Invalid aggregation:( The number received in BW does not tally

Hi Guru's,
We are currently facing issue in uploading data in to data traget cube which is showing green symbol in the request status,
While in monitor it is showing yellow status on the status tab.
I have checked in the request:
So I have deleted the request and then reloaded it again.
I have checked the load which is completed as the number of records are daily.
But still this status is in yellow so currently I need help to wether, to make the status green manually.
If so what are the implications.
Kindly help me in this regards.
Here is the Error detais:
Technical:The number received in BW does not tally with the updated number.
Processing Step: Update rules
In step by step:
Error which is in red: Inadmissable Aggregation?
Invalid aggregation in the update The number received in BW does not tally with the updated number.
In details tab:
Diagnosis
     No errors found. The current process has probably not finished yet.
System Response
     The ALE inbox of BI is identical to the ALE outbox of the source system
     or
     the maximum wait time for this request has not yet been exceeded
     or
     the background job has not yet finished in the source system.
Thanks for helping me in this regards in advance.

Hi,
I am not sure if the solution is still relevant but we faced a similar problem and we found the solution, so wanted to share with you .
This error of 'Invalid aggregation' occurs if there are records in error and if the checkbox "No aggregation allowed" is selected in 'Error Handling' under 'Update' tab of Infopackage maintenance.
Please carry out the followig steps:
1) Go to the respective infopackage
2) select tab Processing, make sure radio button "Only PSA" and the checkbox "update subsequently to data targets" is selected.
3) On the Update tab, click on the button "Error Handling" at the bottom
4) Now of the available three radio buttons choose as per your requirement.(select 'valid records update, reporting possible(green)' for master data)
5) Now, uncheck the box 'No aggregation allowed'
What the last step does is that, the data is aggregated for the correct records and not for the incorrect records.
So, in case of an error we will get a separate request for incorrect records, which we can correct and upload later to the respective target.
This should help resolve the error.
Regards,
Roney.

Similar Messages

Serial number for suite works, while the number for acrobat pro does not

I previously purchased adobe cs 5 which came with discs for the suite as well as acrobat pro. They were all on my windows computer working fine but when I got a new laptop the serial number worked for the suite but not the acrobat pro. I am not sure what I am doing wrong.

If Acrobat came as part of the Suite then you need to install it using the Suite disc. If it came as a separate application then you need to find the serial number that came with it as well and use that. Check you Adobe account online to see if you have Acrobat as a separate product.

Centro, set up , does zincronising is essential for centro to function, my receives calls but does not send

my new centro seems to have a problem with set up.
now the unit receives calls but does not send ; does any one experienced a "se up" prolem?
Post relates to: Centro (AT&T)

If your are unable to send phone calls I would recommend that you contact your carrier about this. If you feel this is the device you can do a hard reset on it and before you sync try to place a phone call if that resolves the issue then go to your backup folder located here:
XP
C:\Program Files\Palm or Palm One\[hotsync username]\backup
C:\Palm\[hotsync username]\backup
C:\Program Files\Handspring\[hotsync username]\backup
[Palm Desktop 6.2 only] My Documents\Palm OS Desktop\[hotsync username]\backup
Vista
Start-->Documents\Palm OS Desktop\[hotsync username]\backup
Mac
Macintosh HD : Applications : Palm : (Palm username) : Backup
Macintosh HD : Users : (Mac username) : Documents : Palm : Users : (Palm username) : Backup
And rename the backup folder to backupOld. Then sync. If this does not resolve the issue you may need to call the carrier to be sure that your SIM card and device is setup correctly.

COMPUTER CRASHED, REINSTALLED; NOW THE SERIAL NUMBER I WAS ISSUED DOES NOT WORK

THE SERIAL NUMBER AND THE REDEMPTION CODE SHOW TO BE INVALID. I KNOW I REGISTERED AND RECEIVED A SERIAL NUMBER; HOWEVER MY ACCOUNT DOES NOT SHOW THAT I PURCHASED PHOTOSHOP ELEMENTS 11. HOW DO I RE-ACTIVATE THE SOFTWARE.

Details. OS, Product?

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview shows the contents, I can't open the document (Powerpoint) and I can't move the document. I tried "Copy" and paste but it doesn't work. I tried "Share" with Airdrop and iChat, but the file is inaccessible. When i try to rename the file, it says the filename is too long.
When I try to open it, it says the alias is not good, and asks if I want to fix the alias. I'm afraid to do that and lose all access to this document.
Right now, it feels like a ghost document - it is on the computer intact, but it is in an undisclosed location and inaccessible.
Please help!!

I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
I was afraid of rebooting and possibly losing track even of the ghost.
I did not try EasyFind - I'll keep that in mind next time.
Thanks for all the comments.

My Creative Cloud does not work anymore. When I try to reinstall it I receive the message "AAM cannot initialise". I have tried all the instructions but it still does not work. Robert

My Creative Cloud does not work anymore. When I try to reinstall it I receive the message "AAM cannot initialise". I have tried all the instructions but it still does not work. Robert

Try perform below steps.
Open task manager by pressing Ctrl + Shift + Esc keys. Click on more details if the option available.
Then end all Adobe related processes, including Creative Cloud and Coresync ( if running )
Then hold windows key on your keyboard and Press R key.
It will open Run window
In Run window, type Appdata and click on Ok
Open Local > Adobe folders
Delete AAMUpdater and OOBE folders
Then navigate to C:\Program Files (x86)\Common Files\Adobe
Delete Adobe Application Manager and OOBE folders
Go back to Program Files (x86) and Open Adobe folder
Try deleting Adobe Creative Cloud folder, if it is not allowing rename it to Adobe Creative Cloudold
Download and install Creative Cloud App from below link
https://creative.adobe.com/products/download/creative-cloud
Then check

CS4 Upgrade, the serial number you have entered does not match the product you have selected

I have a valid CS2 premium license and have installed CS4 upgrade to a new machine but get the dreaded error "the serial number you have entered does not match the product you have selected" Now I got this error when I originally installed in 2009, back then I could call customer service and get the problem resolved but now when I phone I get an automated message saying phone support is not available for CS4? Does anyone know of a work around or a UK number where I can get this resolved? Any help would be appreciated.

Please see: http://www.hp.com/country/us/en/mda/windows7/upgrade/index_ww.html to select your correct country or region.
Carey Frisch
Microsoft MVP
Windows Expert - Consumer

Messaging Server 4.1: Received mail is not returned to the sender if the receiving local account does not exist.

I have found that received mail is not returned to the sender if the receiving
local account does not exist. This problem occurs even if I use Console to
enable the Return message to sender option under the error handling methods.
In addition, I have used the configutil
to confirm that I have set the value
for Unknown account action to "13," which corresponds to the settings "Return
message to sender," "Notify the postmaster via email," and "Log the error in
the log file." Yet, in this situation, an error message is being sent to
postmaster, but not to the sender, and the error is not being recorded in the
log file.

Do the following steps: 

<OL>
<LI>From Console, open the appropriate Messaging Server.
<LI>Click the Configuration tab.
<LI>Open the Services folder.
<LI>Select SMTP.
<LI>Click the System tab.
</OL>

Check the "Domain handled by this server exclusively" field to make sure that
your mail domain is listed. If your mail domain is not listed, then Messaging
Server will assume that there is another mail server that is handling the
domain listed and will forward requests to this server.

For more information, please see the document Messaging Server
Administrator's Guide, Chapter 3, Configuring SMTP Services at 
http://docs.iplanet.com/docs/manuals/messaging/nms41/ag/smtp.htm#1010371

On Thu, 12 Dec 2013 16:16:02 +0000, lpphiggp wrote:
> I'm seeing this XTCOM error occur all over our /var/log/messages for one
> server, running SLES11sp2 / OES11/sp1;
>
> I don't really know what this is even for. We don't use NetStorage or
> iPrint even, this server only does basic NCP file serving, DHCP, and
> hosts a GroupWise PO.
> Is this anything to be concerned about?
If this:
http://www.linuxquestions.org/questi...entication-vs-
edirectory-825043/
is to be believed, it seems to indicate that your NAM configuration on
this server is not valid. I'm not seeing this message here on the OES
servers I looked at, and NAM is working correctly here.
David Gersic dgersic_@_niu.edu
Knowledge Partner http://forums.netiq.com
Please post questions in the forums. No support provided via email.
If you find this post helpful, please click on the star below.

My credit card has been charged for book, however my purchase history shows no record of the transaction and I have not received the book. The online problem reporting system does not have options to report this incident. Who can I cal

My credit card has been charged for book, however my purchase history shows no record of the transaction and I have not received the book. The online problem reporting system does not have options to report this incident. Who can I call?

Would be problems with purchases, billing, and redemption option. It's not 100% exact to your issue, but it will get you to the right department.
Go here https://expresslane.apple.com/GetproductgroupList.do then select ITunes, then Store, then Purchases, Billing, and Redemption. Then.. probably pick "My topic is not listed."

I don't received codes and the magic wand of PS does not work

I don't received no codes, now I can't no use LR
the magic wand of PS does not work

We can't know. You have not provided any useful technical info about your system or other details. If you bought the photographer's bundle for Creative Cloud then there are no serial numbers. Refer to this:
Sign in, activation, or connection errors | CS5.5 and later
Mylenium

How to set the number of averages for doing octave analysis

Hi
I am using a 4472 DAQ for continuously acquiring time domain signal and doing octave band analysis using Sound and vibration tool kit. How can we set the number of averages while doing the Octave analysis. All the other FFT vi like FRF, Auto Spectrum, Cross Spectrum have an option for setting the number of averages and then the vi runs for those many averages and it stops. How this same logic can be applied while doing octave analysis.
Regards,
Ankit

Hi Ankit,
You may want to consider using the VI in a for loop. By wiring the "number of averages you wish to complete" to the count terminal ("N'), you can control how many times the VI runs.
Hope this helps,
Jennifer O.

HT1689 I live 7 months in Germany and 5 months in the USA. My iTunesaccount does not work in the US even though I changed the country or entered a new account number. Who can help?

I live 7 months in Germany and 5 months in the USA. My iTunesaccount does not work in the US even though I changed the country or entered a new account number. Who can help?

You need 2 apple ids and you have to sign in and out with the two ids.
Note: Apple ID cannot be merged or transferred to another Apple ID.
Or only use one apple id in one country.

When i put in it the sim card and then turn the iphone the home page of iphone does not come and message come told me invalid sim or iphone is lock but my sim card is not invalid

When i put in it the sim card and then turn the iphone the home page of iphone does not come and message come told me invalid sim or iphone is lock but my sim card is not invalid and my iphone is work with all network in sweden

That usually means your phone is locked to a different phone carrier than the one you're trying to use.
YOu would need to conact the carrier the phone is locked to and see if they can unlock it for you. ONly the carrier that the phone is locked to is authorized to unlock it.

User Executes Stored Procedure That Executes sp_send_dbmail; receives email but also gets error Cannot alter the queue 'ExternalMailQueue', because it does not exist or you do not have permission.

Using SQL Server 2012 SP1
I have a user that is submitting a procedure that uses sp_send_dbmail. I have also noticed that they have the following code in their procedure
DECLARE @rc INT
IF NOT EXISTS (SELECT * FROM msdb.sys.service_queues
WHERE name = N'ExternalMailQueue' AND is_receive_enabled = 1)
EXEC @rc = msdb.dbo.sysmail_start_sp
The user submits the procedure and she gets the email but she also gets the following error message:
Msg 15151, Level 16, State 1, Procedure sysmail_start_sp, Line 8
Cannot alter the queue 'ExternalMailQueue', because it does not exist or you do not have permission.
Mail (Id: 2402) queued.
(1 row(s) affected)
I have granted execute to sp_send_dbmail and sysmail_start_sp. I have also granted select to service_queues.
Does anyone have any solutions for the above error message?
lcerni

The contents of sysmail_start_sp is this:
CREATE PROCEDURE sysmail_start_sp
AS
SET NOCOUNT ON
DECLARE @rc INT
   DECLARE @localmessage nvarchar(255)
ALTER QUEUE ExternalMailQueue WITH STATUS = ON
SELECT @rc = @@ERROR
IF(@rc = 0)
BEGIN
ALTER QUEUE ExternalMailQueue WITH ACTIVATION (STATUS = ON);
   SET @localmessage = FORMATMESSAGE(14639, SUSER_SNAME())
   exec msdb.dbo.sysmail_logmailevent_sp @event_type=1, @description=@localmessage
END
RETURN @rc
The user get the error, because she does not have any permission on the queue in question. To be able to alter the queue, the following applies according to Books Online:
Permission for altering a queue defaults to the owner of the queue, members of the db_ddladmin or db_owner fixed database roles, and members of the sysadmin fixed server role.
Note that is would be db_ddladmin or db_owner in msdb. Now, supposedly the queue is already active, and in that case I think that it is sufficient that the user has VIEW DEFINITION on the view. This would permit her to see the row in sys.service_queues,
why there would be no need to call sysmail_start_sp.
Altertanively, change the check to:
DECLARE @isenabled bit
SELECT @isenabled = (SELECT is_receive_enabled FROM msdb.sys.service_queues
               WHERE name = N'ExternalMailQueue')
IF @isenabled = 0
   EXEC @rc = msdb.dbo.sysmail_start_sp
The idea here is that, if the user has no permission to read the information in the DMV, @isenabled will be NULL, and you just pray and hope that the queue is up and running.
I suspect that the reason this worked for you on SQL 2005 is that on that instance someone at some point in made all the required configurations for it to work, but all that is forgotten now. That happens to me too.
If you really want the user to be able to start the queue, I have some better ideas than adding her to a role, but I skip the details for now.
Erland Sommarskog, SQL Server MVP, [email protected]

RF_BELEG GMR, number range interval 51 does not exist FBN1 Message no. NR75

HI ALL
IAM GETTING THIS MESSAGE WHILE POSTING MIGO
For object RF_BELEG GMR, number range interval 51 does not exist FBN1
Message no. NR751
Diagnosis
The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
Procedure
Create the missing number range interval in customizing.
Transaction code: FBN1
Regards,
parameshwar

Hi,
check following link
[problems in goods receive t.code MIGO;
Regards
Kailas Ugale

Invalid aggregation:( The number received in BW does not tally

Similar Messages

Maybe you are looking for