Interview with Client

Hi All,
I am marketing myself. I want to know one thing. When we get an interview call for client. How we should proceed like I have put a project which contains responsibilities like created infoobj, infocube, involved in extration etc. So how to form it in an scenario and talk to client example like my current project i did this?
whatz the first phase when you start a project and tell the client?
If anybody can suggest, Plz let me know
Thanks
Gaurav

Hi Take one functional Module & some flat files where u r getting data ,U should very clear with all the processes connected with Extration,Modelling,reporting
ok
ifu have any doubts mail me
[email protected]
All the Best

Similar Messages

Autoscaling Application block for Azure worker role console app not working. Get error as The HTTP request was forbidden with client authentication

I have written a console application to test the WASABi(AutoScaling Application Block) for my worker role running in azure. The worker role processes the messages in the queue and I want to scale-up based on the queue length. I have configured and set the
constraints and reactive rules properly. I get the following error when I run this application.
[BEGIN DATA]{}
DateTime=2013-12-11T21:30:02.5731267Z
Autoscaling General Verbose: 1002 : Rule match.
[BEGIN DATA]{"EvaluationId":"4f9f7cb0-fc0d-4276-826f-b6a5f3ea6801","MatchingRules":[{"RuleName":"default","RuleDescription":"The default constraint rule","Targets":["AutoscalingWebRole","AutoscalingWorkerRole"]},{"RuleName":"ScaleUpOnHighWebRole","RuleDescription":"Scale
up the web role","Targets":[]},{"RuleName":"ScaleDownOnLowWebRole","RuleDescription":"Scale down the web role","Targets":[]},{"RuleName":"ScaleUpOnHighWorkerRole","RuleDescription":"Scale
up the worker role","Targets":[]},{"RuleName":"ScaleDownOnLowWorkerRole","RuleDescription":"Scale down the worker role","Targets":[]},{"RuleName":"ScaleUpOnQueueMessages","RuleDescription":"Scale
up the web role","Targets":[]},{"RuleName":"ScaleDownOnQueueMessages","RuleDescription":"Scale down the web role","Targets":[]}]}
DateTime=2013-12-11T21:31:03.7516260Z
Autoscaling General Warning: 1004 : Undefined target.
[BEGIN DATA]{"EvaluationId":"4f9f7cb0-fc0d-4276-826f-b6a5f3ea6801","TargetName":"AutoscalingWebRole"}
DateTime=2013-12-11T21:31:03.7516260Z
Autoscaling Updates Verbose: 3001 : The current deployment configuration for a hosted service is about to be checked to determine if a change is required (for role scaling or changes to settings).
[BEGIN DATA]{"EvaluationId":"4f9f7cb0-fc0d-4276-826f-b6a5f3ea6801","HostedServiceDetails":{"Subscription":"psicloud","HostedService":"rmsazure","DeploymentSlot":"Staging"},"ScaleRequests":{"AutoscalingWorkerRole":{"Min":1,"Max":2,"AbsoluteDelta":0,"RelativeDelta":0,"MatchingRules":"default"}},"SettingChangeRequests":{}}
DateTime=2013-12-11T21:31:03.7516260Z
Autoscaling Updates Error: 3010 : Microsoft.Practices.EnterpriseLibrary.WindowsAzure.Autoscaling.ServiceManagement.ServiceManagementClientException: The service configuration could not be retrieved from Windows Azure for hosted service with DNS prefix 'rmsazure'
in subscription id 'af1e96ad-43aa-4d05-b3f1-0c9d752e6cbb' and deployment slot 'Staging'. ---> System.ServiceModel.Security.MessageSecurityException: The HTTP request was forbidden with client authentication scheme 'Anonymous'. ---> System.Net.WebException:
The remote server returned an error: (403) Forbidden.
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.HttpChannelUtilities.ValidateAuthentication(HttpWebRequest request, HttpWebResponse response, WebException responseException, HttpChannelFactory`1 factory)
at System.ServiceModel.Channels.HttpChannelUtilities.ValidateRequestReplyResponse(HttpWebRequest request, HttpWebResponse response, HttpChannelFactory`1 factory, WebException responseException, ChannelBinding channelBinding)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
If anyone know why I am getting this anonymous access violation error. My webrole is secured site but worker role not.
I appreciate any help.
Thanks,
ravi

Hello,
>>: The service configuration could not be retrieved from Windows Azure for hosted service with DNS prefix 'rmsazure' in subscription id **************
Base on error message, I guess your azure service didn't get your certificate and other instances didn't have certificate to auto scale. Please check your upload the certificate on your portal management. Also, you could refer to same thread via link(
http://stackoverflow.com/questions/12843401/azure-autoscaling-block-cannot-find-certificate ).
Hope it helps.
Any question or result, please let me know.
Thanks
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Interview with David Vincenzetti, CEO of Hacking Team

Interview with Business InsiderNot as much in depth as I'd hoped it would be, but worth a look. I like how he skirts the question on if they disclose zero-day info to the vendors. "BI: As I understand it, finding hackable software flawsis core to your business, do you ever disclose any of the security vulnerabilities you find to vendors?DV: Zero day vulnerabilities are not core to Hacking Team’s business. The core is providing a system to law enforcement that allows surveillance in the digital space.Essential to that is a process of continuous updates to the software to assure that it can be operated securely. Zero day exploits are only one way in which clients may choose to deploy Hacking Team software."
This topic first appeared in the Spiceworks Community

SEOUL: Samsung Electronics is bringing forward the launch of a key premium smartphone model, a person familiar with the matter told Reuters, as the South Korean tech giant seeks to revive sales after a sluggish second quarter.The world's top smartphone maker will launch a new version of its Galaxy Note phablet in mid-August, the person said, declining to be identified due to the sensitivity of the matter. Previous versions, such as the Note 3 and 4, typically launched in September.A Samsung spokeswoman declined to comment.The mid-August launch will likely put the new Note smartphone model on the market ahead of arch-rival Apple's next iPhones. The US company is preparing for its largest initial production run for new phones so far by the end of the year, the Wall Street Journal reported earlier this week...Read More
Read More

Adobe Creative Cloud - How To Share Files With Clients and Colleagues | Creative Suite Podcast: Designers | Adobe TV

In this episode of the Adobe Creative Suite Podcast, Terry White shows how to share Photoshop, Illustrator and InDesign Files with clients and colleagues and all they'll need is a browser to comment and see your Photoshop Layers.
http://adobe.ly/10ZjpE4

Terry,
I guess I miss something. How can I share a folder of photos? When I return from a shoot, I select 20 of the pictures and need to share them with my client to pick up the favorites. Am I supposed to copy and past an URL for each image separately?
Sometimes I also work with a colleague, I need to share my favorites with him. Same issue.
We have tried Adobe Cloud, and then went for Dropbox. There we can share a folder and he can put even his pictures in it as well. That's what I call collaboration. And it is free (unlike Adobe Cloud). If you have some word in Adobe, please tell them to either drop it and make a deal with services like Dropbox, or make it properly.
Thanks.
Vaclav

SSL VPN with client, anyconnect.

I've set up a simple test on SSL VPN with client on a 3800.
It didnt work. I assume i have to turn on the IP http server so that the client can hit it.
but when I turned it on, the client goes to SDM, nothing with ssl vpn happened. it tells me the pay is not available.
The underlying routing is fine.
Could you tell me where it is configured wrong?
Config is copied below.
thanks,
Han
=======
Current configuration : 3340 bytes
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
boot-start-marker
boot-end-marker
enable password cisco
aaa new-model
aaa authentication login default local
aaa session-id common
no network-clock-participate slot 1
crypto pki trustpoint TP-self-signed-3551041125
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-3551041125
revocation-check none
rsakeypair TP-self-signed-3551041125
crypto pki certificate chain TP-self-signed-3551041125
certificate self-signed 01
3082024F 308201B8 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 33353531 30343131 3235301E 170D3131 31313135 31383238
30365A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D33 35353130
34313132 3530819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100CFCF CFFAD76A 50DA82C9 8D4E3F90 64AD24EB 5409C5E2 43BC64F3 07F6C0E0
29FF2D71 0DA0D897 2F814BD2 7F817503 429D4BC6 6AD6EEA4 DFA74BAD 0EAF84D5
6ED55EC0 6C637178 BEEBCD1D 184BB90C CA84E974 48003885 87B53F2E 36A04661
23DA2CBB DD8EEE1D 2F25AF9A E21DC288 BF76A17C C1F4BA07 95F09377 A12BE01A
53750203 010001A3 77307530 0F060355 1D130101 FF040530 030101FF 30220603
551D1104 1B301982 17526F75 7465722E 776E7362 6E6F632E 696E7465 726E616C
301F0603 551D2304 18301680 14BE9E8F ED788928 560D7CA1 EED89B0D DE34D772
5D301D06 03551D0E 04160414 BE9E8FED 78892856 0D7CA1EE D89B0DDE 34D7725D
300D0609 2A864886 F70D0101 04050003 818100BC 4A2A3C47 7BF809AF 78EE0FD9
73692913 F280765E BAFAECAB ED32C38D 3030810B C62C7F45 13C8A6EE AE96A891
CDD4C78B 803299AD EB098B27 383CEF6F 0E2B811F 3ECFADBA 07CD0AC6 BBB8C5FE
B2FC0FD8 562B7100 BB28036E 4575D1F5 B17687C6 8EACBD66 A9E52FEE A030E69A
CAAE9F1B 618FA59D 02C25BC8 77D6CAC2 C7E56F
quit
dot11 syslog
ip cef
multilink bundle-name authenticated
voice-card 0
no dspfarm
username cisco1 privilege 15 secret 5 $1$L2RA$Zqs6FLce5Ns5fny5aRL49/
archive
log config
hidekeys
interface GigabitEthernet0/0
ip address dhcp
duplex auto
speed auto
media-type rj45
end
interface Loopback1
ip address 1.1.1.1 255.255.255.0
interface GigabitEthernet0/0
ip address dhcp
duplex auto
speed auto
media-type rj45
ip local pool svc-poll 1.1.1.50 1.1.1.100
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 192.168.1.254
ip http server
no ip http secure-server
control-plane
line con 0
logging synchronous
line aux 0
line vty 0 4
scheduler allocate 20000 1000
webvpn gateway SSLVPN
ip interface GigabitEthernet0/0 port 443
ssl trustpoint local
inservice
webvpn install svc flash:/webvpn/svc.pkg
webvpn context SSLVPN
ssl authenticate verify all
policy group default
   functions svc-required
   svc default-domain "test.org"
   svc keep-client-installed
   svc split dns "primary"
default-group-policy default
gateway SSLVPN
inservice
end

Using the SDM follow the below config example
http://www.cisco.com/en/US/products/ps6496/products_configuration_example09186a008071c58b.shtml
The text "cisco 3800 ssl vpn configuration" in my favorite search engine, identified the above.
HTH>

Large XML Publisher reports fail with client-error-request-value-too-long

We are running BI Publisher 5.6.3 with Oracle Applications 11.5.10.2 (ATG.H RUP 5), and are having frequent failures with client-error-request-value-too-long messages on large PDF reports that cause the entire report to not print.
The exact error message is as follows:
lp: unable to print file: client-error-request-value-too-long
Pasta: Error: Print failed. Command=lp -c -dPDX_B6_1LJ5200NEAST /logs/temp/pasta3262_0.tmp
Pasta: Error: Check printCommand/ntPrintCommand in pasta.cfg
Pasta: Error: Preprocess or Print command failed!!!
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1
Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. Program exited with status 1.
Action: Review your concurrent request log file for more detailed information.
I have Google'd client-error-request-value-too-long, and found it is a common CUPS issue on Linux. The popular solutions (having /var/spool/cups and /var/spool/cups/tmp) are already in place. Also, the temp files are nowhere near 2 GB (44MB).
Has anyone had this issue with BI Publisher on Linux?

Thanks for the link. It looks like the sysadmins have throttled cups to low to allow large bitmapped print jobs:
grep MaxRequestSize cupsd.conf
# MaxRequestSize: controls the maximum size of HTTP requests and print files.
MaxRequestSize 10M
I am trying to get a more reasonable size limit.

Large BI Publisher reports fail with client-error-request-value-too-long

We are running BI Publisher 5.6.3 with Oracle Applications 11.5.10.2, and are having frequent failures with client-error-request-value-too-long messages on large PDF reports that cause the entire report to not print.
The exact error message is as follows:
lp: unable to print file: client-error-request-value-too-long
Pasta: Error: Print failed. Command=lp -c -dPDX_B6_1LJ5200NEAST /logs/temp/pasta3262_0.tmp
Pasta: Error: Check printCommand/ntPrintCommand in pasta.cfg
Pasta: Error: Preprocess or Print command failed!!!
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1
Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. Program exited with status 1.
Action: Review your concurrent request log file for more detailed information.
I have Google'd client-error-request-value-too-long, and found it is a common CUPS issue on Linux. The popular solutions (having /var/spool/cups and /var/spool/cups/tmp) are already in place. Also, the temp files are nowhere near 2 GB (44MB).
Has anyone had this issue with BI Publisher on Linux?

The linux sysadmins set the cups max_request_size at 10 MB, which was causing this error. Once the restriction was lifted, the reports ran without error.

Cisco Flex 7500 controller with client disconnects

Hey All,
There will be alot of info in this post, hopefully all helpful, more info the better right! If you require anymore info to help me out to not hesistate to request it.
We have been having some issues with clients connecting and disconnecting several times a day and having to manually reconnect from the icon on their taskbar. We have about 380 APs, and 200+ more to deploy that we have and are licensed for but are having some issues that we want to resolve first obviously.
Some locations our setup is a bit more complex than this with multiple SSIDs and vlans, but this issue is everywhere so i will keep it to our simple setup for now:
AP Models: AIR-LAP1042N-A-K9, AIR-CAP1602I-A-K9 (Most locations do not have a mix of both, most have 1042s)
Running a single SSID - WPA/WPA2 with: WPA - TKIP and WPA2 - AES on the same SSID.
They talk back to a Cisco Flex 7500 Series through a tunnel (should not be any port blocking preventing communication)
We are running from what i understand a bad firmware version (7.6.100.0) and during our next maintenance window i am going to try and get them to change to a more stable firmware version.
Data Rates of 1,2,5.5,11 Mbps are disabled
TPCv1 coverage running
Automatic Power Assignment
I will not focus on the a/n/ac network as most of our devices are connecting to WPA due to the config they already have.
Ideally i would like to get rid of WPA all together but i am not 100% in control of the decisions to get the started and people here like to delay things lol.
It is hard to say if the issue is specific to a model as we have so few 1602Is, and it is just at our main office. I have not heard many complaints but i have noticed i will now and then get a limited or no connectivity settings on my wireless icon on my PC. I use hard-wired so i don't really notice if it is not working.
In most locations it looks like the controller is doing a decent job at selection channels to use. I did find one spot where it had on 11 APs down a long hallway, and did not use channel 6 once. I statically set that location to stagger the channels to see what kind results we had and am still waiting to hear on that as they complained the most out of all of our locations. In some cases 3 APs in a row were on channel 1 in the hallway, in alot of casses 1 was 2 times in a row as well as 11 so there was alot of overlap.
I am attaching my show sysinfo and show wlan 17 for that informtion, some of the other settings i have changed today that were previously enabled/set different are:
Disabled Cisco Aironet IE
Set channel automatic rescan from 10 mintues to 12 hours as i can image if it is changing the channels alot it can lead to disconnects.
Some of the main things we get in our message log are:
*dot1xMsgTask: Oct 16 15:17:36.943: #DOT1X-4-MAX_EAPOL_KEY_RETRANS: 1x_ptsm.c:508 Max EAPOL-key M5 retransmissions exceeded for client 84:85:06:0b:a6:33
    - Not sure why we get this as we have a PSK and do not have local eap enabled.....
*apfMsConnTask_6: Oct 16 15:19:01.753: #APF-3-AID_UPDATE_FAILED: apf_80211.c:6570 Error updating Association ID for REAP AP Clientc8:f9:f9:2b:fd:50 - AID 4
*apfMsConnTask_6: Oct 16 15:19:01.753: #LWAPP-3-INVALID_AID2: spam_api.c:1462 Association identifier 4 for client 18:9e:fc:4d:9e:87 is already in use by 8c:2d:aa:b7:70:5e
    - There is a bug for this log, but according to the bug our 7.6.100.0 is not effected
Here is my show sysinfo:
(Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.6.100.0
RTOS Version..................................... 7.6.100.0
Bootloader Version............................... 7.6.101.2
Emergency Image Version.......................... 7.6.101.2
Build Type....................................... DATA + WPS
System Name...................................... Cisco_cf:17:26
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1295
Redundancy Mode.................................. Disabled
IP Address....................................... 10.156.50.100
System Up Time................................... 52 days 5 hrs 54 mins 25 secs
System Timezone Location......................... (GMT -4:00) Altantic Time (Canada)
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180
Configured Country............................... CA - Canada
--More-- or (q)uit
Operating Environment............................ Commercial (10 to 35 C)
Internal Temp Alarm Limits....................... 10 to 38 C
Internal Temperature............................. +22 C
Fan Status....................................... OK
RAID Volume Status............................... OK
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 13
Number of Active Clients......................... 1584
Burned-in MAC Address............................ 70:81:05:CF:17:20
Power Supply 1................................... Present, OK
Power Supply 2................................... Present, OK
Maximum number of APs supported.................. 600
Here is my Show wlan 17
WLAN Identifier.................................. 17
Profile Name..................................... AirCCRSB
Network Name (SSID).............................. AirCCRSB
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
Client Profiling Status
    Radius Profiling ............................ Disabled
     DHCP ....................................... Disabled
     HTTP ....................................... Disabled
    Local Profiling ............................. Disabled
     DHCP ....................................... Disabled
     HTTP ....................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
Number of Active Clients......................... 1768
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 28800 seconds
User Idle Timeout................................ Disabled
Sleep Client..................................... disable
Sleep Client Timeout............................. 12 hours
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... Cisco_cf:17:26
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ management
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
WLAN Layer2 ACL.................................. unconfigured
mDNS Status...................................... Disabled
mDNS Profile Name................................ unconfigured
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
Quality of Service............................... Silver
Per-SSID Rate Limits............................. Upstream      Downstream
Average Data Rate................................   0             0
Average Realtime Data Rate.......................   0             0
Burst Data Rate..................................   0             0
Burst Realtime Data Rate.........................   0             0
Per-Client Rate Limits........................... Upstream      Downstream
Average Data Rate................................   0             0
Average Realtime Data Rate.......................   0             0
Burst Data Rate..................................   0             0
Burst Realtime Data Rate.........................   0             0
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Disabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
   Authentication................................ Global Servers
   Accounting.................................... Global Servers
      Interim Update............................. Disabled
      Framed IPv6 Acct AVP ...................... Prefix
   Dynamic Interface............................. Disabled
   Dynamic Interface Priority.................... wlan
Local EAP Authentication......................... Disabled
Security
   802.11 Authentication:........................ Open System
   FT Support.................................... Disabled
   Static WEP Keys............................... Disabled
   802.1X........................................ Disabled
   Wi-Fi Protected Access (WPA/WPA2)............. Enabled
      WPA (SSN IE)............................... Enabled
         TKIP Cipher............................. Enabled
         AES Cipher.............................. Disabled
      WPA2 (RSN IE).............................. Enabled
         TKIP Cipher............................. Disabled
         AES Cipher.............................. Enabled
                                                               Auth Key Management
         802.1x.................................. Disabled
         PSK..................................... Enabled
         CCKM.................................... Disabled
         FT-1X(802.11r).......................... Disabled
         FT-PSK(802.11r)......................... Disabled
         PMF-1X(802.11w)......................... Disabled
         PMF-PSK(802.11w)........................ Disabled
      FT Reassociation Timeout................... 20
      FT Over-The-DS mode........................ Enabled
      GTK Randomization.......................... Disabled
      SKC Cache Support.......................... Disabled
      CCKM TSF Tolerance......................... 1000
   WAPI.......................................... Disabled
   Wi-Fi Direct policy configured................ Disabled
   EAP-Passthrough............................... Disabled
   CKIP ......................................... Disabled
   Web Based Authentication...................... Disabled
   Web-Passthrough............................... Disabled
   Conditional Web Redirect...................... Disabled
   Splash-Page Web Redirect...................... Disabled
   Auto Anchor................................... Disabled
   FlexConnect Local Switching................... Enabled
   flexconnect Central Dhcp Flag................. Disabled
   flexconnect nat-pat Flag...................... Disabled
   flexconnect Dns Override Flag................. Disabled
   flexconnect PPPoE pass-through................ Disabled
   flexconnect local-switching IP-source-guar.... Disabled
   FlexConnect Vlan based Central Switching ..... Disabled
   FlexConnect Local Authentication.............. Disabled
   FlexConnect Learn IP Address.................. Enabled
   Client MFP.................................... Optional
   PMF........................................... Disabled
   PMF Association Comeback Time................. 1
   PMF SA Query RetryTimeout..................... 200
   Tkip MIC Countermeasure Hold-down Timer....... 60
   Eap-params.................................... Disabled
AVC Visibilty.................................... Disabled
AVC Profile Name................................. None
Flow Monitor Name................................ None
Split Tunnel (Printers).......................... Disabled
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID     IP Address            Status
802.11u........................................ Disabled
MSAP Services.................................. Disabled
Local Policy
Priority Policy Name

As long as you take the configuration backup downgrading from 7.6.100.0 to 7.4.121.0 should be fine. Because this is Flexconnect deployment, make sure you review the release notes thoroughly as config like vlan mapping is impacted it is painful to reconfigure.
I still think moving to 7.6MR3 & once 8.x get stable going for that code is a good plan. Though 7.4.121.0 is assure wave it does not mean it has no bugs.(remember that prior to this 7.4.110.0 was assure wave & it deferred in quick time) . I would say 8.x going to be the code staying for long time period, so ultimately you have to be there.
In 8.x there are few FlexConnect improvements,one being AP won't reload when you change from local mode to FlexConnect.
HTH
Rasika
**** Pls rate all useful responses ***

How to invalidate the client part of a HTTPS Session with client auth

Hi to everybody here,
I'm having an issue with HTTPS and client authentication related with how SSLHandshake works and the behavior of the client browser. I hope you can help.
I'm setting up a web application that ask for a valid session in order to allow access to the application. If the user has no valid session, he's redirected to the login form, and if the auth process is ok, the user gets a session and is redirected again to the secured pages.
We are in the way to create a new login service with client certificates, so the user identificates himself with a certificate valid on the application server.
We have an application server with a secure listener in port 8443. It's configured to request client certificates so we can access to the certificate and validate it and create a session for the user automatically. The user just type his pin code in the browser, no passwords at all. This process is working and sessions are created. The problem comes up when we are trying to log the user out.
We invalidate the session using a logout.jsp, but if the user goes to the secured pages again, we have observed that the authentication takes place automatically and the user can see the secured pages, so he thinks the logout.jsp doesn't work.
My questions are: can we access to delete or modify the client browser ssl part in order to reset the https connection established against our application server? Are there any other ways to avoid this behavior?
Thanks in advance.
Miss.

An enduser presents a certificate from a CAC for authentication to our website.
They pick the Cert off the inserted CAC and submit it. Get logged into the application successfully.
The user removes the card form the reader and the SSO session times out.
In the same browser the user clicks log in with CAC and is not prompted for the cert this time the browser just goes ahead and presents the cached cert even though the card is no longer in the reader. The user logs in successfully.
The desired behavior would be to prompt the user for for a cert again obviously.
I am wondering how to turn this off as well.

Enabling HTTPS with Client Authentication for Sender SOAP Adapter on PI7.1

Hello All,
We are currently building up a HTTPS message exchange with an external client.
Our PI 7.1 recieved over HTTPS messages on an already configured Sender SOAP Adapter.
The HTTPS (SSL) connectivity works fine and was completely configured on the ABAP Stack at Trust Manager (TC=STRUSTSSO2)
Login to Message Servlet "com.sap.aii.adapter.soap.web.MessageServlet is required and works fine with user ID and password.
Now we have to configure the addtional Client Authentication.
At SOAP Adapter (Sender Communication Channel) under "HTTP Security Level"you are able to configure "HTTPS with Client Authentication".
But what are the next steps to get this scenario successfully in place?
Many thanks in advance!
Jochen

Hi Colleagues,
following Steps still have to be done:
- Mapping public key to technical user at Java Stack
As preparation you have to activate value "ume.logon.allow.cert" with true under "com.sap.security.core.ume.service" under Config Tool. At NWA under Identity Management at for repecively technical user the public key certificate
- Be sure CA root certivicate at Database under STRUSTSSO2
- Import intermediate Certificate under Certificate List at Trast Manager for the Respecive Server Note
- use Login Module "client_cert" which you have to configure under NWA\Configuration Management\Authentication for Components "sap.com/com.sap.aii.adapter.soap.app*XISOAPAdapter".
Many thanks to all for support!
Regards,
Jochen

HTTPS with Client Authentication not available in EHP1?

Hi Guys,
I am not seeing this option in PI 7.1 EHP1.
At SOAP Adapter (Sender Communication Channel) under "HTTP Security Level"you are able to configure "HTTPS with Client Authentication".
any help would be appreciated
Thanks,
Srini

Hi Srinivas,
I didnot use it personally. But when I see on SAP help I dont see that option anywhere. Please see this sap help:
http://help.sap.com/saphelp_nwpi711/helpdata/en/48/3555240bea31c3e10000000a42189d/content.htm
But you have an option sender agreeement for security. Please see this help:
http://help.sap.com/saphelp_nwpi711/helpdata/en/48/ceb8cf18d3424be10000000a421937/content.htm
Since we have the option to skip the adapter engine they have enabled this option in http adapter. So you can directly hit to integration engine skipping the adapter framework, which will help in improving the performance. Please see this help on this:
http://help.sap.com/saphelp_nwpi711/helpdata/en/43/64db4daf9f30b4e10000000a11466f/frameset.htm
Regards,
---Satish

How to make call to Sender Soap Adapter using HTTPS with Client Aut

Hello everyone, I have spent some time trying to get this to work. We downloaded a trail certificate from SAP and installed it on our machine and I created a webservice that works great. I tested the HTTPS without client authentification and it works great, as soon as I change it to use with Client Authentification I can't get it to go through. I am using Soap Sonar to test the certificates. To get the certificate I called the url with firefox then saved the certificate in my trust store, from there I import it to soap sonar as a signed certificate, but I am getting the error <Exception>Object contains only the public half of a key pair. A private key must also be provided.</Exception> I assume I am doing something way wrong, is there a way to get the certificate with both public and private key pair, or a way to test this that I can't seem to find in documentation or blogs?
I def award points
Cheers
Devlin

Hi
I think This link is useful to u
http://www.sapag.co.in/SAP-XI-SOAP-Adapter-FAQ'S.html
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40611dd6-e66e-2910-f383-e80fb44f9cd4
Thanks
Santosh

I want to share my video edits with clients in the cloud but can't

I was under the impression I was able to easily share my video edits with clients for a simple seamless workflow. Upon trying this I learn that I am unable to share video files over the cloud. Why is this? and how can I do this? I know you use to be able to within premiere.
Does it need to be exported in a certain format or is it simply not supported to do this in the cloud.
Thanks.
-Paul

Hi Perfect Pair,
Creative Cloud is not currently able to be used in this way but this is something our developers are considering adding in the future.
Please share your feedback about what file formats you typically work with, what kind of a workflow would work best for you and what related features would be the most important for you on our ideas section.
Here is a link
http://forums.adobe.com/community/create-idea!input.jspa?container=4670&containerType=14
-Dave

Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013

Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013
Detected Problems:
- Access denied for attached mailbox (department mailbox)
- Access denied for delete or move messages on own mailbox
- Can't send new messages with error (Error: [0x80004005-00000000-00000000])
Solution:
- Rollback to Exchange 2010 SP3 - Rollup 7
- You can rollback to Exchange 2010 SP3 - RollUp 7 in 30 min
Algunos de los destinatarios no recibieron su mensaje.
Asunto: Hola
Enviado el: 11/12/2014 8:35
No se puede localizar a los destinatarios siguientes:
'[email protected]' en 11/12/2014 8:35
Este mensaje no se pudo enviar. Inténtelo de nuevo más tarde, o póngase en contacto con el administrador de red.
Error: [0x80004005-00000000-00000000].

See the following forum thread:
https://social.technet.microsoft.com/Forums/en-US/1be9b816-b0ab-40ea-a43a-446239f8eae3/outlook-client-issues-following-exchange-2010-rollup-8

HTTPS with Client Authentication in SOAP sender Adapter --SSL

We have an interface SOAP to file..which was working fine...now we recently switched to F5 load balancer and hence we were asked to chnage the settings in Communication channel.
After changing the communication channel to u201CHTTPS with Client authenticationu201D..client trggerd the some data but nothing seems to be coming in PI..
No trace in communication channel either.where else can we check for the incoming data ?
Is there any other setting required? why the data s not coming to PI?
Regards

Hi,
here is the flow: Bank>F5-->PI.
when the Bank client send the message
they are getting the message below. Could you please tell me what could be the reason?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Invalid SSL message, peer seems to be talking plain!</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
regards

Interview with Client

Similar Messages

Maybe you are looking for