An internal error occured while calling 'processDPCommandsEx' API. (Error: ERR_WIS_30270)
Hi ALL,
I am facing a wierd issue while opening/refreshing/broadcasting a webi report.
The error message scrnshot:
This error is not throughout the reports, but for specific reports only, when checked the Bex query definition it works fine, but gives error for Webi reports.
Recently we had upgrade of BO 4.0 SP7 patch 9.
The reports are directly built on Bex queries, Bex queries contains simple Structures and few CKF's.
Would be thankful for any help recieved in resolving the above issue.
Regards,
Jaywant Kulkarni.
Hi jaywant,
Please check the note: 1760827 it may be helpful
( An internal error occurred while calling the 'processDPCommands' API. (ERR_WIS_30270) due to some scenarios.
Scenario 1:
Error occurs when try to refresh a migrated Web Intelligence report in InfoView, after entering a date or dates for prompts.
Suggested Solution:
Modify problematic report in Webi.
Change the prompt definition to be a constant, run the report in Webi, and save it.
Change the prompt definition back to prompt with required date definition. Make sure you are using the correct date format! (The report prompt should tell you what the format is supposed to be.) Re-run the report in Webi, and save it.
Re-open the report in InfoView and refresh.
Scenario 2: Error occurs when trying to edit the properties of a Webi report containing merged dimensions.
Suggested Solution:
Remove the merged dimensions and then re-establish them.
Scenario 3: Error occurs when the InfoView report has been open and idle for a long time.
Suggested Solution:
This error can be an indication of a time-out, based on the server’s settings. Make sure you save your work often. You will need to close and re-open the report when you get this error, and you may have lost any unsaved changes.
Similar Messages
-
Hi Team,
Please help me in resolving the below error message.
One of my user is experiencing this when trying to run a report.
"An internal error occured while calling u2018getBlobu2019 API. (error: ERR_WIS_30270)". I have checked the previous discussion on the same, But I could not get it. Could some one help me as what I can do to resolve this.
Thanks in Advance
MmviharHi George Pertea,
Appreciate your prompt response.
I found a simple solution for this.
This error message occurs when the TOMCAT server memory exceeds more than 1.3 gb. Hence, restart the TOMCAT server would resolve this issue.
Here are the steps in detail.
1. Log into each server through either citrix, remote desktop or mstsc from run command.
2. Click on task Manager.
3. Click on process, if you find TOMCAT memory is more than 1.3 gb, come back to CCM and stop tomcat server.
4. Wait for 20 seconds and then start tomcat server. Check all the remaining servers and do the same
This resolved the issue.
Thanks & Regards
Mmvihar -
An internal error occurred while calling 'submitReport' API. (Error: ERR_WI
An internal error occurred while calling 'submitReport' API. (Error: ERR_WIS_30270)
We get above mentioned error message at any point in WebI Rich Client.
DataSource: Teradata 12.0 (Local machine)
BO XI 3.1 Client installed on local machine
Universe (Secured connection)
WebI : desiging and creating in Standlone mode
WebI client version : 12.1.0.882
Many times above written error is thrown 2-3 times even when we click on OK button and lastly followed by new error message:-
Unable to get the first page of the current report - Web Intelligence will switch to structure view (WIJ 20003).
Flow: We create report based on locally saved universe. There are couple of scenarios for which error comes
1) After successfully saving the report, reopen and refresh causes this error (1st error and 2nd)
2) Droping a properly written variable on measure column, if done Ctrl + Z, report works sometimes (both or 2nd error message)
3) Draging out the mesaure or dimension from report (only 2nd error)
Report is simple and no other stuff except the cross tab table
Even if we start with simply dropping the dimension and measures on report, 2nd error comes at any time.
What we noticed is that if we do all desiging in structure mode and then run instead of in result mode, reports works for more time.You can have a look here:
Input Controls with Break Error on webi report
http://www.forumtopics.com/busobj/viewtopic.php?t=60789&postdays=0&postorder=asc&start=45
Re: internal error occurred while calling the 'submitReport' API.
I'm Back
HAPPY NEW YEAR -
"An internal error occured while calling 'answerPrompts' API.(Error: wis_30
Hi Gurus
Getting an error message while running a webi report from infoview link(server:8080/InfoViewApp/logon.jsp)
as
"An internal error occured while calling 'answerPrompts' API.(Error: ERR_WIS_30270)
I found that while selecting refresh checkbox in one of the query which is using .xls file from the local system this is showing above error while running from above link.
If it is unchecked it is running without any error.
while running report from webirichclient(where we are developing reports) it is running without any error.
Thanks in Advance
Regards
Ritu RajIt seems you are on SP3, and I assume the operating system of the BO server is Windows based.
Please cross-check that the Excel version you have matches the ODBC driver in the supported platforms document for XI3.1 SP3 [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4079f8f6-2b49-2d10-d790-bc596012dc25]
Second thing, I would like to see screenshots of what you mean by
"I found that while selecting refresh checkbox in one of the query which is using .xls file from the local system this is showing above error while running from above link.
If it is unchecked it is running without any error."
just to avoid misunderstandings from my side
Thanks!
Best regards,
Simone -
Hi,
I am using BOXI R3.1, when i open a Webi Report & getting one Error:
An internal error occured while calling 'getBlob' API. (Error: ERR_WIS_30270).
Do anyone know how to fix error?
Regards,Hi,
this is an old thread..
There are a great many potential reasons for this problem.
I would recommend you use our Knowledge Base search on SMP - link here: http://service.sap.com/xsearch
.. and search for terms : webi 'getBlob' API
Also, some information about your Product version and Patch level is requiered.
Also, any explanation of workflow -
does it only happen when opening report?
are you using OpenDoc hyperlink navigation?
Moving between report tabs?
Are many Schedules running concurrently at that time ?
regards,
H -
Hi All,
We are facing some weird WebI report corruption issues.
Issue is specific to only one report so far. We have seen this issue usually when we save the report to enterprise or do Save as.
Report gets corrupted at both the places; local and in repository.
The report have 5 Tabs, 3 queries from same database, Cross Tab, and approximately
15 Dimensions and around 500 Measures (From 3 Queries same universe and database)
Variables: 70 Measures and 10 Dimensions (created on report level)
Error Message while opening the report:
This error is generic. however there is no relevant SAP note for this on SMP. Even in trace I could not find much relevant details:
Please find the logs attached for WebI rich client tool.
Note: Change the extension of attached file to .zip and then extract
Thanks
SatishHi Jen,
Thank you for the response.
I am using WebI rich client in offline mode without connecting to CMS; still the working report crashes after making some changes while saving it. (we do refresh reports here)
Secondly, APS is already split and we have enough resources on the server, which anyways are not being used so far.
Even in logs do not see any instance for insufficient memory or crashing message.
Only connection server will come into picture when we use Rich Client all other task will be done be Rich client itself.
Thanks,
Satish -
Error Message: An internal error occured while calling 'openDocumentMDP' AP
Hi,
I am working on BO XIR3.1,
we have two acceptence environment and we use the same liscense key for both the environment.
i am trying to schedule a report in the acceptence environment and my scheduling is geting failed.
due to the reason below
Server Used: XXXXXXXX.AdaptiveJobServer
PID: 3444
Parent Object Path: Cust Reports/
Remote Instance in Federated Cluster: No
Expiry: 2/16/2022 8:59 AM
Formats: Web Intelligence
Parameters:
Error Message: An internal error occured while calling 'openDocumentMDP' API. (Error: ERR_WIS_30270) .
it is a very urgent issue ,kindly help me out to solve this issue.Thanks Amith,
You are getting error in all reports or particular report?
All the reports
These reports are migrated from one environment to other?
No,it was created in the same environment
what is the BO SP level?
SP 1
restart the SIA and then schedule report and see you are getting error or not?
I had done this ,and i am geting the same error.
Kindly help me out with a solution.
Regards
S.Cyril -
Internal Error occurred while calling the ProcessDPCommands API
We have installed Business Objects XI with MySQL. We are getting following error when we click on view query on the WEBI Reports
" Internal Error occurred while calling the ProcessDPCommands API Error WIS 30270".
When we change the CMS database to ORACLE everything works fine it looks like some issues when CMS database is MYSQL
Please hep to fix this problem
Installation is on Solaris 10
Edited by: AshishDatar on Nov 6, 2009 3:00 PM
Installation is on Solaris 10did you check whether universe connection is pointing to the correct db?The following url might be helpful:
[http://www.forumtopics.com/busobj/viewtopic.php?t=52355&view=previous] -
Hello all,
I execute a T-SQL query, which will retrieve large amount of data, however, I get an error message after a few seconde.
The error message is :
An error occurred while executing batch. Error message is: There is not enough space on the disk.
Who can tell me the reason and waht's the steps to solve this issue ?
Really thanks.
Thanks, Jed dengThe other two posters suggested that the problem with tempdb or you data/log files. This is not the case here. The error message relates to the client-side of things. Apparently SSMS needs to store data on disk. I don't recall exactly when this happens,
but I seem to recall that the files appear in you %TEMP% directory.
I would suggest that your correct action is to clean up the disk. Not the least there may be a lot of junk in your %TEMP% and %TMP% directories.
Erland Sommarskog, SQL Server MVP, [email protected]
Thanks Erland, I was not aware of this earlier. Now, I am able to find out one of the resons for slowness of SSMS gird. Also, I have just checked it with process monitor, SSMS is creating tmp%.tmp files..
- Chintak (My Blog) -
Hi
Can anyone help me resolve this problem.
Thanks. ACThanks. I entered "do nothing". Now able to export. Appreciate your help.
Warren singapore -
attempted to install newest version of itunes and now get 'runtime error' program: c:\program files (x86) r6034
Hey Debbiered1,
Follow the steps in this link to resolve the issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
When you uninstall, the items you uninstall and the order in which you do so are particularly important:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Take care,
Delgadoh -
Adcfgclone failing with RC-00110: Fatal: Error occurred while relinking of
Log file located at /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/log/VIS_infsgvm09/ApplyDBTier_12240910.log
- 0% completed RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack
ERROR while running Apply...
Mon Dec 24 09:13:43 2012
ERROR: Failed to execute /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/bin/adclone.pl
Please check logfile.
Logfile:
Started ApplyDBTier at Mon Dec 24 09:10:34 EST 2012
Version:
ApplyDBTier.java : 120.6.12010000.3
ApplyDBTier (prog) -1 true true true...
# Calling ApplyDBTechStack...
Executing runInstallDriver...
Started unzipping files...
Using admin directory: /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/bin
#------Log File time stamp: 1224091034------------
# $Header: CloneContext.java 120.92.12010000.25 2011/08/12 21:29:46 jaedo ship $
# Running on - infsgvm09
# Source Host - null
# Domain Name - sg.oracle.com
# Context Location - /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/VIS_infsgvm09.xml
# Context Type - null
# Context Template - null
# Clone Stage Area - null
# Pairs File - null
# Destination Context - null
# Validation - true
# Platform Migration - false
# no prompt - true
Checking Database Port on null: Port Value = 1521
Database Port available: Port Value = 1521
Checking DB ONS Local Port on null: Port Value = 6300
DB ONS Local Port available: Port Value = 6300
Checking DB ONS Remote Port on null: Port Value = 6400
DB ONS Remote Port available: Port Value = 6400
Completed runInstallDriver.
Executing home registration for s_db_oh...
instantiate file:
source : /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/template/adouidb.pl
dest : /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/ouicli.pl
backup : /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/ouicli.pl to /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/out/ouicli8.pl
setting permissions: 700
AC-00425: Setting permissions failed for file: /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/ouicli.pl
Raised by oracle.apps.ad.autoconfig.InstantiateProcess
setting ownership: r12ora:r12ora
instantiate file:
source : /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/template/config_ux.tmp
dest : /u01/oracle/VIS/db/tech_st/11.1.0/rdbms/lib/config.c
backup : /u01/oracle/VIS/db/tech_st/11.1.0/rdbms/lib/config.c to /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/out/config9.c
setting permissions: 700
AC-00425: Setting permissions failed for file: /u01/oracle/VIS/db/tech_st/11.1.0/rdbms/lib/config.c
Raised by oracle.apps.ad.autoconfig.InstantiateProcess
setting ownership: r12ora:r12ora
instantiate file:
source : /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/template/adlnkoh.sh
dest : /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh
backup : /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh to /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/out/adlnkoh8.sh
setting permissions: 700
AC-00425: Setting permissions failed for file: /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh
Raised by oracle.apps.ad.autoconfig.InstantiateProcess
setting ownership: r12ora:r12ora
Executing script in InstantiateFile:
/u01/oracle/VIS/db/tech_st/11.1.0/perl/bin/perl -I /u01/oracle/VIS/db/tech_st/11.1.0/perl/lib/5.8.3 -I /u01/oracle/VIS/db/tech_st/11.1.0/perl/lib/site_perl/5.8.3 -I /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/perl /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/ouicli.pl
script returned:
Beginning OUI CLI cloning for s_db_ohMon Dec 24 09:10:35 2012
/u01/oracle/VIS/db/tech_st/11.1.0/appsutil/jre/bin/java -classpath /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/java:/u01/oracle/VIS/db/tech_st/11.1.0/oui/jlib/OraInstaller.jar:/u01/oracle/VIS/db/tech_st/11.1.0/appsutil/java/xmlparserv2.jar oracle.apps.ad.clone.util.OracleHomeCloner -OUICLI -e /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/VIS_infsgvm09.xml -nolink -oaVar s_db_oh -homestub db -log /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/log/VIS_infsgvm09/ohclone.log
Running OUI CLI home cloning from within OracleHomeCloner:
/u01/oracle/VIS/db/tech_st/11.1.0/oui/bin/runInstaller -clone -silent -force -nolink -waitForCompletion -invPtrLoc /u01/oracle/VIS/db/tech_st/11.1.0/oraInst.loc ORACLE_HOME=/u01/oracle/VIS/db/tech_st/11.1.0 ORACLE_BASE=/u01/oracle/VIS/db/tech_st/11.1.0 ORACLE_HOME_NAME=VIS_DB__u01_oracle_VIS_db_tech_st_11_1_0 -J-Doracle.installer.noLink=true
Finished OUI CLI cloning for s_db_oh with return code: 0Mon Dec 24 09:12:04 2012
.end std out.
.end err out.
Executing script in InstantiateFile:
/u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh
script returned:
adlnkoh.sh started at Mon Dec 24 09:12:04 EST 2012
Log file located at /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/log/VIS_infsgvm09/make_12240912.log
Using make file "ins_emagent.mk" for linking SYSMAN utilities...
adlnkoh.sh completed sucessfully
.end std out.
chmod: changing permissions of `genclntsh': Operation not permitted
.end err out.
instantiate file:
source : /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/template/adouidb.pl
dest : /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/ouicli.pl
backup : /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/ouicli.pl to /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/out/ouicli9.pl
setting permissions: 700
AC-00425: Setting permissions failed for file: /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/ouicli.pl
Raised by oracle.apps.ad.autoconfig.InstantiateProcess
setting ownership: r12ora:r12ora
instantiate file:
source : /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/template/config_ux.tmp
dest : /u01/oracle/VIS/db/tech_st/11.1.0/rdbms/lib/config.c
backup : /u01/oracle/VIS/db/tech_st/11.1.0/rdbms/lib/config.c to /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/out/config10.c
setting permissions: 700
AC-00425: Setting permissions failed for file: /u01/oracle/VIS/db/tech_st/11.1.0/rdbms/lib/config.c
Raised by oracle.apps.ad.autoconfig.InstantiateProcess
setting ownership: r12ora:r12ora
instantiate file:
source : /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/template/adlnkoh.sh
dest : /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh
backup : /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh to /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/out/adlnkoh9.sh
setting permissions: 700
AC-00425: Setting permissions failed for file: /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh
Raised by oracle.apps.ad.autoconfig.InstantiateProcess
setting ownership: r12ora:r12ora
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[INSTANTIATE PHASE]
AutoConfig could not successfully instantiate the following files:
Directory: /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone
adlnkoh.sh INSTE8_APPLY
ouicli.pl INSTE8_APPLY
Directory: /u01/oracle/VIS/db/tech_st/11.1.0/rdbms/lib
config.c INSTE8
AutoConfig is exiting with status 3
RC-50013: Fatal: Instantiate driver did not complete successfully.
/u01/oracle/VIS/db/tech_st/11.1.0/appsutil/driver/regclone.drv
For help,thanks!!!!!
I'm right now working for clone a EBS 12.1.3 env.AC-00425: Setting permissions failed for file: /u01/oracle/VIS/db/tech_st/11.1.0/rdbms/lib/config.cAs root user, please change permissions on this file and make sure it is owned by the correct OS user (usually the database tier nodes are owned by oracle user).
The same error is reported in (How To Configure Apache In R12 (10.1.3) To Listen on a Restricted Port Such as 80 or 443 [ID 578001.1]) but the issue in the doc does not match the case you have. The doc clearly explains that setting permissions properly would fix the issue.
Thanks,
Hussein -
Error Occured while processing a Request-openning a another coldfusion page from old page link
in one page there is dynamic link in that i want to open anather page...
code is compiled ok and page is at place where i refered a link but it gives error 'error occured while processing a request'
Error Diagnostic Information
An error has occurred.
HTTP/1.0 404 Object Not Found
this error shows please help me...
i am new in coldfusion.
Thanks.Hi Salvatore,
This is a very wide error. You did not provided any other info as specified by Michael. Just a wild guess, this sort of error occurs generally when classpath or java_home properties are not set correctly. But, as i said it is very wide, some more info will be useful.
Regards
Chander Kararia -
Error occurred while opening Web Analysis document.
Hi all,
I've a problem when i try to open some web analysisi report from work space that first worked fine.
The error is:
Error occurred while opening document.
Error while executing query and retrieving data.; nested exception is:
com.hyperion.ap.APException: [1033] Native: -2147219967 Error Reference Number: {3507FEFB-B38E-4B36-9399-5F3E6B5FAC6A}<BR>Num: 0x80040601;Type: 1;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: CHsvADMDriverACM2.cpp;Line: 2360;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1491;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 804;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1245;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 804;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1203;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 804;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1067;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 804;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1390;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 804;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1331;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 804;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1292;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 603;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: CHsvADMDriverACM2.cpp;Line: 580;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: CHsvADMDriverACM2.cpp;Line: 785;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPWEB;File: CHsvDataQueryResults.cpp;Line: 209;Ver: 9.3.1.0.1502;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPWEB;File: HsvADMDriverSessionInternal.cpp;Line: 4353;Ver: 9.3.1.0.1502;
Can someone help me on this?
Thanks
Best Regards
E. G.Can anyone help me too?
-
Error occured while importing a map.
I have got two design repositories and two runtime repositories in the same database. One is for OWB 9.2.0.4.0 and another for OWB 10.1.0.3.0.
I was trying to export 1 mapping from a project in OWB10g to OWB9i where the said project does not exist. The export operation ran smoothly but the following error occured while the import operation:
Error at line 25: MDL1261: Error importing DATAWAREHOUSE RTS/RTS.
Detailed Error Message:
MDL1162: System Type not specified before integrator.
While importing the options i used were:
Import option -----Add new metadata only
Match by---------Universal identifier.
Please help.just a guess: while exporting use "physical names" in naming
Maybe you are looking for
-
BPM 5.7 MP3 Exception [Protocol [null] not supported.
Hi we recently started getting this error for each deployed project Each of my process instances goes to exception state and we are unable to understand this From log viewer PSGLProcessService::sourcePollProcess. Exception:fuego.directory.DirectoryRu
-
Where can I find Quictime's Library?
In order to AVI video I need to put drag the Xvid codec into Library/Quicktime, but I can't find it. Do I have to have Quicktime Pro in order to see it?
-
User NOT able to login again to BSP application after logging off
Hi Experts, What the user is doing? Step 1: User logged into BSP Application. Result: Successful login Step 2: User logged off from BSP Application. Result: Successful log off Step 3. User again tries to log into BSP Application with correct login cr
-
N73 - Appointments disappeared from standby screen...
Hi there, I just updated my N73's firmware to v.4.0839.42.21 and everything went fine, including backing up and restoring my contacts, appointments and to-do list. After the update, the next appointent showed up in the standby screen as usual. Deligh
-
H ow toTrack the "UOM" & RM details during sub contracting..
Hello experts, There is a scenario where in like am facing with my clients, my client company is a manufacturing company, as if now 75% of job was done through sub-contract only, and 25 % of job was done in their own wareh