Internet access from Solaris 10 server

HI
we have Sparc T-4 servers running solaris 10. i need one of the servers to be able to reach to Internet. However i am not able to even ping 8.8.8.8 .
i am able to browse internet using firefox after i changed the proxy settings in the browser.
can some one help in steps to configure internet access. i am installing Ops Center and it needs connectivity to reach to My Oracle Support over Ineter Net.
thanks
-Muneer

If you are able to browse with Firefox on your server then Internet works.
If you have some troubles with Ops Center, you should certainly configure the HTTP_PROXY/HTTPS_PROXY variables and in this case I suggest to push your question in the Ops Center community : Oracle Enterprise Manager Ops Center (MOSC)

Similar Messages

I HAVE AN IPAD 2 WITH WIFI ONLY, CAN I GET INTERNET ACCESS FROM ANY SMARTPHONE, OR DO I NEED A SPECIFIC PHONE FOR THIS?

i ave an ipad 2 with wifi only, can i get internet access from any cell phone, or do i need a specific phone or type of phone

I received an iPad 2 for Christmas (the 1st Apple item I've ever owned!) and own a Nokia N95 8GB mobile (that's pretty much on its last legs/ready to die any day).
On the Nokia I've got 2 apps (downloaded from/via Nokia's 'Ovi' app store): JoikuSpot & HandyWi. Both are the free versions.
I've not used HandyWi much - if at all - but JoikuSpot has been great. Basically, it creates a wifi hotspot (as pjl123 mentioned) in a couple of straightforward steps, and allows a few devices to be connected. It displays who/what is connected at a given time - so you can check if the guy having coffee behind you is piggybacking your hotspot or not! - data packets sent received etc.
The paid version has the benefit of allowing you to secure the hotspot and other security features. Their website is www.joiku.com, FYI.
Given how slow behind the 8 ball Nokia has been, their phones are getting cheaper and cheaper - given Joiku's meant to work with Nokia S60, Symbian ^3, Maemo, Meego & Sony Ericsson S60, this might be a cost effective option.
Ps. Ah! One more thing - Joiku's website specifies that 3G must be used; that WAP will not work. Good luck, enjoy!

Internet Access from Inside to Outside ASA 5510 ver 9.1

Hi everyone, I need help setting up an ASA 5510 to allow all traffic going from the inside to outside so I can get internet access through it. I have worked on this for days and I have finally got traffic moving between my router and my ASA, but that is it. Everything is blocked because of NAT rules I assume.
I get errors like this when I try Packet Tracer:
(nat-xlate-failed) NAT failed
(acl-drop) Flow is denied by configured rule
Version Information:
Cisco Adaptive Security Appliance Software Version 9.1(4)
Device Manager Version 7.1(5)
Compiled on Thu 05-Dec-13 19:37 by builders
System image file is "disk0:/asa914-k8.bin"
Here is my ASA config, all I want for this exercise is to pass traffic from the inside network to the outside to allow internet access so I can access the internet and then look for specific acl's or nat for specific services:
Thank You!
Config:
ASA5510# sh running-config
: Saved
ASA Version 9.1(4)
hostname ASA5510
domain-name
inside.int
enable password <redacted> encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd <redacted> encrypted
names
dns-guard
interface Ethernet0/0
description LAN Interface
nameif Inside
security-level 100
ip address 10.10.1.1 255.255.255.252
interface Ethernet0/1
description WAN Interface
nameif Outside
security-level 0
ip address 199.199.199.123 255.255.255.240
boot system disk0:/asa914-k8.bin
ftp mode passive
dns domain-lookup Outside
dns server-group DefaultDNS
name-server 199.199.199.4
domain-name
inside.int
object network inside-net
subnet 10.0.0.0 255.255.255.0
description Inside Network Object
access-list USERS standard permit 10.10.1.0 255.255.255.0
access-list OUTSIDE-IN extended permit ip any any
access-list INSIDE-IN extended permit ip any any
pager lines 24
logging enable
logging asdm informational
mtu Inside 1500
mtu Outside 1500
mtu management 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-715.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (Inside,Outside) source dynamic any interface
object network inside-net
nat (Inside,Outside) dynamic interface
access-group INSIDE-IN in interface Inside
access-group OUTSIDE-IN in interface Outside
router rip
network 10.0.0.0
network 199.199.199.0
version 2
no auto-summary
route Outside 0.0.0.0 0.0.0.0 199.199.199.113 1
route Inside 172.16.10.0 255.255.255.0 10.10.1.2 1
route Inside 172.16.20.0 255.255.255.0 10.10.1.2 1
route Inside 192.168.1.0 255.255.255.0 10.10.1.2 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
http server enable
http 0.0.0.0 0.0.0.0 Inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpool policy
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 Inside
ssh timeout 60
ssh version 2
ssh key-exchange group dh-group1-sha1
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
username <redacted> password <redacted> encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns migrated_dns_map_1
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns migrated_dns_map_1
inspect ftp
inspect h323 h225
inspect h323 ras
   inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http
https://tools.cisco.com/its/service/oddce/services/DDCEService
   destination address email
[email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
   subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
password encryption aes
Cryptochecksum:
<redacted>
: end
SH NAT:
ASA5510# sh nat
Manual NAT Policies (Section 1)
1 (Inside) to (Outside) source dynamic any interface
    translate_hits = 0, untranslate_hits = 0
Auto NAT Policies (Section 2)
1 (Inside) to (Outside) source dynamic inside-net interface
     translate_hits = 0, untranslate_hits = 0
SH RUN NAT:
ASA5510# sh run nat
nat (Inside,Outside) source dynamic any interface
object network inside-net
nat (Inside,Outside) dynamic interface
SH RUN OBJECT:
ASA5510(config)# sh run object
object network inside-net
subnet 10.0.0.0 255.255.255.0
description Inside Network Object
Hi all,Hello everyone, I need some help before my head explodes. Idddddddd

Hello Mitchell,
First of all how are you testing this:
interface Ethernet0/0
description LAN Interface
nameif Inside
security-level 100
ip address 10.10.1.1 255.255.255.252
Take in consideration that the netmask is /30
The Twice NAT is good, ACLs are good.
do the following and provide us the result
packet-tracer input inside tcp 10.10.1.2 1025 4.2.2.2 80
packet-tracer input inside tcp 192.168.1.100 1025 4.2.2.2 80
And provide us the result!
Looking for some Networking Assistance?
Contact me directly at [email protected]
I will fix your problem ASAP.
Cheers,
Julio Carvajal Segura
Note: Check my website, there is a video about this that might help you.
http://laguiadelnetworking.com

No internet access from WRT54G router -see details please-

I have a westell 6100 modem with Verizon high speed internet.
I was given these instructions for my modem by Verizon for the router to work and it still doesn't. what do I need to do?
3. Click on Network Connections in the left navigation menu.
4. Click on Broadband Connection (DSL) to continue to the Broadband Connection.
5. Locate the VPI VCI of 0 & 35 under VCs and click the Edit icon.
6. Verify that the VC Status is Enabled and that the VPI & VCI are 0 and 35 respectively.
7. Change the Protocol drop down menu to Bridge then change the Bridge Mode: drop down menu to Bridge and click Apply.
8. Select OK to allow the modem to reset and apply the new changes.
9. Click on My Network in the top navigation bar.
10. Click on Network Connections.
11. Click on LAN.
12. Remove the check mark from the Private LAN DHCP Server Enable field.
13. Verify that the Private LAN is now off and click on Apply.
windows 7
I can connect to "linksys" as a wireless network, but get no internet access. Please help! Thank you!

The settings that you provided is for the modem so I suppose you can able to go online with modem… Please let me know the IP address that you receiving from the modem… Since the connection that you have is DSL connection and if you are receiving the IP address from the modem under LAN (Local Area Connection) is a Private IP address (192.168.X.X) then follow the steps:
# Connect the modem with the Linksys Router WRT54G on the Internet Port and then connect the Computer on any of the Ethernet Port on the Router (Numbered – 1, 2, 3 and 4)…
# Open up the browser and on the address bar type 192.168.1.1 that will open up the Router setup page…
# Look for the Local IP Address and change it to 192.168.2.1 …
# Click Save Settings...
# Then Click on wireless Tab create the Wireless Network Name SSID and select the channel to 6, 9, and 11… Click Save Settings...
# Then Click on Wireless Security sub tab and select the security mode and provide the password as per the requirement… Click Save Settings...
# Click on Status Tab on the Router Setup page check if Internet IP Address has numbers or values. If the Internet IP Address has numbers, the computer should now be able to access the Internet. If the IP address is all zeroes (0.0.0.0) click "IP Address Release" first then click "IP Address Renew". If the IP address is still all zeroes, enable PPPoE on the router.
To enable PPPoE on the router you should have a username and password provided by the ISP (Internet Service Provider) and follow the steps...
# Under the Setup tab, set the Internet Connection Type to PPPoE…
# Enter the Username and Password that your ISP provided, including the domain in the User Name field if necessary…
# Click Save Settings...
# Then Click on wireless Tab create the Wireless Network Name SSID and select the channel to 6, 9, and 11… Click Save Settings...
# Then Click on Wireless Security sub tab and select the security mode and provide the password as per the requirement… Click Save Settings...
# Click the Status tab then look for Login Status and check if it says Connected. If it’s connected, you should be able to access the Internet.
After doing the following settings then connect the wireless computer the preferred Network… Once it gets connected you will be online wirelessly as well…

Time Capsule - how to gain "over-the-internet" access from Windows 7!

Hi guys,
I've been fighting for such a long time with my Time Capsule. I have no idea how to gain access "over-the-internet" on a PC (Windows 7) which is running on another network. My Time Capsule is set up with my Macbook Pro at home running Lion OSX, and i have internet connection. My brother who also uses Macbook has no problems connecting to my Time Capsule - through finder (connect to a server). But how do I gain "over-the-internet" access to my Time Capsule through a PC (Windows 7) from my office? Is there please someone who can guide me step-by-step, how to gain connection to my TC through a PC? Or maybe just an explantaion what has to be done on the PC before this thing can work out! This was the main reason to why i bought Time Capsule - besides of the Time Machine function. I also have an iCloud account (earlier Mobile Me), if that makes any difference.
Thanks!

There is no way to do it from windows direct to the TC.
It only presents AFP to the WAN side. And most ISP block SMB from internet access due to risks. There is AFAIK, no suitable AFP protocol utility for windows at the moment. If you google and find one, be aware it probably will not work to your satisfaction anyway.
You must use a Mac to access AFP but even then it is not a secure protocol and I would recommend against it anyway.
So basically if you had have asked before purchasing, I would have said, TC is unsuitable product. It is a backup drive for a Mac. It is not a NAS.. it is not designed for remote access by any computer other than a Mac. It does not support any other file protocol to the WAN interface.. and no secure protocol even there.
A NAS with Time Machine extensions from QNAP, Synology, Netgear all are designed for web access and are far more suitable. Researching a purchase beforehand is always worthwhile.
Anyway, your choices are.. return the TC and buy something more suited to the job.
Or if return is now impossible sell the TC on ebay.. etc and do the same thing.. buy a more suitable NAS.
Or buy a cheap mac mini (even second hand) and use that for communications with home.
Or, replace your current router with something that includes vpn. This is actually a good and commercially sound decision. VPN is generally used by business to connect to remote locations, because it is secure and will allow the greatest flexibility of connection. How hard or easy depends on the current setup. I would recommend a combined modem router with vpn server if you have adsl. Or for cable you can find plenty of routers with combined vpn. You can also use those for adsl if your ISP allows pppoe with bridged modem. The TC will have to be bridged as well. For other broadband it might be harder to find the right kind of box.
Once you setup a vpn you can access it from work using the appropiate vpn client in your work computer.

Mi424wr-gen3I no internet access from secondary subnet / router

All,
I am looking to provide internet access to my internal LAN / WLAN devices on another router. I have configured my second router to connect to the 192.168.1.0/24 network on the mi424wr LAN.
Static routes: 192.168.2.0/24 next hop 192.168.1.254 (secondary router interface connected to m1424wr LAN)
Firewall policy filter: Network Home Inbound and outbound allow access sourced and destined to both subnets.
I have layer 3 conectivity between the routers but I am not able to browse the internet from secondary router 192.168.2.0 network. My default router on the 192.168.2.0/24 is the 192.168.1.1 router.
I tried to modifiy the DNS setting for devices on the 192.168.2.0 net but nothing works. Used 192.168.1.1 (mi424wr interface which the setting for the 192.168.1.0 net devices. Even tried using verizon's DNS server 68.237.161.12 but no internet access. The mi424wr does have a dns server setting which I tried to statically add 192.168.2.x host but that did not work.
So I am not sure if the mi424wr DNS server is not allowing any other subnets beside the 192.168.1.0/24 to access its DNS services or some other policy is needed to be created. My secondary router is not NATing and at a loss.
Tried to research other methods of using my secondary router to connect to internet with the mi424wr-gen3I but nothing seems worth trying. Setting the mi424wr-gen3I to bridge mode would be an option but have not seen any configuration for the REV I router vesion. My last setup worked in bridge mode and STB were functional but VOD was always very choppy. Seem there are some QoS setting the mi424wrI has configure to improve traffic priority for video.
Any assistance appreciated.
Rich

As STX said. All you need to do is to connect an ethernet cable from a lan port of the Verizon router to the wan port of your own router. Your own router needs to be configured with an address on the 192.168.1 subnet, either dhcp or static, yours is you say at 192.168.1.254 as is mine. Then you should have configured the dhcp side of your router with a subnet other than 192.168.1 which apparently you have done. You do not need static routes or anything else for devices on the 192.168.2 subnet to access the internet, other than valid DNS server addresses - did you set valid dns servers addresses in the static ip internet connection on your router? You could set it to 192.168.1.1 and pick up whatever dns the vz router is using or you could set it dns servers of your choice, personally I set mine to opeDNS server addresses.
What kind of router is the second router?
Your description of your setup sound OK and the only difference I see between your setup and mine is that you say your second router is not NATing

No internet access from my airport

Hi there,
I have a problem with my two airport express. I'll explain first my config
I have one Router (from the internet provider so not apple) connected to an ADSL line with ethernet hardwired Conections to both Airport express.
the to AE have the same name (SSID) and password and are configured as Create a new Network. this allow me not only to extend my Network reach but also to use the jack conections in 2 different rooms for 2 difrerent Hifi systems for the airplay feature. they are in bridge mode.
the Router from my Internet provider as a different SSID on purpose because I don't want my computer to connect to that one when I'm closer to it since I always had more transmission problems with the airplay when connected to a non apple Router. the sound is often cut while with the AE it always flows better.
the problem is that the airplay works but the internet connection is very bad, I mean it last minutes to open a page, and if I want to surf from my computer I have to choose the other SSID and then no problem.
when I open the airport utility I can see that sometimes it's all green but the internet switch constantly from green to yelow.
I'm just in the process of changing my internet provider which means that I actually have in this moment 2 internet connections and 2 routers from 2 diff providers and therefore have made the test with boths of them with the same result.
that's it. Any idea?
thanks in advance

Hi,
this is getting worse. as I was unable to solve the problem I decided to start from scratch and therefore I have reset to default values my 2 Airports.
then in my airport utility I only have the Internet access, the earth globe, and it's green, so I can surf the web by connecting to the SSID of the router of my internet provider.
then I plug into the power one airport. It appears in the left-hand upper corner of the Airport utility. I click on it ( at that moment my wifi is not anymore to the Internet router but to the airport itself) and follow the steps to configure it.
it say that it will be configured to create a network so I give him same SSID and pwd as the one from the OLO provider, it tells me to connect the cable to the Router, i do it and it goes to the next step where it asks me to switch off for few minutes the internet router and switch it on again. I do it and after a while it says that an error occured while confiring the airport.
At that moment I loose access to my airport, I does not appear neither on the Wifi panel as its MAC address (or whatever the hexa number is) nor within the airport utility as an airport connected to my internet router.
so the only way left to get back to it is to reset it again.
I did this process with the 2 airports, and met the same problem so I guess I'm doing something wrong.
where is my mistake ?
thanks in advance.

Configure ODBC to access a CSV file on Linux for access from BI Server

How to configure an ODBC connection to a CSV file on Linux for access from the BI Server Repository physical layer
I am migrating a working windows OBIEE installation to Linux and can not seem to connect to csv files on Linux (from th BI server also running on the same Linux machine).
I am using SUse Linux Enterprise server / 10 (Slash 10) standard odbc drivers
My odbc ini file entries are:
[ODBC]
Trace=0
TraceFile=odbctrace.out
TraceDll=/app/oracle/product/10.1.3/OracleBI/odbc/lib/odbctrac.so
InstallDir=/app/oracle/product/10.1.3/OracleBI/odbc
UseCursorLib=0
IANAAppCodePage=4
[ODBC Data Sources]
AnalyticsWeb=Oracle BI Server
Cluster=Oracle BI Server
SSL_Sample=Oracle BI Server
idcbicsvfiles=Odbc Text driver
[idcbicsvfiles]
Description = Odbc Text driver
Driver = Odbc Text driver
Directory = /data/oracle/OracleBIData/idc
#ReadOnly = No
#CaseSensitive = No
#Catalog = No
ColumnSeperator = ,
#Trace = 1
#Tracefile =/data/oracle/OracleBIData/odbctrace.txt
#Username = oracle
#Password = ''
[AnalyticsWeb]
Driver=/app/oracle/product/10.1.3/OracleBI/server/Bin/libnqsodbc.so
Description=Oracle BI Server
ServerMachine=local
Repository=
Catalog=
UID=
PWD=
Port=9703
The csv files I want to use are in the directory /data/oracle/OracleBIData/idc to which I have set up a working and checked connection ([idcbicsvfiles]) on the linux machine itself.
The error message I get when I select view data in the physcial layer is:
[NQODBC][SQL_STATE: HY000][nQSError: 10058] A general error has occurred.
[nQSError: 43093] An error occurred while processing the EXECUTE PHYSICAL statement.
[nQSError: 16023] The ODBC function has returned ans error. The database may not be available, or the network may be down.
Please can anybody give me a clue on how to get this working e.g. a working odbc.ini file from your own installation (and/or a tip for the odbc driver choice/configuration)
P.S. I know this is not supported by Oracle but can not imagine, that nobody is using this.

Hi,
Chekc this...Re: Is there ODBC driver for excel flat file in Unix Box
Re: OBIEE to use a CSV file as a data source on Linux
Regards,
Srikanth
Edited by: Srikanth Mandadi on Oct 8, 2010 2:50 AM

How to share internet access from iPhone with home LAN

Hello,
Sorry if this has been asked before, but I just bought an iPhone and am trying to use it to provide internet access to a LAN at my cottage where only dial-up is possible with my ISP. Although this is easily accomplished by enabling internet sharing on my iMac and plugging it into my router's WAN port, I do not have any access to my IP printer or to my SONOS music system. Any pointers?
Thanks,
Martin Girard

Well, getting internet access for my iMac is straightforward using USB tethering (I live in Canada, no AT&T crap). Then, I can share this connection with other computers (via ethernet in my case) by enabling internet sharing (in the Sharing control panel). My problem is that once I plug my iMac in the WAN port of my router, I can't access my LAN anymore. Any ideas???

[ACS 5.4] Logs access from secondary server

Hi,
I have 2 ACS 5.4 in distributed environment. Everything left to defaults besides policy.
Let assume ACS-A is the primary and ACS-B is the secondary. Regularly, I'd connect to ACS-A to make changes and WATCH LOGs.
Now, let assume ACS-A is down. Obviously, I connect to ACS-B and everything works fine, besides logs. When I click on 'logs center', a blank window opens and nothing happens.
But the URL it tries to open, it's ACS-A.
Now, from what I saw, ACS-A being the primary box is the log collector for a distributed environment, by default. But how I supposed to watch the logs on a secondary server when primary is down?
Thank you.

Hello Alex,
The following are the supported browsers and it should work fine in all fo them. Please have a look at them:-
Supported Web Client and Browsers
You can access the ACS 5.4 administrative user interface using the following web clients and browsers:
•MAC Platform
–Mozilla Firefox version 3.x
–Mozilla Firefox version 10.x
•Windows 7 32-bit
•Windows 7 64-bit
•Windows XP Professional (Service Pack 2 and 3)
–Internet Explorer version 7.x
–Internet Explorer version 8.x
–Internet Explorer version 9.x
–Mozilla Firefox version 3.x
–Mozilla Firefox version 8.x
–Mozilla Firefox version 9.x
–Mozilla Firefox version 10.x
The above mentioned browsers are supported only with one of the following cipher suits:
–-TLS_RSA_WITH_AES_256_CBC_SHA
–-TLS_RSA_WITH_AES_128_CBC_SHA
–-RSA_WITH_3DES_EDE_CBC_SHA

Data access from Application Server - Seeking Opinion

I am working on a fairly large scale ERP application that is written in Java both on the front end, and middle tier ( using a JBoss application server ).
All of the database access happens in my app server, and when I wanted to get peoples opinions on the best way to extract and pass data to and from the database from the app server, and of course to and from the client.
I am using JDBC to make database calls and extra data from the database. This is of course pretty trivial. And I first started writing POJO that represent tables in my database. I then wrote a faily length method that uses reflection to call the setting methods and pass in the objects returned from the database result set. This of course becomes tricky when you start to join multiple tables together. And often you only need a small subset of columns in a table and don't require an object with all the columns from the table ( some set, and some as null objects ).
So then I decided I was use a combination of ArrayList objects and HashMap's to store the data. If a result set returned multiple rows, it would return an ArrayList of HashMap objects. Each hash map would contain the data for that row, and the hash map keys are the column names.
This seems to work pretty well and resolves the problem of joining multiple tables together and keeping track of which columns get stored in which objects.
Does anyone have a different solution or idea as to how to handle this? And thoughts or ideas would be greatly appreciated.

bryano wrote:
Let me pose a quick Hibernate question as well.Let me recommend that you not be so thin-skinned about responses.
>
If you had a table that had 40 columns in it and say 1000 rows. And you needed to run a query that returned all 1000 rows, but you only needed two out of the
40 columns. Would it be better to extract those two columns into the HashMap / ArrayList collection I mentioned in my original post? Or would using something like Hibernate and a class that mapped all of the columns in the table be okay?Why not just map the columns you needed in Hibernate? Who said you had to map all 40 and have them be null?
My concern is on efficiency,
and I was wondering if building 1000 objects that each have 40 members that only 2 are populated is the most efficient way of extracting the data.Doesn't sound very efficient.
I will admit, my knowledge of Hibernate is limited at best so I may be missing a component of Hibernate that would allow you to only extract the columns you required, but you are still working with an object that has 38 null value objects for the columns you didn't require.I don't believe you're required to map every column in a table.
%

How do I allow for outside Internet access to my server?

I'm using Server on Mountain Lion and have set up my services and users. DNS is enabled and websites is enabled.
I'm having a problem connecting to my server outside my local network, but any device inside of my network connect to my Server configured site. Is there something blocking an outside computer from accessing my site or is it a Domain hoster problem?
Thanks for any help!

I don't think we have enough information to go on here. What happens when you try to access the website from outside your network? Are you using a DNS record or IP address? Are you able to ping the DNS/IP address?
@UptimeJeff Many residential ISPs (in the US) are becoming more lax when it comes to providing services from home, however they will not provide support if you have trouble, so that's something to keep in mind. I can speak from personal experience with Comcast and Suddenlink, but have heard the same from AT&T customers.

How to configure Redundant Internet Access on WIndows Server 2008 R2

I have a Windows Server 2008 R2 machine running in my basement. I have an application installed on it that calls a web service out on the open internet on a periodic timer. Everything works great until my ISP goes done.
For redundancy I got a second connection into my basement from a different ISP. I want to now configure my service to use the first ISP until it goes down and then automatically switch to the second ISP.
I have installed a second NIC card into the server. However, I need some help in configuring the redundant set up I am after.
For example it isn't clear to me if these separate NICs should be configured on the same subnet?
The other complication is that this server is infact the DC for my domain. Not sure if that complicates things or not.
I do RDP into the server remotely currently, so there is another potential complication (would need to enable that through both ISP router/nic. However, please note that other than the inbound RDP traffic, I am only interested in having the "outbound"
web service traffic redundant at this time - that is I am only using the machine as a client in this scenario).
I have read up on Multi-homing and just feel this is overkill for what I am trying to accomplish. All I want is for the internet to still be reachable from the machine via automatic switch over if my primary ISP goes down.
Thanks in advance for any and all help in configuring this correctly.
Rod

Hi Rob,
Thanks for posting here .
TMG could help to implement internet redundancy feature with using maximum two ISP connections:
Planning for Internet service provider high availability
http://technet.microsoft.com/en-us/library/dd897038.aspx
We can get more detail introductions form TMG/ISA forum If are interesting in this feature.
http://social.technet.microsoft.com/Forums/en-US/Forefrontedgegeneral/threads
Deploying other dedicate third party devices that support this feature is also a good choice .
Regards,
Tiger Li
TechNet Subscriber Support in forum
If you have any feedback on our support, please contact
[email protected]
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

File Access from DB Server/Unix Mounting

We have an Oracle Database that runs on Unix Box and a cold fusion application/web server runs on a Windows box. We have a data intensive stored procedure that gets data from DB, does lot of massaging and then create bunch of html files with sorting capabilities etc. This process happens upon user request from website (cold fusion/html page calling Oracle stored procedure). After this, the cold fusion server need to get access to these html files to display to the user.
Our Unix DBA's does NOT want to do File Mounting as they think the windows box is not secure. Hence we are exploring other options.
Below are the options we are exploring. But very well open to suggestions...
1. Let cold fusion query the data from Database and let it do the data manipulation/massaging
2. We explored the external tables (based on file) but the files are dynamic and could not find a way to do this
3. FTP transfer from Unix to NT box but there could be time delay and may not be available for immediate display
4. Create a temporary table, let the DB procedure insert data into table. Then Cold fusion will query from there.
Any other suggestions?

Hi,
Its not required to handle for #
just read the dataset into the string and split the string into work area fields seoparated by TAb delimiter.
Eg:
READ DATASET <filename> INTO l_string.
SPLIT l_string
               AT cl_abap_char_utilities=>horizontal_tab "Horizontal tab
              INTO l_funcloc_clas-tplnr
                   w_funcloc_clas-class
                   w_funcloc_clas-klart
                   w_funcloc_clas-atnam
                   w_funcloc_clas-atwrt
                   w_funcloc_clas-atfor.
append w_funcloc_clas to l_funcloc_clas.
With Regards,
Dwarakanath.S

Running 9i Dev Suite from Solaris server ?

HELP!! Trying to start up the 9i Developers Suite so that I can begin creating Forms and Reports. 9i Enterprise Edition is running on a Unix server. I had the 9i Developers Suite also installed on same server into a new folder OraHome/oracle2. I'm using TedExtend, an Xterm window to access files/folders from a Windows 2000 wrkstn and located the two files: OraHome/bin/f90desm and OraHome/bin/rwbuilder. But I can't get either one of these to run, getting error:
fatal: libjvm.so: open failed: No such file or directory
Killed
Am I missing a step that must be performed prior to running these two, or what?

Bill,
I did a search on Metalink and found a LOT of notes on those two error messages. Seems to be something amiss with your environment. Here are some of the articles to check:
Note.24014.1 :FRM 91111 Internal Error window system startup failure.
Note.1075912.6 : Frm-91111 Internal Error - Window System Start Failure
Note.1042246.6 :FRM-91116 and FRM-10039 INTERNAL ORACLE IMAGE STARTUP FAILURE
Note:1012456.6 : HOW TO CHECK X WINDOWS CONFIGURATION

Internet access from Solaris 10 server

Similar Messages

Maybe you are looking for