Internal Error in Specification workbench ( CG02)

Hi All,
We had raised an OSS message for an Internal error we were getting in the t code CG02 while entering the data for chemical properties.Below mentioned is the error message.
Internal program error; (SAPLC1AX RMWBPWB0 0 charact.-descr. not found)
SAP has asked us to refer the Note: 1146700 and adopt method 2 to fix the issue.Method 2 steps as in the Note 1146700 mentioned below.
Method 2: Call transaction SCC1 with a user-defined object list.
Prerequisites:
This is recommended if you have already made modifications to EH&S objects that are in the object list EHS_COMM24.
In your target client, the protection against the client copy is not activated.
Proceed as follows:
On the source client, create your own object list in which you specify the missing classes, characteristics and so on, that is, the complete delta. Call transaction SCC1 on your target client, specify 000 as the source client and specify the name of the last object list you created as the transport request.
Note that the user who executes this activity must have authorization for the client copy because the same functions (restricted to objects in your object list) are executed in this activity. The object list must be created once and can then be used for all clients.
Please refer the Note 1146700: Transferring the standard database structure
Please can you let us know how do we adopt method 2 to fix the internal error issue.
Thanks
Ismail

Hello Ismael and Krishna,
Please be more specific:
Which part of the OSS response / OSS Note did you not understand?
Basically what is wrong in you system is:
You are missing some SAP EH&S class and characteristic definition in your client xxx (In your case it seems to be the object description).
However these classes and characteristics are in client 000.
The object list EHS_COMM24 contains all these classes and characteristics and can be used to bring them into your client xxx via the methods described in the OSS Notes - or see SAP help.
HOWEVER: If you have modified SAP EH&S Classes (SAP_EHS*) or characteristics they will be overwritten with the default delivery from client 000 if you use object list EHS_COMM24. Therefore - if you have modified classes or characteristics - you need to create your own object list containing only the classes and characteristics for which you get an error in CG02.
Hope this helps
Mark

Similar Messages

Specification Status in Header Specification Workbench Header

Hi,
In search screen of Specification Workbench (CG02) under Validity, what is the purpose/benefit of "Status"? There are four statuses: IP (In Process), FR (For Release), NC (Noncritical Change), and RE (Released).
If no status is assigned when a new specification is created, what status is it assigned to by default?
Can these statuses be used to drive workflow? i.e one person creating specification, at some point is it reviewed/finalized then set to Released status?
Thank you for helping answering this question.
Javed.

Hello Javed
Status on the level of the specification:
this is a "new" feature introduced in EH&S 2.7. Using this feature you can generate workflows etc. In principle this status can help you (as a company) in the data maintenance process. This is done per "usage" (and other objects). The "Status" is integrated into the report generation process as well if you have done a proper set up of the generation variants in use.
Like many of the EH&S "Status" there is a default "net" which can be enhanced by customer. Furthermore in doing so you need a good set up in the area of access rights later so that the process of maintenance is not disturbed.
You will find some help in the documentation of SAP:
http://help.sap.com/erp2005_ehp_04/helpdata/en/a7/286c740a6c11d28a220000e829fbbd/frameset.htm
Topic "Specification Status" which is part of chapter Specification Management (EHS-BD-SPE).
Here you will find additionally some help regarding the delivered status and the process
- Change Not Permitted
- Generation Not Permitted
- Editing Specification Statuses
The SAP documentation is useful as a starter. We have done some investigations in using the "status" in the past. But it is quite complex so we are not using this feature.
With best regards
C.B.

Error with workbench : - Internal Error (-2010)

Hi guys,
When i try to import these template.
I get an internal error.
Please help.
Thank you.

Hi Adrian Lee....
Make sure the file should not have any special characters.
Pls check the ff sap note. this may help you
[1087138|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3030303130383731333826] & [1495934|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3030303134393539333426]
Hope Helpful
Regards
Kennedy

Internal error while overwriting a charecteristic value in a class

Hi,
I am overwriting a charecteristic value in a class with a change master.
In CL02 I entered the class and the chnage number and entered in edit mode.
Then I selected the charecteristic view and selected the specific charectristic which value I need to overwrite and then clicked on "Overwrite Value" button.
Now the system has found an internal error: the required characteristic data was not found in characteristics maintenance.
Charecteristic data not found: Internal Error
Please tell me how can I get out of this error.

hi,
Please check whether the overwriting indicator check box in character tab is select or not.
It should be flagged.
Thanks & regards
Reddiy.

Msg 8631 Internal error: Server stack limit has been reached on SQL Server 2012 from T-SQL script that runs on SQL Server 2008 R2

I have an Script mostly that is generated by SSMS which works with-out issue on SQL Server 2008, but when I attempt to run it on a new fresh install of SQL Server 2012 I get an Msg 8631. Internal error: Server stack limit has been reached. Please look for
potentially deep nesting in your query, and try to simplify it.
The script itself doesn't seem to be all that deep or nested. The script is large 2600 lines and when I remove the bulk of the 2600 lines, it does run on SQL Server 2012. I'm just really baffled why something that SQL Server generated with very
few additions/changes AND that WORKS without issue in SQL Server 2008 R2 would suddenly be invalid in SQL Server 2012
I need to know why my script which is working great on our current SQL Server 2008 R2 servers suddenly fails and won't run on an new SQL Server 2012 server. This script is used to create 'bulk' Replications on a large number of DBs saving a tremendous
amount of our time doing it the manual way.
Below is an 'condensed' version of the script which fails. I have removed around 2550 lines of specific sp_addarticle statements which are mostly just copy and pasted from what SQL Management Studio 'scripted' for me went I when through the Replication
Wizard and told it to save to script.
declare @dbname varchar(MAX), @SQL nvarchar(MAX)
declare c_dblist cursor for
select name from sys.databases WHERE name like 'dbone[_]%' order by name;
open c_dblist
fetch next from c_dblist into @dbname
while @@fetch_status = 0
begin
print @dbname
SET @SQL = 'DECLARE @dbname NVARCHAR(MAX); SET @dbname = ''' + @dbname + ''';
use ['+@dbname+']
exec sp_replicationdboption @dbname = N'''+@dbname+''', @optname = N''publish'', @value = N''true''
use ['+@dbname+']
exec ['+@dbname+'].sys.sp_addlogreader_agent @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1, @job_name = null
-- Adding the transactional publication
use ['+@dbname+']
exec sp_addpublication @publication = N'''+@dbname+' Replication'', @description = N''Transactional publication of database
'''''+@dbname+''''' from Publisher ''''MSSQLSRV\INSTANCE''''.'', @sync_method = N''concurrent'', @retention = 0, @allow_push = N''true'', @allow_pull = N''true'', @allow_anonymous = N''false'', @enabled_for_internet
= N''false'', @snapshot_in_defaultfolder = N''true'', @compress_snapshot = N''false'', @ftp_port = 21, @allow_subscription_copy = N''false'', @add_to_active_directory = N''false'', @repl_freq = N''continuous'', @status = N''active'', @independent_agent = N''true'',
@immediate_sync = N''true'', @allow_sync_tran = N''false'', @allow_queued_tran = N''false'', @allow_dts = N''false'', @replicate_ddl = 1, @allow_initialize_from_backup = N''true'', @enabled_for_p2p = N''false'', @enabled_for_het_sub = N''false''
exec sp_addpublication_snapshot @publication = N'''+@dbname+' Replication'', @frequency_type = 1, @frequency_interval = 1, @frequency_relative_interval = 1, @frequency_recurrence_factor = 0, @frequency_subday = 8,
@frequency_subday_interval = 1, @active_start_time_of_day = 0, @active_end_time_of_day = 235959, @active_start_date = 0, @active_end_date = 0, @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1
-- There are around 2400 lines roughly the same as this only difference is the tablename repeated below this one
use ['+@dbname+']
exec sp_addarticle @publication = N'''+@dbname+' Replication'', @article = N''TABLE_ONE'', @source_owner = N''dbo'', @source_object = N''TABLE_ONE'', @type = N''logbased'', @description = null, @creation_script =
null, @pre_creation_cmd = N''drop'', @schema_option = 0x000000000803509F, @identityrangemanagementoption = N''manual'', @destination_table = N''TABLE_ONE'', @destination_owner = N''dbo'', @vertical_partition = N''false'', @ins_cmd = N''CALL sp_MSins_dboTABLE_ONE'',
@del_cmd = N''CALL sp_MSdel_dboTABLE_ONE'', @upd_cmd = N''SCALL sp_MSupd_dboTABLE_ONE''
EXEC sp_executesql @SQL
SET @dbname = REPLACE(@dbname, 'dbone_', 'dbtwo_');
print @dbname
SET @SQL = 'DECLARE @dbname NVARCHAR(MAX); SET @dbname = ''' + @dbname + ''';
use ['+@dbname+']
exec sp_replicationdboption @dbname = N'''+@dbname+''', @optname = N''publish'', @value = N''true''
use ['+@dbname+']
exec ['+@dbname+'].sys.sp_addlogreader_agent @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1, @job_name = null
-- Adding the transactional publication
use ['+@dbname+']
exec sp_addpublication @publication = N'''+@dbname+' Replication'', @description = N''Transactional publication of database
'''''+@dbname+''''' from Publisher ''''MSSQLSRV\INSTANCE''''.'', @sync_method = N''concurrent'', @retention = 0, @allow_push = N''true'', @allow_pull = N''true'', @allow_anonymous = N''false'', @enabled_for_internet
= N''false'', @snapshot_in_defaultfolder = N''true'', @compress_snapshot = N''false'', @ftp_port = 21, @allow_subscription_copy = N''false'', @add_to_active_directory = N''false'', @repl_freq = N''continuous'', @status = N''active'', @independent_agent = N''true'',
@immediate_sync = N''true'', @allow_sync_tran = N''false'', @allow_queued_tran = N''false'', @allow_dts = N''false'', @replicate_ddl = 1, @allow_initialize_from_backup = N''true'', @enabled_for_p2p = N''false'', @enabled_for_het_sub = N''false''
exec sp_addpublication_snapshot @publication = N'''+@dbname+' Replication'', @frequency_type = 1, @frequency_interval = 1, @frequency_relative_interval = 1, @frequency_recurrence_factor = 0, @frequency_subday = 8,
@frequency_subday_interval = 1, @active_start_time_of_day = 0, @active_end_time_of_day = 235959, @active_start_date = 0, @active_end_date = 0, @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1
-- There are around 140 lines roughly the same as this only difference is the tablename repeated below this one
use ['+@dbname+']
exec sp_addarticle @publication = N'''+@dbname+' Replication'', @article = N''DB_TWO_TABLE_ONE'', @source_owner = N''dbo'', @source_object = N''DB_TWO_TABLE_ONE'', @type = N''logbased'', @description = null, @creation_script
= null, @pre_creation_cmd = N''drop'', @schema_option = 0x000000000803509D, @identityrangemanagementoption = N''manual'', @destination_table = N''DB_TWO_TABLE_ONE'', @destination_owner = N''dbo'', @vertical_partition = N''false''
EXEC sp_executesql @SQL
fetch next from c_dblist into @dbname
end
close c_dblist
deallocate c_dblist
George P Botuwell, Programmer

Hi George,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
If you have any feedback on our support, please click
here.
Allen Li
TechNet Community Support

I*sqlplus: Internal error (no valid library could be found)

Hello
I have installed Oracle 8.1.7 on Windows NT
and Oracle 8.1.7 on Sun Sparc Solaris.
On Windows NT, I have installed i*sqlplus.
However, when connecting from browser
in the index file
I've given a valid username/password of
a database in Oracle 8.1.7 on Sun Sparc
and a connect string to the database
on Oracle 8.1.7 on Sun Sparc.
This connect string is created using
Net 8 assistant and this connect string
is on the Windows NT with Oracle 8.1.7.
However, instead of connecting I
am getting the error
Internal error : (no valid library could be found)
Can you please help me?
Thanks

Cyril,
Can you connect to the database using the command line version of SQL*Plus? If so, you're using the correct syntax.
It sounds like iSQL*Plus is not set up correctly. Do you have the necessary 8.1.7 components on the NT machine (Oracle HTTP Server, Net8, SQL*Plus)?
Review the installation documentation, and/or post more specific information on your set up.
Alison
iSQL*Plus Team

Internal Error 7204, 6107874, 7775428, 0

I've seen that I'm not the only one faced with the same problem of Internal Error 7202 but I'm getting rather annoyed because it is now nearly impossible to update a book without a crash. Typical error message as shown below.
Error
Internal Error 7204, 6107874, 7775428, 0. FrameMaker has detected a serious problem and must quit.
A file named "c:\program files\adobe\framemaker7.2\FrameLog_07.09.10_08.44.05.txt" has been generated which contains information that may help Frame development improve the product for future releases.
Please describe your recent actions and send this, along with the generated file, to [email protected]. Due to the volume of feedback, we are unable to respond to technical questions. For support, please refer to http://www.adobe.com/support.
OK
And after OK has been pressed
Adobe FrameMaker (Structured): FrameMaker.exe - Application Error
The instruction at "0x0034199f" referenced memory at "0x00000000". The memory could not be "read".
Click on OK to terminate the program
OK
I'm using FrameMaker 7.2b158 in an XP Windows computer including all the latest patches. I've implemented some of the suggestions made in the forum like saving all documents in MIF format and then in fm-format again but nothing helps. So far I've been a quite happy user of FrameMaker because of its stability and capability of handling large documents / books but the status now is worse I ever had with any other Microsoft product. The problem is not new for me, I had it also when I used FrameMaker 7.1 and in the beginning of using FrameMaker 7.2 but it happened very infrequent.
Sometimes, if I close FrameMaker and then re-start FrameMaker again before the update process, it works but it doesn't seem to be reproducible. Please not that I'm still working on the same document, a satellite user manual, although it's now much larger (about 20 files in book with a total page count of about 2500 pages).
Of course there is also a crash log, but I cannot interpret this.
Any ideas what is going wrong?
Cheers
Tommy Strandberg
EADS Astrium GmbH / Germany

My crash is related to conditional text and XRef tags, possibly in
tables. I am using XP-pro SP2, plenty of RAM (almost 500MB available
after opening all files), plenty of swap, etc. I have all files open,
etc. This has nothing to do with generating PDF (which always seems
to work for me). I have tried doing .fm->.mif->.fm and the symptoms
did not change. Using Frame 7.1p114, non-structured.
The key is that everything works with all conditional test shown (not
hidden). Hide some conditions, click certain links and BOOM!.
When I Show all conditional text I can update the book, and all
XRefs are resolved (no errors). When I Hide some conditions and update
the book all XRefs are again resolved (no errors). But, I can reliably
crash Frame 7.1 just by double-clicking on certain links, in certain
source files, to an XREF tag located in a table (my book has 50+
files, 10+ conditional text options, thousands of XRef tags, etc.).
I can choose a specific link and confirm that the XRef tag exists and
is not hidden, both before and after hiding any text. Somehow, I think
that Frame gets confused when hiding some other tag... but even so, it
shouldn't crash.
The crash symptom indicates attempting to access address 0x0..00
(sometimes 0x0..04), which is correctly illegal (I have some sofware
experience). This is a classic software problem, caused by coding
flaws. Could be a NULL pointer (a software thing which remembers were
something is stored) or by not checking a designed-in static
limit... when the limit is exceeded the code executes into data space
(i.e. address 0x0..00). In either case (and there are other potential
causes), the root cause is a Frame implementation error; i.e. bug,
flaw, etc.
So, having said all this, I could use some advice on how to approach
Adobe about fixing this. I have a 100% reproducable problem but,
except for sending in the crash log, have not yet tried to contact
Adobe.
Advice welcome.
Thanks

A fatal error occurred while creating an SSL client credential. The internal error state is 10011.

Need help. I have my pilot lync 2013 pool up (in coexistence with 2010 production environment) and can log into Lync 2013 environment with a lync 2010 client but am not able to with a lync 2013 client. It just prompts for password but will not
take it. I'm sseeing this on my front end server multiple times:
A fatal error occurred while creating an SSL client credential. The internal error state is 10011.
Came across this http://www.logicspot.net/index.php?id=50 and tried disabling TLS 1.2, which I did and verified but yet the issue still exists.
All my certs are good coming from internal CA. My signin logs show below but keep in mind, this works just fine if using a 2010 lync client to my lync 2013 servers. Issue only occurs when trying to connect using a lync 2013 client.
1 Login: FAIL (hr = 0x1)
this request needs authentication, trying webticket from: https://domain.com/WebTicket/WebTicketService.svc
1.1 Get-NewWebTicket: FAIL (hr = 0x1)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
1.1.1 ExecuteWithMetadataInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.2 ExecuteWithWindowsOrNoAuthInternal: PASS
1.1.3 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.4 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Discovery task(0A4FF830) sent to URL http://domain.com completed with hr=0x80f10045
1.1.5 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.6 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
Rich

Hi,
Please check the server role and Web Services for Internet Information Services (IIS) are set correctly.
For the detailed IIS configuration, please check:
http://technet.microsoft.com/en-us/library/gg412871.aspx
As Lync client 2013 attempt to query in order to perform autodiscover of the Lync registration server. First
lyncdiscoverinternal.<sipdomain> Host (A) record and then
lyncdiscover.<sipdomain> Host (A) record. If neither of these records are resolvable then the legacy DNS SRV and A record fall-back process is used. So make sure you have add the two A record in DNS server.
More details:
http://blog.schertz.name/2012/12/lync-2013-client-autodiscover/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

DCA-40000: internal error when calling a web service

Hello,
I would like to call a web service in Oracle UCM with basic authentication (CheckInUniversal). In JDeveloper 11.1.1.2 I can specify username and password for the WS at design time and the JSPX runs fine.
Now I have added some piece of code into a managed bean (CheckInBean) to use a specific username and password at runtime. When I run the page I get a DCA-40000 with the following error stack:
<Utils><buildFacesMessage> ADF: Adding the following JSF error message: The Web Service call failed due to an internal error.
oracle.adf.model.adapter.AdapterException: DCA-40000: The Web Service call failed due to an internal error.
     at oracle.adfinternal.model.adapter.webservice.WSDataControl.invokeOperation(WSDataControl.java:270)
     at oracle.adf.model.bean.DCBeanDataControl.invokeMethod(DCBeanDataControl.java:430)
     at oracle.adf.model.binding.DCInvokeMethod.callMethod(DCInvokeMethod.java:257)
     at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1625)
     at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2141)
     at oracle.adf.model.bean.DCBeanDataControl.invokeOperation(DCBeanDataControl.java:467)
     at oracle.adf.model.adapter.AdapterDCService.invokeOperation(AdapterDCService.java:307)
     at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:730)
     at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.executeEvent(PageLifecycleImpl.java:394)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding._execute(FacesCtrlActionBinding.java:252)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding.execute(FacesCtrlActionBinding.java:210)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
     at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
     at integration.view.CheckInBean.execute(CheckInBean.java:134)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
     at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
     at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1245)
     at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
     at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:148)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94)
     at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94)
     at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:812)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:292)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
With debugger I found that it happens when the iterator CheckInUniversalResultIterator is called.
HTTP Analyzer shows that there are only empty SOAP messages sent to UCM but the correct values are present in the the bean.
Here is the code of the bean:
package integration.view;
import java.util.HashMap;
import java.io.*;
import java.util.Properties;
import javax.el.ELContext;
import javax.el.ExpressionFactory;
import javax.el.MethodExpression;
import javax.el.ValueExpression;
import javax.faces.application.Application;
import javax.faces.context.FacesContext;
import javax.faces.event.ActionEvent;
import oracle.adf.model.BindingContainer;
import oracle.adf.model.BindingContext;
import oracle.adf.model.binding.DCBindingContainer;
import oracle.adf.model.binding.DCDataControl;
import oracle.adfinternal.model.adapter.webservice.WSDataControl;
import oracle.adfinternal.model.adapter.webservice.security.SecurityModel;
// import oracle.binding.BindingContainer;
import oracle.webservices.model.Port;
public class CheckInBean extends SecurityModel {
private String fileName;
private String fileContent;
private HashMap primaryFile;
String mSavedCSFKey = null;
public CheckInBean() {
public void setFileName(String fileName) {
this.fileName = fileName; }
public String getFileName() {
return fileName;
public void setFileContent(String fileContent) {
this.fileContent = fileContent;
public String getFileContent() {
return fileContent;
public void setPrimaryFile(HashMap primaryFile) {
this.primaryFile = primaryFile;
public HashMap getPrimaryFile() throws IOException {
FacesContext facesCtx = FacesContext.getCurrentInstance();
Application app = facesCtx.getApplication();
ExpressionFactory elFactory = app.getExpressionFactory();
ELContext elContext = facesCtx.getELContext();
// gets the value from the managed bean
fileName = elFactory.createValueExpression(elContext, "#{pageFlowScope.ReportBean.reportName}", Object.class).getValue(elContext).toString();
System.out.println(fileName);
// puts the file name and the content into a hash map
HashMap hashMap = new HashMap();
hashMap.put("fileName",fileName);
System.out.println(fileName);
hashMap.put("fileContent",getFileInBytes(ReportBean.reportPath, fileName));
return hashMap;
private static byte[] getFileInBytes(String reportOutputPath, String fileName) throws IOException {
File file = new File(reportOutputPath,fileName);
System.out.println(reportOutputPath + "+" + fileName);
InputStream inputStream = new FileInputStream(file);
// Get the size of the file
long size = file.length();
System.out.println("Size of the file: "+ size);
// Check that size is not larger than Integer.MAX_VALUE
if (size > Integer.MAX_VALUE) {
System.out.println("File too large !!");
return null;
// Read the bytes into the byte array
byte[] byteArray = new byte[(int)size];
System.out.println("New Byte Array");
int offset = 0;
int byteRead = 0;
while ((offset < byteArray.length)
((byteRead=inputStream.read(byteArray, offset, byteArray.length-offset)) >= 0)){
byteRead = offset + byteRead;
System.out.println(byteRead);
inputStream.close();
return byteArray;
public void execute(ActionEvent aev) {
FacesContext fctx = FacesContext.getCurrentInstance();
Application app = fctx.getApplication();
ExpressionFactory expF = app.getExpressionFactory();
ValueExpression ve = expF.createValueExpression(fctx.getELContext(), "#{bindings}", DCBindingContainer.class);
DCBindingContainer cont = (DCBindingContainer)ve.getValue(fctx.getELContext());
DCDataControl dc = cont.findDataControl("CheckInECM");
if(dc.getAdaptedDC() instanceof WSDataControl)
WSDataControl wsdc = (WSDataControl)dc.getAdaptedDC();
wsdc.getProvider().setSecurityModel(this);
// execute the data control method, that was bound to this
// button's action listener.
MethodExpression me = expF.createMethodExpression(fctx.getELContext(),
"${bindings.CheckInUniversal.execute}", Object.class,
new Class[0]);
me.invoke(fctx.getELContext(), null);
// public BindingContainer getBindings() {
// return (BindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
// override security properties for any policy on the current port
// before the method execution.
public void initSecurity(Port thisPort) {
super.initSecurity(thisPort);
System.out.println(thisPort.hashCode());
Properties callP = (Properties)this.getCallProperties(thisPort);
callP.put("javax.xml.ws.security.auth.username", "sysadmin");
callP.put("javax.xml.ws.security.auth.password", "welcome1");
mSavedCSFKey = (String)callP.remove("csf-key");
this.saveCallProperties(thisPort, callP);
// Restore the config at the end of the request.
public void clearSecurityParameters(Port thisPort) {
super.clearSecurityParameters(thisPort);
Properties callP = (Properties)this.getCallProperties(thisPort);
callP.remove("javax.xml.ws.security.auth.username");
callP.remove("javax.xml.ws.security.auth.password");
//put back the saved csf key as default...
callP.put("csf-key", mSavedCSFKey);
this.saveCallProperties(thisPort, callP);
}

If you could enclose your code inside tag it will improve readability for us.
Anyways, first thing that I could think of is - what is the scope of your managed bean..? If its in request scope can you try changing it to higher scope level (session scope or page view scope).
regards,
~K

Dreamweaver CC has "internal error... while resizing a view" when asked to creat a fluid grid layout

Excited for expanded fluid grid layout features it had, I got Dreamweaver Creative Cloud SPECIFICALLY for that feature.
Sign up, download, install went smoothly. Open Dreamweaver CC, create new fluid grid layout, hit OK, name and desigante location of .css file and get the following error.
"An internal error occurred while resizing a view. (Cview::ResizeFrameBy)" OK
I click OK and nothing happens. App freezes. No css, no files. No nothing.
Have tried restarting, re-installing, different names and destinations for .css file. I'm running Mac 10.8.2
Literally, this is the first thing I've done w/ an ACC app and I am displeased and frustrated. Getting customer service either via forum or offshore phone call less than ideal.
(apologies for spelling error in subj. can't edit it)

Can you try the steps mentioned on the thread: http://forums.adobe.com/message/5420680
Verified Fix :
For all the Dreamweaver crashes on opening Fluid Grid pages , Closing Documents or opening files
Please make sure the default system fonts are all enabled - especially Verdana
On MAC -
Open Font BOOK from Applications
Activate VERDANA FAmily of Fonts
-Harshit yadav

Ora-00600: internal error on 11g database in windows 2007 environment

Hello , i have these problems please help me to solve it.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>emctl status dbconsole
Environment variable ORACLE_SID not defined. Please define it.
C:\Windows\system32>set ORACLE_SID=testsid
C:\Windows\system32>emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://local:1158/em/console/aboutApplication
Oracle Enterprise Manager 11g is not running.
Logs are generated in directory C:\app\23333941\product\11.1.0\db_3/local_testsid/sysman/log
C:\Windows\system32>sqlplus sys/@**** as sysdba
SQL*Plus: Release 11.1.0.6.0 - Production on Fri Jul 5 09:27:37 2013
Copyright (c) 1982, 2007, Oracle. All rights reserved.
SQL*Plus: Release 11.1.0.6.0 - Production
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Use SQL*Plus to execute SQL, PL/SQL and SQL*Plus statements.
Usage 1: sqlplus -H | -V
    -H             Displays the SQL*Plus version and the
                   usage help.
    -V             Displays the SQL*Plus version.
Usage 2: sqlplus [ [<option>] [<logon>] [<start>] ]
<option> is: [-C <version>] [-L] [-M "<options>"] [-R <level>] [-S]
    -C <version>   Sets the compatibility of affected commands to the
                   version specified by <version>. The version has
                   the form "x.y[.z]". For example, -C 10.2.0
    -F             Enables the failover mode for a RAC environment.
    -L             Attempts to log on just once, instead of
                   reprompting on error.
    -M "<options>" Sets automatic HTML markup of output. The options
                   have the form:
                   HTML [ON|OFF] [HEAD text] [BODY text] [TABLE text]
                   [ENTMAP {ON|OFF}] [SPOOL {ON|OFF}] [PRE[FORMAT] {ON|OFF}]
    -R <level>     Sets restricted mode to disable SQL*Plus commands
                   that interact with the file system. The level can
                   be 1, 2 or 3. The most restrictive is -R 3 which
                   disables all user commands interacting with the
                   file system.
    -S             Sets silent mode which suppresses the display of
                   the SQL*Plus banner, prompts, and echoing of
                   commands.
<logon> is: (<username>[/<password>][@<connect_identifier>] | /)
              [AS SYSDBA | AS SYSOPER | AS SYSASM] | /NOLOG | [EDITION=value]
    Specifies the database account username, password and connect
    identifier for the database connection. Without a connect
    identifier, SQL*Plus connects to the default database.
    The AS SYSDBA, AS SYSOPER and AS SYSASM options are database
    administration privileges.
    <connect_identifier> can be in the form of Net Service Name
    or Easy Connect.
      @[<net_service_name> | [//]Host[:Port]/<service_name>]
        <net_service_name> is a simple name for a service that resolves
        to a connect descriptor.
        Example: Connect to database using Net Service Name and the
                 database net service name is ORCL.
           sqlplus myusername/mypassword@ORCL
        Host specifies the host name or IP address of the database
        server computer.
        Port specifies the listening port on the database server.
        <service_name> specifies the service name of the database you
        want to access.
        Example: Connect to database using Easy Connect and the
                 Service name is ORCL.
           sqlplus myusername/mypassword@Host/ORCL
    The /NOLOG option starts SQL*Plus without connecting to a
    database.
    The EDITION specifies the value for Application
    Edition
<start> is: @<URL>|<filename>[.<ext>] [<parameter> ...]
    Runs the specified SQL*Plus script from a web server (URL) or the
    local file system (filename.ext) with specified parameters that
    will be assigned to substitution variables in the script.
When SQL*Plus starts, and after CONNECT commands, the site profile
(e.g. $ORACLE_HOME/sqlplus/admin/glogin.sql) and the user profile
(e.g. login.sql in the working directory) are run. The files may
contain SQL*Plus commands.
Refer to the SQL*Plus User's Guide and Reference for more information.
C:\Windows\system32>sqlplus sys/1118@testsid as sysdba
SQL*Plus: Release 11.1.0.6.0 - Production on Fri Jul 5 09:29:03 2013
Copyright (c) 1982, 2007, Oracle. All rights reserved.
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
Enter user-name: sysdba
Enter password:
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
Process ID: 0
Session ID: 0 Serial number: 0
Enter user-name: sys
Enter password:
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
Process ID: 0
Session ID: 0 Serial number: 0
SP2-0157: unable to CONNECT to ORACLE after 3 attempts, exiting SQL*Plus
C:\Windows\system32>sqlplus/nolog
SQL*Plus: Release 11.1.0.6.0 - Production on Fri Jul 5 09:32:59 2013
Copyright (c) 1982, 2007, Oracle. All rights reserved.
SQL> connect/as sysdba
Connected.
SQL> create table test(id number, id1 number);
create table test(id number, id1 number)
ERROR at line 1:
ORA-01109: database not open
SQL> select status from v$instance;
STATUS
MOUNTED
SQL> alter database open;
ERROR at line 1:
ORA-00600: internal error code, arguments: [kcrfr_update_nab_2], [0x51434A54],
[2], [], [], [], [], []
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
C:\Windows\system32>startup mount
'startup' is not recognized as an internal or external command,
operable program or batch file.
C:\Windows\system32>sqlplus/nolog
SQL*Plus: Release 11.1.0.6.0 - Production on Fri Jul 5 10:05:42 2013
Copyright (c) 1982, 2007, Oracle. All rights reserved.
SQL> connect/as sysdba
Connected.
SQL> startup mount;
ORA-01081: cannot start already-running ORACLE - shut it down first
SQL> recover database;
Media recovery complete.
SQL> select GROUP#,SEQUENCE#,ARCHIVED,STATUS from v$log order by SEQUENCE#;
    GROUP# SEQUENCE# ARC STATUS
         2        539 NO INACTIVE
         3        540 NO ACTIVE
         1        541 NO CURRENT
SQL> recover database;
ORA-00283: recovery session canceled due to errors
ORA-00264: no recovery required
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
C:\Windows\system32>sqlplus/nolog
SQL*Plus: Release 11.1.0.6.0 - Production on Fri Jul 5 10:17:10 2013
Copyright (c) 1982, 2007, Oracle. All rights reserved.
SQL> connect / as sysdba
Connected.
SQL> startup mount
ORA-01081: cannot start already-running ORACLE - shut it down first
SQL> shutdown immediate;
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SQL> startup;
ORACLE instance started.
Total System Global Area 313860096 bytes
Fixed Size                  1332892 bytes
Variable Size             276826468 bytes
Database Buffers           29360128 bytes
Redo Buffers                6340608 bytes
Database mounted.
Database opened.
SQL> recover database;
ORA-00283: recovery session canceled due to errors
ORA-01124: cannot recover data file 1 - file is in use or recovery
ORA-01110: data file 1:
'C:\APP\23333941\ORADATA\TEST\DATAFILE\O1_MF_SYSTEM_8XB8TY3S_.DBF'
SQL> select GROUP#,SEQUENCE#,ARCHIVED,STATUS from v$log order by SEQUENCE#;
    GROUP# SEQUENCE# ARC STATUS
         3        540 NO INACTIVE
         1        541 NO INACTIVE
         2        542 NO CURRENT
SQL> restore database;
SP2-0734: unknown command beginning "restore da..." - rest of line ignored.
SQL> recover database;
ORA-00283: recovery session canceled due to errors
ORA-01124: cannot recover data file 1 - file is in use or recovery
ORA-01110: data file 1:
'C:\APP\23333941\ORADATA\TEST\DATAFILE\O1_MF_SYSTEM_8XB8TY3S_.DBF'
SQL>
Thanks with regards Ganaa;

What happened prior that resulted in the disaster scenario that you posted/
When was the last time the DB opened with out error?
What changed since then?

An internal error has occurred in the secLdap plugin - CR XI (Login to Ent)

Hi,
We recently changed the authentication type on BO XI R2 Enterprise from Enterprise to LDAP mode and have been able to add and configure all the LDAP groups. We know that the authentication is successful as users have been able to successfully login via the Infoview/CMC.
However, we are facing a problem from certian workstations (for example mine) when ever we try to login to BO Enterprise via the Crystal Reports XI client thorough LDAP as it gives the error 'An internal error has occurred in the secLdap plugin'. (PS: The Enterprise Authentication mode works) From what I have understood that this error is workstation specific as the same login is successfull from another workstation.
The CR XI client on all the workstations are of the same version (11.0.0.1282) but the Windows Updates differs. For e.g.: I have Windows XP SP 3 (with the latest of the updates with IE 8)
Is there any updates to CR XI Client to solve this issue or am I missing something here?

Your client is CR R1, your server is XI R2. This is a known bug. To fix you need BOE XIR1 SP3 or above. I'm not sure this was fixed in a CR service pack. Sorry I can't find a link for that right now.
Or use [this link|http://resources.businessobjects.com/support/additional_downloads/service_packs/crxir2.asp] to get CR R2, uninstall CR R1, and replace with CR R2. NOTE: they should still use the same license keys. If using CR to XIR2 you should always keep the same version so this is the preferred method.
Regards,
Tim

An internal error occured while calling 'processDPCommandsEx' API. (Error: ERR_WIS_30270)

Hi ALL,
I am facing a wierd issue while opening/refreshing/broadcasting a webi report.
The error message scrnshot:
This error is not throughout the reports, but for specific reports only, when checked the Bex query definition it works fine, but gives error for Webi reports.
Recently we had upgrade of BO 4.0 SP7 patch 9.
The reports are directly built on Bex queries, Bex queries contains simple Structures and few CKF's.
Would be thankful for any help recieved in resolving the above issue.
Regards,
Jaywant Kulkarni.

Hi jaywant,
Please check the note: 1760827 it may be helpful
( An internal error occurred while calling the 'processDPCommands' API. (ERR_WIS_30270) due to some scenarios.
Scenario 1:
Error occurs when try to refresh a migrated Web Intelligence report in InfoView, after entering a date or dates for prompts.
Suggested Solution:
Modify problematic report in Webi.
Change the prompt definition to be a constant, run the report in Webi, and save it.
Change the prompt definition back to prompt with required date definition. Make sure you are using the correct date format! (The report prompt should tell you what the format is supposed to be.) Re-run the report in Webi, and save it.
Re-open the report in InfoView and refresh.
Scenario 2: Error occurs when trying to edit the properties of a Webi report containing merged dimensions.
Suggested Solution:
Remove the merged dimensions and then re-establish them.
Scenario 3: Error occurs when the InfoView report has been open and idle for a long time.
Suggested Solution:
This error can be an indication of a time-out, based on the server’s settings. Make sure you save your work often. You will need to close and re-open the report when you get this error, and you may have lost any unsaved changes.

ORA-00600: internal error code, arguments: [KGHLKREM1] error

Anyone faced this error before?
ORA-00600: internal error code, arguments: [KGHLKREM1], [0x43DB845F8], [], [], [], [], [], []
Thanks
PS: 11.5.10.2 db version is:10.2.0.3

Helios,
This is the only hit in Metalink (with the database version and argument you have).
Note: 470459.1 - ORA-600 [kghlkrem1]
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=470459.1
ORA-00600 errors are database internal errors, and the issue could be specific to your installation/database. Do not follow any steps in this link, instead log a SR and submit the trace file to Oracle Support (as suggested in the document).
Regards,
Hussein

10.8.2: FaceTime + Messages: internal error, won't start

Hello.
I've installed the 10.8.2 update and now I can't use FaceTime or Messages anymore. They won't even start up.
I always get this error message telling me that some internal error has occured and I need to quit and reopen the application.
I really need FaceTime and Messages on a daily basis. So this is a nightmare!
Before the update everything worked fine.
Every ten seconds(!) or so a new crash report is generated because some process called imagent crashed.
Here's the beginning of two crash reports:
Process: imagent[1120]
Path: /System/Library/PrivateFrameworks/IMCore.framework/imagent.app/Contents/MacOS/i magent
Identifier: imagent
Version: 8.0 (900)
Code Type: X86-64 (Native)
Parent Process: launchd [159]
User ID: 502
OS Version: Mac OS X 10.8.2 (12C54)
Report Version: 10
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Symbol not found: _OBJC_CLASS_$_IMInvocationForwarder
Referenced from: /System/Library/PrivateFrameworks/IMCore.framework/imagent.app/Contents/MacOS/i magent
Expected in: /System/Library/PrivateFrameworks/IMFoundation.framework/Versions/A/IMFoundatio n
in /System/Library/PrivateFrameworks/IMCore.framework/imagent.app/Contents/MacOS/i magent
and then one from FaceTime itself:
Process: FaceTime [357]
Path: /Applications/FaceTime.app/Contents/MacOS/FaceTime
Identifier: com.apple.FaceTime
Version: 2.0 (1080)
Build Info: FaceTime-1110000000000000~1
Code Type: X86-64 (Native)
Parent Process: launchd [160]
OS Version: Mac OS X 10.8.2 (12C54)
Report Version: 10
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Symbol not found: _IMCopyURLEscapedString
Referenced from: /System/Library/PrivateFrameworks/FTServices.framework/Versions/A/FTServices
Expected in: /System/Library/PrivateFrameworks/IMFoundation.framework/Versions/A/IMFoundatio n
in /System/Library/PrivateFrameworks/FTServices.framework/Versions/A/FTServices
[I didn't include the large part of the crash reports called Binary Images to keep this post short but I'm more than happy to do so if it's essential.)
What I have tried so far (without accomplishing anything at all):
- installed the 10.8.2 combo updater on top of everything
- deleted all preference files in my home library related to the imagent, ichat, FaceTime and Message (incl. the ByHost folder). And incl. the Cache folder.
- deleted all keys/entries in my key chain that are/seem related to FaceTime, Messages & imagent
- created a new admin user and tried to start FaceTime/Messages using this account
- I even repaired permissions (even thought this didn't look like a permissions issue).
I'm really quite frustrated as I can't seem to repair this.
I hope somebody reads this and knows just what I need to do to get FT & Message going again. That would be so much appreciated.
Thank you.

Hi,
IMAgent is a support app tucked away on the "System" side of things that helps with Messages (or iChat 6 in Lion) and the FaceTime App.
Basically what it does is Login the accounts and "Listen" for Off Line IMs and calls
For Messages it will start up the App if a Messages is sent to any of your IDs or Screen Names.
For FaceTime it will start up the app if someone calls you.
It is this IMFoundation item that you need to be "reinstalling"
Expected in: /System/Library/PrivateFrameworks/IMFoundation.framework/Versions/A/IMFoundatio n
If this is the file you "replaced" I would do a Mountain Lion Recovery and reinstall the whole OS.
11:37 PM Friday; September 21, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and and iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Internal Error in Specification workbench ( CG02)

Similar Messages

Maybe you are looking for