Internet required in order to record - privacy iss...
While my girlfriend is watching something online or playing her online games..I have noticed that I am unable to record any programs and instead get an error message. As soon as she stops using the internet I can record just fine...she starts using it again and I cant record.
I thought this was very odd so I did a little test and switched off my internet completely and again I was unable to record anything..so I switched my internet back on again and I WAS able to record.
There is also a noticeable delay from when I press the record button to when I see the recording confirmation message so because the internet is required and because of this confirmation delay it leads me to believe that my box is sending some information through my internet connection to BT of the programs I am recording.
Is this true??..if it is true then why does BT need to know what I am recording and how do I opt out of the spyware???
If its not sending any information then why do i need to be connected to the internet in order to record anything..the programs are coming through my ariel and recorded directly to my box so at no point is the internet required so why???
maxrpg wrote:
No I never disconnect my vbox or anything. I seems that when theres lots of internet activity like watching streaming videos online and/or playing MMO games it will not allow recordings but it works fine when activity is low. I always thought vision and standard BB were seperate and that they didnt impact on eachother?
Yes but why do my recording schedules need to be stored on BT servers and what does BT do with this information. surely the box can store my schedule.
It just seems odd to me and I cant think of any reason why it needs to be stored on a server instead of my box :\
For the functionality we have now, and for the last 4 years, there is very little point in having this record of the recordings (past and present - you won't be able to delete things either) on their servers. There is some useful functionality that would benefit from it - the most obvious being multi-room, another being remote access (say from your phone) to modify your scheduled recordings. But as we don't have these features there's only one time when this comes in useful - when you do a factory reset which deletes everything on your box. Not being able to make or delete recordings without access to the Vision servers is, at present, a royal pain in the bottom.
I've never heard of internet usage contention causing the vbox to have no access to the servers. Possibly your hub is faulty. Try rebooting it, or better giving it 15 minutes powered off, or best yet doing a factory reset of the home hub and see if that makes a difference.
Similar Messages
-
Please enter required information - Order Type
Hi,
In istore while clicking on the 'Place order' button i get the following error.
Error messages from Order Management
Please enter required information - Order Type
There is an error in order submission.
1.I haven't set the ASO Default Order Type at application(istore) and responsibility level(ibe_customer).
2.ASO: OM Defaulting is set to Yes at site,istore and IBE_CUSTOMER responsibilities. But in Default Sourcing Rules,there is no record for default order type.
If i set the profile option or create a record in with a default order type, I won't be able to change the order type in order management(because of the procesing constraints), once it is placed in istore.
The requirement is to default the transaction type(order type) based on the ship to address selected.How can i achieve this?
Thanks,
NithyaHi,
Run concurrent program Import orders and completed normal, but i got error and able to see in corrections .. 'Please enter required information - Line Type'Review the following documents and see if it helps.
Note: 371877.1 - Order Import Failing With 'Please enter required information - Line Type.'
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=371877.1
Note: 788860.1 - Retrobilling Order Creation Process Errors Out 'Please enter required information - Line type'
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=788860.1
when i tried to enter Line Type .. Goods in the tab page and validate... it is not accepting errored out.What is the error?
Regards,
Hussein -
I have a MacBook Pro and I need to be able to access Internet Explorer in order to login to my remote work server (Microsoft server) and Online Business Banking system (Bank of America Cash Pro). How do I do it if Internet Explorer is not supported on Macs? Is there another option? Please help.
I also feel like such a moron as I am really new to Apple computers and don't even know what operating system I am using. The below is what I have. Sorry to all that are well beyond me in the Mac world. Have been a windows user for my whole life and haven't quite figured out where to find everything I need on my new laptop yet. Thanks!
With the following configuration:
PROCESSOR 065-0154 2.7GHz Dual-core Intel Core i7
MEMORY 065-0156 8GB 1333MHz DDR3 SDRAM - 2x4GB
HARD DRIVE 065-0159 750GB Serial ATA Drive @ 5400
OPTICAL DRIVE 065-0161 8x Double-Layer SuperDrive
DVI Adapter 065-0162 None
VGA Adapter 065-0164 None
REMOTE 065-0166 None
Apple Software - iWork 065-7672 No iWork preinstalled
Apple Software - Final Cut Exp 065-7682 Final Cut Express preinstalled
Apple Software - Aperture 065-0338 Aperture preinstalled
Apple Software - Logic Express 065-7675 No Logic Express Preinstalled
Apple Software - Filemaker 065-8307 No FileMaker Preinstalled
Apple Software - MS Office 065-0278 MSO-HOME & BUSINESS EDITION
KEYBOARD AND DOCUMENTATION 065-0172 Keyboard/Users Guide
COUNTRY KIT 065-0175 Country KitIf you are New to Mac... you may also find these links of Value
Mac 101
http://www.apple.com/support/mac101/
http://www.apple.com/support/switch101/ Switching from PC
MBP Support
http://www.apple.com/support/macbookpro
Cheers, -
My 13 inch Macbook pro w retina will not install/download OS X Mavericks because it says I do not have the requirements in order to install it. I purchased my Mac this past month on 11/20/13 so i do not have a problem with it being an older version. Please help. This is my first computer so i dont have any experience on how to fix this.
You can't install the App Store version of Mavericks because your model needs a special version. If you ever need to reinstall it, boot into Recovery.
-
What do I need in order to hook up a turntable directly to the iPhone 5s in order to record vinyl records?
A preamplifier with an RIAA equalised input for a turntable, preferably a USB one,
-
Retrieve the Purchase Order Condition Records Table
Hallo!
I have found this code right here:
http://www.sap-basis-abap.com/sapab025.htm
It is very useful particular for purposes which I need. Please can somebody
try to fix the error to get it working. There is an internal table missing.
Regards
Ilhan
Retrieve the Purchase Order Condition Records Table
select * from ekko.
select * from konv where knumv = ekko-knumv
"Get all the condition records for the purchase order
endselect.
endselect.
* Get the info record conditions record
* First declare the record structure for the key
data: begin of int_konp,
txt1(5),
lifnr(5),
matnr(18),
txt2(4),
txt3(1),
end of int_konp.
clear: konh, konp, int_konp.
* data for the record key konh-vakey
int_konp-txt1 = '00000'.
int_konp-lifnr = ekko-lifnr+5(5).
int_konp-matnr = ekpo-matnr(18).
int_konp-txt2 = 'ALL'.
int_konp-werks = ekpo-werks.
int_konp-txt3 = '0'.
select * from konh where kschl = 'PB00' "Conditions (Header)
and datab => p_datum. "valid from date
if konh-vakey = int_konp. "Conditions (Item)
select single * from konp where knumh = konh-knumh.
continue.
endif.
endselect.Hi flora
Just get through the sequence .
see the table fields ...
1. From EKKO table take an entry which is having pricing conditions.
Now in the fields list check out for field EKKO-KNUMV(document condition number).
2.Take this condition number and now goto table KONV.
Give the document condition number in the field KONV-KNUMV and execute .
This will lead to a list of document condition numbers and some other fields .
3.Now check for field KONV-KNUMH ,KONV-KAWRT(quantity) and note the value KONV-KWERT .
(Remember this is at header level).
This is ur condition record number.
**comments
Now from document condition number we got the condition record number (KNUMH).
4. now since u want the item level tax procedure go to table KONP and give the condition record number and execute .
This will give u a list of details .
Now concentrate on KONV-KAWRT (scale quantity) KONP-KBETR(rate) as this table will store Pricing per UNIT so product of these two will give u the total pricing tax, for a particular condition type say PR00 .
For that particular condition item .
Check the pricing procedure .
See t-code VK13 and check the pricing procedure .
From me23 check the same PO num select the item and check the pricing conditions applicable .
Select a particular pricing and goto condition->analysis->analysis pricing ,
Better take help of a SD functional consultant in the process.
regards,
vijay. -
Regarding Purchase order info records
Hi,
How do I read the text maintained against purchase order info records, transaction ME12. What is the key that I should use for reading the text maintained.
Regards,
Vijayit may differ from system to system, so i will tell you how i determined this, rather than what i determined.
In your development or test system, make a change to the text.
now, use SE16 and look at table STXH. Put todays date in the TDLDATE selection (and your id for TDLUSER, if you want)
You should see the changes you made, and the keys associated with the texts. you can then use the FM READ_TEXT to get the text...
Hope this helps -
IPad Mini keep prompting activation required in order to use.
iPad Mini keep prompting activation required in order to use, and occasionally will be activation failed. The problem is known after upgrading to iOS8.1. Previously, When I was using iOS7.1 It doesn't prompt for activation.
To add on, I brought over from a guy.
-
Order of records in o/p of select statement
Hi all
I have doubt regarding the select statement. I need to execute a select statement (with out any order ie with out "order by") which searchs a table. I want to know whether in any
circumstances the order of the records of the select statement is different.
sample select statement which I need to execute
select emp_no from emplyees where designation = 'programer'
in one word order of records of in the o/p of a select statement will be unique ?
(provided same query same, table,)
can u plz quote the link to get more information
regards
RenjithHi,
YES, you can
Do Order By Without Using Order By Clause
in your select statement.
I assume that you have unique data ( e.g. emp_no in Emp Table ) and you you do not want to use Order by clause.
Solution 1:
Select Emp_no
from Emp
group by Emp_no;
the o/p will be in the sorted in the Ascending order.
Solution 2: ( Only for columns holding Numeric Values )
Select Emp_No
From Emp
Where 99999 - Emp_no in ( Select 99999 - Emp_no from Emp );
Again this will sort the result will be in the Descending Order. you can use any big number instead of 99999 but it should be greater than Emp_no value.
Note: You Should only use this method on not very large tables coz of performance issue.
Hope this will solve your problem.
Any Comment on this, any body.
Thanks and Regards
There is always a solution to the problem, And if there is no solution of a problem then problem is not a problem. -
How many revolution​s of data are required for order analysis?
Hello,
I have a requirement to collect, process, and save data for several hours at a user specified sampling interval. I suspect that I will need to use the speed of the motor to determine how many revolutions of data I am collecting.
Is there a minimum number of revolutions of data required for order analysis?
Thanks,
ChrisHI Chris,
Thank you for posting on the National Instruments forum. To determine how many revolutions of data that you are collecting, you will need to use the tachometer signal that is coming off of your motor and is defined as pulses per revolutions. With this, the absolute minimum that you need is two pulses to figure out how fast your motor is spinning. With only two pulses, however, it will be very hard to determine the order information.
I think this KB will help you in figuring out what Window Length you need when doing order analysis.
How to Select the Window Length When Extracting Orders with Order Analysis
Please let me know if the knowledge base article does not contain the information that you are looking for.
Thank You,
Nick F.
Applications Engineer -
Which app i need to load in order to record an iphone call from my iphone
Hello! Which app i need to load in order to record an iphone call from my iphone
Just make sure it is legal for you to do so first...
http://reviews.cnet.co.uk/mobile-phones/how-to-record-calls-on-an-iphone-for-fre e-50005584/
tt2 -
Ordering of records after export
I have a peculiar probelm, the order of records changes when exporting data (by dump) from one machine to another. Both are different type of laptop m/c. Both uses personal Oracle. Presently we are not able to simulate the same problem because of the lack of setup.
Hi Katie,
Click on "Library" and then you should see some columns on the top of the window, just like "Name", "Album", "Time", "Genre"... Just click one time over the "Album" column and all your songs will change to the correct order...
Hope it helps. -
ASCp - Planner Workbench, PO in receicing order type record
Dear Friends,
In ASCP, Planner Workbench ,under a plan, supply and ddemand screen has an order type "PO in receicving" with firm flag enabled with future date for due dates
We could see all the PO's for that item is closed. On hand Quantities also got increased based on that PO receipts.
Can you please let me know, what does that mean by "PO in receicving" order type record and how for a closed PO's it is being shown?
Thanks,
GaneshHi Ganesh,
The closed PO's should not be there and shouldn't have PO in Receiving status either.
But the reason why you must be seeing this is because there is still a record in MTL_SUPPLY for this PO with supply type code as RECEIVING and hence its still
appearing in ASCP.
Please go by the below article if the supply is still shown in RECEIVING but PO's are completed and run the mentioned queries to diagnose and get the inventory transaction fixed.
Fully Received / Delivered / Finally Closed Po Line Still Appearing in Item Supply / Demand Form MS and RS (Doc ID 1364291.1)
Moreover, if you started seeing this issue more often then the best way is to put the piece of code in the collections hook i.e MSC_CL_CLEANSE API to purge the supplies from ODS if PO's are closed for those.
Thanks,
Abhishek Sharma
Please mark the post correct or helpful, if answered -
Recently, when opening some websites, I can't view the page and now must open them with google chrome or internet explorer in order to view them
Hi headshot, <br /> Sorry you are having problems.
Are you seeing any error message or notification ? <br />If so what ?
If the page fails to load try clearing Reloading with the Ctrl F5 shortcut to force loading without the old new cached files. If that does not help try cache and clearing cookies for that site.
* Also see [[Websites don't load - troubleshoot and fix error messages]]
* [[Delete cookies to remove the information websites have stored on your computer#w_delete-cookies-for-a-single-site]]_delete-cookies-for-a-single-site
Reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with a left click.
OR
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
Let us know if this solves the issues you are having.
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article. -
What additional software is required in order to use adobe sdk?
what additional software is required in order to use adobe sdk?
thanks,
ChubDefinately you need development environment
More details you can find in Acrobar SDK documentation
http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/Overview_GettingStarted.3.6. html
Regards
Bartek
Maybe you are looking for
-
I got an error from an update and now my iphone 4 doesn't show up on itunes as a device. Does anyone know how to fix this? I have the most recent version of itunes downloaded.
-
Why can't update to the new iMovie and iPhoto?
I recently had to get a new hard drive in my MacBook Pro. After I installed Mavericks, I got a notification from the App Store saying there are two updates for iMovie and iPhoto. When I try to update them, I receive a message saying update unavailabl
-
Elements 12 Organizer unable to preview .mts video files
I am using Adobe Photoshop Elements 12 and Premiere Elements 12 on Windows 8.1. I have the newest version of Apple QuickTime (7.7.6) installed. I import .mts video files from my Panasonic Lumix DMC-GF1 for organizing along my still photos. I am absol
-
A possible solution to WiFi Sync Issue
I started with this link: http://www.imore.com/itunes-wifi-sync-not-working-ios-8-heres-how-fix-it Now here is what I did: Reset the network settings: Settings--> General --> Reset --> Reset Network Settings After it finished resetting, I re-joined m
-
Hello, I am working with the Demo version of CodeWarrior V8.0. I am triyng to compile the program okDemo ( from the palm sdk ) but I get a lot of error messages. I saw that the sample code included in Oracle 8i Lite is for Codewarrior 4 and 5. Wath c