Interesting Issue to be resolved

Friends,
     This is one of the interesting issue which has to be resolved.
A value has been passed from Siebal to SAP-R/3, which is received by a parameter in a R/3 report program.
Based on the value of the parameter, some output has to be displayed.
For receiving the value from Siebal to R/3 we have to type the following Statement in the RUN Command
C:\Progra~1\SAP\FrontEnd\SAPgui\sapshcut.exe -language=EN -system=D47 -client=010 -guiparm="r1p1.kt.kk.com 00"
-type=Transaction -user=MMM5IOB -pw=sridhjjjjjjj -command="ZSRI1 P_SRNO=1-A5001"
The above code gives the R/3 System, Client, IP Address, User ID, Transaction Code & Parameter ID
My Program is having a parameter & a write stmt which is displaying some value based on the parameter option.
A transaction code has been created to the above program.
If we watch the above command, we will be having the transaction code as command & the parameter name as p_srno.
Requirement :
    Once when the command is executed in the Run Option, the transaction is executed and the parameter is passed & on
execution (F8), the value given in the write option is displayed.
    But the actual requirement is the parameter screen should not appear, the value in write should be processed & the
result should be output based on parameter's value.
    If we give the NO-DISPLAY option of parameter, the value is not assigned to the parameter variable.
How to resolve this issue friends?
Regards,
Usha

Hi Usha,
I think this depends on your program behind transaction ZSRI1. How are you calling the program in there? If you're calling a standard transaction, can't you just put a skip first screen there?
I suggest to take a look at this thread as well: Re: Call Transaction and skip first screen
-Mikko

Similar Messages

HT5219 it is frustrating that thunderbolt is not recognized while working in the windows 7 on MacPro - will this issue be ever resolved? if so when?

It is frustrating that thunderbolt is not recognized while working in boot camp windows 7 on MacPro - will this issue be ever resolved? if so when?

I second this question.

Interesting Issue

I am having an interesting issue using 2 spa3102, some grandstream bt200 phones, asterisk and 2 PSTN lines. The 2 spa3102 are setup to send incoming pstn calls to 2 of the bt200s, the PSTN Line does not have call waiting and it has been disabled on spa3102,routed through asterisk and in asterisk also outgoing calls are routed to the ATAs. The interesting thing that happens sometimes is that both lines would be in use and a third call would still beable to come in and ring on any of the bt200s assign for doing this which is not on the phone. When someone hears this ringing and tries to pick up the call using the asterisk *8 it would cut into the call of the person who is currently on the line that the call came in on. The weird thing is like i said the call waiting on both ATA and Line itself has been deisabled. I am not able to replicate this issue and it always seems that when i am not around this happens. Cannot get any logs or debugging info concerning this. I am using asteriskwin32 pbx on a windows xp pc. Has anyone experienced this issue? Any suggestions? Any advise?

Better isolate the cause of the problem. Try using a different SIP server like FWD so as to rule out a possibility that it is your Asterisk server causing it. Why can’t you get any debugs on it? You can just leave the debug running even if you are not around. Lastly, try the latest firmware on the Linksys site.

I have an unlocked iphone 3gs running ios 6.0 currently with straight talk. I was able to get all the functions working except mms.Do you think this issue will be resolved ? I really would like that option on my phone. I have tried everything.

Can't get mms. to work have, tried everything I have found online.ST tells me it's Apples' problem Apple tells me it's STs' problem.Does anyone think this issue will be resolved ? My phone is an Apple unlocked 3gs running ios 6.0 on Straight Talk using atts' towers.

I am having the same problem but cannot get anything but the actual phone to work. I have a unlocked 3GS running 6.0 (what was I thinking?). No data whatsoever, no texting, no visual voicemail. I simply cannot access the APN settings. I have tried sim swap, I have tried APN changers. I have been on the phone with ST tech support for hours and hours. I have tried to get the answers from a "genius". I am stuck and looking at Android devices, but would really like to keep using the iphone with Straight Talk.

Dear sir, i am fully dis-appointed about my above case no : *******. I have face this problem last 9 and half months and still the issue is not resolved. This iPHONE4S purchase from Australia and now i am in india.

Dear sir,
i am fully dis-appointed about my above case no : *******. I have face this problem last 9 and half months and still the issue is not resolved. This iPHONE4S purchase from Australia and now i am in india. Your apple team told that the problem in your device and ready to replace it. But Now what happen they told you must have to send this iPHONE to Australia. But I have checked the courier people is not ready to take this device to australia. I will send it if any body of my relative comes to india but it will take a long time may be 8 to 10 months . I already suffering this problem since last 9 and half months and also for replacement it will take another 10 months. so it will very difficult for me. i request you to please send a new device at my address and i will send you this iPhone 4S return back when my some relative comes to australia.
<Post Edited By Host>

Just a reminder to you. Apple is not here. This is a user forum and the only people here are users like you. Posting the same rant multiple times achieves nothing. Keep it up and your future post will be deleted just like the one that just was.

Hi,I have uploaded an app build for pre release and its still under processing So i uploaded a new build but still the issues is not resolved.Please help...Thanks

Hi,
I have uploaded an app build for pre release and its still under processing So i uploaded a new build but still the issues is not resolved.
Please help...
Thanks

Hi smithin,
Thanks for visiting Apple Support Communities.
It sounds like you've submitted an iOS application to the App Store, which is being processed, but there's an unresolved issue.
For additional help with this situation, Apple Developers can use the contact methods on this page:
https://developer.apple.com/contact/
All the best,
Jeremy

As of Dec 08, is there any news on when iPhone/ATT issues will be resolved?

I've found about a billion posts bashing the iPhone 3G, but most of the content and articles are rather outdated. So, it's December 1st and I'm considering getting an iPhone later this month. The 2.1 came out a while back, and 2.2 has now been out for a while...
-Has there been any improvements with the 3G service?
-Has there been any improvements with the battery life and how many hours do you typically get out of 1 charge?
-Does it still have issues with dropping calls / txt messages?
-Are people still replacing SIM cards as a potential fix for issues or will a new SIM card that comes with it be no different than a replacement card?
I'd like to hear experiences good and bad, and if you're in the East Bay (Northern CA), tell me how the coverage has been for you, or even the Bay Area in general. I'm hoping to hear people who have purchased iPhones in the last month or so have had a better experience, but from what I've read so far I'm not sure if that's the case.
Thanks

good luck... it's a "depends" kinda answer you'll receive from the masses. Personally, I went from R2.0 in July to R2.0.2 before experiencing any issues at all with my 3G iPhone... wondering why there were people out there with so many issues. I've since learned the past two upgrades. Simple answer... I'd wait!! Especially if you're not hooked yet by having used someone else's. I feel AT&T connectivity is poor right now trying to get a robust enough 3G network up and running to handle the volume of user's and "forget" their claim to having more "bar's". I live in a dark orange and blue coverage area and reception is inconsistent. If you want to read my specifics, read on....
My issues have been:
1. GPS accuracy... corrected in R2.1
2. Dropped call's from "day 1" more dropped call's on AT&T the first three days in my local area than I have 7-yr's traveling nationwide on business with Verizon (I believe AT&T holds 80% responsibility for this). Just had two today in a dark orange coverage area in my home
3. 3G is intermittent to say the least. I live 3-miles from the closest 3g tower and my svc will vary from No Svc to 5-bars (note: 3G connectivity depends on the number of users on a tower at the same time; therefore, you will watch your connectivity/signal strength vacillate in a matter or seconds or minutes with no consistency) When in strong 3G area's the iPhone will sing...
4. about a month ago they started having FETCH issues on the iPhone where it would not accurately go out and pull emails in from your ISP... my experience was up to 45-60 min after a FETCH setting of 15-min. and "audible" notifications of emails arriving wasn't happening and my volumes are always at max setting. This was seemingly resolved with R2.2 10-days ago and just today it started acting up to where I am no longer receiving audible alerts to emails coming... and FETCH seems to work only 75% of the time. Good news is that when it does act up, the emails seem to arrive earlier than the set FETCH intervals.
Biggest issues I have is lack of any real consistency of the above... I went to Verizon this past weekend to play with the new "Storm" and was really disappointed with its poor intuitiveness and poor ease of navigation. It may have great features and may work 100% of the time, but if I have to waste time navigating my way around it, I might as well keep my iPhone. I really do like my iPhone when it works, but the only way I would abandon it now is if I could exit my contract without penalties to AT&T and even then I know I would miss it. It reminds me of the early days and headaches of cable TV with all its glitches... If your not on AT&T and can hold off a little longer on the iPhone, I can almost guarantee with all the missing features requiring hardware changes and required bug fixes that APPLE will have to release a new generation iPhone... I even heard rumor that there is an iPhone in the works that has a slide keyboard coming out... not that I would be interested in that feature, adding bulk to it. but point being APPLE will cannibalize this current generation iPhone for another in the next 10-months.

IPhone 5S Call quality issues - Are they resolved?

Hi folks,
So long story short, I was previously a VZW customer with an iPhone 5S. When I was a customer, everything worked great, except one thing, Calls.
What would happen during is:
1) The calls would sound metallic/robotic
2) the calls would sort of go in and out (for example I would hear: " Yeah ... Fun at... Saturday)
(Both 1 and 2 would happen indoors and outdoors)
3) Calls would drop
So like any reasonable person, I called into Customer Service and was offered a Network Extender for $199. This did help indoors for the most part, but not outside (like literally outside my building; out of range perhaps?)
I read of others having the same issues here, so I knew I wasn't alone, but there was just no solution to the problem. I thought it was my iPhone at first. However, I ported out to AT&T and the calls were crystal clear compared to VZW. So that kinda confirmed it's not my phone.
My zip code is 10453 (and this area has great coverage according to the coverage map, but I couldn't get any more than 3 bars of LTE outside and 1-2 indoors). My question is, has this issue been resolved? If so how can I improve it? Honestly looking forward to being a VZW customer again, despite no simultaneous talk and surf on the iPhone.
Thanks for any comments/solutions offered!

When the person called me, I was indoors. I am the one with the ATT phone (wanting to switch to vzw) and never get this issue, not even when Sprint callers call me. The person who called me was outdoors and he has Verizon (zip: 10023)
The call was very choppy with the voice cutting in and out on his end, and the call was slightly metallic sounding. I could barely understand a word he was saying. The quality was exactly the same when I was with Verizon. At first I thought it was my phone, and now this confirms it never was my phone. I am truly convinced this is a notice cancellation issue with verizon because like I said, I never get this issue when Sprint users call me. It doesn't really matter who initiates the call, the quality is always the same, horrible.
I really want to be part of VZ but I can't if I am to expect these issues! please help. I don't know if it's congestion or just the call coding itself.

Inventory Extraction - Issues till not Resolved!!

Hi Gurus,
I have couple of questions here regarding Inventory extraction, and I will ask one by one:
1. I have a requirement to develop a report called " Stock Ledger Report " where the KPI's would be Quantity, Cost & Retail Price. The 2 KPI's Quantity & Costs are straightforward and the data for these come from MSEG-MENGE & MSEG-DMBTR respectively. Retail Price is a bit complex since it is dependent on time and my client being a retail one their prices are subjected to change according to time. This is being calculated from different tables in the R/3 side so it's pretty clear that I have to add a custom field to my extractor.
Now my Question is, to which data source should I add the custom field, will it be 2lis_03_bx or 2lis_03_bf?
2. I started the extraction sometime back for 2lis_03_bx since that has to be extracted first, but I am getting a runtime error that says:
Short Text
Too many parameters specified with PERFORM.
What happened?
In a subroutine call, there were more parameters than in the
routine definition.
Error in ABAP application program.
The current ABAP program "SAPLMCB1" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class
'CX_SY_DYN_CALL_PARAM_NOT_FOUND', was neither
caught nor passed along using a RAISING clause, in the procedure "UPDATE_CALL"
"(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
A PERFORM was used to call the routine "F0001_UPDATE" of the program
"RMCSA278".
This routine contains 4 formal parameters, but the current call
contains 5 actual parameters.
parameters.
The first thing I did was to check for the OSS notes 315880 and 353042 that have to be installed in the R/3 system to perform the data loading. I got this from the SAP White paper, How to handle Inventory scenarios in BW.
I didn't find these notes in my R/3 system here, so I searched for these nodes in market place. The first note didn't make much sense to me where as the 2nd note was about how to activate the transaction key (PROCESSKEY).
According to what was mentioned in market place, in order to work with the Inventory extractors I have to activate the determination of the PROCESS KEY. So how do I know which PROCESS KEY corresponds to my requirement ? I could see all the process keys in the Transaction key maintainence for BW in SBIW.
My Question is if these 2 OSS notes are installed. will the issues be resolved ??...Also is it possible to proceed and resolve the above issues without istalling the 2 OSS Notes.
Thanks,
Guru.

Hey Brian,
Sorry I mistook your reply, am stuck with too much of work buddy, working on Inventory scenarios as well as POS DM too....your answers sounds cool. I will definitely try that once am done with the issue of running the setup tables and actually I think you suggestion would definitely work in my scenario since my client s a retail client and their prices change with time.
Can you also tell answer me with regard to my 2nd question.
Thank you so much
Guru.

Power on issues- HP service resolved

For about a year now I've been having an intermittent problem with my e9250t Pavilion not always booting to Windows after a cold start. Sometimes the computer would start fine, and once in a while it would hang at POST, but the majority of my experiences were the computer hanging at the HP logo screen and never booting Windows. Shutting off the PC and turning it back on two or three times was usually required to get to Windows. There was a simple work around for this problem: i rarely turned the computer off and used sleep mode when I did. Other than this issue, this PC has worked flawlessly for me. My extended warranty expires in a few months, so I decided to see if HP Tech Support could diagnose my problem. I spent a couple of hours on the phone with a very helpful agent but we failed to identify the problem. HP called me back several times over the next few days with a few other ideas to try but nothing resolved the issue.
My warranty called for in home repair, but because the specific problem couldn't be identified, they wanted me to ship the PC to their service center. They sent a sturdy box and packing material and paid for 2nd day air service both ways. They sent e-mails when the computer arrived and a two week suggested return date. Two days later, another e-mail reported the computer had been repaired and was on its way back. It was gone just 8 days. The problem turns out to have been the nVidia 220 video card. They replaced the card and updated the BIOS. And much to my delight, they did not do a factory reset. The computer now turns on perfectly.
I thought it was important to share a positive tech support experience.

Hello lagrena,
Welcome to the HP Consumer Support Community.
This is a peer-to-peer community for customers to connect and share solutions regarding their HP products. It is not a venue to contact HP directly. If you have additional or direct feedback for HP about their products or services, please use the link below for alternate contacts.
http://www8.hp.com/us/en/hp-information/summary/ww-contact-us.html
If you have other questions and concerns about using the forum, please feel free to send me a private message.
Thank you.
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
Rules of Participation

DNS Issue - Unable to resolve Hostname until IPConfig /flushdns and ipconfig /registerdns is done.

We are having a random issue, that at first was limited to our Windows 7 x64 boxes, but now is appearing in our x32 bit boxes.
Network Setup -> we are running Active Directory 2008 in Native. Our DHCP scope is setup to hand out the DNS addresses to all clients, and is working.
What happens to an impacted client.
They will be working, and able to browse/connect to services with in/out our network. Then for some reason they will go to a page like -> intranet.ourcompanyname.net. IE will advise it cannot open the page.
1)If we ping either just intranet or the FQDN - it will advise host cannot be found.
2)However if we do an nslookup on the same client - nslookup will return the IP of the Corresponding FQDN.
3)We have to perform a ipconfig /flushdns and a ipconfig /registerdns on the the client.
4)Once that is done, the client machine can again connect to the FQDN
The only FQDN's that are impacted by this are ALL Internal. Example - they never lose the ability to resolve something like
www.google.ca, etc. It also usually impacts just one internal FQDN - so they may lose the ability to resolve the Intranet, but another internal website on the same server and/or another application (like email) will
continue to work fine.
I really am at a loss as to why. DNS is working properly at the Server Level.

Hi,
It may be caused by DNS cache pollution. To verify this, please run "ipconfig /displaydns > C:\dnscache.txt" command, then check if there is a wrong cache of "intranet.ourcompanyname.net" in the dnscache.txt
file.
To find out where does the wrong cache come from, please run "ipconfig /all" command, then check if there is a unexpected DNS server configured.
If the DNS configuration is correct in the client side, please try to perform a network capture on the client. It can tell us where does the wrong cache come from.
Best Regards.
Steven Lee
TechNet Community Support

Hi Gurus .. Cycle count issue unable to resolve

Hi Guys,
I m facing problem with the transaction MICN, report is RM07ICN1
This report works absolutely fine for "C" type indicators.(time interval is 2 years)
But when we try to run thw report for "B" type indicators(time interval is 1 year), I get incorrect outputs.
I have checked the table , so per day it should output 27 materials to be checked, but I get sometimes more than 1000 materials sometimes 50, sometimes 10 .
I cant resolve this issue .. The diffrence between the two indicators is the time interval.
Please help me out of this .

From what I can understand about your question you are on the wrong forum. Try an HTML and/or JavaScript forum.

TTIMDB Connection issues: Can't resolve a non-optional query descriptor property [DSN]

Hi there,
We currently have the 11g TTIMDB plugin deployed in our EM10g instance without issue and looking to migrate to 12c. We've installed/deployed the 12.1.0.2.0 plugin into our EM12c instance and deployed it to 12cR3 agent on our TTIMDB dev server.
When adding the TTIMDB target in the same manner it's deployed in 10g, the connection tested fine to the DB however the target is showing down with the following errors.....
1. Under Monitoring > All Metrics we get this... "The TimesTen database is down: [data source/db name] is not loaded"
2. Under Target Setup > Monitoring Configuration we test the connection, and though testing the connection when first configuring the plugin worked fine it's now failing... "
Response;Can't resolve a non-optional query descriptor property [DSN] (DSN)"
Any thoughts on what may be causing these errors?
Thanks,
Steve

Maybe you are confusing the main daemon running (TimesTen instance is up) with a specific database being up? When you install TimesTen you create a TimesTen 'instance'. This instance has several daemon components the most critical of which is the main daemon. When the main daemon is running the instance is 'up' and when the main daemon is not running the instance is 'down'. An instance may manage several distinct databases concurrently and those may each be up (in memory) or down (not in memory) independently of each other. In order for anything meaningful to happen within an instance the instance must be up.
The default behaviour for TimesTen is to load a database into memory when something connects to it, to maintain it in memory while there are open connections and to unload it from memory when the last connection is closed. This can be useful for development and testing environments but is not necessarily the best choice for production environments. Generally, in a production environment, you should set the database(s) to 'manual' ramPolicy:
ttAdmin -ramPolicy manual DSN
then you can explicitly load the database into memory (i.e. start up the database):
ttAdmin -ramLoad DSN
and, when all connections have been close, you can explicitly shut it down:
ttAdmin -ramUnload DSN
Many customers find this a better way to manage production databases than the default behaviour.
Chris

Interesting issue - Help! Some App downloads only work in some areas!

When I am on my home or work wireless network all of my apps including email and TV Guide and about 10 news apps all download perfectly.
When I am at the local airport on their free internet, all my news apps work fine (NY Times, Blastr, Dvice, Pulse, TUAW, Weather Bug, IMDB, etc) and refresh as they should. I even streamed the "Dark Knight" movie app which plays the first 5 minutes of the movie free (then it's 9.99 for the rest!) and it played as it should.
However, my TV Guide app AND my AOL email won't load. Ever. I've tried this many times. BUT my Safari works and goes to any website. (I guess I should try to load my email directly from a Safari page - never thought of that till now)
TV Guide just spins the little fuzzy circle and says "Loading" until I get a "Network timed out" message.
Email just sits on a blank screen and also says "Loading" and then it times out as well.
(PS - the "Ad" banner at the top of the TV Guide app runs!)
Interestingly enough, the exact same thing happens on my iTouch and my iPhone with the same apps!!
The only thing I could even possibly fathom is that there is some kind of bandwidth issue???
Any clues?

Most likely the problem is that some IP addresses and/or ports are being blocked by the network sources you are referring to. It has nothing to do with the devices you are using. Contact the provider of the "free" WiFi to see what the restrictions are.

LSO- Interesting issue

Hi
Without starting the course, if a participant clicks on u2018confirm participationu2019 system is setting the course completed and system is not giving the pass status even if the participant continued and achieved the required marks. This is happening for web based courses and online tests.
Is this a system bug. How to resolve this problem. Can you help me please.

Hi Ravi,
The content which we are using is authored using SAP authoring environment. In SPRO the followup participation is configured as SAP document suggest. Ironically in the even of the participant is pass or fail (completion ciretia is set to 100% for pass) confirm participation is shown in the learning portal page once the content player is closed.
In SAP 603 I can see a BADI LSO_EBO if I activate/implement this BADI will this solve my issue?
Any suggestion/hint would be of great help.
Thanks
S

Interesting Issue to be resolved

Similar Messages

Maybe you are looking for