Inv_currency_code issue in projects customers and contacts form?

Hi All,
I am creating the projects using create project API (PA_PROJECT_PUB.CREATE_PROJECT) from 11i to R12.The data coming from 11i has the project currency code(INV_CURRENCY_CODE).I am passing this data to the API using record type (customer_tbl_type),but i cannot see the value in front end but the currency code is populating from the template instead of taking from the staging table.The base table is PA_PROJECT_CUSTOMERS and the field is INV_CURRENCY_CODE.
Navigation : (Projects-->Customers and contacts->code-->).
Eg:
The staging table has the currency field as 'USD' .The project which is created taking the value as "CAD' which is defaulting from the template from which the project created,but in my scenario this field should take the value from the staging table,i am passing the value from the staging table but its defaulting the value from the template?
Can anyone please let me know is there any setup issue or issue with the API or do i need to use update_Project api?
Please let me know if you need any clear explanation?
Thanks,

Check if XLACORE.plx and XLATACCT.plx library files are present in the environment you are working on.
Also check if the FND_INDICATOR_COLORS value is set to 'Y' , if not please do it.
Thanks,
Vijay.

Similar Messages

Issues with iCloud synchronisation and contacts over two or more devices. iTouch and iPad2 sync with different results from iMac. Thoughts?

Has any one experienced issues with iCloud synchronisation and contacts over two or more devices? The primary machine is an iMac running Lion. Address Book was created from vcf file (backup of address book prior to moving to iCloud). iTouch replicates Contacts just fine and matches the Address Book on the iMac. The iPad 2 does not showing only 123 contacts where there should be 200. I have turned off iCloud on both devices thus erasing the iCloud content of both devices and staring from scratch with both devices with identical results. Even turned off iCloud on the iMac and erased the Address Book and rebuilt with the same results. Anyone have any ideas or suggestions? I am going nuts.....

To follow-up with this issue:
I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
Ian

New Domain Names and Contact Form Issue

Hello all,
I'm working for a client who is using one of the newer domain name extensions. It reads like this: www.COMPANYNAME.farm
The .farm is a new extension.
On my contact form I use the e-mail address [email protected]
The e-mails are never sent through. You can submit a form, it says it sends successfully, but the e-mail is never received.
Any ideas if adobe muse has troubles with the new 'non-standard' domain extensions?
Any other solutions?
Thanks,
Jonney

Sounds like you are hosting on GoDaddy? If so, there are plenty of threads on here with the same problem.
Generally what you need to do is create a dummy hotmail address and list it first. [email protected], [email protected] and that will likely fix your problem. Kind of a crazy work around but that is a GoDaddy issue (if in fact you are hosting with GoDaddy).

Spambots and Contact Forms

I see a lot of AS3 contact forms. They don't seem to have protection from spambots - is this not as much of an issue within flash as it is in standard html pages?

No, it's not as much an issue because in an HTML page, the bot can look for the form element, and from there they can see the url where the form submits, etc... That is all contained inside the swf in Flash, making it much more difficult.

The customers and orders form modules

Please,i am new to oracle forms.I have been reading a book on forms ,but the book uses two form modules created by Oracle for demo purposes, the Customer and Orders form modules.I need to access and open these form modules from my form builder.I have not been able to figure out how to do that.Please how can i open the customers and orders module from form builder.
I will appreciate any help.

Assuming you have the .FMB files stored on your hard drive, you can simply double-click on them or use File -> Open in Forms Builder.

Menus and Contact Forms

I am currently looking for a tutorial on how to create a
drop-down Flash Menu very similiar to the one found on
http://www.perseny.com as well as
a Contact Form listed under their Private Dining section called
"Request More Info"
Any and all help is greatly appreciated!
Mark
[email protected]

if you're using as2, flashkit.com has quite a few beginning
tutorial so it probably has dropdown menu tutorial that would work
for you.
if you're using as3, you'll just have to use google.
flashgods.org has a faq section that shows how to use a
contact or email form with flash for both as2 and as3.

CMS and contact form

Hello,
does anybody know about a CMS Software, which is affordable and fits to iWeb?
I need to integrate a news sheet in the website, maintenace should be done easy ba any authorized computer.
i am also looking for a contact form to be integrated, enabling visitor to fill adress field and send an eMail request. If there is a ready solution = fine. If not, how can i put it together by myself?
Thanks in advance
regards

If you want a Newsletter, why not just use Pages if you have it? You can create something nice looking that is totally compatible with iWeb.
As far as the contact and feedback form goes go to http://www.wufoo.com or http://www.freedback.com. Freedback is good if you want something simple, but for something more stylish try out Wufoo. You can have whatever you want on the form and also choose your colours too. Then all you do is copy and paste the code into the web widget/html snippet at the bottom of iWeb and you have your form. Info is then e-mailed to you but is also stored on a database at Wufoo. You also have the option of re-directing people to Thank you page at your site.
Alternatively, you can hand code a feedback form for yourself straight into the html snippet and if you are using MobileMe you can e-mail the contents to yourself or if using a commercial server, set up formmail for your server and then use this option. I did that with my site and it works okay for me. After completing the form you are returned to a Thank You page for your formmail showing what you have entered and has been e-mailed.
If you don't know any html though, this is a little complex and you need to have some idea of what you are doing, so if you don't, then I would stick with Wufoo.

Latest Skype update - issue with lost conversations and contacts

Can anybody help with this problem?The new Skype layout looks like a classical Microsoft Office sotware (scroll-down menus from the top bar) and in spite of what was announced before installing the update, the damage to the history of conversations and contacts is massive!!!

MMy iPhone was synced with my computer and the cloud. After re syncing, pics and contacts remain in cloud and computer but won't sync to my iPhone. Even my IT guy at work is stumped! I would love to have all my pics and contacts back on my phone. I have not yet updated my iPad d air because I'm afraid the same thing will happen.

Sync issue with Outlook: Notes and Contacts ok - Calendar stopped syncing

Greetings,
Syncing (via USB cable) between my iPhone 3GS (3.1.2) and Outlook 2003 SP3 (Cal, Contacts, and Notes) has never been an issue until my recent upgrade to iTunes 9.0.2.25. Since then, I noticed that my Calendar was no longer syncing either way. When I hit "Sync", iTunes would indicate that it's going through the motion of syncing calendar but no synchronization of the items take place. Contacts and Notes continue to sync fine. One off behavior is that when I connect my iPhone via USB, I get a pop-up window with "Apple iPhone" header
indicating "Camera connected" with option to pick an app (ie. MS Word) to lauch for this action. Never seen this pop-up. I just cancel out of it.
Few things I did to try to fix the issue, in vain:
1. iTunes->Info->Advanced: forced a "Replace information on this iPhone" - no changes to my calendar
2. iTunes->Edits->Preference->Devices->Reset Sync History - all calendar entries on iPhone are gone
3. "Repair/Reinstall" iTunes by running the install executable
I stopped by the Genius Bar for an appointment related to my battery issue and asked the fellow about my sync issue. He wasn't "aware" of the issue.
Anyone has a suggestion for me to try? Thanks!!!

I tried now several things to resync my data cause it realy s*cks without. I tried to install itunes 9.0.2.25, 9.0.1 and 9.0.0 but nothing helped so far. I also tried to set Outlook 2003 as standard program for mailing (one forum wrote that helps, too) and I tried to find out if something blocks the communication betwen Outlook 2003 and itunes. But nothing could help so far, still no sync.
I find it interesting that when I connect my iphone to my PC an then switch in itunes to the device and the "info" pane where I can setup all my sync data with PIM programs that Outlook still remains there as default synced application. But the subfolder in contacts also the mail accounts that should be synced cannot be seen. The option to force itunes to overwrite the calendar, contacts, notes and mailaccount data on the iphone no matter what can be selected. But when i do the synchronisation all of these options are unmarked again.
Atm I'm thinking of tracing the problem down with Filemon.
Message was edited by: madmaxzwo

Issue with blackberry sync and contact lists

Hello!
To the bone: I'm having trouble synchronizating my contacts between my blackberry and microsoft oulook 10. The thing is that my contacts are in different lists in my blackberry and when I try to sync them with outlook (BB to outlook) it only synchronizes one list of contacts.
Any suggestions?
Regards
Solved!
Go to Solution.

That can be a little tricky sometimes.
See if this helps:
http://www.blackberry.com/btsc/KB19704
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Target group with customers and contact person

Hello at all,
I have the following problem:
I want create a target group from an externel file. This file includs CRM customer numbers and the contact person numbers.
When I use the standard import functionallity I have only the customers in the target group or the contact person. But I need both in one target group.
Is it possible to generate this target group in BW and send it to the CRM?
Thnaks for help
Best regards
Matthias Buchheim

Hi Werner,.
I assume you want to select for Organizations (BUT000 Type 2) and you want to see in the Target Group the Contact Persons which are assigned via Relationship to the Orgnizations.
Create for example a Datasource with Infoset CRM_MKTTG_BP_ORG, and under Details for Business Partner use BUT000_PER-PARTNER_GUID.
In Field Function Module maintain CRM_MKTTG_PF_BP_TAB_TO_CP.
Create an Attribute List an assign the Datasource. After Creating the Target Group you will see the Organizations with all the assigned Contact Persons via Relationsship.
Regards
Andreas
Another Tip: Create a Target Group for Persons, assign it to the Campaign, and now set the B2B Flag. Depending from your SP Level you have to apply a note so that the B2B Flag is visible (1263915)
If you set the B2B flag you will get Communication Data for letters, for a Call List from the Relationship.
Regards,
Andreas
Edited by: Andreas Pauli on Apr 29, 2009 10:18 AM

I am having issues with syncing my calender and contacts

I would like for the changes that I make on my iphone to be primary. I have sync issues with the calender and contacts. New contacts get erased and some contacts are doubles as well as email addresses. My calender entries have been erased on sync. Can someone please help???

Check the parameters in your email account against what is recommended by your email provider.
Settings > Mail, Contacts, Calendars > account
Have you contacted the support contact at your email provider?

Mail and contacts not showing in application switcher

Since upgrading to Mountain Lion, mail and contacts are not showing in the application switcher.
So, I have to re-open mail and contacts if I switch screens - it is absolutely infuriating because I constantly switch screens when I work.
Does anyone else have the same issue? My mail and contacts are on exchange server, which may have something to do with it?

Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click the line below to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

Groupware activities and contact initial load limits

Hi experts,
Contacts and business activities that have been created in CRM may be updated.Hence, the changes could be replicated to groupware.
Does anyone know the limitations concerning the volume transfer of
business activities and contacts form CRM to Groupware in:
1. Client based groupware integration
2.   Server based groupware integration
Thanks for your answer
Jeff

Hi,
Check the Site creation and assignment of Subscriptions.
All Business Partners (MESG)------     All Business partners (MESG) Subscription
All Business Transactions (MESG)-----All business transactions (MESG) subscription
Groupware Adapter - Generic Messages (by object) (MESG)-------     Groupware Adapter Messages (by object = GWA_APPLN_MSG) (MESG)
Groupware Adapter Customizing (MESG)------Groupware Adapter Customizing (MESG)
Groupware Adapter Metadata for all BDoc Types (MESG)-------Groupware Adapter Metadata for all BDoc Types (MESG)
Groupware Object master category list (MESG) -
Groupware Object Master Category List (MESG)
Groupware Object Selection Filter Fields and Values (MESG) -
Groupware Object Selection Filter Fields and Values (MESG)
If all these settings are correct it should work.
Regds...

JDev 11g TP4: ADF tables and ADF form pop-ups PPR?

I was hoping somebody could help me with the following please.
I'm currently having a bit of an issue with ADF tables and ADF forms embedded in a pop-up, where the wrong record is shown in the popup. I suspect it's a PPR problem but am unsure. My scenario:
1) I have the following table:
CREATE TABLE "CHRIS_MUIR_DELETE_ME" (
"ID" NUMBER(5,0)
"SOME_COLUMN" VARCHAR2(20 BYTE)
CONSTRAINT "CHRIS_MUIR_DELETE_ME_PK" PRIMARY KEY ("ID"));2) I have a default ADF BC EO/VO combination for this table.
3) I have an ADF Faces RC page with a read-only table based on this VO:
<af:table value="#{bindings.ChrisMuirDeleteMeView.collectionModel}" var="row"
   rows="#{bindings.ChrisMuirDeleteMeView.rangeSize}"
   emptyText="#{bindings.ChrisMuirDeleteMeView.viewable ? 'No rows yet.' : 'Access Denied.'}"
   fetchSize="#{bindings.ChrisMuirDeleteMeView.rangeSize}"
   selectedRowKeys="#{bindings.ChrisMuirDeleteMeView.collectionModel.selectedRow}"
   selectionListener="#{bindings.ChrisMuirDeleteMeView.collectionModel.makeCurrent}"
   rowSelection="single" partialTriggers="myDialog">
<af:column sortProperty="Id" sortable="false"
    headerText="#{bindings.ChrisMuirDeleteMeView.hints.Id.label}">
     <af:outputText value="#{row.Id}">
        <af:convertNumber groupingUsed="false" pattern="#{bindings.ChrisMuirDeleteMeView.hints.Id.format}"/>
     </af:outputText>
</af:column>
<af:column sortProperty="SomeColumn" sortable="false"
     headerText="#{bindings.ChrisMuirDeleteMeView.hints.SomeColumn.label}">
    <af:outputText value="#{row.SomeColumn}"/>
</af:column>
</af:table>Note that rowSelection is set to "single".
3) The page also includes a popup-dialog combo that shows the same data from the table (ie. they're based on the same VO) as an ADF Input Form:
<af:popup id="myPopUp">
<af:dialog type="okCancel" id="myDialog">
     <af:panelFormLayout>
        <af:inputText value="#{bindings.Id.inputValue}"
            label="#{bindings.Id.hints.label}"
            required="#{bindings.Id.hints.mandatory}">
           <f:validator binding="#{bindings.Id.validator}"/>
           <af:convertNumber groupingUsed="false" pattern="#{bindings.Id.format}"/>
        </af:inputText>
        <af:inputText value="#{bindings.SomeColumn.inputValue}"
            label="#{bindings.SomeColumn.hints.label}"
            required="#{bindings.SomeColumn.hints.mandatory}"/>
        </af:inputText>
     </af:panelFormLayout>
</af:dialog>
</af:popup>Note that the table's partialTriggers is set to the id of the dialog. This implies on return from the dialog, the table will update itself to reflect any changes.
4) I have a data bound Create commandButton, + a simple Edit commandButton. The Edit button includes an <af:showPopupBehavior> to display the popup:
<af:commandButton
    actionListener="#{bindings.Create.execute}" text="Create"
    disabled="#{!bindings.Create.enabled}"
    partialTriggers="table1"/>
<af:commandButton text="Edit">
    <af:showPopupBehavior popupId="myPopUp"/>
</af:commandButton>If you run the form with the following steps, you can reproduce my issue:
1) Click the create button, this will create a blank record in the <af:table>
2) Click the edit button and give the 2 fields values, press ok. Note this is reflected back in the table.
3) Click the create button, you will now see another blank record in the <af:table>. Note that the current row selection highlight is on the new record.
4) In the table select the original record, then the Edit button. Oddly the input form is showing the blank record, not the original record even though we selected it in the <af:table>
This implies to me that I have to hook up a PPR event such that the fields on the popup know to update themselves when the user selects a new row in the table.
I've tried setting the partialTriggers property for the popup, dialog and individual fields on the popup page to the table id, but this doesn't seem to work.
Does anybody have any suggestions on how I'm meant to hook up the partialTriggers in this case? I'm at a bit of a loss to know what to do to solve this issue. Is it possible the table selectionListener isn't working?
Thanks for your help in advance.
Regards,
CM.

G'day gang
This morning I had a chance to play with Pavle's suggestions, specifically the popup contentDelivery option, and it's solved the issue. Specifically changing the contentDelivery option to lazyUncached was the golden solution.
As the popup component help states, the default functionality is: "lazy -- the default strategy described above. The content isn't loaded until you show the popup once, but then is cached."
....cached being the issue I was seeing.....
While the lazyUncached options states: "lazyUncached -- the content isn't loaded until you show the popup, and then is re-fetched every subsequent time you show the popup. Use this strategy if the popup shows data that can become stale."
The nasty thing about the lazy option is the fact that in the dialog it can show the previous cached result (even though you've selected a different record), and you can even appear to edit that cached result in the dialog, but when you press okay in the dialog and return to the previous table, it's updated the record you selected, not the cached result.
Confusing, but not a bug if you understand the popup contentDelivery options.
Frank, if you'd like it, I have the simple test case available to send you. But as it's not a bug I wont send it to you unless requested.
Thanks to both of you for your assistance with this one. Once again your help is much appreciated! :)
I'll take time out to blog about this in the next few weeks to assist others.
Thanks & regards,
CM.

Inv_currency_code issue in projects customers and contacts form?

Similar Messages

Maybe you are looking for