Interaction Center scenario: total time when agent is "not ready"

Hi,
I have a requirement to show the total time when an agent is "not ready" in IC. I know an agent is either "ready" (to pick up calls) or "not ready". Any idea which business content handles this?
Thanks!

As thomascollins said, you can build an Agent Management workflow. A couple of comments though.
A lot of our agents have multiple extensions on their phone.  If they are talking on a non queue extension they let the queue extension ring out putting them in a "not Ready" State.
It would be better if the agent went "not ready" immediately they take a call on their non-contact center line to prevent RONA which is not providing your customers with the best possible service. The routing engine will select another available agent. This positive action by the agent will remind them to take the inverse action and make themselves ready when they finish their call on their non-CC line (well, maybe ).
Requested FunctionalityProvide Queue supervisors with an alert through email or another method to let them know that an agent have gone into a "Not Ready" State.
You would not want this alert done immediately - the poor supervisors would get hammered. Perhaps an alert if an agent is in the "not ready" state for more than (say) 5 minutes. Of course, this now means that the not ready state is useless for meetings, short breaks, lunch and so on - and agents would have to logout for those. Not a problem, and logging out is my preferred method. Just making an observation.
Regards,
Geoff

Similar Messages

  • UCCx 8 Callback when agent is in Ready State

    To all,
    I am stuck.  Here is the basic logic for my callback caller script when agent is in Ready state.  After the Get Digit String step, what should I do to terminate the call and keep the script running?
    Select Resource (--Triggering Contct--from CSQ)
              Connected
              Queued
                   Menu
                        CallbackNumber = Get Digit String (--Triggering Contact--)
                                  succesful
                                       If(stat_ReadyResources_OF_CSQ > 0) then
                                                True
                                                   outcallToCaller = Place Call (to callbackNumber)
                                                          successful
                                                                 Call Redirect (--Triggering Contact--to Overflow Q)
    * OverflowQ is another script.
    Thanks,
    Nelson

    Set the contact as still being active, even though no one is there.  You will not be able to play any prompts or anything to that contact though, that will result in errors, unless you catch the error.  You can of course redirect playback to the contact that you call.
    ErrorReason = Get Trigger Info (Aborting Reason)
    On Exception (ContactInactiveException) Goto Begin
    Delay 2 sec
    Accept(--Triggering Contact--)
    Delay 4 sec     <---Hang up before these 4 seconds are done.
    Begin:
    Clear Exception (ContactInactiveException)
    Set Contact Info (--Triggering Contact--)
         Language: strLanguage  (I have a Language varible named this with the value L[en_US] )
         Handled:
         Session: strSession (I have a Session varible named this with the value null )
    I edited this to add the delay and accept steps, so you would know the proper order for them to be in.  I have a script that calls customers and asks if it is ok to fax them documents to that line in the next 5 minutes.  So they know to let the call go to their fax.

  • All agents become not ready Suddenly

    Does any one know what could be the reason why all the agents suddenly become not ready ?
    -Agents state after ring no answer set to : Ready
    -Automatic work and wrap up time disabled.
    -No skills,resource group based queue and circular call distribution.
    -Ip phone agents,no cad.
    What is wrong ? ,
    thanks in advance.

    Hi,
    perhaps the UCCX (or UCCE?) tries to deliver a call to the agent but due to a routing problem (CSS? Codec?) the call never arrived to the phone so the system forced the agent to Not Ready to avoid this situation with the subsequent call.
    Can you please tell us more. Is it UCCX? UCCE? What version? Did you check the logs.
    Thanks.
    G.

  • Why start iCloud drive when Yosemite is not ready? Once accidental start iCloud drive, no downgrade option?

    When IOS8 is release there is a simple switch to start iCloud Drive.  It is a nightmare.  My iWork field can no longer be sync with my Mac and Mac Air.
    There is no downgrade method to resume the usual iCloud support.  Yosemite is not ready now.
    There should be a warning for anyone who may not know the link between iCloud drive and Yosemite.
    Why start iCloud drive when Yosemite is not ready for download?

    Give Apple feedback on this at http://www.apple.com/feedback
    Unfortunately the iOS 8 release was made fully functional even though some of the functions are not useable at this time.  That should have been clearer so the user knew not to activate a function that would not work fully.

  • Interaction center scenario

    Hi ,
    I want to maintain different customer clsses like  A Class customer , B class customer  etc..
    When ever A class customer calls to the Interaction center and if the customer has not paid the last month  bill..System should give alert to the service representative that customer has pending bills to be paid..
    Is there any functionality in SAP CRM to avail this process .
    Thanks in advance ,
    Regards,
    Rahul D

    Hi Pavithra,
    Service Order is the document which is to be created to carry out any service.For example if the service rep has to go to a house and repair washing maching for that service order has to be created.Generally service order contians the service rep details along with the product and installed base detaisl.
    Complaints are to be created when the customer complains about the service/product.Some complains may require to carryout service.In that case complaints will triger service order.This type of complaints are called service ticket.
    Some complaint may be resolved by giving clarification/ refunding etc which doesnot reuire service to be carried out to solve the complaint.In this case there in no need to create service order.
    Hope this clarifies.
    Regards,
    Abdul Raheem S

  • Agent State Display - Can you highlight when an agent is Not Ready

    Hello...
    My customer is looking for a way to highlight when an agent has gone in to the "Not Ready" state...  their preference would be to change the font color to red in the supervisor desktop display in the Agents - Team State section, but they are open to ther ideas as well.  We are currently running UCCx 7.0(1) with CAD/CSD 6.6(1)
    Screen shot of supevisor desktop attached
    Thanks,
    Craig

    I am not sure if highlighting the agents when the state is changed is possible in CSD.
    However I am curious to know why is there a specific need to highlight the agent when you already see the status going to RED from GREEN during not ready state ?
    Regards
    Anuj

  • Agents in not ready state too long drops calls.

    Using CRS 4.0(3) with agent desktop.
    Issue is that when agents go to lunch they go into the not-ready state until they come back from lunch. Upon coming back from lunch, they proceed to go ready and then they start dropping calls as they come into the que.
    If you log out completely and close the application when you leave for lunch versus going not ready for an extended period of time the issue does not appear when you log back in.
    Any ideas?

    Update on this. I looked at the control center and saw that my server was in partial service. I verified the service was the JTAPI subsystem.
    I ran the JTAPI update client tool from this link
    http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a00801c8316.shtml
    and saw the version of JTAPI between the CCM and the IPCC server were off. I updated both IPCC servers to the same version of call manager and will now hold to do some testing.

  • Agent never Not Ready state

    Hi 
    I have a CUCM 8.5 and UCCX 8.5 workingwithout problems, but now the customer wants his agents never stay in state "Not ready" no matter the event, the agent never can stay in not ready state.
    Any idea if i can do this?
    Regards

    OK - you mean not go automatically into work at the end of the call? Disable 'Automatic Work' on the CSQs in AppAdmin.
    If you mean not go automatically into 'not ready' when a call is missed, you can set the 'Agent State after Ring No Answer*' setting to 'Ready', but this is generally a very bad idea.
    Aaron

  • Agent is not ready but appearing ready in cisco agent desktop

    Hi All,
    We are facing issue in IPCC Enterprise 7.2.5, as agent is showing in ready state while he is in not ready state by generating webview "Agent not ready and Agent trace level reports.
    Did any one face this issue earlier?It seems a bug.
    Please see the attachment for further details.
    Regards,
    Muhammad Atif Butt

    Thoughts please

  • Unable to do the restriction at Fund Center or FM Area when FM is not activ

    Hi,
    we have the following business requirement:
    Background of the issue:
    Field Status variant in Account Assignment category and GL:
    We are in the process of rolling out one of our company codes which is
    in a different instance(server).
    We already have some 130+ company codes running in a different
    instance. This is a kind of Instance consolidation to bring all systems
    under one instance.
    Funds Management has been activated in the company code for which we
    are carrying out the rollout. FM has not been activated for the
    existing company codes.
    Now, the issue is with regard to the field status variants, which can
    be controlled at the company code level and which cannot be controlled
    which is at the client level.
    (i)     The existing company codes have a field status variant which
    has the field status groups having the fields Commitment items and
    Funds center in Suppress mode in the existing instance.
    (ii)     The company to be rolled out has the field status variant which
    has field status groups having the fields Commitment items and Funds
    Center in Optional mode.
    (iii)     On the other hand, there is yet another field status control
    for the Account assignment objects like Cost center, WBS elements, etc.
    in the MM-FI integration area. This is at client level and at present
    the same has the status of u201CSuppressu201D for Commitment items and Funds
    Center. We have changed the same to u201COptionalu201D for the purpose of
    testing the proposed roll out in our existing instance.
    In that case, the status of GL account assignment in above is
    clashing with our client level field status as described in (iii)
    above. As a result, we are forced to change the field status in
    above to optional mode for our existing company codes which we do not
    intend to do.
    When only one company within a group of companies is activated with FM,
    I feel that:
    (i)     At the client level, there is no option for me other than to
    keep the Funds center and commitment items in optional mode
    (ii)     At the GL level, I should be able to keep my field status in
    Suppress mode (If FM is not activated) and in Optional mode (If FM is
    activated) and SAP should be able to take care of the clash in the
    field status at the transaction level in such a scenario.
    The issue is we are able to control the access if FM is activated for a particular company code, where as we are unable to control the access for other company codes where FM is not activated and FM Area is not linked.
    We tried to use the BADI ME_PROCESS_REQ_CUST, but this is applicable for POs only.
    Please look into this  issue and help us in meeting our business requirement.
    Thanks & Regards,
    Ramakrishna

    Hi Justin,
    Thanks for the extra points.
    Copy and save this bold text some where
    /Applications/iChat.app/Contents/MacOS/iChat -errorLogLevel 7
    This needs to be run in Terminal.
    iChat needs to be shut down to do so.
    Just paste it in Terminal after the Welcome to Darwin message and hit enter.
    It will launch iChat and create an on-going log in the Terminal window.
    You will see the reference to the Harware rules.plist
    Further down you will see the bandwidth found by iChat, followed by the number of Audio and Video Buddies that you can support.
    It goes on.....
    It makes a note of the router that you are connected to.
    After that it will end up lists listening checks until you connect to a Chat.
    This makes this a useful way to find out what iChat can see at it's startup.
    To Stop - Quit iChat in the Normal way.
    Save the Log in a Text editor of some sort. (Post here if required).
    Then Quit Terminal.
    It is a useful tool to highlight some things in the start up phase, (And a reminder to look in specific places) when you think you have looked at all the settings.
    8:12 PM Wednesday; November 15, 2006

  • IPad dying on me at a time when it's not expected to

    My "new iPad" or iPad 3 has been serving me well, but ever since I upgraded to iOS 7, it seems to be not functioning as well as before. Usually, as with all the times before, the iPad would only shut down on its own when out of juice. Before that warning messages would pop out to tell me that my iPad needs to be charged... But now I guess it is fed up with me ignoring its plea for battery, because it no longer gives me alerts on low battery, nor does it wait till close to 0% before shutting down by itself. The battery level is around 21% and suddenly, the iPad dies on me. :/ Without any prior warning. This has happened since the start of this month. Very frustrating... And when I start charging it the level indicator is red... When it is well over 10%!!! Has anyone else experience the same problem? Is it Apple's fault or just mine?

    You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
    Try again to see if the problem persists.

  • W,indows 7 shuts down at welcome page after a period of time, when user is not logged in.

    I have two users on my computer, when they are both logged out and the computer is at the welcome page, I need the computer to stay on , as I need to remote accsess it.But the computer turns off after a period of time, even though in settings, I have all
    the power setting to never off.
    How do I stop the computer turning it self off, when there is no one logged in, and on the welcome page?
    Thanx.

    Check in BIOS sometimes for hours shut down.
    Is the computer starts then straight without a problem? If you do not check the temperature of the processor.
    Start your computer in safe mode and remove programs that start automatically by MSCONFIG
    Please Mark This As Answer if it helps to solve the issue
    Tzuri Ben Ezra | My Certifications:
    CompTIA A+ ,Microsoft MCP, MCTS, MCSA, MCITP
    |
    FaceBook: Tzuri FaceBook | vCard:
    Tzuri vCard | 
    Microsoft ID:
    Microsoft Transcript 
     |

  • Wifi erratic on 4S after upgrading and not working even after resetting to factory setting. Why should apple isolate itself from their own product problems  Matter of shame when they are not ready to communicate with the customer means they are dead.

    11:22 (7 minutes ago)
    to AppleSupport
    Dear Sir/Madam Since  the wifi is not coming ON how can I open this diagnostic on the iphone  4S am using and having problem with wifi behaving in erratic manner. 
    Am  a professional engineer for projects and am 68 yrs old. At one time was  looking after a production line manufacturing I C's in semiconductors  manufacturing company of the US.
    Have four apple products, one hp laptop and one DELL professional computer at home is used by only two members me and my wife.
    Wife  prefers working on ipad2 or ipad mini while traveling and has iphone 4.  Am using iphone4S with laptop and Dell computer, No apple product is  more than two years old.
    Am having the problem in using wifi on the 4S after it  was upgraded to the latest ios as per the recommendation by your  software of my iphone 4S 
    The wifi card hangs up at  it's own will and even a visit to your authorized service center in  Delhi has not able to help me although they have reverted the ios back  to the
    one supplied with the set. Am a user and not a computer expert but it looks like the wifi card is  not able to some times take the load while working which could indicate  the wifi card is getting heated up.   
    My daughter  who is Masters in 3D Animation is an ardent fan of apple products  working at present in Canada was also gifted by me a 4S about 4 months  back. My daughter-in-law is using iphone4 and an ipad for her professional  works along with a Dell PC in the US. While my son is a fan of samsung  products and does not like an apple product. 
    So in a family we have 7 apple products except MAC laptop/PC. 
    But the fact is, this problem with 4S has  really shaken me up and now it seems your products are deteriorating in  quality while demanding the best pricing structures. 
    Since  this is purely the device and the software of apple problem you may  please replace this set with new one as neither have any time to push  you/ request you after your service centre
    in Delhi told me yesterday this cannot be repaired.   
    The  serial No of my set is DN*****TC0 and was bought from an authorized  dealer and so were the other products from the same dealer in Delhi.  This set is still in showroom condition and
    was never used without a protective cover. 
    Thanks 
    Ashok Dhingra
    D E E Hons B E Tech MBA
    Vasant Kunj Delhi
    <Personal Information Edited by Host>

    11:22 (7 minutes ago)
    to AppleSupport
    Dear Sir/Madam Since  the wifi is not coming ON how can I open this diagnostic on the iphone  4S am using and having problem with wifi behaving in erratic manner. 
    Am  a professional engineer for projects and am 68 yrs old. At one time was  looking after a production line manufacturing I C's in semiconductors  manufacturing company of the US.
    Have four apple products, one hp laptop and one DELL professional computer at home is used by only two members me and my wife.
    Wife  prefers working on ipad2 or ipad mini while traveling and has iphone 4.  Am using iphone4S with laptop and Dell computer, No apple product is  more than two years old.
    Am having the problem in using wifi on the 4S after it  was upgraded to the latest ios as per the recommendation by your  software of my iphone 4S 
    The wifi card hangs up at  it's own will and even a visit to your authorized service center in  Delhi has not able to help me although they have reverted the ios back  to the
    one supplied with the set. Am a user and not a computer expert but it looks like the wifi card is  not able to some times take the load while working which could indicate  the wifi card is getting heated up.   
    My daughter  who is Masters in 3D Animation is an ardent fan of apple products  working at present in Canada was also gifted by me a 4S about 4 months  back. My daughter-in-law is using iphone4 and an ipad for her professional  works along with a Dell PC in the US. While my son is a fan of samsung  products and does not like an apple product. 
    So in a family we have 7 apple products except MAC laptop/PC. 
    But the fact is, this problem with 4S has  really shaken me up and now it seems your products are deteriorating in  quality while demanding the best pricing structures. 
    Since  this is purely the device and the software of apple problem you may  please replace this set with new one as neither have any time to push  you/ request you after your service centre
    in Delhi told me yesterday this cannot be repaired.   
    The  serial No of my set is DN*****TC0 and was bought from an authorized  dealer and so were the other products from the same dealer in Delhi.  This set is still in showroom condition and
    was never used without a protective cover. 
    Thanks 
    Ashok Dhingra
    D E E Hons B E Tech MBA
    Vasant Kunj Delhi
    <Personal Information Edited by Host>

  • Agent is not Ready

    Hi All,
    I developed a wokflow in which i'm assigning an agents which was created in PPOCE. when the workflow is executed it is giving a message in workflow log "No Agent is ready". How to resolve this error.
    Rgds
    Faisal

    Hi Faisal,
                    Check wether u have given Possible agent and responsible agents correctly and also general task, General forwarrding allowed or not. Go to SU01 and check for that user.
    Regards,
    Dheepak

  • I cannot believe that you are being such ******** and FORCING people to download Firefox 5 when it is not ready. You guys ****!!!

    Why the H*** are you forcing us to upgrade to an unfinished version of the browser. I have NEVER known any company or group that made users use a beta version. I may come back to Firefox, but if you keep up with this ****, I'll just stay with Safari or Chrome.

    Sorry, Firefox 4+ versions don't support PPC architecture.
    For older Macs that aren't supported in Firefox 4 / 5 / 6, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
    http://www.floodgap.com/software/tenfourfox/ <br />
    http://code.google.com/p/tenfourfox/downloads/list
    Or use Firefox 3.6.20: <br />
    http://www.mozilla.com/en-US/firefox/all-older.html

Maybe you are looking for