Invalid configuration for instance svc:/network

My system wont boot...
Connected via serial port.....
and rebooted.....the following output displayed....
Rebooting with command: boot
Boot device: disk File and args:
SunOS Release 5.10 Version Generic_118833-36 64-bit
Copyright 1983-2006 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Hardware watchdog enabled
Hostname: rnd-6
Jan 25 22:20:56 /usr/lib/snmp/snmpdx: can't open the file
Jan 25 22:20:56 /usr/lib/snmp/snmpdx: can't open the file
checking ufs filesystems
/dev/rdsk/c1t0d0s5: is logging.
/dev/rdsk/c1t0d0s4: is logging.
rnd-6 console login: Jan 25 22:21:10 inetd[274]: Property 'name' of instance svc
:/network/cde-spc:default is missing, inconsistent or invalid
Jan 25 22:21:10 inetd[274]: Property 'proto' of instance svc:/network/cde-spc:de
fault is missing, inconsistent or invalid
Jan 25 22:21:10 inetd[274]: Invalid configuration for instance svc:/network/cde-
spc:default, placing in maintenance
Jan 25 22:25:57 rnd-6 iscsi: NOTICE: unrecognized ioctl 0x403
Jan 25 22:25:57 rnd-6 iscsi: NOTICE: unrecognized ioctl 0x42a
Jan 25 22:25:57 rnd-6 iscsi: NOTICE: unrecognized ioctl 0x401
Jan 25 22:25:58 rnd-6 ipf: NOTICE: Unknown: cmd 0x403 data ffbfc994
Jan 25 22:25:58 rnd-6 ipf: NOTICE: Unknown: cmd 0x42a data ffbfc980
Jan 25 22:25:58 rnd-6 ipf: NOTICE: Unknown: cmd 0x401 data ffbfc954
.....and just hangs there....cant even get a login prompt...
Please assist
PS. its a V245 sparc running Solaris 10

This is a SMF message, might be cause by a problem that occured with a patch that was installed. These services are not related to SWUP. I recommend redirecting the question to the Solaris support forum http://forum.sun.com/category.jspa?categoryID=5
Kayo Granillo

Similar Messages

Error: Invalid configuration for the JMS adapter

Hi!
I'm doing a test with CEP to get messages from a JMS WebLogic queue but I'm getting the following error:
<BEA-2045010> <The application context "Teste" could not be initialized: org.springframework.beans.FatalBeanException: Error in initialization context lifecycle; nested exception is java.lang.IllegalArgumentException: Invalid configuration for the JMS adapter, you must Bean or specify a converter or a type of event.
Teste.context.xml:
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:osgi="http://www.springframework.org/schema/osgi"
xmlns:wlevs="http://www.bea.com/ns/wlevs/spring"
xmlns:jdbc="http://www.oracle.com/ns/ocep/jdbc"
xmlns:spatial="http://www.oracle.com/ns/ocep/spatial"
xsi:schemaLocation="
http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans.xsd
http://www.springframework.org/schema/osgi
http://www.springframework.org/schema/osgi/spring-osgi.xsd
http://www.bea.com/ns/wlevs/spring
http://www.bea.com/ns/wlevs/spring/spring-wlevs-v11_1_1_3.xsd
http://www.oracle.com/ns/ocep/jdbc
http://www.oracle.com/ns/ocep/jdbc/ocep-jdbc.xsd
http://www.oracle.com/ns/ocep/spatial
http://www.oracle.com/ns/ocep/spatial/ocep-spatial.xsd">
     <wlevs:event-type-repository>
          <wlevs:event-type type-name="Pet">
               <wlevs:class>testewithprotobuf.MyPet$Pet</wlevs:class>
          </wlevs:event-type>
     </wlevs:event-type-repository>
     <wlevs:adapter id="pet_messageAdapter" provider="jms-inbound">
          <wlevs:listener ref="pet_inputChannel" />
          <wlevs:instance-property name="converterBean"
               ref="PetMessageConverter" />
     </wlevs:adapter>
     <wlevs:channel id="pet_inputChannel" event-type="Pet">
          <wlevs:listener ref="pet_messageProcessor" />
     </wlevs:channel>
     <bean id="PetMessageConverter" class="testewithprotobuf.PetMessageConverter" />
     <bean id="PetBean" class="testewithprotobuf.PetBean" />
     <wlevs:processor id="pet_messageProcessor">
          <wlevs:listener ref="pet_outputChannel" />
     </wlevs:processor>
     <wlevs:channel id="pet_outputChannel" event-type="Pet">
          <wlevs:listener ref="PetBean" />
     </wlevs:channel>
</beans>
My converter class:
import java.util.Collections;
import java.util.List;
import javax.jms.BytesMessage;
import javax.jms.JMSException;
import javax.jms.Message;
import testewithprotobuf.MyPet.Pet;
import com.bea.wlevs.adapters.jms.api.InboundMessageConverter;
import com.bea.wlevs.adapters.jms.api.MessageConverterException;
import com.google.protobuf.InvalidProtocolBufferException;
public class PetMessageConverter implements InboundMessageConverter {
     @SuppressWarnings("rawtypes")
     @Override
     public List convert(Message message) throws MessageConverterException,
                                                            JMSException {
          BytesMessage bytesMessage = (BytesMessage) message;
          long bodyLen = bytesMessage.getBodyLength();
          byte[] buffer = new byte[(int) bodyLen];
          bytesMessage.readBytes(buffer);
          try {
               Pet pet = Pet.parseFrom(buffer);
               return Collections.singletonList(pet);
          } catch (InvalidProtocolBufferException e) {
               throw new MessageConverterException(e);
Please, what's wrong?
Thanks!

This error usually indicates that you have both event type and converter bean specified or neither specified. In your case, that doesn't appear to the case from looking at the spring file. Could you also paste the contents of your configuration file from META-INF/wlevs directory?

Invalid configuration for device 3

Hi all,
I have set up a nested lab with three esxi hosts and two datastores connected with Microsoft iscsi target server. I know nested vm's are not supported but I am trying to set up this lab because I am supporting a real VMware environment and I would like to be able to test certain things before I break anything so it is important. I get this error when trying to create a VM "invalid configuration for device 3". Anyone know how I can find out where the problem is?
Thanks

Please provide some more details about the environment, i.e. nested on what (VMware Workstation, ESXi, ...) Which version (host OS, guest OS, Hypervisors) do you use? How did you configure networking for the nested hosts (stanard vSwitch, Distributed switches)? What may help are the configuration (.vmx) files for the nested ESXi hosts, so please attach them to a reply post.
André
Note: Discussion moved from vSphere Newbie to Nested Virtualization

Invalid configuration for catalog/Web dispatcher (Fiori Smart Business Cockpit)

Hi all,
For our smart business cockpits, we have following issue in our administration (launchpad):
Invalid configuration for catalog/Web dispatcher
Title
SAP: KPI Catalog for SAP Smart Business
ID
X-SAP-REMOTE:SAP_KPIFRW_TC_R
Remote ID
HANA_CATALOG
System alias
HANA
Base URL
/sap/hba/apps/kpi/s/odata/hana_chip_catalog.xsodata/
Type
REMOTE
When I check our console client, the only error that we see is following message:
2014-08-04 14:33:16 Base URL '/sap/hba/apps/kpi/s/odata/hana_chip_catalog.xsodata' already registered - sap.ui2.srvc.Factory
Does someone already saw this issue before? I noticed that we only have those issues on REMOTE CATALOGS.
Thx!
Regards,
Hans
Tags edited by: Michael Appleby

Use SAP_KPIFRW_TC_R role (I think you already did).
(https://<WEBDISPhostname>:<port>/sap/bc/ui5_ui5/sap/arsrvc_upb_admn/main.html?sap-client=xxx&sap-language=EN#/Catalog/X-SAP-REMOTE:SAP_KPIFRW_TC_R)
However, to be able to access this catalog, the HANA user needs the role sap.hba.apps.kpi.s.roles::SAP_SMART_BUSINESS_RUNTIME
If the user has to model KPIs, they need sap.hba.apps.kpi.s.roles::SAP_SMART_BUSINESS_MODELER.
Regards,
Kiran

HT2404 my hard drive crashed and nothing recoverable. Apple installed a new drive. How can I go back and download the apps I had purchased for my previous configuration, for instance Lion 10.7, and Photoshop Elements 10?

My hard drive crashed and nothing recoverable, local Apple Store installed a new drive. How can I go back and download the apps I had purchased for my previous configuration, for instance Lion 10.7, and Photoshop Elements 10?

A blank drive needs to be formatted first, you do that hold c boot (or hold option key boot) from the 10.6 install disk (or Lion USB)
Read how to format the drive in Disk Utility here
https://discussions.apple.com/docs/DOC-3044
How to install OS X
https://discussions.apple.com/docs/DOC-3251
Software Update fully,
Hold the option key and click on Purchases when in MAS to download your 10.7 etc.

Airport keeps giving me the message that I entered an invalid password for my wireless network.

When I use network preferences to connect wirelessly to my wifi home network and enter the correct password that works on my iPad and other computers, I keep getting the message that I entered an invalid password. I have checked my keychain and made certain the correct password in saved there. Any suggestions?

It is asking for your security phrase not the router's password, in case you are entering the wrong password. If you are sure you are entering the correct phrase, you can reset your router to factory defaults then set up your security again.

Network device configuration for SCOM 2012 Network Resource Pool

We are planning for two management servers in a Network Resource Pool.
So(considering failover situation) to send traps to both devices do we need to configure both management servers as SNMP servers on these devices?
If yes, Then it will definitely need double traffic for sending traps to two devices, isn’t it?
What SNMP server name we should use while configuring devices?
Thanks,
Vinayak

Hi,
>So(considering failover situation) to send traps to both devices do we need to configure both management servers as SNMP servers on these devices?
Yes, you need to configure both management servers as a trap recievers.
>If yes, Then it will definitely need double traffic for sending traps to two devices, isn’t it?
That's right.
http://OpsMgr.ru/

Configuration for public & private network

I am working on two Separated networks and different ip range, one of the Internet, second only to traffic between the editing workstation has tried to get the open directory path to a second network and here I am having some problems, such as that clients get their problems when login network accounts and the problem of the DNS, How can we bypass this problem??
Please help

Dear Mr.
We highly thank your rapid response...
Iam Morad Shalbak head of post production department in Palmedia company in Palestine, Our main stream work is video editing and post production films, we handle our edit using FCP program, my department use MAC PRO and IMAC computers.
Our Problems located in the server and in the client, we have 2 ethrnet, 1GB network, on 2 separate switchers, diffierent IP range, what iam looking for is to set the primery eathrnet port on the server and client MAC PRO, only for internet traficing usage, the secondery port use for open directory traffic and file share traffice.
To let you know i had these problems during installing the previous idea, first the open directory cant locate a clear path on the secondery eathernet port, since the open directory takes 2 IP (public IP and Private IP) in same time, second the client cant access the net work account, also the client cant see the server DNS.
I will attache an discreption drew concerning my OPEN DIRECTORY on MY SERVER.
Regards,

?? WHAT IS SIMPLEST G4 OS 10 HARDWARE CONFIGURATION FOR A LOCAL NETWORK ??

I want to local network my 3 G4 Macs so I can transfer files like with FIREWIRE;
?? What is the most BASIC REFERENCE for doing this outside of Firewire,
(rather than various opinions) ??
I will appreciate any REFERENCES.
Thanks, Ken

Hi Ken,
Pretty simple, take a gander at this, then come back with questions if you have them...
http://support.apple.com/kb/HT1433

Script to fix invalid characters for SharePoint synced share

I'm hoping for some help implementing a script that will rename files with characters that are invalid for SharePoint, in a synced file share that is accessed by everyone at an office.
Some background: I'm working for a small nonprofit that has a SBS 2012 server and a local domain with about 30 users. I'm the sole volunteer IT person here. We have a network file share on the server that everyone stores their documents on. Recently,
we signed up with Office 365 Online and I set up a SharePoint library and synced it with the document share on our server. A few files aren't being uploaded, though, because of invalid characters (For instance, a file like "Outline/Team plan #3.doc"
Expecting everyone to remember not to use any of the invalid characters isn't really a solution, particularly since I'm not here full-time if things go wrong. I'm looking for a script to run on the server every few minutes that will rename any incompatible
files so that they can be uploaded to SharePoint. Personally, I think it's just plain criminal that Microsoft hasn't provided this functionality itself (it's the least they could do) but that's another rant for another time. Unfortunately, while
I do have a couple of years of experience with basic server administration and group policy, I'm not experienced at all when it comes to PowerShell scripting. I can string together some command line commands in a batch file, and that's about it.
I did find this promising post here:
http://community.spiceworks.com/scripts/show/2097-fix-file-names-for-skydrive-pro-syncing
I was hoping for opinions - is this the sort of thing I'm looking for, and what would be the best way to implement it (eg, every few minutes as a scheduled event)? Also, is this a straight-up powershell script, or are there additional languages/resources
involved? (Like I said, I'm sort of a script newbie).
Additional background: I posted a similar question asking if it could be done with GPOs, and they directed me here, suggesting it could be done with scripts.
Thanks!!

That script that Mike linked to is a good one, i've used it myself a fair few times. Just to weigh in with a bit of information on why those characters are forbidden:
The reason that some characters aren't allowed is that those characters are used as special characters in URLs. If you were to allow them to go into the file names (without 'escaping' them) then all the traffic to and from SharePoint would start to
go horribly wrong.
Now it is theoretically possible to build a tool that recognises the characters, escapes them, then uploads them. As well as updating the SharePoint interface to 'unescape' the characters when it renders them. However it's not a trivial bit of engineering,
you'd have to gut SharePoint and re-do some of the core behaviour. You've then got to re-test it and make sure it doesn't break any previous SharePoint behaviour.
The way MS want you to work is to save the files directly to SharePoint, which would pick up that you have protected characters and prompt the user to correct them. That does break down a bit with OneDrive as you can use the characters locally, it's only
the next step that fails...

Error in production order at saveConfiguration for instance 000000000000000

Hi pp friends,
I am getting an error at save ''Configuration for instance 000000000000000000 was not found'' in CO01 while creating a production order for a material variant . If i am forcefully saving a runtime error is coming..
But when i create a planned order and then i converted to production order for the same material variant this error is not coming.
kindly suggest.
regds

Hi Jurgen,
As such no Control cycle is exsing for this combination. We are in an Upgrade Project from ECC 5.0 to 6.0 . I am wondering, how this is working in ECC 5.0 with out control cycle as well. Will there be any other possibility
Thank you,
Regards,
Ramakrishna

Apple Configurator: The configuration for your iPad could not be downloaded from organisation . Invalid Profile.

Good afternoon,
I am really struggling with a deployment of 10 iPad Minis.
The iPads are brand new and I have downloaded and installed Apple Configurator onto our Apple Air laptop.
I have configured Apple Configurator in the following way:
Under Prepared:
Settings
Name is ticked with 'Number sequentially starting at 1'.
Supervision is ticked to on, Allow devices to connect to other Macs is also ticked.
Update iOS is set to "When update is available". Erase before installing is ticked.
Restore is set to "Don't restore backup".
No profiles are listed in the profiles section.
Apps
I have copied in some appropriate apps.
Setup
Skip: Restore, Passcode, Siri, Touch ID, Apple Pay, App Analytics all ticked.
I have not configured Device Enrollment.
In "Configure Settings..." Device Enrollment is not configured.
After preparing my iPads, they all connect and prepare correctly. When I select any iPad and unlock it, the following happens:
Hello, slide to setup
Select language, UK selected
Select Your Country or Region, UK selected
Choose a Wi-Fi Network, correct network selected and authenticated
Location Services: Enabled
Configuration, "<organisation> can automatically configure your iPad". Apply Configuration or Skip Configuration. Apply selected.
Configuration, "The configuration for your iPad could not be downloaded from <organisation>. Invalid Profile.
Apple Configurator is showing no errors, have tried Supervise>Reset, makes no difference.
Have skipped configuration and erased iPad before trying again, same problem.
Any suggestions would be really appreciated.

FYI - This is an iPad user to user forum. Apple doesn't read the forum posts.
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
 Cheers, Tom

A wallet needs to be configured for this instance of Application Express

hi
I m very new to APEX. I could create web service client with wsdl. But when service is on https i get message
"a wallet needs to be configured for this instance of Application Express".
I have created wallet using OWM (10.2.0.1.0) at location c:\del_sometime
Using admin i configured APEX instance settings wallet as
Wallet Path = file:c:\del_sometime
And checked in database too
SQL> ALTER SESSION SET CURRENT_SCHEMA = APEX_030200;
Session altered.
SQL> SELECT
2 APEX_INSTANCE_ADMIN.GET_PARAMETER('WALLET_PATH')
3 from dual;
APEX_INSTANCE_ADMIN.GET_PARAMETER('WALLET_PATH')
file:c:\del_sometime
Any idea whats wrong? I am following steps from http://download.oracle.com/docs/cd/E14373_01/admin.32/e13371/adm_wrkspc.htm#BABFBJEA

also whe I try following i keep getting error failure to open file. I am on XP and file is present with proper permissions.
SQL> SELECT utl_http.request('https://support.oracle.com/',null,'file:c:\del_sometime\') from dual;
SELECT utl_http.request('https://support.oracle.com/',null,'file:c:\del_sometime\') from dual
ERROR at line 1:
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1577
ORA-28759: failure to open file
ORA-06512: at line 1

Hello! Could you tell me which configuration is the best for graphic works, like making large POSTERS or BANNERS (for instance 2800X500 cm)???

Hello! Could you tell me which configuration is the best for graphic works, like making large POSTERS or BANNERS (for instance 2800X500 cm)???

scorpiorey wrote:
I just create file and send it to printer-house.
Never done that size files (posters) before, so, didn't know it would be such problem.
Model Name:          MacBook Pro
Model Identifier:          MacBookPro8,1
Processor Name:          Intel Core i7
Processor Speed:          2.8 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache (per Core):          256 KB
L3 Cache:          4 MB
Memory:          4 GB
Boot ROM Version:          MBP81.0047.B24
SMC Version (system):          1.68f98
this is what i have. now i know that it's not enough
If that's what you're using and it actually works, albeit slowly, I'd suggest taking The hatter's advice and go with the 6 core Mac Pro with 24GB of RAM and the 5870 video card. The RAM could come from here: http://eshop.macsales.com/shop/memory/Mac-Pro-Memory#1333-memory

HT200241 Can Apple Configurator deploy and modify Apple TV iOS 6.0 settings? For instance, what if I wanted to submit a 'reset all settings' command, but not a 'factory restore'?

Can Apple Configurator deploy and modify Apple TV iOS 6.0 settings? For instance, what if I wanted to submit a 'reset all settings' command, but not a 'factory restore'?

Did you follow the instructions here:
http://support.apple.com/kb/HT4367
Pay attention to differences in power connection depending on whether or not you have AppleTV2 or AppleTV 3.
Also some microUSB leads don't seem to work - try another if you can. Disconnect superfluous USB device/hubs too if possible.
AC

Invalid configuration for instance svc:/network

Similar Messages

Maybe you are looking for