Intersection Validation with Multiload files

Hi,
is it possible to run intersection validation rep with Multiload files?
if not, any workaround? maybe scripting the process?
Thanks

The adaptor is specifically coded to not run the intersection validation report on multiload. You could attempt to modify the adaptor but I would caution you that if you make a modification that causes the application to not function properly, support will require you to import a clean/unedited adaptor.

Similar Messages

Validation with data file failed

Hello All
I have loaded the Currency Exchange Rates from BW cube into Rate Model in BPC upto March 2014 and then our BW cube get updated the Exchange Rates for April 2014.
Now I am trying to load the Exchange Rates for April 2014 only into Rate model and for that I am validating the Transformation File but it was failed. It shows 'VALIDATION WITH DATA FILE FAILED'.
Rejected list option showing blank screen.
With the same Transformation file I have loaded the data upto March 2014 successfully.
I have compressed the source cube, reactivate the source cube after all am unable to validate the Transformation file. Below is my transformation file screen shot.
Please let me know if you need any more details from my side.
Thanku you all in advance.
Please help
Regards
Srikant

Hi Shaik
Thanks for your reply.
I have validate the Transformaiton file by given vlaue in MAXREJECTCOUNT= 10000 but there is no chage same error is coming. 'Validation with data file failed' without any errors.
Thanks
Srikant

How to do file validation with ODI 10.1.3.5

Hi Team,
Please help me, how to handle file validation with ODI?
My source is files.
Requirement:
With ODI i have to do the file validation and file data loading successfully. Once it is successfully done then i have to move the particular file and move to different directory.
Any internal tool is there in ODI package to watch the file.
Regards,
Suresh

Hi Suresh,
You can do your file loading and validation in an ODI interface.
Once you are done with the interface, add it to a package, you can set up subsequent steps in the package to move the file to another location using the built in ODI file utilities in the package.
Terrence.

XML Validation with multiple XSD files (referenced)

Hello,
I know that XML validation with version 7.1 is possible now. However I was provided with a set of XSD files that have references to each other and need to be placed in a hierachical file system order so that references can be resolved.
An element <xsl:include schemaLocation="../../baseSchemas/baseSchema.xsd" /> is used for example. How can I handle that for XSD validation in PI? Can I create the same folder structure or do I need to put all XSD files in one directory and change the import manually?
But most important question: Is it possible it all to use more than one XSD for schema validation?

Dear Florian,
I had encountered such case in a project.
I was given 3 files. One main file and 2 others called Schema1.xsd and Schema2.xsd.
This happens because your data type is not in single namespace, but is being referred across namespaces and software components.
I am assuming that you have read the How to Guide for XML validations on PI 7.1
Best way to do this quickly is as follows.
1. Enable XML validation at adapter engine in the sender agreement.
2. Post a message using HTTP post. (http://sappihttpclient.codeplex.com)
3. Check communication channel in runtime workbench. There will be an error saying which is missing at what path.
4. Create the path mentioned and place the file at that path.
5. Repeat steps 2,3,4 for all the files.
When you are done with this, you will get a proper validation error in case XML file is not correct. And remember to generate XSD from message type and not data type.
Regards,
Vikas
Edited by: Vikas Aggarwal on Sep 2, 2009 8:45 PM
Edited by: Vikas Aggarwal on Sep 2, 2009 8:48 PM

Intersection Validation Report error

After clicking the Validate step to get the intersection validation report (Enable Intersection Validation) is turned on, I get the following error in a new window
"The XML page cannot be displayed Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later."
Any help would be appreciated

You can't open the XML directly from the outbox. The user ID that you are accessing the file with will likeyl not have access to the directory where the XSL file is stored. The XSL file is used to translate the XML file into a viewable format.
You can copy the XSL file into a directory where you do have access and modify the XML to look to that directory.
BTW, please open new threads for your questions.
Edited by: TonyScalese on Apr 14, 2011 1:35 PM

XML validation in sender file adapter

Hi
I am using FCC on the sender file adapter ....i need to make sure that one of the fields should always be integer else the sender adapter should give error
Can i use xml validation with FCC on the sender file adapter?

Hi Hema,
As per understanding you need to check one or few fields value is integer or not.
You can achieve in 2 ways :
Case1:Using inbuilt xml validation options.
For 7.11 and below
1)In ESR/Message type/Export the xsd to local machine.
2)Insert the xsd file in the below loc
/usr/sap/<sid>/DVEBMGS00/j2ee/cluster/server0/validation/schema/
<guid>/<namespace1>/<service_interface_name>/<namespace2>
<sid>: System ID of the server instance.
<guid>: The GUID of the SWCV.
<namespace1> : The namespace within which the service interface is defined.
<service_interface_name> : The name of the service interface.
<namespace2>
: The namespace of the Message Type used by the service interface. In many
instances, namespace1 and namespace2 are the same.
Italic path folders need to create by you.
For 7.3 and above
Michal's PI tips: XML validation - changes in 7.3
Case 2 :Handling using simple UDF.
Input-->UDF-->Output
try {
   Integer.parseInt(input);
   return input ;
catch(NumberFormatException e) {
throw new StreamTransformationException( "Input field value for xyz field "+input+"is not in integer format.Plz correct it");
Regards
Venkat

XML validation with DTD in java 1.5 not supporting

Hi,
I am facing a problem regarding validation of xml file with DTD tag in it.
I have disabled the parser through setValidating(false) method.
xml file is not parsed in JRE 1.5.but it is parsed in JRE 1.6.
Why this is showing such a behavior?
I have used xerces 2.9.0,xml-api.jar and other jar regarding XML api but still it is giving error.
please help me.
please provide a jar file name or its issue resolution in jre 1.5 or 1.4.

thanks for your prompt reply.
I required that it should be completely disabled in jre 1.5(jdk1.5 or 1.4).
I am using DOM Parsing.I have currently disabled with follwowing method,
builderFactory.setValidating(false);
builderFactory.setFeature("http://xml.org/sax/features/validation",
     false);
     builderFactory.setFeature("http://apache.org/xml/features/nonvalidating/load-dtd-grammar", false);
     builderFactory.setFeature("http://apache.org/xml/features/nonvalidating/load-external-dtd",false);
     builderFactory.setFeature("http://xml.org/sax/features/external-general-entities", false);
     builderFactory.setFeature("http://xml.org/sax/features/external-parameter-entities", false);
     factory.setFeature("http://apache.org/xml/features/nonvalidating/load-external-dtd", false);
in 1.6 it is working fine but I required that i have to disabled it.but it is giving a error in jre1.5.
Exception in thread "main" java.lang.AbstractMethodError: javax.xml.parsers.DocumentBuilderFactory.setFeature(Ljava/lang/String;Z)V
I just want to disable the parsing in jdk version 1.5 or 1.4
thanks in advance
anand

The File name property is not valid. The file name is a device or contains invalid characters

I have an SSIS task that has run successfully for years. They just moved the dtsx to a new server and now it is failing.
Issue:
The task has a data flow that writes a raw file destination. It then has a subsequent data flow that reads the raw file destination.
The path and name of the raw file is passed to each of the data flows via the same variable.
The raw file resides in a folder on the server in the same path that the dtsx resides in.
The task fails with the "The File name property is not valid. The file name is a device or contains invalid characters" error when trying to access the raw file.
What we have done to troubleshoot:
1. I ran the task successfully on my local machine so it is definitely a server issue.
2. The first thing we were seeing was that it failed trying to write to the raw file. The task is set to "Create Always".
3. We saw that the dba's copied over the entire directory structure from the old server which included a previously created raw file, so we deleted the raw file.
4. We reran the task and it successfully wrote a new raw file but then failed on reading the raw file with the same error as above.
5. We reran the task AGAIN and this time it failed trying to write the raw file throwing the same error as above.
6. The dba looked at the directory and the account that performs the task has full control.
7. The dba looked at the raw file that was created and verified that the account that performs the task has full control of the file and that it is the owner of the file.
Summary:
The task fails when trying to access the file EXCEPT when the file does not exist. In that situation it can write the file but subsequently fails in accessing it again.

Hi Whalensdad,
Based on my research, the issue can be caused by the following reasons:
There are some invalid characters in the File name at package runtime. In this scenario, just as Russ said, could you please post the value that is in the File name variable? Also use a Script Task with Messagebox.show to show the variable values at runtime.
May be it changes to others at run time.
The account runs the package not having access to all the folders in the path. Since you are moving the dtsx file from one server to the current server, do you also move the raw file to the same folder in the current server? Does the user runs the package
have access to all the folders in the path? To solve this, please ensure that the user has access to all folders and the raw file in the path on the current server.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support
Please see the response above. I can't use a message box on a server so I logged the values to the database. The resource account has full control to the folder. I haven't been able to get the DBA to check the SQL Agents permissions, but I was always under
the impression that if you use "Run As" on the task, it will not use the SQL Agent but the account you identify it to "Run As". The "Run As" account has full control on the folder and file.

Very slow responce when working with Office file on DFS-Share

Very slow responce when working with Office file on DFS-Share
We have implemented the following configuration
Domain level Windows 2000. Two member servers with Windows Server 2008 R2, sharing the same DFS namespace with, at the moment, one folder target called Home.
Users complaining that the access to different MS Office files is very slow. Even creating a new MS Word document using right click context menu takes up to 4 minutes to open. Saving, for example, one singe Excel sheet takes also few minutes.
Tested with both, MS Office 2007 and MS Office 2010. Makes no difference. When using Office 2010 you can see the message like contacting:
\\DomainName\Root\Home\UserName. Other files like TXT, JPG or PDF are not affected.
What makes the thing really weird is the fact, that the behavior described above can absolutely change after client machine being rebooted, suddenly everything becomes very fast and this condition can revert back again just after the next
reboot.
Considerations until now:
1. This has nothing to do with the file size. Even tiny files are affected.
2. AD Sites are configured correctly and the client workstations see themselves in the correct sites.
3. This is not an Office issue. If I map my folder target not as DFS, but directly as shared network drive
\\ServerName\Root\Home\UserName , everything functions as expected
What makes me suspicious: when using f.e. TCPView to monitor connections, I can see, that each time I make any operation on an office file, there will be a connection established to one of the domain controllers, sometimes to remote ones,
located in other countries. But on the other side, even if the connection is established to the nearest DC, operations are still very very slow!
Just forget to say. All clients are Windows 7
Thanks to all who respond.

Dear all,
sorry for the delayed reply. The problem has been solved now and since September 19<sup>th</sup>. everything is functioning as expected.
What was done:
Deleted replication targets excepting the initial ones
Carefully recreated folder targets
Deleted and recreated replication groups
Disabled SNP features on both namespace servers
Created EnableTCPA registry entry
Checked that the following Updates are installed
http://support.microsoft.com/kb/2688074
http://support.microsoft.com/kb/2647452
Concering Office File validation KB2553065 - This Update was already declined on our WSUS server
Kind Regards
Eduard

Newbie help please: "Validation of XML file failed."

Hopefully my question is short and easy.
I'm a developer and haven't used FrameMaker before. However for unforeseen reasons, I've inherited our technical help documentation constructed in FrameMaker which I've never used. Unfortunately I'm under a very tight deadline and I'm attempting to update our already existing and fairly extensive application help files.
However, I'm getting a "Validation of XML file failed" error for 90% of our .xml help docs. I opened our .book file in FrameMaker fairly easily, and can see all of our .xml files. However the variables already embedded in the documents aren't being recognized and seem to be causing the above error. I've located our variable definition files (xml) in the concepts folder, but FrameMaker doesn't seem to recognize them. Any suggestions on what I can check or how I can get FM to refer to the variable definitions? I'm working with a new installation of FM, is there some setup I overlooked?
Many thanks,
dana.

Sheila and Rick,
Thank you both so much for your offer of help. My apologies for not replying earlier. Other 'emergencies' and priorities at work took me in other directions. It turns out another solution has been found for the time being. But thank you again for your replies. They say a lot about this community and its support. :)
Thanks again,
dana.

Setup.exe fails, folder " "does not contain a valid media info file 'mediainfo.xml'"

I'm trying to run the SQL Server R2 setup.exe, and all I get is a command window popping up briefly, then nothing.
This actually affects all SQL Installers that I have on my machine:
2008R2
2012
SSDT BI Pack for VS2012
If I run the setup.exe from the command line, I get this:
An error occurred during the SQL Server 2008 R2 Setup operation
Error result: -2067529698
Result facility code: 1220
Result error code: 30
For more information, review SQL Server R2 Setup Logs in your temp folder
The contents of that log file are:
04/04/2014 10:54:34.489 ======================================================================
04/04/2014 10:54:34.510 Setup launched
04/04/2014 10:54:34.541 Attempting to determine media source
04/04/2014 10:54:34.558 Media source value not specified on command line argument.
04/04/2014 10:54:34.574 Setup is launched from media directly so default the value to the current folder.
04/04/2014 10:54:34.591 Media source: C:\SQL Server Installers\2008 R2\
04/04/2014 10:54:34.608 Attempt to determine media layout based on file 'C:\SQL Server Installers\2008 R2\mediainfo.xml'.
04/04/2014 10:54:34.627 The folder 'C:\SQL Server Installers\2008 R2\' does not contain a valid media info file 'mediainfo.xml'.
04/04/2014 10:54:34.649 Setup closed with exit code: 0x84C4001E
04/04/2014 10:54:34.677 ======================================================================
I've checked 1000 times that the folder DOES contain a mediainfo.xml file:
<?xml version="1.0" encoding="UTF-8"?>
<MediaInfo>
<Properties>
<Property Id="MediaLayout" Value="Full" />
</Properties>
</MediaInfo>
I've seen a few suggestions elsewhere in search results, but nothing has worked so far.
I've previously run the 2008R2 installer and the 2012 installer without problems, so I'm not sure what has changed, or how to get round it.
I'm running on Windows 7 Enterprise SP1, 64 bit with up-to-date Windows Updates.
Any help would be very much appreciated.

In addition to Alberto’s suggestion:
Validate the setup media is not corrupt.
http://thesqldude.com/2012/01/27/sql-server-setup-how-to-validate-downloaded-imagemedia-before-installation
Install .net framework 3.5 and 4.0. Repair them, if already installed.
This posting is provided “AS IS” with no warranties, and confers no rights.
If this reply answers your question, please mark it as Answered for others to find it easily.
If this reply help you resolving the problem, please vote the post as Helpful.

Problem Validating & Processing Transformation file in NW 7.0 version

I am trying to Validate & Process Transformation File against my Data file I am getting the error message that I have at the below. When I validate the Conversion files, I see the creation of corresponding .CDM files. I even deleted the .CDM files and recreated the files.
So my question is why it is giving "Sheet does not exist (CONVERSION)" warning for which it is rejecting the records inside the Data File?
DATA FILE:
C_Category,Time,R_ACCT,R_Entity,InputCurrency,Amount
ACTUAL,2007.DEC,AVG,GLOBAL,USD,1
ACTUAL,2007.DEC,END,GLOBAL,USD,1
ACTUAL,2007.DEC,AVG,GLOBAL,JPY,110
ACTUAL,2007.DEC,END,GLOBAL,JPY,110
ACTUAL,2007.DEC,HIST,GLOBAL,JPY,110
ACTUAL,2007.DEC,HIST,GLOBAL,USD,1
ACTUAL,2008.MAR,AVG,GLOBAL,USD,1
ACTUAL,2008.MAR,END,GLOBAL,USD,1
ACTUAL,2008.MAR,AVG,GLOBAL,JPY,107.5
ACTUAL,2008.MAR,END,GLOBAL,JPY,105
ACTUAL,2008.MAR,HIST,GLOBAL,JPY,110
ACTUAL,2008.MAR,HIST,GLOBAL,USD,1
TRANSFORMATION FILE:
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=
SPECIFICMAPPING=YES
*MAPPING
C_Category=*col(1)
Time=*col(2)
R_ACCT =*col(3)
R_Entity=*col(4)
InputCurrency=*col(5)
Amount=*col(6)
*CONVERSION
C_Category=[COMPANY]C_Category.xls!CONVERSION
Time=[COMPANY]Time.xls!CONVERSION
R_ACCT=[COMPANY]R_ACCT.xls!CONVERSION
R_Entity=[COMPANY]R_Entity.xls!CONVERSION
InputCurrency=[COMPANY]InputCurrency.xls!CONVERSION
ERROR
[Start validating transformation file]
Validating transformation file format
Validating optionsu2026
Validation on options was successful
Validating mappingsu2026
Validation on mappings was successful
Validating conversionsu2026
Sheet does not exist (CONVERSION)
Sheet does not exist (CONVERSION)
Sheet does not exist (CONVERSION)
Sheet does not exist (CONVERSION)
Sheet does not exist (CONVERSION)
Validation on conversions was successful
Creating the transformation xml file; wait a moment
Transformation xml file saved successfully
Connecting to server...
Begin validate transformation file with data fileu2026
[Start test transformation file]
Validate has successfully completed
ValidateRecords = YES
Task name CONVERT:
No 1 Round:
Record count: 12
Accept count: 0
Reject count: 12
Skip count: 0
Error: All records are rejected

*CONVERSION
C_Category=C_Category.xls
Time=Time.xls
R_ACCT=R_ACCT.xls
R_Entity=R_Entity.xls
InputCurrency=InputCurrency.xls
On validating with the above format, I still getting the same error
[Start validating transformation file]
Validating transformation file format
Validating optionsu2026
Validation on options was successful
Validating mappingsu2026
Validation on mappings was successful
Validating conversionsu2026
Sheet does not exist (CONVERSION)
Sheet does not exist (CONVERSION)
Sheet does not exist (CONVERSION)
Sheet does not exist (CONVERSION)
Sheet does not exist (CONVERSION)
Validation on conversions was successful
Creating the transformation xml file; wait a moment
Transformation xml file saved successfully
Connecting to server...
Begin validate transformation file with data fileu2026
[Start test transformation file]
Validate has successfully completed
ValidateRecords = YES
Task name CONVERT:
No 1 Round:
Record count: 12
Accept count: 0
Reject count: 12
Skip count: 0
Error: All records are rejected

XML validation with JDOM / JAXP

Hello,
I am trying to validate xml file against schema file. I decided to use JDOM and JAXP.
First question: is it a good choice?
I did a first attempt but not sure I have understood all what I am doing :(
First I have create a parser usinf org.jdom.*
SAXBuilder parser = new SAXBuilderThen I built my document:
Document doc = parser.build(myFile)These 2 steps are ok. But it does not do validation.
I saw in the JDOM documentation that I can set a validation flag to true. I did it. First problem, I got the following error from JDOMException: Document is invalid: no grammar found.
Is there a way to specify to the parser where to find the xsd file?
As I did not find answer to this question by myself, I tried implementing the Schema class from JAXP:
SAXBuilder parser = new SAXBuilder;
Document doc = parser.build(myFile);
Schema schema = SchemaFactory.newInstance(XMLConstants.W3C_XML_SCHEMA_NS_URI).newSchema(schemaFile);
ValidatorHandler vh = schema.newValidatorHandler();
SAXOutputter so = new SAXOutputter(vh);
so.output(doc);It does the validation against the schema file specified but I am not really sure about what I am doing here. The last 2 commands are not clear to me :(
Then in my schema file, I have elements that have default value. I expected the following behavior: if the element is not in the xml file then the default will be used by the parser (and added in the tree). But it seems, it's not the case.
Any help/explanation will be really appreciated.

I am trying to validate xml file against schema file. I decided to use JDOM and JAXP.
First question: is it a good choice?
If only schema validation is required use the validation API in JDK 5.0.
http://www-128.ibm.com/developerworks/xml/library/x-javaxmlvalidapi.html
http://java.sun.com/developer/technicalArticles/xml/validationxpath/
For validation with JDOM, the following validation application explains the procedure:import org.jdom.input.SAXBuilder;
import org.xml.sax.SAXException;import org.jdom.*;
import java.io.*;
public class JDOMValidator{
public void validateSchema(String SchemaUrl, String XmlDocumentUrl){
           try{
SAXBuilder saxBuilder = new SAXBuilder("org.apache.xerces.parsers.SAXParser",true);<br/>saxBuilder.setValidation(true);
saxBuilder.setFeature("http://apache.org/xml/features/validation/schema",true);
saxBuilder.setFeature("http://apache.org/xml/features/validation/schema-full-checking",true);
saxBuilder.setProperty("http://apache.org/xml/properties/schema/external-noNamespaceSchemaLocation",SchemaUrl);
Validator handler=new Validator();
saxBuilder.setErrorHandler(handler);
saxBuilder.build(XmlDocumentUrl);
if(handler.validationError==true)
System.out.println("XML Document has Error:"+handler.validationError+""+
handler.saxParseException.getMessage());
else
      System.out.println("XML Document is valid");
          }catch(JDOMException jde){
            }catch(IOException ioe){
private class Validator extends DefaultHandler{
     public boolean validationError = false;
     public SAXParseException saxParseException=null;
public void error(SAXParseException exception) throws SAXException{
     validationError =true;
     saxParseException=exception;
public void fatalError(SAXParseException exception) throws SAXException {
validationError = true;
saxParseException=exception;
public void warning(SAXParseException exception) throws SAXException       {
public static void main(String[] argv)   {
   String SchemaUrl=argv[0];StringXmlDocumentUrl=argv[1];
   JDOMValidator validator=new JDOMValidator();
   validator.validateSchema(SchemaUrl,XmlDocumentUrl);
}

Firefox 29.0.1 cannot process a valid .json backup-file.

After upgrading to v29.0.1 my all my bookmarks have gone. I have tried restoring them from automated backups (I tried ten different files) but each time I got an error message saying that ff couldn't process the backup-file.
The files have been validated with json-formatter.
I am using a shared profile across ubuntu 12.04 and win7.

I thought not, but apparently Firefox didn't shut down properly because after a reboot and deleting places.sqlite prior to the first start of FF, everything returned back to normal.
Anyway, your answer made me check again and alas, I don't have to manually restore all my addons and respective settings after all.
Thanks a lot for your help the-edmeister and cor-el!

How to skip validation for tag file, or jsp fragment?

hi
I have some jsp fragment and tag file in a workshop 10 project
workshop blame me about the jsp fragment (no start/end tag)
and unable to publish to server
is there a way to skip validation on some files?
I do found an check box call "validate JSP fragments" and I have un-ticked it. It does nothing.
please help

Yes, you can turn off validation either on project/folder/individual file.
Project:
Project > Properties - Validation AppXRay - un-check "Validate Workshop managed documents" (this is not recommended, you may loose entire AppXRay validation).Folder:
Project > Properties - Validation AppXRay - Exclude Folders tab, if all the JSP fragments are present in a particular folder (under WebAppRoot), you can pick that folder to be excluded from AppXRay validationFile:
Help > Help Contents - BEA Workshop User's Guide > Common IDE Tasks > "Using AppXRay" - Live Synchronization of artifacts with AppXRay - On this page scroll to the bottom you will find a table with list of comments that can be included in a JSP file to exclude file level validation.Ex:
<%--<nitrox:set-property property="validation" value="true"/> --%>
Controls all validation in the IDE. The default value of true enables validation.

Intersection Validation with Multiload files

Similar Messages

Maybe you are looking for