Introducing the Vertical Scrollbar to a selection screen.

hi all,
I wrote a program and use the WRITE command to display its values. code below...
WRITE:/(181) sy-uline.
WRITE:/ 'MVT',
sy-vline, 'ADDITIVES',
25 sy-vline,'CIRCLES',
44 sy-vline,'COILS',
64 sy-vline,'INGOT',
83 sy-vline,'PRO. SCRAP',
103 sy-vline,'PUR. SCRAP',
123 sy-vline,'SHEETS',
142 sy-vline,'SLAB',
163 sy-vline, 'impscrap',
181 sy-vline.
WRITE:/(181) sy-uline.
The problem i have now is that the whole data seem distorted because there is no vertical scrollbar.....Is it possible to add a scroll manually or it has to be done only automatically.. and if automatically under what condition does this happen?? Thanks..

Your question is somewhat confusing.
You ask about the selection screen, but the question seems more related to the report.
You say vertical scrollbar, but the report seems to need a horizontal scrollbar.
In ane event, try adding:
LINE-SIZE 255
to the REPORT statement.
Rob

Similar Messages

Scroll down programmatically the vertical scrollbar in hierarchical trees

I manually select nodes in the tree. When the node is expanded the leaf nodes doesn4t appear on the screen. Then
I have to scroll down the vertical scrollbar to see it.
Is it possible to scroll the tree so that the selected node
appears on the screen ??
My forms version is 6.0.8.19.2
Best regards

You can make use of the property "Index Vals" and write a new value to the Table as shown below
Regards
Guru (CLA)
Attachments:
1.png ‏23 KB
1.png ‏23 KB

Cuatom Forms: Loosing the Vertical scrollbar when resizing the Window

Hi All
I have developed a Custom Form. In that there is a Content Canvas and on the top of that I have put a Stacked Canvas so that i can get both the Horizontal and Vertical scrollbars. the form has more than 40 fields to display.
Folder tool functionality has also been added to the Form.
The form works absolutely fine and scrollbars too.
But when I am resizing the window (making the window size bigger or smaller by dragging the window on the Oracle Apps screen), at that time I am loosing the vertical Scrollbar. Other than Vertical scrollbar everything works fine.
Is there any way (any code) by which the Vertical Scrollbar will not disappear.
I would really appreciate if any one could guide me on this.
Thanks
Madhu

Madhu,
Please post your message in the Oracle E-Biz forum. This forum is for Non-EBS Forms development and everyone here may not have EBS Forms development experience.
That having been said, I encountered this about a year ago. If I remember correctly, we were able to resolve the issue by applying a Forms server patch to the Apps Tech stack. Please check Metalink to verify.
Craig...

How to schedule the background job using current selection screen field val

Hello Friends,
How to schedule the background job using current selection screen field values.
after completion of the job the spool should be sent as a mail to SAP Inbox.
Is there any way to create the variant dynamically by reading the current selection screen values.
Thanks,
Ravi

Hi,
To get the variant details you can use teh following FM.
'RS_VARIANT_CONTENTS'.
Regards,
Ankur Parab

Reports-- to validate the field values in a selection screen

How to validate a Particular field ..... in the selection screen ...!
that is how to determine the values of the field in the selction screen .....

Hi,
Check the code below:
at selection-screen.
SELECT SINGLE * FROM MSEG WHERE
MBLNR = IMBLNR.
IF SY-SUBRC <> 0.
MESSAGE E016(PG) WITH 'Please select valid Material Document Number'.
ENDIF.
I used it in my program.
Hope this helps.
Reward if helpful.
Regards,
Sipra

Is it possible to rearrange the order of SAP STD Selection Screen?

Hi.
Is it possible to rearrange the order of SAP STD Selection Screen?
Example:
IW69 has Location data selection at bottom of screen.
Is it possible to move that to top of the selection screen?
We are on ECC6.0.
Thank you,
Brett.

Hello Brett
You may try to use GuiXT:
[Adjusting Transactions Using GuiXT|http://help.sap.com/saphelp_sm32/helpdata/en/89/91b9db194f11d5b3a30050dae02d7c/content.htm]
Regards
Uwe

Setting only the TO field on the Created on Field in Selection screen to Current date

Hello,
We have a requirement to Set only the To date in the Created on Field in Selection screen to the Current date, I have tried through Dynamic variable option to set the Date calculation but I am able to see Options to set the Current date to From or From and To Created on Date fields instead of setting the Current date only to To created on Field.
We are in 4.7 and are not supported with user defined variables, Appreciate your inputs on this.
Thanks and Regards
Mohammed Roshan

>
sunitha j wrote:
> Hi ,
>
> It would br gr8..if u could give some more info about the usage of this class..i mean if i hav to implement it in my program....wat is the necessary data that needs to b copied...
>
> Thanx,
> Sunitha
what Text field you want to change.
Since you are working with Dynpros , you have to split the screen in two parts, and one for the Showing differenet fonts and other your normal Dynpro information.
you need to use the Method ADD_TEXT Did you check the program DD_STYLE_TABLE.

Styling the Vertical Scrollbar of a Tilelist

Is there any way within flex to style the vertical scrollbar of a tilelist rather than using the boring default scrollbars? What I have in mind is to have an up and a down arrow at the top and bottom of where the regular scrollbar would actually be then when my tilelist has more items than it's heaight these arrows will enable and act like a scrollbar.
Is this possible?

This example uses Degrafa (right-click to View Source):
http://pv3d.org/2009/04/14/theres-more-than-one-way-to-skin-a-scrollbar/
http://www.foxarc.com/blog/article/101.htm
If this post answers your question or helps, please mark it as such.

At times when dragging the vertical scroll bar my computer screen oscillates up and down for some time before going blank or not responding to any clicks requiring a forced system restart. What is wrong?

Hi,
Suddenly while working with Firefox if I happen to drag the vertical scroll bar, a very abnormal behavior occurs. My screen dances up and down for a short time before either going black or getting restored but with no clicks working. The only way to resume is to force a restart of the system.
Any help would be deeply appreciated.
Thanks and Regards
Deepak

That didn't work. On trying to install a new driver I got the error the graphics driver could not find compatible graphics hardware. Is there anything else that can be done to at least prevent the hanging of the computer even if it means less features from Firefox being available?

How to add default value to the Exclude single value in selection screen..

Hi Experts,
i have searched in sdn, but not able to get proper results,
in my report i have a selection screen, in that there is a Select-option like status, for this status i need to exclude '02'
for this i need to add the default value under exclude singale values option, not in lower and upper limit.
can anyone help me...
Regards,
Sudha.
Moderator message: please search for available information/documentation before asking, don't just claim you did.
Edited by: Thomas Zloch on Oct 27, 2010 2:50 PM

Hi,
you can use the function module SELECT_OPTIONS_RESTRICT .
This function module simplifies the handling of SELECT-OPTIONS on the selection screen by restricting possible selection options and signs.
By calling this function module, you can restrict the number of selectio options available for the chosen selection field. You can also disable the function allowing users to enter values to be excluded from the selection (SIGN = 'E').
Regards,
S.Velsankar

Index of Values in the List Boxes on a Selection Screen

Hi,
I have a list box on the selection screen for Month field. It has the values Jan, Feb, Mar....etc in it.
These entries, I added thru the VRM_SET_VALUES.
Now, I want to default the month to current month SY-DATUM+4(2).
Is there any FM to which I can send this SY-DATUM+4(2) as an Index and the corresponding value gets set for the Month field.
As an alternatvie, I could use Case Sy-DATUM+4(2). when '01'. p_month = 'Jan'. etc etc.. But I want to avoid this big case statement.
Please suggest.
Thanks,
Suryakiran D.

Hi Suryakiran,
Try to use the func MONTH_NAMES_GET.It will
return the month name along with the number.
And also you can directly select from table T247
Thanks&Regards,
Siri.
Message was edited by: Srilatha T

Validating the Program Run Date on selection screen

Hi ,
REGUH-LAUFD field has to be validate on selection screen parameter, for this filed no check table available in REGUH.
Finally date should be validate through any table as per my concern.
Could please anyone tell me that which table i have to go for validate the above field.
Regards,
sud

>
sudsap wrote:
> Hi ,
>
> REGUH-LAUFD field has to be validate on selection screen parameter, for this filed no check table available in REGUH.
>
> Finally date should be validate through any table as per my concern.
>
> Could please anyone tell me that which table i have to go for validate the above field.
>
>
> Regards,
> sud
REGUH-LAUFD is the date that the payment run has created. There is no such foreign key check for this date. If you want, you create your own table and do your checks but not advisable.
What is your requirement anyway?

Determine the active tab in a selection screen

Hello,
is it possible to determine which tab is currently activated in a selection screen with several tabs?
I will include different code in different tabs. When pressing the "execute" button the program should return the active tab (as a value).
Thanks
Florian Schwaiger

Hi florain,
Before you can use a tabstrip control in your ABAP program, you must create a control for each control in the declaration part of your program using the following statement:
CONTROLS <ctrl> TYPE TABSTRIP.
where <ctrl> is the name of the tabstrip area on a screen in the ABAP program. The control allows the ABAP program to work with the tabstrip control. The statement declares a structure with the name <ctrl> . The only component of this structure that you need in your program is called ACTIVETAB.
Use in the PBO event
Before the screen is displayed, you use the control to set the tab page that is currently active. To do this, assign the function code of the corresponding tab title to the component ACTIVETAB:
<ctrl>-ACTIVETAB = <fcode>.
When you page at the SAPgui, you only need to do this once before the screen is displayed. This initializes the tabstrip control. The default active tab page is the first page. After this, the page activated when the user chooses a tab title is set within SAPgui.
When you page on the application server, you must assign the active page both before the screen is displayed for the first time, and each time the user pages. At the same time, you must set the required subscreen screen.
You can suppress a tab page dynamically by setting the ACTIVE field of table SCREEN to 0 for the corresponding tab title.
Use in the PAI event
In the PAI event, ACTIVETAB contains the function code of the last active tab title on the screen.
When you page in the SAPgui, this allows you to find out the page that the user can currently see. When you page at the application server, the active tab page is controlled by the ABAP program anyway.
The OK_CODE field behaves differently according to the paging method:
Paging in the SAPgui
When you page in the SAPgui, the PAI event is not triggered when the user chooses a tab title, and the OK_CODE field is not filled. The OK_CODE field is only filled by user actions in the GUI status or when the user chooses a pushbutton either outside the tabstrip control or on one of the subscreens.
Paging on the application server
If you are paging at the application server, the PAI event is triggered when the user chooses a tab title, and the OK_CODE field is filled with the corresponding function code.
To page through the tabstrip control, you must assign the function code to the ACTIVETAB component of the control:
<ctrl>-ACTIVETAB = <ok_code>.
This statement overwrites the function code of the last active tab page with that of the new tab title. At the same time, you must ensure that the correct subscreen is inserted in the subscreen area.
Otherwise, tabstrip controls are handled like normal subscrens in ABAP programs, that is, the ABAP program of a subscreen screen must contain the dialog modules called from the flow logic of the subscreen.
Examples
Tabstrip control, paging at SAPgui
REPORT DEMO_DYNPRO_TABSTRIP_LOCAL.
CONTROLS MYTABSTRIP TYPE TABSTRIP.
DATA: OK_CODE TYPE SY-UCOMM,
 SAVE_OK TYPE SY-UCOMM.
MYTABSTRIP-ACTIVETAB = 'PUSH2'.
CALL SCREEN 100.
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE USER_COMMAND INPUT.
SAVE_OK = OK_CODE.
CLEAR OK_CODE.
IF SAVE_OK = 'OK'.
 MESSAGE I888(SABAPDOCU) WITH 'MYTABSTRIP-ACTIVETAB ='
 MYTABSTRIP-ACTIVETAB.
ENDIF.
ENDMODULE.
thanks
nagendra

Hide the Range Option in Multiple Selection screen

Hai,
I Give the values In single Values In Selection Option Screen.
I want to need Hide the Range Option Include or Exclude In Multiple selection screen.
Regards,
Geetha

just check this it may help you
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/840ad679-0601-0010-cd8e-9989fd650822">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/840ad679-0601-0010-cd8e-9989fd650822</a>
here restricting the selection screen
regards
shiba dutta

Report Painter: How to change the order of lines in selection screen

Dear Gurus on Report Painter,
how can I change the order of the lines (where the values for the variable selection of my cost center report are entered) in the selection screen of a report painter report? The Selection screen looks awful.
Is there also a possibility to add another description to each line of the selection screen?
Thank you very much for your advice.
Best regards Timo

I am afraid you have much choice in choosing the order of the selection parameters. However, with the developer's access you may.
This is how!
Step 1: If it is a standard report, copy to your own report. and assign it to a report group. and execute.
Step 2: When you execute, and the selection appears, go to systems>status and here , copy the program name (it may look something like GP46LP6VEDORBSA2IHWYSR4TL58020)
Step3: Go to SE38 and enter the above derived program name with a view to re-arrange the line withing the program, with reference to selection parameters.
For example: I have a selection screen in the following order:
Controlling area
Fiscal Year
From period
To period
Plan version
Cost center group
Or value(s)
Cost element group
Or value(s)
The corresponding program that drives this order is in the program and would look like this,
SELECTION-SCREEN BEGIN OF BLOCK VALUE_SELECTION
 WITH FRAME TITLE TEXT-003.
 PARAMETERS: $1KOKRE LIKE CCR1S-KOKRS .
PARAMETERS: %1KOKRE LIKE CCR1S-KOKRS MODIF ID IN4.
 for controlling area
PARAMETERS: $1GJAHR LIKE COSP-GJAHR .
PARAMETERS: %1GJAHR LIKE COSP-GJAHR MODIF ID IN4.
 for fiscal year
PARAMETERS: $1PERIV LIKE COSP-PERBL .
PARAMETERS: %1PERIV LIKE COSP-PERBL MODIF ID IN4.
 for period from
PARAMETERS: $1PERIB LIKE COSP-PERBL .
PARAMETERS: %1PERIB LIKE COSP-PERBL MODIF ID IN4.
 for period to
etc.
PARAMETERS: $1VERP LIKE COSP-VERSN .
PARAMETERS: %1VERP LIKE COSP-VERSN MODIF ID IN4.
PARAMETERS: $1VALUTP LIKE CCR1S-VALUTYP MODIF ID IN4 .
PARAMETERS: %1VALUTP LIKE CCR1S-VALUTYP MODIF ID IN4.
SELECTION-SCREEN END OF BLOCK VALUE_SELECTION.
......... set variables ..............................................
SELECTION-SCREEN BEGIN OF BLOCK SET_SELECTION
 WITH FRAME TITLE TEXT-004.
PARAMETERS: $1KOSET LIKE RKSB1-KSGRU.
PARAMETERS: %1KOSET LIKE RGSBS-SETNR MODIF ID IN5.
SELECT-OPTIONS _1KOSET FOR CCR1S-KOSTL .
PARAMETERS: $1KSTAR LIKE RKSB1-KAGRU.
PARAMETERS: %1KSTAR LIKE RGSBS-SETNR MODIF ID IN5.
SELECT-OPTIONS _1KSTAR FOR CCR1Z-KSTAR .
SELECTION-SCREEN END OF BLOCK SET_SELECTION.
If you want fiscal year to appear first, you try just copying the coding relating to fiscal year just above the coding for Controlling area.
Extend the same logic for what you may want to get.

Introducing the Vertical Scrollbar to a selection screen.

Similar Messages

Maybe you are looking for