InternalError: The current process uses to much Window Managerobjects!

Hi, I'm not quite sure in which sub-forum this belongs to. So I posted it here.
I'm only having the German error message. The subject is a short translation of the message.
"java.lang.InternalError: Der aktuelle Prozess verwendet alle Handles der zul�ssigen H�chstanzahl f�r Window Managerobjekte."
Can anyone tell me what may be wrong or what is usually the cause of such an error?
Just a short the description, what my program does at the moment:
It starts some calculations in a own thread to ensure a progress bar is painted. This is reaptead many times. After 50 to 60 runs this error occurs.
I guess, it may be that there are too much JDialogs are still open, but I can't see yet why this could be.
Cause I always create a new instance and leaving the method afterwards, It should be cleaned up properly.
/* main is just a ref to a JFrame (the main window) -- mainBar the ref to the progress bar of the main window -- actionPerformedFCoptional opens a JDialog with a new progressbar,
the dialogue is disposed in a finally-block of a try-catch-clause, which is guaranteed to be executed, cause the whole run-method is covered by this clause. Also the dialogue variable is local. */
            final Thread t = new TaxBaseCoroparteTaxCalc(this.main, this.mainBar).actionPerformedFCoptional(false);
         while (t.isAlive()) {
          System.out.println(t.getState());
          try {
              Thread.sleep(1000);
          catch (final InterruptedException ie) {
              ie.printStackTrace();
// end of method I will try setting t explicitly to null and to force the gc in the meantime, even I'm quite sure that isn't the cause.
Cause at the end of the method t should be collected anyway and the gc should run before any error is thrown.
Any help is appreciated.
Thanks a lot in advance.
Greetings Michael

See also:
*https://support.mozilla.org/kb/Firefox+is+already+running+but+is+not+responding
*http://kb.mozillazine.org/Profile_in_use
Make sure that you still have a default profile folder.

Similar Messages

Error While Deploying the BPEL Process using obant script

Hi All,
I am getting the following error while deploying the BPEL Process using obant script. we are using the BPEL Version 10.1.2.0.2.Any information in this regard will be really helpful.
Buildfile: build.xml
main:
[bpelc] file:/home5102/dibyap/saravana/Test/CreditRatingService.wsdl
[bpelc] validating "/home5102/dibyap/saravana/Test/CreditRatingService.bpel" ...
BUILD FAILED
/home5102/dibyap/saravana/Test/build.xml:15: ORABPEL-01002
Domain directory not found.
The process cannot be deployed to domain "default" because the domain directory "/opt02/app/ESIT/oracle/esit10gR2iAS/BPEL10gR2/iAS/integration/orabpel/domains/default/deploy" cannot be found or cannot b
e written to.
Please check your -deploy option value; "default" must refer to a domain that has been installed locally on your machine.
Total time: 23 seconds
dibyap@ios5102_ESIBT:/home5102/dibyap/saravana/Test>
Thanks,
Saravana

In 10.1.2.0.2 you need to create your own build.xml
I have found an example, it may be of some help. This does call a property file
cheers
James
<?xml version="1.0" ?>

<project name="ASB_EFT" default="main" basedir=".">

<property name="deploy" value="default" />

<property name="rev" value="1.0" />


<property file="ebusd.properties"/>
<property name="env" value="${env.name}"/>
<property name="current.project.name" value="${project.name}"/>
<property name="target.project.name" value="${project.name}_${env}"/>
<property name="deployment.profile" value ="${env}.properties"/>
<property name="source.development.directory" location="${basedir}"/>
<property name="target.env.directory" location="${basedir}/deploy/${project.name}_${env}"/>
<property file="${deployment.profile}"/>
<property name="build.fileencoding" value="UTF-8"/>

<target name="print.env" description="Display environment settings">
<echo message="Base Directory: ${basedir}"/>
<echo message="Deployment Profile: ${deployment.profile}"/>
<echo message="target.env.directory: ${target.env.directory}"/>
<echo message="Deploy to Domain: ${deployToDomain}"/>
<echo/>
<echo message="os.name: ${os.name}"/>
<echo message="os.version: ${os.version}"/>
<echo message="os.arch: ${os.arch}"/>
<echo/>
<echo message="java.home: ${java.home}"/>
<echo message="java.vm.name: ${java.vm.name}"/>
<echo message="java.vm.vendor: ${java.vm.vendor}"/>
<echo message="java.vm.version: ${java.vm.version}"/>
<echo message="java.class.path: ${java.class.path}"/>
<echo/>
<echo message="env: ${env}"/>
<echo message="current.project.name: ${current.project.name}"/>
<echo message="target.project.name: ${target.project.name}"/>
<echo message="server.name: ${server.name}"/>
</target>

<target name="create.environment">
<copy todir="${target.env.directory}">
<fileset dir="${basedir}"/>
<filterset begintoken="@" endtoken="@">
<filtersfile file="${deployment.profile}"/>
</filterset>
</copy>
<move file="${target.env.directory}/${current.project.name}.jpr" tofile="${target.env.directory}/${target.project.name}.jpr"/>
</target>
<target name="main">

<bpelc input="${basedir}/bpel.xml" rev="${rev}" deploy="${deploy}" />
</target>
</project>
here is a property file
project.name=ASB_EFT
env.name=ebusd
deployToDomain=default
server.name=[server]
server.port=7788
ebusd\:7788=http://[server]:7788/
IntegrationMailAccount=OracleBPELTest
IntegrationMailAddress=[email]
IntegrationMailPassword=[password]
archivedir=[directory]
inbounddir=/[directory]
errordir=[directory]
outbounddir=[directory]
bpelpw=bpel
dbhost1=[dbserver]
dbhost2=[dbserver]
dbport=1523
dbservice=bpel
dbconnstr=jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=[server])(PORT=1523))(ADDRESS=(PROTOCOL=tcp)(HOST=[server])(PORT=1523)))(CONNECT_DATA=(SERVICE_NAME=ebusd)))

How to get the current logged in username from windows and put it into an AS var

Hello,
I was hopeing someone would know how to get the current logged in username from windows and put it into a var, so I can create a dynamic text box to display it.
Thanks in advance
Michael

Just for everyone’s info, this is the script I have used to get the logged in windows username into flash ---- not and air app.
In the html page that publishes with the .swf file under the <head> section:-
<script language="JavaScript" type="text/javascript">
function findUserName() {
     var wshell=new ActiveXObject ("wscript.shell");
     var username=wshell.ExpandEnvironmentStrings("%username%");
     return username;
</script>
The ActionScript:-
import flash.external.ExternalInterface;
var username:String = ExternalInterface.call ("findUserName");
trace (username); // a quick test to see it in output

My interface -- buttons (back, forward, reload), firefox tab, groups, etc. -- does not look like the sample on your "firefox features" page. ("Groups" seems not to function at all.) I'm running the current firefox 4 download on Windows XP. Can you help?

My interface -- buttons (back, forward, reload), firefox tab, groups, etc. -- does not look like the sample on your "firefox features" page. ("Groups" seems not to function at all.) I'm running the current firefox 4 download on Windows XP. Can you help?

cor-el
Thank you for your swift reply. I don't know that this has helped me, as I've reached my level of tolerance for fooling with this annoying little problem - for today anyway. It has been going on since I "up" graded to Firefox 4. My wife is running 3.6.x on her laptop with none of this foolishness. As BLASPHEMOUS as it may sound, I've gone back to IE for the time being even though I don't like it 1000th as much as I do Firefox.
Not just to rant here, I would say that I found a way to put some buttons on the right side of the toolbar that immediately gave me permission to "back, forward, and reload", but upon closing the browser and going out for dinner with the wife, I find on return that not only are those buttons NOT still on the toolbar, but I can't find them anymore. I think they were in "add-ons" found under I believe Add-On Manager.
I did also manage to achieve back/forward functionality running Firefox in SAFE mode, but this meant no No-Script, among other things, and I've grown too fond of that particular little script to give it up.
I've rebooted, restored, and reinstalled, can't get this formerly completely reliable program to work like it always has. Before looking around on here, I was beginning to think it was my PC.
THANK YOU FOR YOUR HELP, cor-el. I'm going to see if I can get on live chat on Monday.
bossman344

Finding The Current Process ID

Is there a way to get the current process ID from a Java application running on Winows XP?
Better yet, is there a way to specify the process ID of your application from the command line?
I'm guessing the answer to the second question is no, but that there is an answer to the first question.
TIA,
John

The argument that getpid() is not available because it is not platform independent is not really very convincing.
It's quite likely that there are a number of platforms that don't have networking and therefore a large chunk of Java could be considered platform dependent. Of again it's likely that some platforms don't distinguish between output and error output streams so System.err and System.out would also seem platform dependent.
It's fairly clear that most platforms that we care to program for do have the concept of a process and most will also support the concept of a process identifier therefore in most cases getpid() would seem a reasonable api to support - for those platforms that do not support the concept of a process id we coud throw an exception or return null or whatever.
The process id would be useful for generating UUID's but another case where I've found if useful is passing it to databases as a connection parameter so that if/when a particular db connection is misbehaving I can trivially lookup the PID associated with that connection on the db and then go to the OS and find out which process instance owns that connection and debug/restart or whatever.

I moved my music from the c drive to the d drive. All of my music is in itunes but my ipod won't sync with itunes. The syncing process is taking much longer than usual too. I left my ipod over night to sync and it didnt finish. Fails to sync every time.

I moved my music from the c drive to the d drive. All of my music is in itunes but my ipod won't sync with itunes. The syncing process is taking much longer than usual too. I left my ipod over night to sync and it didnt finish. Fails to sync every time. I tried to restore my ipod and it didnt help.

Ignore. I figured it out:)

Communication between thread in the same process using file interface.

Hi,
I am developing driver and i need to communicate between two thread.
>can anyone guide me on implementing communication between two thread in the same process using File Interface. First thread will be driver and second will be application.I need to send IOCTL like commands using File interface ie is WriteFile(),ReadFile()
from Host process to driver through file-interface(which run's in driver context).Host process should not be blocked for the duration of the driver to process the command.
>File-interface will run in driver context and it will be responsible to receive command from application and pass it to the driver.
what are the complexity introduced?
>Can anyone also give me the link/reference to get more information on this topic?
>How to replace IOCTL command's for instance baud _rate change command with a file interface for example with IRP.

Here is the detailed query:
Hardware Abstraction Layer will interact with Driver(Both will be running in complete different process) .there is a IOCTL for command and File interface for read and write.
My requirement is:
Both should run in the same process so HAL will run as one thread and driver as another thread in the same process .I don't want HAL to wait for completion of request and also i don't want driver to be blocked .
We are planning to use a File Interface for communication between Hardware abstraction layer and Driver
HAL will send the command or read/write operation to a file interface and driver will get the command or read/write request from the File interface
There is a flexibility to change Hardware Abstraction layer and also the Driver
Is it possible to use IOCTL between two thread under same process? if not what other options do we have.
Can we use File interface to send command (like IOCTL) between two thread?

HT4101 When connecting my camera to my IPad mini via lightniing to usb camera adapter,I get "The attached accessory uses too much power" .Any solutions?

When I connect my Ipad mini to my camera via lightning to usb camera adapter all i get is a message "The attached accessory uses too much power."Any solutions

It depends on the camera, but some have a special mode for offloading photos but not trying to charge the camera through the USB port. For others, you may have to pull out the SD card (if that's what it uses) and use the Lightning to SD card reader instead.
Maybe if you told us what camera you are connecting, somebody here with the same model can give you more specific information.

How to get cwd of the current process in the kernel in Solaris 8

Hi, everyone
Does any one know how to get the path name of the current working directory of the current process in the kernel in Solaris8 ?
I searched the forum and got some related links, but none of them gives a clear solution.
Sample code can help a lot!
Thank you!

NiuLin wrote:
Thanks for the reply.
What the user structure contains is the vnode pointer of the cwd, but I want go get the pathname of it, like /export/home/abc/.First, all you can get is a path name - there can be more than one. And then there's the problem of determining the path name you want if the process is running under chroot.
Assuming you don't have to deal with those, there's this thread:
http://forum.java.sun.com/thread.jspa?threadID=5084620&messageID=9298124
Of course, that thread doesn't say how to do that. But it appears to be part of Solaris 10.
I once had to solve this same problem for a Linux kernel module I wrote, so I know it's theoretically possible. But I also know it's not as simple as it seems it should be, and any results you do get are not guaranteed to be unique and, IIRC, not even correct in some cases.
Sorry I can't be more specific than that right now.

The installation process of PSE9 on Windows 8.1 is interrupted late in the process with the comment

The installation process of PSE9 on Windows 8.1 is interrupted late in the process with the comment "could not install Shared Technologies". What is wrong?

Hi Cosse,
See this Adobe troubleshooting document:
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation -photoshop-elements-premiere.html#main_Error__Below_mentioned_applicat ions_have_failed_to_install__Shared_technologies_

HT4101 When I connect using the USB version I get a message on the ipad saying "the attached accessory uses too much power. What can I do?

Ipad2 Camera Connection Kit
When I connect using the USB option I get a screen on the ipad which says "Accessory Unavailable. The attached accessory uses too much power"
What should I do please?
David

I believe your camera uses a micro SD card. The CCK accepts the full size SD card. Do you have a SD card adapter to plug the micro into?
 Cheers, Tom

When I plug in my Olympus TG 820 to my iPad2 a message pops up warning me that the attached device uses too much power. Is there a way around this?

When I plug in my Olympus TG 820 to my iPad2 a message pops up warning me that the attached device uses too much power. Is there a way around this?

1. Turn off iPad
2. Connect camera to iPad
3. Turn on power of camera
4. Turn on iPad

HT4106 the "Accessory unavailable the attached accessory uses too much power" any suggestions ? it is an Olympus FE camera

Useing the camera connection with the USB cable the ipad says "Accessory unavailable the attached accessory uses too much power, the camera is an Olympus fe.

It depends on the camera, but some have a special mode for offloading photos but not trying to charge the camera through the USB port. For others, you may have to pull out the SD card (if that's what it uses) and use the Lightning to SD card reader instead.
Maybe if you told us what camera you are connecting, somebody here with the same model can give you more specific information.

Can I recover the database to the current time using a backup control file?

Can I recover the database to the current time using a backup control file? How far can I recover this database?
I have an Oracle 10g(10.2.3) database on RHEL4.3 system.
I have lost all the current control files and all the online redo logs, archived redo logs and all other files are OK.
Now I have to recovery this database using a backup control file.
Can I recover the database without any data lost？

If
a) it was a Shutdown Abort or an Instance Crash (i.e. backgrounds died on detecting loss of redo logs),
b) redo logs are lost
c) data files are intact
You'd have to
a) Restore datafiles
b) Do an Incomplete Recovery to the last available ArchiveLog
Hemant K Chitale
http://hemantoracledba.blogspot.com

Why is the iPhone 5 using so much data I have read a lot of complaints and I have went over on my plan and never have?

Why is the iPhone 5 using so much data I have read a lot of complaints and I have went over on my plan and never have?
I have even turned off LTE. Cut off my cellular data off of apps. Still uses data I switched back to my iPhone 4 cause I had used my
Data in 2 weeks!

I have the same problem on my 4S 64G: I updated to 7.1.1 and burned through my cellular data allowance without running anything that ought to be using it. I incurred an overage charge on Thursday, my new billing cycle started on Friday, and I immediately had used 3/4 of my allowance for the new cycle. I typically do not use my allowance in an entire month so burning through it in a day or two twice in one week is very much not right.
Possibly unrelated or not: last night I was out, did NOT use any apps that should use cellular data, and came home and my phone refused to connect to my home wifi despite turning this and that on and off. I burned cellular allowance while wifi was available.
It seems like someting on my phone, whether an app or the iOS itself, is using cellular data even while my phone is not in use. All I could do is turn off Cellular Data in Settings but that very much diminishes the usefulness of a phone that has served me well -- without data overages! -- for several years.
Please fix this, Apple!

InternalError: The current process uses to much Window Managerobjects!

Similar Messages

Maybe you are looking for