Internal Addresses  - BP Address for Org Unit representing a Company Code

Dear All
We are on SRM Server 5.5 and are experiencing an annoying issue. It might be standard, but I do not recall having the problem earlier on, at other customers.
The internal address of BP ## representing a company code, automatically gets Name1 filled out with the Object Name in the Org structure (Typically Company name).
This is ok, but what we see is that Name 2 is also filled out with this name. This gives us an issue when printing the PO in the backend system (classic scenario) as the  PO will have both Name1 and Name2 printed as delivery address.
We have tried to change the address in BP, which works ok - until someone makes a change in the org structure, then the BP address is updated again!
Can anyone enlighten me whether this is standard functionality or what? And if is there anyway of mitigating this behavior?
Best Regards, and thanks in advance
;O)
Maria

Dear all,
five years later, but we have currently the same problem as Maria described.
In my company, we are filling the fields SHORT and STEXT of the structure P1000 (transaction PPOMA_BBP) with more or less technical names or terms.
So far, that was working very well.
But in the future, we need to use the fields NAME_ORG1 and NAME_ORG2 of the transparent table BUT000 as the first two fields of the delivery address.
That leads to the situation that technical term/names are used in the delivery address, which is not realy beautiful.
We cannot enter the correct delivery data into the fields SHORT and STEXT in the PPOMA_BBP, because the fields have not enough spaces.
Do you have any ideas how we can solve this issue?
Kind regards
Ignatius

Similar Messages

  • Search help for org units

    Hi,
    I'm looking for a tree search help for org units without organisational controls.
    Actually I'm using the search help 'RH_TYPE_STRUC_HELP' but the units are only the units directed by the user. For one of the specific infotype, I need to let the user select an unit that is not in his own structure... to save an information like "I don't want to work here".
    Have you got some function that can help me ??
    Thanks,
    Christophe.

    Hi
      I want to know only the parent org units existed at company code level or Personnel area level for the position search hlep and not the org units and positions relationship

  • Organization unit assign to company code

    I have created 2 org unit in same company code . I now want to move one org unit to an entire new company code .
    How can this be done . please elaborate .

    Hi,
    I am not sure if you mean account assignments but have a look at PO10 transaction and select your organisational unit and choose infotype 1008 (Acct. Assignment Features). There you can link organisational unit and company code.
    Regards, Saku

  • Multi Languages for Org Unit

    Hi experts,
    Is it possible to have 2 sets of language for abbr and name in IT1000 for org unit in the same period?
    example:
    Start Date : 01.01.2008
    Language: English
    Abbr: HR
    Name: HR department
    Start Date : 01.01.2008
    Language: Chinese
    Abbr: HR
    Name: HR department (Chinese)
    Regards,
    Joanna

    Hi,
    It is possible.
    But before that need to chk with basis guys whether unicoding is enabled or not.
    If Yes the chk chineese script is enabled or not.
    If yes then maintain the orgunits in english language by entering SAP in English language (U can find the language seletion field in log in screen).
    Upload the orgunits. then go to Tcode RE_RHTRANS0 to put the names in Chineese.
    This is one option.
    2nd option is prepare the excel sheet with Chineese language with orgunit keys. Log in into SAP in Chineese language.
    Upload the data.
    ~BiSu

  • Screen or Report that shows all Responsibilities for Org Unit

    How can we find out in Oracle application from the front end,,,, the screens... or may be report that shows all responsibilities for ORG Unit ‘Vision Operation’ (204).
    SELECT FR.RESPONSIBILITY_NAME, FPOV.PROFILE_OPTION_VALUE ORGID, NAME ORG_NAME
    FROM FND_PROFILE_OPTIONS FPO,
    FND_PROFILE_OPTION_VALUES FPOV,
    FND_RESPONSIBILITY_TL FR,
    HR_ALL_ORGANIZATION_UNITS HOU
    --HR_OPERATING_UNITS HOU
    WHERE --UPPER (FPO.PROFILE_OPTION_NAME) LIKE UPPER ('MO%OPERATIN%')
    PROFILE_OPTION_NAME = 'ORG_ID'
    AND FPO.PROFILE_OPTION_ID = FPOV.PROFILE_OPTION_ID
    AND FPOV.LEVEL_VALUE = FR.RESPONSIBILITY_ID
    AND HOU.ORGANIZATION_ID = FPOV.PROFILE_OPTION_VALUE
    the above query displays the data from the backend,,I want to see how to see that data from the front end,, does anyone know the navigation, thank you so much in advance.

    Hello Kashif,
    Thank you for the reply. So, there is no screen that shows all the responsibilities that are assigned to a operating unit.
    The link that you provided really did not give any information that i was looking for.
    And as you said .. "there is no specific screen to show all except responsibilities form".... what does the responsibilities form show,
    I have also tried to look in the System Administrator -> Profile -> System
    and in the Responsibility, I query for Payables manager, and look which Orgs are assigned to it, I am not able to find it. I know I am wrong, but can you please help me how to see which responsiblity is assigned to which Operating Unit.
    Thank you

  • CRMD_BUS2000108 - organizational unit and attributes for org. unit

    Hi all!
    As I'm customizing Lead creation (and in a second step lead generation)
    I would like to receive tips about "selection of organizational unit and attributes for org. unit".
    I expected that, by entering a BP number of a prospect or sold-to party, the organizational unit and its attributes would be displayed automatically on the tab "organization".
    This is not the case. When I start the lead creation, there is a pop-up screen inviting me to choose the organizational unit. afterwards a pop-up screen for the attributes of the org unit. Only after setting a flag in both pop-ups, I see the actual "lead" transaction. When I enter a BP number, the sales assistant and sales rep are found automatically.
    Could anybody please explain how to change the customizing?
    I would like to see the lead transaction (create) first, enter a bp number and than have the org unit and its attributes, the sales rep and sales assistant found automatically.
    Any usefull answer (would make my day ), will be rewarded.
    Thank you very much for your suggestions and time in advance!
    I. Van Acker

    hi
    this is happening because you have not done the org data determination in your transaction,just go to SPRO and there in org data determination ,you have many standard ORGMAN rules available which you can use which will pick the data according to the user ,BPs etc.
    it will enable you to first give BP and then the org data will be driven automatically from the system according to the rule in org data determination.
    so first go and use rule ,try using rule ORGMAN_12
    then attach this rule to the org data profile and then add this org data profile to the transaction in basic settings in transaction where you have defined your lead transaction.
    it will solve your purpose
    best regards
    ashish

  • HOW TO GIVE EXTERNAL NUMBER FOR ORG UNIT

    HOW TO GIVE EXTERNAL NUMBER FOR ORG UNIT
    Regards,
    Kumar

    HAI..
    External number assignment
    If you want the user to assign the numbers, enter "EX" in the 'NR' field. The number ranges are then indicated by the letters "EX".
    Number assignment for plan version 10 / object type S: Subgroup 10S

  • Remove Actions for Org Unit & Positiin in Succession Planning.

    Hi,
    We are in process of implementing Nakisa 3.0 SP1.
    In succession planning, we want to remove few actions for org units & position. I tried to look for the configuration of the same in admin console in detailed configuration for my positions & my org units, but could not find it. Please help.
    Thanks
    Prashant

    Hi Prashant,
    Do you mean the items in the Actions drop-down menu on the OrgUnit/Positions details panels? This cannot be done in the AdminConsole. You need to go to the <build>\AppResource\linkconfiguration folder and copy the files you want to change to <build>\.detla\AppResource\linkconfiguration folder and then change them.
    I believe the files you want are SAPOrgUnitDetailsConfiguration.xml and SAPPositionDetailsConfiguration.xml. Just delete or comment out the lines for the actions you want to remove.
    Best regards,
    Luke

  • No entries for org unit, job or position in T5KWB

    Hi Experts,
    I am running payroll for canada , i am getting this error for 2 employees for whom the org assignment been chaged recently -
    now they are giving , kindly help me - i have checked this table T5KWB and it dosnet hold value maintained for org unit
    50737186
    KTXDM Canadian Tax Infotypes Data Management
    Input
    P0461
    P0462
    P0463
    P0464
    Processing
    No entries for org unit, job or position in T5KWB
    Search in organization structure failed
    Check T5KWB for org unit 50737186 or higher-level org unit for 20101031
    Thanks
    Jay

    Hi Jay
    Get the position of the employees for whom you are getting the error message and maintain infotype "Canada Groups for WCB" for those positions. This should solve your issue.
    You may want to go through below link:
    http://wiki.sdn.sap.com/wiki/display/ERPHCM/WCB
    Hope this helps
    Best Regards
    Reddy

  • Infotype for org.unit

    hallow
    i wont to buield infotype for org.unit
    i thihnk i have to use ppci or ppcj but i dont now how
    please help
    regards

    Hi Antonio,
    Why you want to separetly create Infotype for Organizational Units???
    Once you create them through simple maintainince by default 1000 & 1001 will be maintained. If you create Org Unit through Expert Mode you need to maintain them mannually. And select from the Infotype Menu which ever Infotype you want to maintain.
    Regards
    Pavani
    <b>Remainder: Points to be given on Answers</b>

  • The bp id for org unit does not exist

    Dear expert,
    after transport the org structure from dev to qty system , we found the bp id for org unit does not exist in qty system.
    in ppoma_crm, we can see there is a bp id assigned to the org unit. however, when use tcode 'bp' to check the bp id, the system can not fould a valid id.
    what can we do to solve the issue?
    will there any impact if we keep no bp id for the org unit?

    Hi,
    You can use the transaction CRM_OM_BP_INTEGRATE.
    Select the Org unit and enter the org id in the input field and execute it.
    Select the org unit from the result list and click on the button Start Repair. This will create a BP without errors for the respective org unit.
    Regards,
    PP

  • BP number is missing for org units in org model

    Hi Guys,
    I have created org model in PPOCA_CRM and saved it CRM7.0. But BP numbers did not get generated for org units which I have created.
    Can any one suggest me what is the reason and what needs to be done in order to get BP numbers for already created org units in PPOCA_ CRM or PPOMA_CRM.
    Thanks for you help,
    JM

    Go to CRM IMG->Cross Application components->SAP Business partner->Business Partner->Number Ranges and Groupings->Define Groupings and Assign number ranges.
    There check if any number range is defined with the "Int Std grouping" . If it is not define it.
    and in SM30 for "T77S0" for entries HRALX/OSUBG assign a number range.

  • Actions for Org.Units, Jobs and Positions

    Dear All,
    I know how to create or copy the available actions for Org Units , Jobs and positions thro' the table T777M and run them through PP03.
    Once I do it , when I want to skip some of the relationships it doesnt allow me to , the next page tab is grayed out.
    I mean if we have for ex. a position reporting to a position and because he is, say CEO and I want to skip that relationship I am unable to , how to activate the skip or Next page tab ??
    Regards
    Uday

    Hi,
    Goto table T77IV click on maintain, Click on New Entries >> Enter the subgroup ( PVOB) PV - Plan Verson and OB is for Object you want to maintain the number ranges for eg : 01C for Job. >> Enter and save the record...
    It will take u to the next screen  >> Click on maintain intervals >> Click on Add Intervals >> New screen will appear ... enter the details as below :
    NO    From Number   To Number     Remarks
    01      1                     19999999        This is Object range
    Note : do not enter anything in "Current Number" &  Do not select "Ext"
    I hope this will help you....
    regards,
    Navinkumar

  • Automatically clear the open items for a GL account cross company codes

    Hi FICO experts,
    Can anyone help me on the following issue urgently?
    There are journal entries posted to same GL account with different company code. Is there any way to automatically clear the open items sitting in the GL account in company code A to against the open items for the same GL account in company code B.
    The example is below:
    Journal in company code A
    Dr. 840410      $100
      Cr. 111300       $100
    Journal in company code B
    Dr. 111301   $100
      Cr. 840410      $100
    Now I want to automatically clear account  840410 by using assignment or text in the journal entry.
    It will be highly appreciated for any instructions.
    Adele

    Hello Adele Wang,
    You can enter cross-company code transactions in one step in the General Ledger, Accounts Receivable, and Accounts Payable application components. This function would be used, for example, for centralized procurement or payment.
    Integration:For centralized payments, each individual company code enters its own invoices separately, while a central company code pays them. When you are clearing open items, the system makes clearing entries between the company codes participating in the clearing procedure. These clearing entries represent the receivables and payables that exist between the company codes in centralized payment.
    Prerequisites:You have specified which company codes are to be processed via a single company code. In this specification, you can distinguish between clearing transactions. You can therefore have different combinations of company codes for incoming and outgoing payments.
    You have specified the clearing accounts that record the receivables and payables between the individual company codes. The system posts to these accounts automatically when clearing the open items.
    You need to make  the required settings in the activity Prepare Cross-Company Code Manual Payments in Customizing for Financial Accounting (Accounts Receivable and Accounts Payable->Business Transactions->Outgoing Payments->Manual Outgoing Payments).
    Features:For each company code, the system generates a separate clearing document. A joint transaction number marks these documents as belonging together.
    Example:For a clearing transaction (incoming payment, outgoing payment), you have agreed in Customizing that if company code 0001 is specified, open items are also selected from other company codes (0002 and 0003).
    Hope I had been able to help you. Please assign points.
    Rgds
    manish
    Clearing can then also be carried out if the account to be cleared has not been created in company code 0001. As long as no items have to be posted to this account in company code 0001, it is not necessary to create a master record for the account in company code 0001.
    See also:

  • Need new description for Data Element based on Company Code.

    Hi,
    Requirement: The data element AUFNR which has the description "Order Number" needs to have description as "Engagement Number" for a specific company code. All other company codes to retain the description "Order Number".
    Example: There are three company codes: AAAA, BBBB and CCCC. The company code CCCC wants the description of data element: AUFNR as "Engagement Number" while AAAA and BBBB wants to retain the standard description: "Order Number".
    Pre-Work: Before posting this question, i did search however have not found a solution for this.
    In SAP i tried to create an Implicit Enhancement at:
    Program: RADBTDDF
    Sub Routine: SE_DD04T_ROLLNAME_ROLLNAME
    However, as the program is SAP Basis program, i was not successful.
    Any hints are appreciated and solution is rewarded.
    Thanks for your time.
    With Regards,
    Goutham.

    Dear Matthew,
    Thank you for the reply.
    I am giving some more details into the requirement.
    If a user assigned to company code: CCCC (may not be directly, relationship will be drawn) has logged into the SAP system. If he opens the transaction related to Internal Order, like KO01, KO02, KO03 etc. He should be able to see the description of field: "Order Type" as "Engagement Type".
    Similarly in the next screen the field "Order" needs to be displayed as "Engagement Number".
    However, for users who belong to company codes: AAAA and BBBB the SAP Standard Descriptions will be shown.
    Please let me know if this is possible or any inputs in that direction are highly appreciated.
    Let me know if further details are required.
    Best Regards,
    Goutham.
    P.S: As far as i know, Anees Jawad proposal would work if it is required to change the description at the system level.

Maybe you are looking for