iMac and run it to the XP. Problem is that now the XP computer has no internet connection. So, I have reversed it back in order that both computers can access the internet. (I caught them at their closing time apparently as the agent wasn't on the line when I went back on to report that I had changed the cable over...)
When I select Go and then Connect to Server Settings, after about 1 minute I finally get an error message from the AFP server connection stating: "Connection Failed. The server may not exist or it is not operational at this time. Check the server name or IP address and try again. OK."
I have disabled the firewall on the XP computer. I also removed the antispyware, the main firewall software and the antivirus software. (These are all from Freedom Software [now called ZeroKnowledge I believe].) I then reverted to the Windows Firewall and did some more tests. Nothing changed.The only difference here between this firewall being enabled and disabled is the speed with which the error message appears. If the Windows Firewall is DISabled then it takes about 2 seconds for this message to appear. If ENabled then about 1 min.
So. Any suggestions on how I can get each computer to recognise the other? I would appreciate any suggestions here. Perhaps I've missed installing something or completing a step? According to Apple I have all I need at least for the iMac. As to the XP stuff I believe it is all fine...
I'm new to all things Mac so details might be helpful for me.
Thanks so much in advance.
iMac Dual Intel 20" Mac OS X (10.4.6) 1 GB RAM, NetGear Router WGR614v6
iMac Dual Intel 20" Mac OS X (10.4.6) 1 GB RAM, NetGear Router WGR614v6.

So is the router negotiating the connection with PPPoE for your local network giving you one external IP address and then using DHCP to negotiate local connections for your two computers or are each of the two computers negotiating their own connection with PPPoE giving them each separate external IP addresses?
This info from Apple may be useful to you;
http://www.apple.com/switch/howto/network.html

Which FW cable for Transfer and Future use?

Hi,
Will be starting up a new imac 21.5" Intel i3 soon and have been advised to purchase a 400 - 800 FW cable for the Setup Assistant transfer.
I have multiple older devices currently, a mini DV movie camera, a Pentax digital camera, iPod, etc, some of which use FW and some use USB 2.0.
Should I buy a 800 - 800 cable to keep for these devices that use FW
(movie camera) and a 400 to 800 adapter for the single use of transferring rather than a 400 - 800 cable?
Am I overthinking this? Just want to buy the right piece the first time and not have to make two separate cable purchases ( 400-800 and 800-800 ) instead of a cable and an adapter which should be less expensive?

So this isn't a 400mbs Firewire unit? The info in the pulldown under the Apple "About This Mac" pretty much said it was?
Do you have a port that looks like this, if so it's FW 400.
After going to the link and entering my serial #, all I got were instruction on upgrading memory and installing an Airport card.
Huh, they must not archive manuals that far back from this site.

HT204053 I had Snow Leopard and was using iWeb and Filezilla for my website (not MobileMe). Wanting to move to single-click publishing, I now find it is not supported by iCloud and Mountain Lion. I feel cheated, having bought it mainly for this purpose!

I had Snow Leopard and was using iWeb and Filezilla for my website (not MobileMe). Wanting to move to single-click publishing (supported by MobileMe), I now find it is not supported by iCloud and Mountain Lion. I feel cheated, having bought it mainly for this purpose! The other thing they don't tell you is that Mountain Lion disables OfficeMac, and I am considering uninstalling it for that reason - do I get my money back?!

You stated; "Mountain Lion disables OfficeMac"
That is not true.
Mountain Lion does not have Rosetta so it is not capable of executing PowerPC code. If you have MS Office 2004 that is coded in PowerPC code and will not run in Mountain Lion. What you need to do is upgrade to an Intel version of Office.
Allan

Intel and PowerPC Final Cut project compatibility

I have two computers, a laptop and a desktop, that I use with Final Cut Studio. Both run PowerPC chips. If I purchase a new computer with the Intel chipset, will Final Cut projects be able to go back and forth between the Intel and PowerPC computers? I spend quite a bit of time editing on the road with my laptop then get back to the office and copy the project file over to my office computer. When going back on the road, I copy the project file from my office computer and put it back on my laptop so I can keep editing while traveling.
Thanks!

There is no compatibility issue between PowerPC and Intel as far as Final Cut Pro is concerned. You just have to make sure you have the same version of Final Cut on all machines, because older versions of Final Cut Pro will not open files created in newer versions. You don't have to worry about the processor.

Differences between solaris Intel and solaris Sparc

Hi,
I'm new to this solaris world. But I've been using other flavour of unix. I just wondering if somebody could explain to me the differences between Intel version and Sparc version, please? If you have any website that explain it all would be great.
Thank you in advance.
regards,
zonex

It's more of a question of what architecture you would run it on. But a few things software wise:
SPARC has 64-bit OS support
SPARC generally has more 3rd party software available
SPARC is supported by Sun, Intel is being phased out
Intel I percieve as faster than lower-end SPARC
They are not binary compatible, so you can't run SPARC binaries on Intel and vice versa.

Kinect 2 partially works on intel and renesas usb3 chipsets

hello,
i have gigabyte ga-z77-d3h mobo, win 8.1 x64, kinect 2 for windows and KinectSDK-v2.0_1409-Setup.exe
this mobo has two usb3 chipsets, intel and etron ej168, also has stlab-u 780 pci-e controller (Renesas/NEC µPD720201).
when connected to intel or renesas ports kinect is detected, but in KinectV2ConfigurationVerifier.exe usb marked like warning and working not all the examples,
that works; (two white led lights and 3 reds ) color basic sample, audio sample, infrared, fusion, depth.
that not working; (lights only one white led and 3 reds) body basic sample, body index sample, control basic, coordinate mapping, face.
with renesas used default windows drivers, because if use official renesas driver, then an error - This device cannot start. (Code 10)
as already know that if connected kinect to etron usb3 port when is not supported, it`s clear
what could be the problem with intel and renasas?
thanks

2 USB3 chispets on board? Are you able to confirm which USB3 ports are using the Intel? Review the troubleshooting thread for known issues and common workarounds.
https://social.msdn.microsoft.com/Forums/en-US/20dbadae-dcee-406a-b66f-a182d76cea3b/troubleshooting-and-common-issues-guide?forum=kinectv2sdk
As for the tool crashing, there may be an issue with query the driver and that is where it is failing. We seen a similar issue come up on another thread. If you can run all the samples at 30fps without issue, then you should be fine to ignore.
Carmine Sirignano - MSFT

Intel and g5 using Qmaster

Similar Messages

Maybe you are looking for