Internal change after Release

Hi
Scenario
We are using internal order (Investment) for capital budgeting.
We have created two roles a)Z_FI_IOCREATION for order creation, change
and display and b)Z_FI_IORELEASE exclusively for releasing the order.
End users create the order and their HOD's release the oders.
Requirement
End users can change the order n number of times but only before
Release of the order.
After release of Order if the order is changed by end user the orders
should be available for Release again. This way we contol the change of
orders after approval. How this can be addressed.
Regards
Ganesh

Hi,
Try whether you do not give authroization for change of Internal Order through transaction code KO02.
Trust this helps much!
Cheers!

Similar Messages

Po header change after release

Dear All
We require list of PO for last one month PO header or tiem level text has been changed after release
Regards
Dishant

Hi,
You can use the following report to get you all the changes in PO. Ask your ABAP person to run it for you.
http://www.sap-img.com/mm001.htm
It is an ABAP program contributed by one of the SAP members, which reports all the changes made in PO and list out the details per document.
Hope it helps,
Best regards
Amit Bakshi

Purchase order changes after release

Hi,
How can I block a purchase order to any changes after release it and then, in case of need, mark for deletion the purchase order itens?
Regards,
Maria

Hi,
To block any changes in the purchase order to after release, set Changeability indicator as 1 for Release ID "R" in following path & save.:
SPRO ->MM - Purchasing -> PO -> Rlease Procedure for PO -> Define Release for PO -> Release Indicator
NOTE:If you set Changeability indicator as 3, PO can be changed after release and trigger a new release strategy based on value changes.
Regards,
Biju K

PR quantity change after Release

Hi Friends,
I am unable to change PR Quantity after release of PR. Please suggest..
Regards,

hi,
When you set up the release strategy there is an indicator for the changability, which states that whether you wanna make the further changes in the PR doc, once it is released...
So, if you wanna allow the changability for the PR docs, then you can use the any of the indicator among 4, 5 , 6 as per your req....
by this you shd be able to make changes...
Regards
Priyanka.P

Po change after release and printout

Dear Experts,
My client require if we change the PO in any field ( expect qty and amount ) our po should be go in the po release again we using release indicator 4 and 6 but we want release should be go if we change any field like date tax code text payment terms etc.
RCR

Hi,
System determines new release strategy only if there are any changes in the characteristic values in the PO. (The characteristics that you must have defined for the PO release strategy configured in your case, like PO value, document type, Plant, etc.)
By your question, it appears that you do not want to change even the date and text fields after PO is released, and in case you do the changes, then again the PO has to be released.
For this, you need to use the release indicator, which won't allow any changes after PO is final released. Hence, when any of the field is required to be changed, the release will be required to be cancelled first, then the changes can be done. After doing the necessary changes in your fields, like, date, text, etc., PO will again be subjected to release, and will have to be released again to proceed further.
Regards,
Zafar.

Project Definition should not change after releasing

Hi SAP Gurus,
Could anyone please throw some light on the method to disable project definiton field from changing after it has been released..

Hi,
Master data lock can be used with reference to the object selected, by going to editstatus-Lock----- master data, by selecting this, all the data (like fields present with respect that object, excluding cost planning, budgeting, account assignment) pertaining to the object will be locked and you wouldn't be able to make changes to those fields.
Now, coming to automating of this lock can be done through using user status, when you set that user status, all the master data will locked.
Regards
Avisek Bhardwaj

PO change after Release

Dear All,
One our client wants after release of the PO (we have only 1 level), system should not allow to chage the PO.will it possible?
Regards
venu gopal

hi
use shortcut as
OLME>Purchase Order>Release Procedure for Purchase Orders>Define Release Procedure for Purchase Orders>Release indicator-->maintain 1 in 3rd column
Vishal...

PR Field change after release completion

Hi,
We have a PR release strategy with Doc type and $ as 2 charesterestics. I have assigned X - Block and 2- RFQ/purchase order as release Indicators. 2 - has FZ01 and "Blank" as changeabil.
The question is, User want to lock "Cost Center" field in accoun assignment tab. Or they want to reverse release strategy in case of "Cost Center" change.
There is no field in FZ01 to control.(We does not have any WorkFlow)
Any idea will be appreciated.
Thanks in advance,
Vamsi.

Hi
Create a release indicator with the released for PO, RFQ checked and changeability as 1=cannot be changed and assign it to ur release strategy after rlease.
If u want a new release strategy after costcenter change then cost centre should be one of the characteristics it the release strategy.
The first option would be the best one for you.
Check and revert
Reg
Raja

Keeping menu change after release

Hi, I did the tutorial for an advanced website:
http://www.flashvault.net/default.asp?ID=21
and applied it to my own design. However, I would like to make the following change: when a certain page is loaded (home, about me, contacts), I want the menu button to remain highlighted (black tint and underlined) as long as the page shows, so the user knows at any time where (s)he is by looking at the menu buttons. At the moment, the highlighting action (black tint on text and underline) on the menu buttons happens only on mouse release, but does not stay.
Thanks a lot. I'm attaching the fla files.

Ned, I am almost there but need a little help for the last bit. On the invisible buttons (which control the movie clips with the actual menu animations), I put the following code (example is for "home" button):
on (rollOver) {
_root.menu_mc.home_mc.gotoAndPlay ("goh1");
on (rollOut) {
_root.menu_mc.home_mc.gotoAndPlay("goh2");
on (release) {
homebutton.enabled = false;
servicesbutton.enabled = true;
portfoliobutton.enabled = true;
aboutbutton.enabled = true;
contactbutton.enabled = true;
_root.play();
_root.choose = "home";
The "home" button is locked and maintaines its animated state (Hooray!!), but the previous menu item that was selected remains in the selected state until I hover with the mouse on it (which makes sense considering the above script). Now, how do I tell Flash that on(release), I want the previously selected menu item to play, so that the selected state changes to normal. My hierarchie is this:
root --> menu_mc (contains all the invisble buttons and movie clips) --> home_mc / contact_mc / about me_mc (these are the movie clips I want to target and make the previously selected play in order to return to non-selected state).

Change the description of the change request number" in SE10 after release

Hi All
Is there way to change the
"description of the change request number" in SE10
after releasing the change request number?
appreciate your feedback
Thanks you
Iver

Hello
I do not know a way to do it in se10 but a simple program could do the trick.
Include the following code in your program.
update e07t set as4text = 'your new description'
where trkorr = your_cr and langu = 'E'.
Of course you will have to wrestle with the 'moral issue' of directly updating SAP delivered tables
Regards
Greg Kern.

PR Item Level Release WF not working after Release Strategy change

Hi Experts,
           I did PR item Level Release Standard Work flow and it was working fine now due to client requirement we changed the release strategy and now when the PR workflow triggers it gives the Below mentioned error.
I really don't understand y after changing the release strategy workflow is not working and giving the following error.
Even if i restart the workflow in SWPR the same error is occuring.
Exception occurred    - Error when starting work item 000000390118
PROCESS_NODE     - Error when processing node '0000000003' (ParForEach index 000000)
CREATE                   - Error when creating a component of type 'Step'
CREATE_VIA_WFM - Agent determination for step '0000000003' failed
EVALUATE_AGENT_VIA_RULE - Error in resolution of rule 'AC00000148' for step '0000000003'
AC00000148             - Object type 'TS' not valid
Executing flow work item   - Work item 000000390118: Object FLOWITEM method EXECUTE cannot        be executed
Executing flow work item   - Error when processing node '0000000003' (ParForEach index 000000)
Regards,
Hari

Hello Hari,
please set a breakpoint at function module
ME_REL_GET_RESPONSIBLE
and see what happends in section
    CASE t16fc-frgwf.
* keine Ermittlung
      WHEN space.
        RAISE nobody_found.
* Ermittlung über T16fW
      WHEN '1'.
If using the T16FW-table, it should go to '1', otherwise it may that a user exit under '9' is used. So please check this.
Best wishes,
Florin

Need to Change PR after Release

Hi,
We have a PR which is created and Released. It is configured in such a way that after release, changes are not allowed. Now, the user wants to change the Purchase Group field (only that field) in the PR without re-triggering the release strategy. I checked the Release Indicator in the Release Strategy and changed the field 'Changeable' to the value 2.
Now, it allows to change the Purchase Group. But, user also be able to add new line items to PR, which we don't want to allow.That means, user should only be able to change the Purchase Group field of the existing line items. No other changes should be allowed.
How we can solve this issue.. Please give me your suggestions.
Thanks in advance.

Hi Arminda,
Thanks for your reply.
I tried that. As you said, it will make all fields as 'Display' and only 'Purchasing Group' as editable.
But, the problem is, it will allow the user to add a new line item to the PR without affecting the Release Status.
I don't want to allow the user to add another line item.
Is there any control in the field 'Changeable' where we give the values 1 to 4 ? Please let me know.

Changes in PR even after release

Dear Gurus
In purchase Requisition change (ME52N) it is allowing to change PR Quantity and Price even after released from the higher authorities.
What Configuration has to be done so that After release of PO system should not allow to do any changes in Purchase requisition.
Where as the purchase requisiotn changes has to be done only after the higher authority asks to make changes i.e the higher authorities has sent for revision.
Also plz let me know how can the higher authority set the purchase req for Changes in SAP (Any configuration has to be done for that).
Or any customizing settings required.
If the Changes is done in PR then again release strategy should be applicable.
Please guide me.
Regards
shailesh

Hi SHailesh,
In your release procedure for PR's. For the release indicator, in the field changebill enter
Options:
1 - Cannot be changed (no changes possible)
4 - Changeable, but new release in case of value change or strategy change
The above will resolve your issue.
if helpful award points
Regards,
Vivek

PO Release Strategy not changed after deletion of few line items with less

Subject : PO Release Strategy not changed after deletion of few line items with less Total PO
Dear Friends
We have issue with PO Release strategy. We have created the PO. with release strategy with multiple approvers. After approval of first approval manager , one of the PO line item got deleted and Total PO value is reduced . The new PO value should have changed the PO release strategy. But it is not changed. Old release strategy only showing in the PO which is wrong.
Details of the PO
PO no 4500000123 with 5 line items Total PO value : 100,000 USD Release strategy : AB
PO line item 5 deleted. Now total PO value changed to 50,000 USD and the PO release strategy should have been changed to AA but not changed. Still showing PO release strategy AB only.
Are there any OSS notes available to correct his bug.
Please let me know if you need more details
Thanks in Advance
Thanks
MVS

Hi,
release indicators change it to 4.It may works. Please explore to all 6 indicators..........
i.e,
1-cannot be changed
2-changable,no new determination of strategy
3-changable,new release in case of strategy
4-changable,new release in case of strategy or value change
5-changable,new release if new strategy/outputted
6-changable,new release if new strategy or value changed/ outputted......
And check Characteristic description and value in Classification of Release strategies ........
I hope this will help you. Thanking you.
Regards,
Venkat.

Material number changed after purchase order released

Hi Experts
Please we are experiencing this behavior in our system.
A purchase order for a specific material number is created and released, after this we can change the material number and its plant ¿is this a standard and right be way of SAP?
Thank for your help
JM

Hi,
You can design your process as the business demand.You can set Release Indicator 1 in designing Release procedure for PO , where release Indicator 1 is used for purchasing document cannot be changed/Change not allowed after release.
Regards,
Biju K

Internal change after Release

Similar Messages

Maybe you are looking for