Invalid state when running first time after compile

Often I will compile a package body without errors.
The first time I run it, I will get the package is in an invalid state. The second time I run the package it will run fine.
What is going on?
Thanks,
goo

Hi,
Dose it happen always ? Check if any object is getting changed. Is your package doing any thing which might be altering any objects being used by the package.
thanks

Similar Messages

  • Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install.

    Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
    In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
    I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!

    We're sorry.
    We can't find the article you're looking for.
    Please return to the Apple Support homepage.
    Sigh.

  • I got CS4 software. When the first time i install, i chose the normal installation content. Then I found that there was no photoshop on the start menu. After that I try to put the disk into the notebook again and find that there is no photoshop listed on

    I got CS4 software. When the first time i install, i chose the normal installation content. Then I found that there was no photoshop on the start menu. After that I try to put the disk into the notebook again and find that there is no photoshop listed on the "installation list"

    download the cs4 design premium installation files and install ps using them,
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • LOG_FILE_NOT_FOUND when running cleaner manually after some data purge

    I hit LOG_FILE_NOT_FOUND error when running cleaner manually after some data purge, I searched the forum, found someone also faced the same issue before, but cannot find any clue on how to fix it. Below is the error trace and followed by our configurations
    Caused by: com.sleepycat.je.EnvironmentFailureException: (JE 4.1.6)
    Environment must be closed, caused by:
    com.sleepycat.je.EnvironmentFailureException: Environment invalid because of
    previous exception: (JE 4.1.6) /scratch/tie/thirdeye/index/data-store
    fetchTarget of 0x50f/0x3fb9dd6 parent IN=368491717 IN
    class=com.sleepycat.je.tree.IN lastFullVersion=0x510/0x2ca7d18
    parent.getDirty()=false state=0 LOG_FILE_NOT_FOUND: Log file missing, log is
    likely invalid. Environment is invalid and must be closed.
    at
    com.sleepycat.je.EnvironmentFailureException.wrapSelf(EnvironmentFailureExcept
    ion.java:196)
    at
    com.sleepycat.je.dbi.EnvironmentImpl.checkIfInvalid(EnvironmentImpl.java:1439)
    at com.sleepycat.je.Environment.checkEnv(Environment.java:2117)
    at com.sleepycat.je.Environment.checkpoint(Environment.java:1440)
    at
    com.oracle.thirdeye.datastore.DataStoreManager.clean(DataStoreManager.java:402
    at
    com.oracle.thirdeye.infostore.InfoStoreManager.clean(InfoStoreManager.java:301
    ... 11 more
    Caused by: com.sleepycat.je.EnvironmentFailureException: Environment invalid
    because of previous exception: (JE 4.1.10)
    /scratch/tie/thirdeye/index/data-store fetchTarget of 0x50f/0x3fb9dd6 parent
    IN=368491717 IN class=com.sleepycat.je.tree.IN
    lastFullVersion=0x510/0x2ca7d18 parent.getDirty()=false state=0
    LOG_FILE_NOT_FOUND: Log file missing, log is likely invalid. Environment is
    invalid and must be closed.
    at com.sleepycat.je.tree.IN.fetchTarget(IN.java:1332)
    at com.sleepycat.je.tree.IN.findParent(IN.java:2886)
    at com.sleepycat.je.tree.Tree.getParentINForChildIN(Tree.java:881)
    at com.sleepycat.je.tree.Tree.getParentINForChildIN(Tree.java:809)
    at
    com.sleepycat.je.cleaner.FileProcessor.findINInTree(FileProcessor.java:1152)
    at com.sleepycat.je.cleaner.FileProcessor.processIN(FileProcessor.java:1090)
    at
    com.sleepycat.je.cleaner.FileProcessor.processFile(FileProcessor.java:538)
    at com.sleepycat.je.cleaner.FileProcessor.doClean(FileProcessor.java:241)
    at com.sleepycat.je.cleaner.Cleaner.doClean(Cleaner.java:463)
    ------------Configurations-------------------------
    EnvironmentConfig.ENV_RUN_CLEANER -> false
    EnvironmentConfig.CHECKPOINTER_HIGH_PRIORITY -> true
    EnvironmentConfig.CLEANER_EXPUNGE -> false
    Any hints are appreciated. I'm also working for Oracle CDC, feel free to call me at 861065151679 or drop me an email at [email protected] so that we can talk more in detail
    Anfernee

    Anfernee, I will contact you via email.
    --mark                                                                                                                                                                                                                   

  • Why can't rotate first time after launch in iPhone?

    launch app -> rotate device -> view rotated ok.
    but
    rotate device -> launch app -> view not rotated.
    what's the reason?

    It can auto-rotate at the first time after launch now.
    The reason seems not be the interface builder. Previously, I compiled the app using SDK 2.0, while the iphone's OS is 3.0. Now it is OK, I compile using SDK 3.0.
    But there is another problem. I want to switch from a non-rotatable view to a rotatable view, and if the device is in landscape mode, I want the rotatable view auto rotate to landscape mode.
    Safari can do this. But I don't know how to implement this myself.
    I switch views in this way: [view1 removeFromSuperview], [window addSubview:view2];
    because I find shouldAutorotateToInterfaceOrientation is called when using addSubview.

  • Why does my iphone 3gs screen go white after it goes "to sleep" for the first time after turning it on?

    Why does my iphone 3gs screen go white after it goes "to sleep" for the first time after turning it on?
    The screen isn't broken because it works after i turn the device off and back on, but after it goes black once, it's only white again.
    But it takes the touches although it's only white, because I can answer my phone when I slide my finger on the bottom of the screen, eventhough there in not the button to see.
    This is so weird. I have already done everything I can think of that might help. But I cannot think of anything that might be causing it, because nothing has happened to the device.

    Let me know if I should start a new discussion instead of opening a new topic here.
    My wife's iPhone is the same vintage as mine 3Gs, but has never had the battery problem.  Its affliction instead is that it cannot detect WiFi networks unless it is quite close to the source.  Often, when my iPhone not only detects but shows a maximum cells connection with a network, hers cannot detect the network at all.  In contrast, her iPhone seems to detect ourcellular carrier just as well as mine does.
    Is there any help for this affliction?

  • When i first time switch on my new laptop macbook air i had french keyboard

    when i first time turn on my new macbook air i wrote my new passport. i wrote on qwerty keyboard but when i changed langues on french, i need writing everytime on "imagine french keyboard" but when i changed again langues ENGLISH this stay same...
    in my pasport is letter " m" but if i writing i need push " .etc... where i can change this?
    thx

    Yes. The external drive containing the files should also be attached to your computer, of course. As you are new to Mac the external volumes , when mounted will show up as an icon on the Desktop on the right hand side (under the Macintosh HD icon). You can double click that and a Finder window will open for you to browse the files contained. Leave that open to one side and have iTunes open just beside it. You can now drag the files from the external and drop them onto the Device of your choice as it appears in the iTunes side bar. The Device name (for example "So & so's iPod" will get a blueish window around it; a small green circle with a "+" sign will appear letting you know that all operation can be completed. Drop away! The files will go to the correct categorization in the iPod: audio to songs; videos to movies; podcasts to podcasts and so on.
    Go ahead and give it a try.

  • TS2518 My RAW (nikon .NEF) files changing to a dull, darker version of themselves after selecting them for the first time after import.

    My RAW (nikon .NEF) files are literally changing to a dull, darker version of themselves after selecting them for the first time after import. I.e. The correct photo (light/color/etc) seems to be there and then a second later the photo changes. It's almost like it's showing a quick enhanced version then back to basic raw image. Started within last two updates.
    Is there a fix or is this the straw that forces a switch to Lightroom?

    Just recall that Aperture (or any other 3rd party raw converter) has NO information about the JPEG preview and how it was made.  That information is camera-vendor proprietary.
    Also note that there are like 6 "picture styles" in camera and this change you're seeing is entirely dependent on how you have them set.  If you have your camera set to "vivid" or something you'll see more of a change than if your on-camera is set to "faithful."
    That said, people here ALSO complain that Aperture's initial renders are TOO vivid, the exact opposite of your complaint, so you can't please everybody (in some cases, it seems you can't please ANYBODY ;-)
    Aperture provides a starting point.  Again, if you don't like it, you can tell Aperture to go with a "punchier" interpretation at its first render.  In the import dialog, try setting Aperture to use the "auto enhance" preset which is built in.  Aperture will add a little vibrancy adjustment, and it will add a curve, which will greatly add punch to the image.  If you want adjustments in a different direction, you can create a preset and set it at import.
    The only thing Aperture CANNOT do is what you're asking, which is "take the JPEG that my camera vendor generates through some voodoo and try and render the raw file just like that."  It's, unfortunately, impossible to do.

  • Why the sound of my ipad3 gone suddenly,not first time after i update the software

    Why the sound of my ipad3 gone suddenly,not first time after i update the software

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Apps opening first time after restart crash but reopens ok

    Applications (Mail, Archive Utility, TextEdit and many misc ones) opening for the first time after a restart crash but then re-open ok.
    This repeats again after a restart.
    They all open ok on the second try.
    The same applications can open ok the first time after a restart but different ones then crash but open ok after a second try.
    I have not tried another account yet.
    Any ideas appreciated.
    Thanks ... Ken

    Thanks for the response.
    Start apps mostly from Overflow.
    Trashing Overflow prefs and Finder prefs did not help.
    Also Archive Utility SOMETIMES quits first time:
    /System/Library/CoreServices/Archive Utility.app
    Next time I will check the Console and post the contents.
    Thanks ... Ken

  • I am trying to run my registered CS6 Design Standard programs for the first time after install. InDesign runs OK, but Illustrator and Photoshop will only run in trail mode. How do I activate those two?

    I can't get my registered versions of CS6 Photoshop and Illustrator to run in full mode. I installed CS6 Design Standard online end of June (an upgrade from CS5.5), on my old MacBook Pro. I didn't run the programs then as I was waiting on arrival of new MacBook Pro. I migrated the programs from my old MacBook to the new, and today tried to run those programs for the first time. InDesign work OK (after an initial hiccup) but Illustrator and Photoshop will only run in trial mode, and won't let me save files. My CS6 Design Standard shows with it's registration in my Adobe Account. All seems in order, but Illustrator and Photoshop won't run in registered mode. Can you please help?

    Demons1 in the future please only migrate your documents and settings.
    Please use the uninstallers to remove your current installation.  They are located in the Applications/Utilities/Adobe Installers folder.  Once the uninstall is complete you will also want to run the CC Cleaner Tool.  You can find more details at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
    If you need to download a fresh copy of the installation files for Creative Suite 6 you can do so at Download CS6 products.

  • When I open FF4 for the first time after starting the computer it is very slow to load. From then on it loads normaly.

    I have an HP Pavilion DV9000.

    I had this problem too. Not just with FF 4 but also previous versions. For that and other reasons I decided to by an SSD and install windows and all the programs on there. That worked fine except for firefox. Boot time is much faster (2o secs) and programs (from the startup folder) are loaded almost immediately after the desktop comes up. However firefox still took 90 seconds to load. After some trial and error I disables in the registry prefetcher and superprefetch (I am running windows 7, no SP1). Then I restarted my computer twice. The first time firefox did not load any faster but at any subsequent startup firefox starts in a few seconds. In fact some times it is so fast it comes up before the wireless network connection is established. HTH
    HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control/SessionManager/MemoryManagement/PrefetchParamaters/EnablePrefetcher --> 0
    HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control/SessionManager/MemoryManagement/PrefetchParamaters/EnableSuperFetch --> 0

  • ITunes freezes computer when starting to run first time

    iTunes 7.0.x was working fine on my new Windows Vista computer. When I started it up today I got an message to upgrade to 7.1. I installed it and when running it it freezes my computer 3/4 of the "updating library" process. The whole computer slows down tremendously and then the screen turns black with just an arrow showing. I uninstalled and reinstalled and the same problem keeps happening. For a version which was supposed to correct Vista problems, it has broken something which was running fine before
    Dell   Other OS   Vista

    Hey
    iTunes currently does not support Vista. This article: http://docs.info.apple.com/article.html?artnum=305042 will give you more detailed information about Vista compatability and will be updated when Vista and iTunes are compatible.
    Jason

  • Package fails first time after changes

    Hi,
    I have a package that I am making changes to. I'm running the package via the SQL Plus Worksheet. After making the changes to the package and recompiling, I try to execute the program from SQL Plus Worksheet and get this error message:
    BEGIN xml_import_export_package2_NED.start_transfer(:v_error_no, :v_error_message,:v_error_procedure); END;
    ERROR at line 1:
    ORA-04068: existing state of packages has been discarded
    ORA-04061: existing state of package "AVENTISDM.XML_IMPORT_EXPORT_PACKAGE2_NED" has been invalidated
    ORA-04065: not executed, altered or dropped package "AVENTISDM.XML_IMPORT_EXPORT_PACKAGE2_NED"
    ORA-06508: PL/SQL: could not find program unit being called
    ORA-06512: at line 1
    The package does not run. However, when I execute it again it works fine. I'm now concerned that if I make a change to a package during the day, that is scheduled to run at night, that it will fail unless I run it once first.
    Is this behaviour by design?
    Regards,
    Ned

    This behaviour is by design, but it should not be a problem for your scheduled job.
    When you run the package in sqlplus, the package is loaded into SGA, and a pointer to this area is in your PGA. When you re-compile the package, the copy in SGA is invalidated. When you then try to re-run the package, the invalid pointer causes the error. Running it the second time causes a re-load of the package and the re-creation of the pointer. However, a new session (which your scheduled job would have) would not have the invalid pointer, so would work correctly.
    John

  • Error when running root.sh after 11.g2 standalone rac installation

    OS: redhat 5.8
    After completing the installation, when running root.sh , I get error:
    [root@vmorarac1 oracle]# ./root.sh
    Running Oracle 11g root.sh script...
    The following environment variables are set as:
    ORACLE_OWNER= oracle
    ORACLE_HOME= /u01/app/11.2/oracle
    Enter the full pathname of the local bin directory: [usr/local/bin]:
    The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n)
    [n]: y
    Copying dbhome to /usr/local/bin ...
    The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
    [n]: y
    Copying oraenv to /usr/local/bin ...
    The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
    [n]: y
    Copying coraenv to /usr/local/bin ...
    Entries will be added to the /etc/oratab file as needed by
    Database Configuration Assistant when a database is created
    Finished running generic part of root.sh script.
    Now product-specific root actions will be performed.
    Unrecognized character \x03 in column 3 at /u01/app/11.2/oracle/perl/lib/5.10.0/File/Basename.pm line 1.
    Compilation failed in require at /u01/app/11.2/oracle/crs/install/roothas.pl line 115.
    BEGIN failed--compilation aborted at /u01/app/11.2/oracle/crs/install/roothas.pl line 115.

    Based on error messages you are getting it narrows down to perl issue and invalid character present in perl script.
    Have you or someone modified the perl script? Usually it is required to modify the scripts to point toproper perl location. Sometimes when you modify the script, the text editors could insert some characters in wrong encoding, etc. So I suggest to do comparison to perl scripts from the nodes with the same psu levels where installation was sucessfull., just compare filesize and if its different, then you could possible copy right scripts over current ones.
    The GI installations are very hard to investigate remotely, there could be too many things that can be wrong, so oracle support is your friend.
    As general thing I always recommend to install latest PSU before root.sh script execution.
    Ed Rudans
    erudans.blogspot.com

Maybe you are looking for