International Languages partially working

Dear Apple Discussions,
when I go into System Preferences -> International -> Languages and choose one other than English the changes are only partial.
For example, when I change to Japanese some of the apps. in the Application folder have the Japanese name. However none of the toolbar or input menus are in Japanese.
I have tried this in a new account as well with the same effect.
Also zapped the PRAM and NVRAM just for kicks.
I think remember having installed all the Languages since it didn't add that much to the disk usage. Besides, if it is partially working isn't that an indication of having it installed?
Is there some way of checking to see whether I have the languages installed?
Thanks and Happy Thanksgiving

Thanks for the quick response
The Japanese was only an example. However, it is relevant since I was wanting too show it to a Japanese colleague of mine. Not even my Finder is translated into Japanese.
However said colleague's new MacBook also running Leopard does show it in Japanese.
When I go into the Package Contents of the Finder I only find the English.lproj folder. Does this mean I didn't install the international languages after all? If not, then why do some of the apps. like Dictionary change their name if I switch to Japanese?

Similar Messages

ADRMAS and international language versions for Bus Partners

How will MDM address international language versions for vendor masters? Will it allow for matching on the these at this time? Will it copy from load client store in central repository and pass back down to other R/3 and legacy systems?

On Master Data Server (MDS) a Third Party Tool to check country-specific postal data can be connected. However these checks are only possible in the Enterprise Portal User Interface. It will not work during Consolidation (Upload from clients to MDS).

International Language Support - locale

Under Solaris 8 I install many international language locales. These included packages 32 and 64 bit versions, such as: SUNW5lue, SUNWweuos.. I install over 100 different locales, many double byte, for Japanese, Chinese, Korean, Latvian and many others.
I am unable to find these packages for Solaris 10. I have the Language CD but they are not there.
Where can I find these locales?
Thanks

It sounds like there are really two sets of questions here. First, how do you configure Workshop Studio to accept a project that doesn't conform to a WAR/EAR structure? Second, how do you develop localized Struts web apps in Workshop Studio?
The current version of Workshop Studio works best with one web application per project in more of a WAR structure. When AppXRay analyzes the project it searches for the WEB-INF/web.xml and tries to establish the webroot. Most likely the /web-common folder is your webroot and the /web-?? folders are not being validated. The next release of Workshop Studio is much more flexible in types of project layouts that it will accept and validate. Based on the information you have already provided about the project, this should work well with the new enhancements.
Regarding developing the international sites, have you considered taking advantage of Struts resource bundles as a means of managing localization? Without knowing more about the project its hard to tell if this is possible. If the localized pages basically identical, I can imagine anytime you want to make even a small change to these pages it could turn into a labor intensive process.
Fortunately, Workshop Studio simplifies development of Struts/JSF resource bundles and localization. The JSP design views render resouce bundle values on the fly. AppXRay provides code completion for resource bundle keys at the page level, provides hyperlink navigation to the resource key definitions, and validates usage against the property file definitions. You can also switch the rendering to a different locale in the IDE through the Text menu -> Resource Locale.. option. At that point all of your interactions would update the property file for the selected region.
To see more of this in action, check out the Struts flash demo on Dev2Ddev http://dev2dev.bea.com/downloads/StrutsDemo/StrutsDemo.html

Audio output will not work on external speakers. Internal speakers will work. What do i do to replace audio output slot

audio output will not work on external speakers. Internal speakers will work. What do i do to replace audio output slot

Right click your volume icon in the notification area and select "volume control options". From there, you should be able to select the external speakers.
I hope that helps!
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

IBook G4 fails to boot with internal HD installed, works when removed

The short version: My iBook started failing to boot via any method (gray screen) and the boot menu (Option during startup) would freeze. Replaced HD, things were better. Six months into new HD, nearly the same symptoms appear again. Removed HD, now running off different HD via FireWire.
The long version–
Back in late 2008-12, my iBook started failing to boot up. Usually it would refuse to boot from any source. Booting the internal disk (10.4.11) would get to a gray screen without any logo and stay there. Holding down Option, the boot menu would come up, but it would usually freeze before it displayed any volumes. Booting from CD (AHT, or OS install disc) would fail in nearly the same way as booting from the internal drive. Target Disk Mode would start, but once the other machine tried to access the drive, the FireWire logo would stop moving and the drive would never show up on the other computer. Very rarely, the machine would get a bit further through one of the boot mechanisms, but it usually froze while booting or just after login.
This machine has gone through three logic boards in the past, so I suspected that was the problem again. I took it to a local Genius Bar and the Genius explained that it was probably the hard drive. He said that sometimes, depending on the way the drive fails, it can "take out" other parts of the system due to drawing too much current, etc.
I was a bit skeptical, but it was going to be much cheaper to replace the HD myself than it would be to send it in for a MLB replacement. So I ordered a new HD (80G) and a USB-to-ATA/SATA adapter. I hoped that I would be able to use the adapter to savlage a bit more data off the drive (it originally failed right before a backup!).
After extracting the HD (40G), I connected it to the USB adapter and was able to access the drive just fine. I used another machine to run another backup from the recently removed HD (40G) to one of my FireWire backup drives and proceeded to put the iBook back together with the new HD (80G).
Once it was all back together, the new HD worked fine. I was able to restore the recent backup from my FireWire drive to the internal, and it worked fine. The only oddity I noticed was that the new drive was apparently trying to sleep several times a minute. I used smartctl (installed via MacPorts) to adjust the power management setting on the drive, and that seemed to help. I also started running smartd (also via MacPorts) to better monitor the new drive.
Recently, a bit more than six months after the new HD was installed, the new HD started showing errors in the system.log. I never found any errors in the logs after the previous HD failed (even though I could look through the logs just fine with the drive attached through the ATA-USB adapter).
Jul 2 18:04:40 Blinky kernel\[0]: disk0s3: I/O error.
Jul 2 18:33:43 Blinky smartd\[217]: Device: disk0, ATA error count increased from 0 to 30\n
Jul 3 02:03:42 Blinky smartd\[217]: Device: disk0, ATA error count increased from 30 to 31\n
Jul 3 03:03:42 Blinky smartd\[217]: Device: disk0, ATA error count increased from 31 to 32\n
Jul 6 23:33:42 Blinky smartd\[217]: Device: disk0, ATA error count increased from 32 to 33\n
Jul 7 00:33:42 Blinky smartd\[217]: Device: disk0, ATA error count increased from 33 to 34\n
Jul 7 12:42:24 Blinky smartd\[217]: Device: disk0, ATA error count increased from 34 to 36\n
Jul 7 13:17:59 Blinky kernel\[0]: disk0s3: I/O error.
+same error message a bit faster than one every 3 seconds+
Jul 7 13:23:00 Blinky kernel\[0]: disk0s3: I/O error.
Jul 7 13:33:44 Blinky smartd\[217]: Device: disk0, ATA error count increased from 36 to 615\n
Jul 7 21:17:05 Blinky kernel\[0]: disk0s3: I/O error.
Jul 7 21:17:12 Blinky kernel\[0]: disk0s3: I/O error.
Jul 7 21:17:12 Blinky kernel\[0]: disk0s3: I/O error.
Jul 7 21:17:12 Blinky kernel\[0]: disk0s3: I/O error.
Jul 7 21:17:15 Blinky kernel\[0]: disk0s3: I/O error.
Jul 7 21:17:18 Blinky kernel\[0]: disk0s3: I/O error.
Jul 7 21:17:21 Blinky kernel\[0]: disk0s3: I/O error.
Jul 7 21:17:23 Blinky kernel\[0]: disk0s3: I/O error.
Jul 7 21:17:29 Blinky kernel\[0]: disk0s3: I/O error.
Jul 7 21:18:17 Blinky kernel\[0]: disk0s3: I/O error.
Jul 7 21:19:21 Blinky kernel\[0]: disk0s3: I/O error.
Jul 7 21:19:23 Blinky kernel\[0]: disk0s3: I/O error.
I did not notice the errors until the afternoon of the 7th when the problem became evident. The events around 13:00 happened when I was trying to run a backup. The first backup failed in an odd way (when I came back to check on it later that evening, SuperDuper! seemed to have quit running). So I restarted the backup and started looking around in the logs. That is when I noticed the kernel I/O error messages. When I asked smartctl to query the drive, it showed that many errors had been occurring and it displayed the drive's log of the last five or so errors (alas, I did not save this output). Meanwhile the re-run of SuperDuper! was having problems again. It seemed to have hung (no SDAgent or SDCopy processes were running, but the main UI was still there). Since the backup was not getting anywhere, I decided to shutdown for a while and try again later.
When I did try again later, I was back in the situation of six months ago. It would not boot at all (no internal, no FireWire, no CD/DVD, boot menu hangs, Target Disk Mode hangs). So, I opened up the system, removed the HD and put it back together without an internal HD. The machine is now able to boot and run from FireWire. Again, the (6 month old, 80G) HD "works fine" via the USB adapter. If SMART were available through the USB adapter, I could check to see if the drive is continuing to have problems. I used SuperDuper! to copy the HD to a volume on my FireWire drive which is how I an now running the system.
Has anyone had any similar problems? Any idea why my iBook seems to be killing/rejecting hard drives? (I say killing because, while the drive is connected internally, it certainly seems to be dying. I say rejecting because once the drive is out of the system, both the drive and the system seem to "recover".) I have read messages there where others report success having their iBook MLB resoldered ("reball"). Has anyone experienced substantially similar issues that were solved with a resolder repair?
Thanks!

I was able to test my “failing” ATA drives in a G4 Mac mini (I had to take the mini apart because its drive had finally failed). I was able to successfully boot the Mac mini with either of my iBook drives installed. Once booted, +Disk Utility+ said that each one's SMART Status was Verified. I used smartctl to pull the full SMART info while I had them installed in the Mac mini.
Since the drives were still “good”, I think this emphasizes that the problem is with the ATA interface on my iBook's logic board. Maybe it is broken, or maybe it just needs to be resoldered. For now I am happy just booting off an external Firewire drive.
BTW, I ended up installing the 6 month old 80G drive in the mini. It has been working OK for 10 days now. As long as it continues to operate normally in the mini, it will serve as evidence that my iBook's HD ATA controller is borked. I just hope the ATA controller is more capable of accepting its fallibility than was HAL.
There is a minor problem with the 80G in the mini in that I am unable to use hdapm to change the aggressive head unloading that the drive suffers. I was able to adjust it with hdapm while it was in my iBook. I am able to adjust it with hdparm under Linux on the mini. Luckily the change I made while booted in Linux "sticks" after rebooting back into Mac OS X (I hear it will be lost if the drive is completely powered off though).

Internal speakers not working DV4-1225DX USING WINDOWS 7 64 BIT

DV4-1225DX USING WINDOWS 7 64 BIT. Internal speakers stopped working and orange mute light is on. Externaal speakers will work,

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp45001-45500/sp45073.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery, plug in the AC Adapter and start the notebook.
When Windows has fully loaded. Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.

Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.
Microphone works fine with Quictime on another mac, so I do know how to use it. The one where it is not working (A) had an external microphone and camera attached earlier, and indeed it does work with that external microphone, but not with the internal microphone selected; and (B) had RealPlayer installed previously.
Any suggestions, please?

Hi,
Download Audio driver from here.
Intructions how to install it in Vista/Win7.
Extract this driver with Winrar.
Open Device manager and expand the Sound, video and game controllers section.
Right click on Either the High Definition Audio Device if you have the generic Microsoft drivers, or the Conexant High Definition SmartAudio 221 if you have older Conexant drivers and choose "Update Driver Software..."
Click Browse my computer for driver software, then click "Let me pick from a list of device drivers on my computer"
Click "Have Disk..." then Browse to the folder where the drivers were extracted .......\V64 for 64-bit Vista/Win7. Click OK.
Select one of the "Conexant High Definition SmartAudio 221" models in the list, there will be multiple identical entries.
Click Next, and you're done.
I'm not sure which one from the list will work for You.
This drivers weren't test. So if You will try them and it will work for You let us now about.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Internal speakers not working after upgrading to Maverics

internal speakers not working after upgrading to Maverics

There are many possible causes for this issue. Take each of the following steps that you haven't already tried.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. Run Software Update and make sure you have a fully up-to-date installation of OS X.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. If you've installed a software equalizer called "Boom" or anything similar, update or delete it and restart.
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Reinstall OS X after backing up all data.
14. Make a "Genius" appointment at an Apple Store.

Internal Microphone not working for L505D-S5983 (PLEASE HELP!)

Hi,
I can't seem to get my internal microphone to work. I have enabled it under Sound->Manage Audio Devices
->Recording tab. However the green vertical bar does not detect any voice. After setting the Microphone boost to +40dB, it detected some noise (since it has some green light) but I realized it wasn't detecting my voice. Since this did not work, I re-set the Microphone boost to only +10dB. I only have one internal microphone and no external microphone.
I have seen many postings on internal microphones not working on Toshiba laptops but couldn't find a solution to mine. Can someone please help? I think it's about time that Toshiba fix this issue after the countless complaints.
FM.

No mentions of reinstalling the sound driver. That sometimes turns on the microphone.
Satellite L505D-S5983
   Realtek Audio Driver for Windows 7 (32/64)
Satellite L505-S5988
   Realtek Audio Driver for Windows 7 (32/64)
Satellite M500-ST6421
   Realtek Audio Driver for Windows Vista (32bit/64bit)
-Jerry

Get the fieldnames of a generic internal table or work area

Hi All,
I have one generic work area which I have created in the below manner...
* ET_DATA itself is a generic table of type ANY...can have any internal table data in it.
* Create dynamic internal table
CREATE DATA lv_new_table LIKE et_data.
ASSIGN lv_new_table->* TO <fs_dyn_table>.
* Create dynamic work area and assign to fieldsymbol.
CREATE DATA lv_new_line LIKE LINE OF <fs_dyn_table>.
ASSIGN lv_new_line->* TO <fs_dyn_wa>.
Now...I need to get the field names of this dynamic internal table or work area..
I have already searched in forum...got many answers..but none them gives me the output.
Please note that I require the field names and not field position..
Awaiting your suggestions on how to get field names of this dynamic work area...

create data wa_ref like line of it_data.
assign wa_ref->* to <p_data>.
desc_table ?= cl_abap_tabledescr=>describe_by_data( it_data ).
desc_struc ?= desc_table->get_table_line_type( ).
describe field <p_data> type rtty components ncom.
This one is working in our environment without any error. it_data is an importing parameter in the signature of a method of type any table.

Headphone Jack Glowing Red, Internal Speakers Not Working...

Hey, I have a 2.0GHz White MacBook (almost a week old), and I just recently came across this problem (this morning, actually). I usually have my MacBook connected to some external speakers through the headphone jack, the internal speakers are pretty terrible. Anyway, last night I left the computer on playing music as I fell asleep, this morning I woke up and the computer must have some how come unplugged from the AC power, as it was dead. I plugged it back in and everything was fine (I mean, it had to charge up, and the battery 'health' in iStat Pro was down to 93%, also not sure what this means... But everything else was fine). Then, I unplugged my external speakers and the jack was glowing red, I believe there's an LED inside. The internal speakers would then not work.
I did a quick Google search and discovered that this problem had been experienced on MacBook Pros. Someone recommended plugging in a set of headphones, I did so and then unplugged them and the internal speakers worked for a moment. I plugged in the external speakers again, and they worked (and work) fine. The problem is with the internals, they don't work, and plugging in my headphones again has not solved the problem, and the light is still on when the jack is not occupied.
Any ideas?
[edit] As of this writing, they are currently working, after plugging in the headphones again and unplugging them, however, the light still blinks when I do this, and there is a bit of a hesitation between the headphone being unplugged and the internal speakers kicking in... (longer than normal, I know there was always a slight delay, but this is a few seconds of blinking light and no sound).

you can fix this by "cleaning" the audio jack. the computer thinks that a digital output is connected. if you go to sound under system preferences, and it says digital output rather than internal speakers, then this is the problem.
I used a tightly rolled up piece of toilet paper to clean the jack. I twisted it up, stuck it in the jack, and then moved it around for a while. the red light went off and my internal speakers started working. someone else used a toothpick.
also, before i fixed this, i couldn't turn the volume up or down (unless i was using headphones) and the volume level screen that shows up on the screen had a circle with a line thru it...like the no smoking signs, but small and just under the volume bars.
http://discussions.apple.com/thread.jspa?messageID=3700681&#3700681
good luck

Language selector works fine but just for one language

Hi, I've got this language selector working for english language, it is just a combo box and a text label, you select the language in the combo box and it shows the label translated to that language, it works for english, but now I'm trying to make it work for Spanish. This is done in the commented part of the text but when I try to compile that part I get the error in this line:
Locale localizacion2 = Locale.ES;
as if Locale.ES does not exist.
I listed all the Locales and there it is an ES locale, and i did the same for both languages, can't find what's wrong...
I defined the Datos_en_US.properties file containing just this line:
TextLabel = Hellooooooooo
and it works fine
and I also defined the Datos_es_ES for the spanish translation.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.*;
public class Selector extends javax.swing.JFrame
private ResourceBundle resources;
private javax.swing.JLabel jEtSaludo;
private javax.swing.JButton jBtSaludo;
private javax.swing.JComboBox langList;
private javax.swing.JButton jbtAceptar;
private javax.swing.JLabel jlbGradosC;
public Selector()      // constructor
{ //loadResources();
    setSize(300, 200);      // tama�o del formulario
    setTitle("Language Selector"); // t�tulo del formulario
    initComponents();       // iniciar controles o componentes
    private void initComponents()//GEN-BEGIN:initComponents
   getContentPane().setLayout(null);
      addWindowListener(new java.awt.event.WindowAdapter()
          public void windowClosing(java.awt.event.WindowEvent evt)
          exitForm(evt);
      jlbGradosC = new javax.swing.JLabel();
      jlbGradosC.setText("TestLabel");
      getContentPane().add(jlbGradosC);
      jlbGradosC.setBounds(12,28,116,16);
      String[] langStrings = { "Espa�ol", "French", "Dutch", "Chinese", "Ingles" };
   langList = new JComboBox(langStrings);
   langList.setSelectedIndex(4);
   getContentPane().add(langList);
     langList.setBounds(42,90,204,30);
     jbtAceptar= new javax.swing.JButton();
     jbtAceptar.setText("Aceptar");
     getContentPane().add(jbtAceptar);
     jbtAceptar.setBounds(195,20,85,26);
   jbtAceptar.addActionListener(new java.awt.event.ActionListener()
      public void actionPerformed(java.awt.event.ActionEvent evt)
        jbtAceptarActionPerformed(evt);
}//GEN-END:initComponents
private void jbtAceptarActionPerformed(java.awt.event.ActionEvent evt)
Object nombre;
nombre = langList.getSelectedItem();
        System.out.println("Language--> " + nombre);
        if(nombre.equals("Ingles")){
            Locale localizacion = Locale.US; //en ingl�s
            ResourceBundle mensajes = ResourceBundle.getBundle("Datos",localizacion);
            jlbGradosC.setText(mensajes.getString("TestLabel"));
//else if(nombre.equals("Espa�ol")){
          // Locale localizacion2 = Locale.ES;
//          ResourceBundle mensajes2 = ResourceBundle.getBundle("Datos",localizacion2);
    //        jlbGradosC.setText(mensajes2.getString("TestLabel"));
/** Exit the Application */
private void exitForm(java.awt.event.WindowEvent evt) {//GEN-FIRST:event_exitForm
    System.exit (0);
}//GEN-LAST:event_exitForm
public static void main (String args[])
    new Selector().setVisible(true);
}But when I list all the available Locales using this class, I get the list below where it is es_ES
import java.util.*;
import java.text.*;
public class Available {
    static public void main(String[] args) {
     Locale list[] = DateFormat.getAvailableLocales();
     for (Locale aLocale : list) {
         System.out.println( aLocale.toString() +" "+ aLocale.getDisplayName());
}zgsdfg
ar �rabe
ar_AE �rabe (Emiratos �rabes Unidos)
ar_BH �rabe (Bahr�in)
ar_DZ �rabe (Argelia)
ar_EG �rabe (Egipto)
ar_IQ �rabe (Iraq)
ar_JO �rabe (Jordania)
ar_KW �rabe (Kuwait)
ar_LB �rabe (L�bano)
ar_LY �rabe (Libia)
ar_MA �rabe (Marruecos)
ar_OM �rabe (Om�n)
ar_QA �rabe (Qatar)
ar_SA �rabe (Arabia Saudita)
ar_SD �rabe (Sud�n)
ar_SY �rabe (Siria)
ar_TN �rabe (T�nez)
ar_YE �rabe (Yemen)
hi_IN hind� (India)
iw hebreo
iw_IL hebreo (Israel)
ja japon�s
ja_JP japon�s (Jap�n)
ko coreano
ko_KR coreano (Corea del Sur)
th tailand�s
th_TH tailand�s (Tailandia)
th_TH_TH tailand�s (Tailandia,TH)
vi vietnamita
vi_VN vietnamita (Vietnam)
zh chino
zh_CN chino (China)
zh_HK chino (Hong Kong)
zh_TW chino (Taiw�n)
be bielorruso
be_BY bielorruso (Bielorrusia)
bg b�lgaro
bg_BG b�lgaro (Bulgaria)
ca catal�n
ca_ES catal�n (Espa�a)
cs checo
cs_CZ checo (Chequia)
da dan�s
da_DK dan�s (Dinamarca)
de alem�n
de_AT alem�n (Austria)
de_CH alem�n (Suiza)
de_DE alem�n (Alemania)
de_LU alem�n (Luxemburgo)
el griego
el_GR griego (Grecia)
en_AU ingl�s (Australia)
en_CA ingl�s (Canad�)
en_GB ingl�s (Reino Unido)
en_IE ingl�s (Irlanda)
en_IN ingl�s (India)
en_NZ ingl�s (Nueva Zelanda)
en_ZA ingl�s (Sud�frica)
es espa�ol
es_AR espa�ol (Argentina)
es_BO espa�ol (Bolivia)
es_CL espa�ol (Chile)
es_CO espa�ol (Colombia)
es_CR espa�ol (Costa Rica)
es_DO espa�ol (Rep�blica Dominicana)
es_EC espa�ol (Ecuador)
es_ES espa�ol (Espa�a)
es_GT espa�ol (Guatemala)
es_HN espa�ol (Honduras)
es_MX espa�ol (M�xico)
es_NI espa�ol (Nicaragua)
es_PA espa�ol (Panam�)
es_PE espa�ol (Per�)
es_PR espa�ol (Puerto Rico)
es_PY espa�ol (Paraguay)
es_SV espa�ol (El Salvador)
es_UY espa�ol (Uruguay)
es_VE espa�ol (Venezuela)
et estonio
et_EE estonio (Estonia)
fi fin�s
fi_FI fin�s (Finlandia)
fr franc�s
fr_BE franc�s (B�lgica)
fr_CA franc�s (Canad�)
fr_CH franc�s (Suiza)
fr_FR franc�s (Francia)
fr_LU franc�s (Luxemburgo)
hr croata
hr_HR croata (Croacia)
hu h�ngaro
hu_HU h�ngaro (Hungr�a)
is island�s
is_IS island�s (Islandia)
it italiano
it_CH italiano (Suiza)
it_IT italiano (Italia)
lt lituano
lt_LT lituano (Lituania)
lv let�n
lv_LV let�n (Letonia)
mk macedonio
mk_MK macedonio (Macedonia)
nl Neerland�s
nl_BE Neerland�s (B�lgica)
nl_NL Neerland�s (Holanda)
no noruego
no_NO noruego (Noruega)
no_NO_NY noruego (Noruega,Nynorsk)
pl polaco
pl_PL polaco (Polonia)
pt portugu�s
pt_BR portugu�s (Brasil)
pt_PT portugu�s (Portugal)
ro rumano
ro_RO rumano (Rumania)
ru ruso
ru_RU ruso (Rusia)
sk eslovaco
sk_SK eslovaco (Eslovaquia)
sl eslovenio
sl_SI eslovenio (Eslovenia)
sq alban�s
sq_AL alban�s (Albania)
sr serbio
sr_BA serbio (Bosnia y Hercegovina)
sr_CS serbio (Serbia y Montenegro)
sv sueco
sv_SE sueco (Suecia)
tr turco
tr_TR turco (Turqu�a)
uk ucranio
uk_UA ucranio (Ucrania)
en_US ingl�s (Estados Unidos)
en ingl�s

Thanks anyway.
This is a very stupid question and maybe for another post, but I couldn't try the class you posted here
http://forum.java.sun.com/thread.jspa?threadID=5203492
because I couldn't compile it because I downloaded the library and got the folder in for example here:
C:\Documents and Settings\Mis documentos\softsmithy-v20070520\softsmithy-v20070520\src\org\softsmithy\lib
From there I added them one by one to my own folder (the one where I have my Java projets and where I downloaded the class you posted) and then I started recompiling each class I was asked for when started compiling the class you posted, but there are so many classes in the library, each one needed to compile the other and I don't know how to compile all at once or include the whole library as a package..
Message was edited by:
drholiday

Internal table declaration - work area and body

Hi all
I have declared my internal table in my program as
data : itab_wa type ZRESULT_LINE,
       itab    type ZRESULT_ROW.
Where ZRESULT_LINE and ZRESULT_ROW are the structure and table types.
Now I want to add
data: TCOLOR TYPE SLIS_T_SPECIALCOL_ALV.
in my internal table declaration. How can I do this. Please remember I need to have work area and body in my internal table as I have used work area and body in my code.
Waiting..............
Message was edited by: Raju Boda

HI,
See the Declarion types of workarea and Internal tables
* Table declaration (old method)
DATA: BEGIN OF tab_ekpo OCCURS 0,             "itab with header line
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
END OF tab_ekpo.
*Table declaration (new method)     "USE THIS WAY!!!
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,      "itab
      wa_ekpo TYPE t_ekpo.                    "work area (header line)
* Build internal table and work area from existing internal table
DATA: it_datatab LIKE tab_ekpo OCCURS 0,      "old method
      wa_datatab LIKE LINE OF tab_ekpo.
* Build internal table and work area from existing internal table,
* adding additional fields
TYPES: BEGIN OF t_repdata.
        INCLUDE STRUCTURE tab_ekpo. "could include EKKO table itself!!
TYPES: bukrs TYPE ekpo-werks,
       bstyp TYPE ekpo-bukrs.
TYPES: END OF t_repdata.
DATA: it_repdata TYPE STANDARD TABLE OF t_repdata INITIAL SIZE 0,   "itab
      wa_repdata TYPE t_repdata.                 "work area (header line
you need to maintain same structure for both workarea as well Internal table
Regards
Sudheer

Internal table and work area

Hi,
can anybody explain the concepts of Internal table and work area.Thanks in advance.

hai,
This may help u.
WORKAREA is a structure that can hold only one record at a time. It is a collection of fields. We use workarea as we cannot directly read from a table. In order to interact with a table we need workarea. When a Select Statement is executed on a table then the first record is read and put into the header of the table and from there put into the header or the workarea(of the same structure as that of the table)of the internal table and then transferred top the body of the internal table or directly displayed from the workarea.
Each row in a table is a record and each column is a field.
While adding or retrieving records to / from internal table we have to keep the record temporarily.
The area where this record is kept is called as work area for the internal table. The area must have the same structure as that of internal table. An internal table consists of a body and an optional header line.
Header line is a implicit work area for the internal table. It depends on how the internal table is declared that the itab will have the header line or not.
e.g.
data: begin of itab occurs 10,
ab type c,
cd type i,
end of itab. " this table will have the header line.
data: wa_itab like itab. " explicit work area for itab
data: itab1 like itab occurs 10. " table is without header line.
Internal tables are used for storing records which are obtained as a result when we use select statement on database. internal tables are run time entities and doesn't occupy any memory. they are dynamic.
internal tables are of types.
1. internal tables with header line. [header and body]
2. internal tables with out header line. [only body]
Workarea is the concept which is mainly useful when working with internal tables with out header line.
at any point of time we can access only one record through header of a internal table. every thing should be done [inserting,modifying, reading ] through header only.
ex: data: itab like standard table of mara with header line.
for internal tables with out header line we will create a work area [explicit header] as type of table for storing data into internal table.
ex: data: itab like mara,
wa like mara.
more about internal table types:
Standard table:
The key access to a standard table uses a sequential search. The time required for an access is linearly dependent on the number of entries in the internal table.
You should usually access a standard table with index operations.
Sorted table:
The table is always stored internally sorted by its key. Key access to a sorted table can therefore use a binary search. If the key is not unique, the entry with the lowest index is accessed. The time required for an access is logarithmically dependent on the number of entries in the internal table.
Index accesses to sorted tables are also allowed. You should usually access a sorted table using its key.
Hash table:
The table is internally managed with a hash procedure. All the entries must have a unique key. The time required for a key access is constant, that is it does not depend on the number of entries in the internal table.
You cannot access a hash table with an index. Accesses must use generic key operations (SORT, LOOP, etc.).
Hashed tables
This is the most appropriate type for any table where the main operation is key access. You cannot access a hashed table using its index.
The response time for key access remains constant, regardless of the number of table entries. Like database tables, hashed tables always
have a unique key. Hashed tables are useful if you want to construct and use an internal table which resembles a database table or for
processing large amounts of data.
TYPES VECTOR TYPE HASHED TABLE OF I WITH UNIQUE KEY TABLE LINE.
TYPES: BEGIN OF LINE,
COLUMN1 TYPE I,
COLUMN2 TYPE I,
COLUMN3 TYPE I,
END OF LINE.
DATA ITAB TYPE HASHED TABLE OF SPFLI
WITH UNIQUE KEY CARRID CONNID.
with regards,
B.Sowjanya,
reward points if helpful.

When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

If you see a red light in the audio output port, then the internal switch is stuck. Insert the earphone plug a few times and see if you can trip the switch. If that fails, insert a cocktail stirrer and the like and jiggle it around inside. If that fails, take it to an Apple store and have the technicians at the genius bar do it for you.
Ciao.

International Languages partially working

Similar Messages

Maybe you are looking for