Internal charges - cost to cost transfer

Hi SAP,
Can we have internal charges on cost to cost transfer ?
The scenario is like this ;-
"Cost center B would like to buy Item ABC, they were not allowed to buy any item, All order must come to Plant A. So 
cost center A will make the order the Item ABC from vendor for cost center B. Item ABC will be GR at cost center A.
then they will perform Good issue to cost center B. After GI is perform Cost center A would like to have margin on the extra work on part ordering for cost center B."
what i know, we cannot have extra charges on cost to cost transfer... any ideas ?

hi
the scenario is quite different
after making goodsissue u can pass a Fi entry for the charges
or change the value during goods issue (i havent tried )

Similar Messages

  • Sales order cost objective vs OKB9  Internal order cost object.

    Hi All,
    we facing an  issue with sales order cost objective vs OKB9 cost object.
    For IC PO service material, we assigned account assignment category 4.Reasonis Service material was not showing on G\R account.
    The G\L account 7898788, we assigned to Service Item (material type DIEN)  , for G\Cost 7898788 cost element is assigned in OKB9. Combination business + order 3478787.
    Now conflict with sales order cost objective vs OKB9  internal order cost object.
    While posting intercompany IR posting system thronging below error messageu2026
    Enter only one true account assignment
    Message no. KI249
    Diagnosis
    You made assignments to several objects in CO (cost center, order, project etc.). 2 of these have been created as true objects.
    System Response
    You are allowed only one account assignment for each cost-relevant account
    How to resolve this issue.. Do I make any config changes in the system to overcome this issue?
    Or any sub account to assin in VKOA config for internal orderu2026
    Regards,
    Adi

    Hi Waman,
    Thanks for your inputs.
    Issue :  IR failed to post for wax  Sales Order -> ICPO  - Error:  Enter only one true account assignmentu2019.
    Background:
    Original setup  in  Test system   & Productionu2013 account determination for servive (DIEN) account assignment category u20184u2019 was linked to G/L Account  34444444, As part of project orange u2019, account determination was linked to account u201889710100u2019.
    Account u20188970100u2019   34444444 was replaced with 8970100 ,is not linked to any cost center & always post with reference to IC Sales Order as per config in OKB9 based on company code (US99) + cost element (89701100) + business area (9yyy). This caused a conflict while posting IR, system could not determine exact order for posting financial value.
    Conflict:  Actual Sales Order 34789343 is  linked to PO via account assignment category & IC dummy sales order (8014331) is determine via config setting. Two cost objects cannot be linked to one IR G/L account booking.
    Regards,
    Adi

  • BAPI/Function Module for posting internal order + cost center plan

    Hi Guru:
    Is there any function module/BAPI, which could be used to post internal order + cost center( both of them )plan data?
    Like post a record:
    internal order = 10000
    cost center = C1000
    amount = 1000$
    for plann version 30?
    It seems the BAPI could only contain 1 cost object, either cost center or internal order.
    Thanks.
    Eric

    Hi again,
    I think you may have missed something important here. In R/3 there can only be a single "real" cost object for any one posting. If not then the whole SAP financail model would collapse as there would be "double postings" and that is certainly not wanted.
    If there is a need to post to two cost objects, like in your case, then one of the cost objects MUST be statistical.
    In your scenario SAP has thought of a solution that might be of help for you. An internal order can be set to be statistical in master data. When posting to both the cost center and the internal order then you will get a real posting for the CC and a statisitical posting for the IO. Reporting does work with this as per your requirement.
    Hope this gives you some hints for how to proceed.
    Regards, Johan
    Aaaaah. Noted that this was only plan data. Sorry. But the same still applies for plan data postings as well as for actual data postings. If there should be just one posting that could be "drilled down" from IO to CC -> If you post twice then, when doing "Grand total" for instance, double values would appear. So, still IO should be statistical. //Johan
    Message was edited by: Johan von Reedtz

  • Cost transfer from one project to another

    Dear  All
    Kindly guide...
    Cost Pertaining to Capital project to be captured as Expense project based on Managements decision. eg. Management decides to change an existing capital project  as expense project and settle the total cost as Expense.
    Thanks in advance
    Sujit

    Dear Sreenivas
    Hi! How r u?
    Again I have need a clarification while settlement.
    How can I settle Internal Activity cost to AUC?
    See I created one network and also Internal Activity.
    In Internal Activity assigned hours and confirmed it.
    Than I settle Network to WBSE... its work perfect.
    But when I settle WBSE to AUC its give error...
    "Define a settlement cost element for receiver type FXA".
    See WBSE to AUC working fine for Service activity, and Stock and non stock material assigned.
    Even Checked allocation structue everything is fine.
    For Internal Activity I used Secondary Cost element.
    Hope U get it my requirement.
    Kindly reply asap.
    Thanks in advance.
    sujit

  • Settlement of internal activity cost to primary cost element.

    Hi Gurus,
    My client has a  urgent requirement to settle the internal activity cost captured through Warranty order to a primary cost element (FI), also need an offsetting entry to another primary cost element against the first one.
    Note: The value should flow to COPA also.
    Please suggest the way through which it can be achieved.
    Best Regards,
    Ramakanta

    When you do settlement of the order, you can post to FI all the balance of the order.
    Just configure int he peroid end closing tab of the order the settlement cost element (P&L) and the g/l account (BS- offsetting)
    For sure you can do this on a internal order, i don't know about warranty order (but shall be the same). Otherwise you can first settle to an internal order and then to the desired GL account.
    Regards,
    Paolo

  • Budget Updation (commitment,actual) after cost transfer

    Hi  Gurus
    we are going to start one project by next month.For that we are finalizing wbs element etc.this project will be in separate plant.
    but initial expenses like land acquisition,statutory expenses are already booked against cost center.now we want to transfer the cost in cost center in to wbs elements.I know this can be done via KB11N. But the problem is when i am transferring cost budget details in CJ31 are not updating.means there is no effect in budget (commitment,actual,assigned)
    My client wants to update commitment,actual in CJ30 after cost transfer from cost center to WBS
    Can anyone help me on this?
    Thanks in advance.
    Regards
    Haran.

    Hi Hari,
    The expenses transferred to WBSE will be in the form of actuals which can be seen in "Assigned" tab of txn. CJ30.
    As per my understanding costing is already carried out in your project & you have used it for budget generation & these actuals were not a part of earlier costing then you can manually update the project cost & copy it again as budget in CJ30.
    I hope it will help.

  • Internal Production Cost

    Dear all,
    Can anyone assist me how special production order process cater the internal production cost. (internal production cost, not material cost)

    Internal Production cost captured as Additional Cost in Summary tab,
    You can get its break up in WOR1 table.

  • BOS: Cost Transfer to the Project – Online Processing (T. Code: BOSPS01)

    Hi,
    BOS: Cost Transfer to the Project – Online Processing (T. Code: BOSPS01):
    I am trying to transfer the BOS costing items to Project WBS elements.  To change the BOS quantity, I could not view the ‘Item View for Quantity Transfer’ in the displayed screen (Pic 1).
    I checked the configuration settings under Project System --> Costs --> Planned Costs --> Easy Cost Planning and Execution Services --> Easy Cost Planning, but did not found the solution.
    The project profile is newly defined, but assigned the SAP standard Planning Profile (130001) to the Project Profile and the SAP steetings --> Costing Variant (PS06) is assigned to Planning Profile (130001).
    The displayed screen is as shown below:
    Please let me know how to get the ‘Item View for Quantity Transfer’.
    Best Regards,
    K. Rajendra Prasad Rao

    Hi Maria Miessen,
    Can you please provide the solution for the above issue / suggestion how to proceed further.
    Best Regards,
    K. Rajendra Prasad Rao

  • TEM - Cost Transfer Posting to CO(Business Event Cost)

    Dear All,
    Kindly suggest solution for the following issue
    I have maintained all the cost items with cost elements
    I have booked an empolyee for a business event with resources
    I have maintained receivers cost center in  SEMIN SCOST (T77S0)
    I have created the senders cost center while maintaining the Business Event type
    Event is also Firmly booked
    When i try to  post the cost  by PV1C - Cost Transfer Posting , the posting is neither complete nor giving error
    when i  click  Create cost transfer in Tcode PV1C i am getting this message"S BK 186 Document has no errors."
    But really the document is not created in CO.
    While transferring it is not giving the option of the traffic lights(Red,green and Amber).
    Thanks in Advance
    Shekar

    Hi Mr.Shekar,
    Can you please share the solution. I wanted details about how it is viewed in CO.
    Thanks in advance.
    Regards,
    Pavan

  • Internal Freight costing

    Hi Experts,
      I am a beginner, started with ABAP.
      Some one please give me some basic information on <b>internal freight costing</b> ,  give me some useful links too.
    Regards,
    Madhusudhan

    Hi,
    Good evening and greetings,
    Please go through the following link
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/bc/b5a84069a611d2b41b006094b9cbfb/frameset.htm
    Please reward points if found useful
    Thanking you
    With kindest regards
    Ramesh Padmanabhan

  • Cost Transfer

    Hi
    Is there any standard report (Tcode)  where I can see cost transfer from particular cost cent to WBS element/ to other cost center, Please let me know.
    Regards
    Jaya

    Hi
    You can see all line items in KSB1 report.
    Regards
    Kiran A

  • Cost transfer Report

    Is there any standard report where I can see cost transfer from particular cost cent to WBS element/ to other cost center, Please let me know

    hi
    there is no standard report available you have to generate the custom one

  • TEM - Cost Transfer Posting

    <b>Ver ECC 5.0
    TEM only and not LSO</b>
    In a scenario where attendees are not employees but Customers and they are being billed for attending training programs, is it essential or optional to do <b>Cost Transfer posting</b>. We will be using Profit Center. I understand that costs are posted to FICO, through regular processes, outside of TEM already..

    I have understood that Cost-transfer posting is not essential

  • Internal Disk to Disk Data Transfer Speed Very Slow

    I have a G5 Xserve running Tiger with all updates applied that has recently started experiencing very slow Drive to Drive Data transfer speeds.
    When transferring data from one drive to another ( Internal to Internal, Internal to USB, Internal, Internal to FW, USB to USB or any other combination of the three ) we only are getting about 2GB / hr transfer speeds.
    I initially thought the internal drive was going bad. I tested the drive and found some minor header issues etc... that were able to be repaired so I replace the internal boot drive
    I tested and immediately got the same issue.
    I also tried booting from a FW drive and I got the same issue.
    If I connect to the server over the ethernet network, I get what I would expect to be typical data transfer rates of about 20GB+ / hr. Much higher than the internal rates and I am copying data from the same internal drives so I really don't think the drive is the issue.
    I called AppleCare and discussed the issue with them. They said it sounded like a controller issue so I purchased a replacement MLB from them. After replacing the drive data transfer speeds jumped back to normal for about a day maybe two.
    Now we are back to experiencing slow data transfer speeds internally ( 2GB / hr ) and normal transfer speeds ( 20GB+ / hr ) over the network.
    Any ideas on what might be causing the problem would be appreciated

    As suggested, do check for other I/O load on the spindles. And check for general system load.
    I don't know of a good GUI in-built I/O monitor here (and particularly for Tiger Server), though there is iopending and DTrace and Apple-provided [performance scripts|http://support.apple.com/kb/HT1992] with Leopard and Leopard Server. top would show you busy processes.
    Also look for memory errors and memory constraints and check for anything interesting in the contents of the system logs.
    The next spot after the controllers (and it's usually my first "hardware" stop for these sorts of cases, and usually before swapping the motherboard) are the disks that are involved, and whatever widgets are in the PCI slots. Loose cables, bad cables, and spindle-swaps. Yes, disks can sometimes slow down like this, and that's not usually a Good Thing. I know you think this isn't the disks, but that's one of the remaining common hardware factors. And don't presume any SMART disk monitoring has predictive value; SMART can miss a number of these cases.
    (Sometimes you have to use the classic "field service" technique of swapping parts and of shutting down software pieces until the problem goes away. Then work from there.)
    And the other question is around how much time and effort should be spent on this Xserve G5 box; whether you're now in the market for a replacement G5 box or a newer Intel Xserve box as a more cost-effective solution.
    (How current and how reliable is your disk archive?)

  • How to create an Internal Customer  for Ineterplant stock Transfer

    Daer Gurus,
    Please tell me how to create an Internal Customer for Interplant stock transfer.
    Actually I have three plants out of them two plants are providing goods to third plant. Also both the plants do the stock transfer in eachother.
    How to maintain the Two plants as supplier and third one as a receiver plant. 
    which account group I should use and what details I have to use for it ?  Do I need to maintain all three plants under same account group? I know the theoratical process only for stock transfer please guide me on this Internal customer issue.
    thanks in advance
    regards,
    Sanjay

    Hi,
    Take your three plants as AAAA, BBBB and CCCC.... and these 3 plants may be assigned to the Sales Area of AAA 10 10, BBB 10 10 and CCC 10 10.
    Your STO will have following 4 flows.
    1. AAAA - CCCC
    2. AAAA - BBBB
    3. BBBB- CCCC
    4. BBBB- AAAA
    you need to do the following settings...
    1. Assign the Sales Area for the Shipping Plants... for ex (AAAA - AAA 10 10 and BBBB - BBB 10 10)
    2. You need to Create a Internal Customer for every Rec. Plant and need to assign the same to the Rec Plant. And Also note that this customer needs to be created in the Sales Area which is assigned in the Shipping Plant.
    (Note that CCCC will be Rec Plant from Both AAAA and BBBB... So you need to extend that customer for both the Sales Area of the plants AAAA and BBBB)
    Following is the example settings required for our scenario 1.
    AAAA will be a supplying plant and CCCC will be rec. plant....  for this you need to create a internal Customer (for ex C1000) in Sales area AAA 10 10 (which is assigned to the plant AAAA) and assign the Customer number (C1000) to Plant CCCC.
    Now you created a plant CCCC as a customer in Sales Area AAA 10 10 (which is nothing but plant AAAA)...
    Also here you need assign the Sales Area AAA 10 10 to the Plant AAAA.
    Hope this will be useful to you.
    Thanks,
    Muthu

Maybe you are looking for