Invalid group used for source specific multicast

Is there a difference between the commands ipv6 pim accept-register list <ACL>
VS ipv6 pim ssm range <ACL>? If so, what is it?
Thank you in advance

Hi Forrest,
These two commands serve a completely different purpose and are used in different multicast mode (ASM vs SSM).
"ipv6 pim accept-register list" is configured on the RP and dictates which first hop routers are allowed to send register messages to the RP. It is used in any source multicast (ASM) mode.
"ipv6 pim ssm range" is used to change the default source specific multicast (SSM) group range.
Regards

Similar Messages

Invalid character value for cast specification using SSIS? Please assist

SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft
SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "Invalid character value for cast specification". There was an error with input column "INV_DT" (627) on input "OLE DB Destination Input" (332). The column status
returned was: "The value could not be converted because of a potential loss of data.". SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "OLE DB Destination Input" (332)" failed because error code 0xC0209077 occurred,
and the error row disposition on "input "OLE DB Destination Input" (332)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information
about the failure. SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "OLE DB Destination" (319) failed with error code 0xC0209029 while processing input "OLE DB Destination Input" (332). The identified component
returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure. The attempt
to add a row to the Data Flow task buffer failed with error code 0xC0047020. SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "OLE DB Source" (1) returned error code 0xC02020C4. The component returned a failure code when
the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.

Hi Jony2422,
From the error message, we can infer the issue is caused by the input column “INV_DT” cannot convert to the output column in OLE DB Destination.
Based on my research, the exactly cause is the data type of input column “INV_DT” can convert to the data type of corresponding output column, but the data in the input column “INV_DT” cannot convert to the data type of corresponding output column. We can
verify the issue in the Advanced Editor dialog box of OLE DB Destination.
To avoid this issue, please make sure the input column can convert to the output column in OLE DB Destination, including the all the values in the input column. For more details, please refer to Visakh's suggestions.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

[Microsoft][ODBC SQL Server Driver]Invalid character value for cast specifi

[Microsoft][ODBC SQL Server Driver]Invalid character value for cast specification
An you help me with this error?
This is the problemativ query:
Search QUERY : SELECT DISTINCT theK_files.fileid, theK_files.name, theK_files.t
itle, theK_files.description, theK_users1.name AS AuthorName, theK_users1.surn
ame AS AuthorSurname, [theK_file-extensions].name AS Extension, theK_files.publ
ished, theK_files.updated FROM theK_users INNER JOIN [theK_users-to-groups] ON
theK_users.userid = [theK_users-to-groups].userid INNER JOIN theK_usergroups
ON [theK_users-to-groups].groupid = theK_usergroups.groupid INNER JOIN [theK_g
roups-to-files] ON theK_usergroups.groupid = [theK_groups-to-files].groupid INN
ER JOIN theK_files ON [theK_groups-to-files].fileid = theK_files.fileid INNER
JOIN theK_users theK_users1 ON theK_files.authorid = theK_users1.userid INNER
JOIN [theK_file-extensions] ON theK_files.extensionid = [theK_file-extensions]
.extensionid WHERE theK_users.userid = '1' AND theK_files.extensionid = '1' AN
D ( theK_files.name LIKE '%a%' OR theK_users1.name LIKE '%a%' OR theK_files.de
scription LIKE '%a%' )

are these columns character/string/varchar:
theK_users.userid = '1'
theK_files.extensionid = '1'
if these are number columns, change them to
theK_users.userid = 1
theK_files.extensionid = 1
Jamie

Item category group used for scrap materials

hello gurus
Can u pls tell me what is the item category group used for scrap materials in the material master?
Thanks in advance
Warm Regards
Prashant.

Prashanth,
Item Category
Item Category used is IRVE or you can create your own Item caegory by clicking "New entries"
a. Schedule line is activated
b. Incompletion Procedure = 43 repair item
c. Screen Seq Group is mentione.
Item Category Group
There is no item category group existing. You can create your own item category group "SCRAP". you basically use "Tem category Group" along with Sales Document to determine item category
You need to create a ZSCR scrap material type and assign "SCRAP" item category group to material type
Assign Item categories
Carry out the Item category determination for Item Category Group.
Regards
Sathya

What is t-code SHD0's 'Variant Groups' used for?

hi all:
What is t-code SHD0's 'Variant Groups' used for?
It seems can't work,who can help me?
thanksss.

Variant groups
An extension of the standard variants is involved in the variant groups; the standard groups are often insufficient:
Different users (groups) should work with different variants;
Some users should be able to execute a transaction with different variants.
This is possible - in addition to the advantages that the standard variants offer - with variant groups:
Variants from variant groups are automatically applied, but only for users that are assigned to them.
A user can be assigned to several groups and can change the assignment.
The values of the groups are not applied in the batch input mode.
If a transaction is started with another transaction variant, the values are not additionally applied to a variant group.
How are the variant groups maintained?
You can enter the group names on the "Variant Group" tab and maintain variant groups with the "Create" or "Change" functions.
The group name must be in the "correct" namespace.
In addition, there are two Where-Used Lists:
Which users are assigned to the group,
For which transactions the group applies.
Which transaction variants belong to the groups?
The name of a transaction variant that is to belong to a group meets the following naming conventions:
<Name of variant group><name of transaction code>. Example: A transaction variant is to be created for the XYZ transaction that belongs to GROUP1. The name of the transaction variant is then GROUP1XYZ.
Due to this naming convention, the group name must be in the "correct" namespace.
Transaction variants that (randomly) meet this naming convention do not necessarily belong to a group. The group assignment is activated by
1. Creating a group
2. Assigning users to this group
A transaction variant that belongs to a group can also be used this way, like a transaction variant without a group.
How are the transaction variants that belong to a group maintained?
Transaction variants that belong to a group are maintained in the same way as all other transaction variants, they are distinguished using a naming convention (<name of variant group> <name of transaction codes>).
They can be maintained in the "transaction variants" tab or in the "variant groups" tab. If you maintain them in the "variant groups" tab, you must always enter the transaction code so that the name of the transaction variant can be determined.
Under what conditions is a variant from a group applied?
A variant from a group is applied if users are assigned.
(Only for the assigned users, all other users get the original transaction with a variant from a different group.)
It is NOT sufficient to
Create a group
Create a variant that satisfies the naming convention.
How do you assign users to groups?
You can assign users in the "variant groups" tab in the "user assignment".
Enter the user name.
The user is assigned to the group with the "assign" function, but they see original transaction(s) or the transactions with variants from another group as the proposal.
The assignment of users to the group is deleted using the "delete assignment" function.
The user is assigned to the group using the "Set Proposal" function and the relevant transactions are started for this user with the corresponding variants.
The proposal is canceled with the "Cancel Proposal" function, the assignment itself remains.
If you enter the user names generically (*), you receive a selection screen in which you can
Choose whether assignments or proposals are to be changed
Further restrict user names (the group in the "all users from group" option has nothing to do with the variant group, it concerns the "user group for authorization check" from the user master record (logon data)).
By choosing "Execute", you receive a list in which you can further restrict the user selection. The "Save" function saves the assignments for all selected users.
If you want to start the report in the background, you can choose if just the list should be outputted, or if the database changes should also be performed.
If a user is additionally also to be able to execute the original transaction, he must be assigned to the "empty group", the allocation takes place in the same way, in this case, nothing is simply entered in the group name field.
Regards,
Joy.

PI Cluster. Which Node is used for a specific msg.

Hi,
We are about to test our new PI cluster. Node1 and Node2.
From SAP R3 I now send 100 msg to Cluster PI (Node1 and Node2).
For a specific message I want to see which Node processed it.
Where can I see that ? (SXMB_MONI is and the "hop list" is not predictable....we tested that...)
Any Pointers ?
Br, Martin

Martin,
You can refer to below link for PDF file
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cefe0399-0701-0010-8d86-b6b31cc5a681
check page 32 section "HTTP Dispatching and Effects of Failures"
Gaurav Jain
Points if answer is helpful

Which table could i find 'Authorization Group' used for Material master?

Hi experts,
Is there any table available could i find all 'Authorization Group' list as used by material master data.
OR in SPRO, anywhere could i find 'Define authorization group' for material master data specific??
Thanks.

Hi
Authorization group in the material master are maintained at the material type level.
SPRO->IMG-> Logistics - General-> Material Master-> Basic Settings-> Material Types-> Define Attributes of Material Types
List of authorization roups can be found in table T134-Material Types
this filed is a free defined 4 charcter field.
Thanks & Regards
Kishore

Can teamcenter community be used for source control?

I have this new tool called teamcenter community and I'm trying to see how well it will work with source control for labview. I haven't learned how to use it fully yet, but when I try to open a vi get the error message:
The document could not be opened for editing. A windows SharePoint Services compatible application could not be found to edit the document.
I'm using 8.5. Is this a feature that was added to a more recent environment.
Is this feature a possiblity? So far I've been able to use it to manage file, but haven't had success with folders.

Steve:
Unfortunately, teamcenter isn't supported in LabVIEW (past or present). A full list of supported clients is located in this KB. While it may be possible to use other clients, there hasn't been any testing done with them, so they may very well not work with LabVIEW.
Caleb Harris
National Instruments | Mechanical Engineer | http://www.ni.com/support

What's the group used for when doing auth with LDAP?

I thought searching by user is enough, just as ldapsearch does, defining Base DN, user entry's object class, etc.
I saw in some examples, besides users, seems like something about group is also defined, such as group filter etc.
How are these parameters are used? Is search of groups preceding users?
Thank you!

I hear the Arch Linux Magazine could always use some contributions, if you're inclined towards that sort of thing. I've been wanting to write an article for a while, but I've not run into anything in my Arch experience so far that's really inspired an article out of me.

Material group Issue for Maintain specific EBP Purchasing org

Hi Grus
Can any one help me on this issue, is it possible to maintain some specific material group to one EBP purchasing org.
your answerer will be rewarded.
Thanks & Regards
Sada

Teja Provided some usfull document.
Thanks Teja
Sada

Norton security alert high memory use for a specific file shared by millions

current version microsoft xp. computer frequently goes into a scan type mode followed by a norton security alert high memory usage. causes major slowdown in system use

current version microsoft xp. computer frequently goes into a scan type mode followed by a norton security alert high memory usage. causes major slowdown in system use

I would like to know what application I should use for this specific job. I have 6 photos in Iphoto, and I would like to print them out on one piece of paper with the title and key words showing. Please help.

My objective is to print photos on on 8 1/2 x 11 sheets of paper (4 per page). I want to include the photo title and the photo key words.
I am not sure how to go about doing this.

In iPhoto, create an album with the images you want to print.
Once created, open the album and select all the images (type Command + A)
Go to the menu View and make sure Titles and Keywords are checked.
Go to the menu File > Print
Choose Contact Sheet
In the lower right corner press the customize button
In the next window that opens, at the bottom of the window change the column slider to "2"
You should be good to go. If OK, then press Print at the bottom right corner of the window.
MtD
Message was edited by: Meg The Dog to fix typo

Quality Mgt - can I create a new inspection type for source inspection

I want to create a new inspection type for surce inspection and I will assign it to Miscellaneous insp lot origin.
What is the application of vendor inspection lot origin ? Can be used for source inspection ?

HI,
For source inspection.
If existing insp types are not going to solve your purpose , you can create insp type & assign it to insp lot origin 01.
But before that , check whether you can use the existing insp type 01 / 0130.
You need to assign that inspection type in the Q-info record , in the source insp field of insp control.
Also go through the help tips provide by SAP
Inspection Type for Insp. Lot Origin (Source Inspection)
    Inspection type for the source inspection
Use
    If you enter an inspection type for inspection lot origin 01 in this field, you can create an inspection lot for the source inspection within the lead time before the (scheduled) delivery date.
Dependencies
    The inspection type must be active in the inspection setup (Quality Management view) of the material master.
    If a status profile is stored in the quality info record for the supply relationship, a goods receipt inspection takes place instead of a source inspection.
Regards
K.M.Arun

How to find a memory and CPU used by a specific concurrent program ?

Dear All ,
How to find a memory and CPU used by a specific concurrent program ?
Thanks.

Hi,
How to find a memory and CPU used by a specific concurrent program ?
Could you please let us can we get the
memory used for a specific concurrent request .
Please refer scripts available at:
Concurrent Manager and program related scripts
Queries : Concurrent Managers/Processes
Thanks &
Best Regards,

How do I setup multiple users to use one source but manage playlists separately? For example, play counts are specific to each user.

How do I setup multiple users to use one source but manage playlists separately? For example, play counts are specific to each user.

Hi,
Thank you for posting in Windows Server Forum.
Here adding to the words of “Tim”, a forwarder is a DNS server on a network used to forward DNS queries for external DNS names to DNS servers outside of that network. You can also forward queries according to specific domain names using conditional forwarders.
A DNS server on a network is designated as a forwarder by having the other DNS servers in the network forward the queries they cannot resolve locally to that DNS server. You can refer information regarding forwarders and how to configure from beneath link.
Understanding forwarders
http://technet.microsoft.com/en-us/library/cc782142(v=ws.10).aspx
Configure a DNS Server to Use Forwarders
http://technet.microsoft.com/en-us/library/cc754941.aspx
Hope it helps!
Regards.

Invalid group used for source specific multicast

Similar Messages

Maybe you are looking for