Package fails first time after changes

Hi,
I have a package that I am making changes to. I'm running the package via the SQL Plus Worksheet. After making the changes to the package and recompiling, I try to execute the program from SQL Plus Worksheet and get this error message:
BEGIN xml_import_export_package2_NED.start_transfer(:v_error_no, :v_error_message,:v_error_procedure); END;
ERROR at line 1:
ORA-04068: existing state of packages has been discarded
ORA-04061: existing state of package "AVENTISDM.XML_IMPORT_EXPORT_PACKAGE2_NED" has been invalidated
ORA-04065: not executed, altered or dropped package "AVENTISDM.XML_IMPORT_EXPORT_PACKAGE2_NED"
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at line 1
The package does not run. However, when I execute it again it works fine. I'm now concerned that if I make a change to a package during the day, that is scheduled to run at night, that it will fail unless I run it once first.
Is this behaviour by design?
Regards,
Ned

This behaviour is by design, but it should not be a problem for your scheduled job.
When you run the package in sqlplus, the package is loaded into SGA, and a pointer to this area is in your PGA. When you re-compile the package, the copy in SGA is invalidated. When you then try to re-run the package, the invalid pointer causes the error. Running it the second time causes a re-load of the package and the re-creation of the pointer. However, a new session (which your scheduled job would have) would not have the invalid pointer, so would work correctly.
John

Similar Messages

SBS 2008 Standard - Windows Backup fails first time after every reboot

Backup runs successfully every night.
Once server is rebooted first backup fails, then subsequent backups succeed OK.
So much so that we run the backup manually and let it error (pretty much straight away) then let it run again successfully at 10pm.
Backs up to external hard drive on rotation.
I think it's a VSS issue - has anyone else had this? What did you do to resolve?
Thanks,
J.

Hi,
According to the Event ID 521, please refer to the following article. you will get detailed explains.
Event ID 521 — Backup Operations
http://technet.microsoft.com/en-us/library/cc734453(v=WS.10).aspx
Based on all error messages that you provided, it seems that backup issue caused by sqlwriter.exe. So, please
temporarily disable SQL Server related services and then check if this issue can be solved. It will help us to confirm if this issue was related to SQL Server.
Meanwhile, would you please let me know if you have installed available update rollup for your SBS 2008 Standard?
Hope this helps.
Best regards,
Justin Gu

TS2518 My RAW (nikon .NEF) files changing to a dull, darker version of themselves after selecting them for the first time after import.

My RAW (nikon .NEF) files are literally changing to a dull, darker version of themselves after selecting them for the first time after import. I.e. The correct photo (light/color/etc) seems to be there and then a second later the photo changes. It's almost like it's showing a quick enhanced version then back to basic raw image. Started within last two updates.
Is there a fix or is this the straw that forces a switch to Lightroom?

Just recall that Aperture (or any other 3rd party raw converter) has NO information about the JPEG preview and how it was made. That information is camera-vendor proprietary.
Also note that there are like 6 "picture styles" in camera and this change you're seeing is entirely dependent on how you have them set. If you have your camera set to "vivid" or something you'll see more of a change than if your on-camera is set to "faithful."
That said, people here ALSO complain that Aperture's initial renders are TOO vivid, the exact opposite of your complaint, so you can't please everybody (in some cases, it seems you can't please ANYBODY ;-)
Aperture provides a starting point. Again, if you don't like it, you can tell Aperture to go with a "punchier" interpretation at its first render. In the import dialog, try setting Aperture to use the "auto enhance" preset which is built in. Aperture will add a little vibrancy adjustment, and it will add a curve, which will greatly add punch to the image. If you want adjustments in a different direction, you can create a preset and set it at import.
The only thing Aperture CANNOT do is what you're asking, which is "take the JPEG that my camera vendor generates through some voodoo and try and render the raw file just like that." It's, unfortunately, impossible to do.

Some, but not all, podcasts existing on the iPod no longer appear in iTunes. Different podcasts have been affected at different times, after changes in the state of the iPod. Only podcasts are affected.

I have not seen this precise issue addressed anywhere. I don’t know if it’s an iTunes or an iPod problem:
- Some, but not all, podcasts existing on the iPod no longer appear in iTunes;
this, after normal behavior for more than a year since purchase of the iPod.
- Different podcasts have been affected at different times, after changes in the state of the iPod.
- Only podcasts are affected.
- This concerns an iPod nano 6th gen. and iTunes 11.0.2 (26) on System 10.6.8
- The only change to iTunes, the Mac, or the iPod is that just before this condition began
I’d begun syncing an iPhone via iTunes.
I sync manually (“manually manage music and videos”). The first time this happened, I wanted to delete seventeen podcast episodes (all belonging to one podcast) existing on the iPod — but they didn’t show up in iTunes. I tried re-downloading them and re-syncing, to see if the new versions would somehow “re-link” to iTunes. They didn’t. Only one — new — episode appeared in iTunes.
I ultimately reset the iPod and manually resynced all the podcasts I currently had on iTunes. That worked, though I had to painstakingly add in all the other content deleted by the reset.
So: after that reset and manual sync, all podcasts and episodes on the iPod were visible to iTunes and I was able to delete the podcast and its — now 18 — episodes I’d wanted to get rid of to begin with. But the next time I connected the iPod, only 8 podcast episodes out of 21 episodes total existing on the iPod were visible to iTunes. These are different podcasts; I’d deleted the original “invisible” ones.
By “visible,” I mean in the “Podcasts” list view under “[name]’s iPod” in the iTunes sidebar. If I select “[name]’s” iPod in the iTunes sidebar and the “Podcasts” tab, all podcasts and episodes are visible, though greyed out because I’m set to sync manually. It’s unclear to me if these are the podcasts on the iPod or those currently in iTunes, as they are currently the same. If I switch to syncing automatically, all content on the iPod will be lost again, so I’m not up to trying it at the moment.
As I said, this involves only podcasts. All other content on the iPod does appear in iTunes.

I have the same problem- i see my movies in the ipod section in itunes and they even show as mpeg4 in the 'kind' section but they dont have that small TV icon next to them. if i play these in itunes, they play fine- but try playing them on the ipod and all you hear is the sound and no picture. All videos that i manually transfer work fine in the beginning- its when i hook up the ipod to the comp again and start itunes- they start showing up without the 'tv' icon!! i have to again transfer them from the itunes library to activate them as videos.
Need Help!!!

Why does my iphone 3gs screen go white after it goes "to sleep" for the first time after turning it on?

Why does my iphone 3gs screen go white after it goes "to sleep" for the first time after turning it on?
The screen isn't broken because it works after i turn the device off and back on, but after it goes black once, it's only white again.
But it takes the touches although it's only white, because I can answer my phone when I slide my finger on the bottom of the screen, eventhough there in not the button to see.
This is so weird. I have already done everything I can think of that might help. But I cannot think of anything that might be causing it, because nothing has happened to the device.

Let me know if I should start a new discussion instead of opening a new topic here.
My wife's iPhone is the same vintage as mine 3Gs, but has never had the battery problem. Its affliction instead is that it cannot detect WiFi networks unless it is quite close to the source. Often, when my iPhone not only detects but shows a maximum cells connection with a network, hers cannot detect the network at all. In contrast, her iPhone seems to detect ourcellular carrier just as well as mine does.
Is there any help for this affliction?

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install.

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!

We're sorry.
We can't find the article you're looking for.
Please return to the Apple Support homepage.
Sigh.

Why can't rotate first time after launch in iPhone?

launch app -> rotate device -> view rotated ok.
but
rotate device -> launch app -> view not rotated.
what's the reason?

It can auto-rotate at the first time after launch now.
The reason seems not be the interface builder. Previously, I compiled the app using SDK 2.0, while the iphone's OS is 3.0. Now it is OK, I compile using SDK 3.0.
But there is another problem. I want to switch from a non-rotatable view to a rotatable view, and if the device is in landscape mode, I want the rotatable view auto rotate to landscape mode.
Safari can do this. But I don't know how to implement this myself.
I switch views in this way: [view1 removeFromSuperview], [window addSubview:view2];
because I find shouldAutorotateToInterfaceOrientation is called when using addSubview.

Updating Adobe Community Help files fails every time after starting

Hello,
I e.g. go to «Support Center for Photoshop» from the menu within the app. Adobe Community Help starts up and tells me theres new content, do I want to download that. It seems to start the dl just fine, then reports an error «16882» (if I'm remembering it right).
Why? We have very fast very broadband internet connection and I use a 2011 27" iMac with max Gig RAM installed.
Any hints there would be appreciated.
Thanks!

Thanks, Mister Kapoor,
that solved my problem!
All the best to you, sincerely,
Olaf Mueller
Mit freundlichen Grüssen,
Olaf Müller
COMPLOT AG Multimedia Project, Gerberngasse 44, Postfach, 3000 Bern 13
Tel. ++41 31.313 30 33
Fax ++41 31.313 30 39
[email protected]
http://www.complot.ch
THE ULTIMATE PARTNERS
- RITTER KREATIV
Unternehmensberatung+Kommunikation,
integrales Marketing, Werbung, Promotion, PR
- Complot AG Multimedia Project
Interactive Solutions, Internet, Intranet, E-Business, CD-ROM, DVD, Hosting
- FOTarena
Studio-Pool für Foto, Video, Bildbearbeitung
Am 24.04.2012 um 12:30 schrieb Arpit Kapoor:
Re: Updating Adobe Community Help files fails every time after starting
created by Arpit Kapoor in Downloading, Installing, Setting Up - View the full discussion
Seems Adobe Air or Cummunity help has gone cprrupt. Lets follow the below suggestions:
Step 1: Uninstall adobe air from Utilities and re-install the latest adobe AIR from "http://get.adobe.com/air/otherversions/"
Step 2: Follow "http://kb2.adobe.com/cps/842/cpsid_84215.html" and re-install the Community Help Air application.
Step 3: Restart the machine and launch adobe Community Help and try to install all the updates and check if it works fine.
Hope that Helps!.
Arpit
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4356729#4356729
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4356729#4356729. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Why the sound of my ipad3 gone suddenly,not first time after i update the software

Why the sound of my ipad3 gone suddenly,not first time after i update the software

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Apps opening first time after restart crash but reopens ok

Applications (Mail, Archive Utility, TextEdit and many misc ones) opening for the first time after a restart crash but then re-open ok.
This repeats again after a restart.
They all open ok on the second try.
The same applications can open ok the first time after a restart but different ones then crash but open ok after a second try.
I have not tried another account yet.
Any ideas appreciated.
Thanks ... Ken

Thanks for the response.
Start apps mostly from Overflow.
Trashing Overflow prefs and Finder prefs did not help.
Also Archive Utility SOMETIMES quits first time:
/System/Library/CoreServices/Archive Utility.app
Next time I will check the Console and post the contents.
Thanks ... Ken

Time machine would back up only the first time after I shut off my imac and started it up again. Then it would fail or claim it could not locate my external Hard Drive even though it's icon was showing in the time machine dialog window.

Time machine only ever backed up the first time it runs immediately after I start up my computer after it has been shut off. All other back up attemps fail. Recently it stopped recognizing the icon for my external hard drive in the time machine dialog window where you select the hard drive to back up to, and turn on and off the time machine function. Now the external HD icon only shows up on the desk top but no longer in the dialog box. I just tried shutting the computer off and turning it on again and now the light is on, on the external hard drive but the icon does not even appear on the desk top.
The external hard drive is a 1TB Seagate. The drive still has plenty of unused capacity. I ran a diagnostic test on it. It said the disk needed repair but the repair function would not work. The message stated that it could not be unmounted and repair is not available because the disk can't be written to. The Mac OX utility said the disk can still be opened but can't be changed nor repaired. The external HD is not S.M.A.R.T. supported.
I haven't tried replacing the cable yet. Is that the next thing I should try?

What Mac OSX version are your running ("iOS" as shown in your profile cannot run on a Mac computer)?

Wlconfig with custom role mapper always fails FIRST time only

WLS 8.1 sp2.
I have a very strange problem, where I'm "coldstarting" a server and
configuring it, much like the ant build script for medrec. Only I have a
custom role mapper (medrec has a custom authentication provider). Anyway,
the first time I execute this task (after a clean), it consistently fails
like so:
[wlconfig] OK
[wlconfig] OK
BUILD FAILED
file:P:/dgs/build.xml:186: Unable to create mbean:
weblogic.management.MBeanCreationException: - with nested exception:
[java.lang.ClassNotFoundException:
weblogic.management.configuration.com.combinenet.security.CNRoleMapperProvid
erMBean]
(that class looks bogus to me, BTW, as my provider class is
com.combinenet.security.CNRoleMapperProvider)
Now, the SECOND time I execute "coldstart", which runs wlconfig, the server
starts up fine, and my custom role mapper is loaded successfully. So,
obviously I figured something was left around the first time which somehow
helped matters, but the strange thing is that I delete the entire domain
directory before "coldstarting" the server, and I also re-copy the role
mapper provider jar into the mbeantypes directory, so I'm very puzzled. I'm
copying the coldstart task below (and the clean).
Can anyone tell me what's wrong with this task that would make it fail the
first time through after a clean? Is this a bug? And why would it succeed on
all subsequent attempts (without a clean)? I just don't see anything wrong
with what I'm doing.
TIA,
Miles
<target name="coldstart"
description="Start a new DGS Server with an empty config"
depends="configServerEnv,startPointBase,configPointBase,dist" >
<delete dir="${dgs.root}" quiet="true"/>
<mkdir dir="${dgs.root}"/>
<wlserver
beahome="${bea.home}"
dir="${dgs.root}"
domainname="${dgs.domain}"
host="${dgs.host}"
port="${dgs.port}"
servername="${dgs.serverName}"
username="${wl.username}"
password="${wl.password}"
productionmodeenabled="false"
generateconfig="true"
action="start">
</wlserver>
<wlconfig url="t3://${dgs.host}:${dgs.port}"
username="${wl.username}"
password="${wl.password}">
<query domain="${dgs.domain}" type="Server"
name="${dgs.serverName}"
property="dgs.server"/>
<create type="JDBCConnectionPool"
name="DgsPool"
property="dgs.pool">
<set attribute="CapacityIncrement" value="1"/>
<set attribute="DriverName"
value="com.pointbase.jdbc.jdbcUniversalDriver"/>
<set attribute="InitialCapacity" value="1"/>
<set attribute="MaxCapacity" value="10"/>
<set attribute="Password" value="${pointbase.password}"/>
<set attribute="Properties" value="user=${pointbase.username}"/>
<set attribute="RefreshMinutes" value="0"/>
<set attribute="ShrinkPeriodMinutes" value="15"/>
<set attribute="ShrinkingEnabled" value="true"/>
<set attribute="TestConnectionsOnRelease" value="false"/>
<set attribute="TestConnectionsOnReserve" value="false"/>
<set attribute="URL" value="jdbc:pointbase:server://localhost/demo"/>
<set attribute="Targets" value="${dgs.server}"/>
</create>
<create type="JDBCTxDataSource" name="DGS Tx DataSource">
<set attribute="JNDIName" value="DgsTxDataSource"/>
<set attribute="PoolName" value="DgsPool"/>
<set attribute="Targets" value="${dgs.server}"/>
</create>
<create type="JMSConnectionFactory" name="Queue">
<set attribute="JNDIName" value="jms/QueueConnectionFactory"/>
<set attribute="XAServerEnabled" value="true"/>
<set attribute="Targets" value="${dgs.server}"/>
</create>
<create type="JMSJDBCStore" name="DgsJDBCStore"
property="dgs.jdbcstore">
<set attribute="ConnectionPool" value="${dgs.pool}"/>
<set attribute="PrefixName" value="Dgs"/>
</create>
<create type="JMSServer" name="DgsJMSServer">
<set attribute="Store" value="${dgs.jdbcstore}"/>
<set attribute="Targets" value="${dgs.server}"/>
<create type="JMSQueue" name="Registration Queue">
<set attribute="JNDIName" value="jms/REGISTRATION_MDB_QUEUE"/>
</create>
</create>
<create type="MailSession" name="Dgs Mail Session">
<set attribute="JNDIName" value="mail/DgsMailSession"/>
<set attribute="Properties"
value="mail.user=joe;mail.host=mail.mycompany.com"/>
<set attribute="Targets" value="${dgs.server}"/>
</create>
<create type="StartupClass" name="StartBrowser">
<set attribute="Arguments" value="port=${dgs.port}"/>
<set attribute="ClassName" value="com.combinenet.test.StartBrowser"/>
<set attribute="FailureIsFatal" value="false"/>
<set attribute="Notes" value="Automatically starts a browser on
server boot."/>
<set attribute="Targets" value="${dgs.server}"/>
</create>
<set mbean="Security:Name=myrealmDefaultAuthenticator"
attribute="ControlFlag" value="SUFFICIENT"/>
<set mbean="Security:Name=myrealmDefaultAuthenticator"
attribute="MinimumPasswordLength" value="10"/>
<set mbean="Security:Name=myrealm"
attribute="DeployPolicyIgnored" value="false"/>
<set mbean="Security:Name=myrealm" attribute="DeployRoleIgnored"
value="false"/>
<set mbean="Security:Name=myrealm"
attribute="FullyDelegateAuthorization" value="true"/>
<set mbean="Security:Name=myrealm"
attribute="AuthenticationProviders"
value="Security:Name=myrealmDefaultAuthenticator|Security:Name=myrealmDefaul
tIdentityAsserter"/>
<set mbean="Security:Name=myrealm" attribute="RoleMappers"
value="Security:Name=myrealmDefaultRoleMapper|Security:Name=myrealmCNRoleMap
perProvider"/>
<create type="com.combinenet.security.CNRoleMapperProvider"
domain="Security" name="myrealmCNRoleMapperProvider"/>
<set mbean="Security:Name=myrealmCNRoleMapperProvider"
attribute="Realm" value="Security:Name=myrealm"/>
<query domain="${dgs.domain}" type="Server" name="DgsServer">
<set attribute="StdoutEnabled" value="true"/>
<set attribute="StdoutSeverityLevel" value="64"/>
<set attribute="ListenAddress" value=""/>
<set attribute="ListenPort" value="${dgs.port}"/>
</query>
<query domain="${dgs.domain}" type="WebServer" name="DgsServer">
<set attribute="LogFileName" value="logs/access.log"/>
</query>
</wlconfig>
<copy file="${dist}/lib/dgs.ear" todir="${dgs.root}"/>
<wldeploy action="deploy"
source="${dgs.root}/dgs.ear"
name="dgsapp"
user="${wl.username}"
password="${wl.password}"
verbose="true"
adminurl="t3://localhost:7001"
debug="true"
targets="${dgs.serverName}"/>

<sleep hours="10"/>
</target>
<target name="clean"
description="Clean the build tree(s)"
depends="init">
<delete dir="${build}" verbose="true"/>
<delete dir="${dist}" verbose="true"/> (dist is where the ear file is
created)
</target>

g_wolfman wrote:
Are you using Parallels?
Wolfman, thats a good hint!
Additional info at --> http://reviews.cnet.com/8301-13727_7-20106682-263/macbook-airs-double-booting-wi th-parallels-and-filevault-enabled/
Thanks for the input.
Lupunus

Lion - startup fails first time, second time fine

So here's a weird issue… it started a week ago, every time I shut my Mac down and start, the first time it tries to start fails. I have FileVault enabled, so I enter my password, the grey screen appears, the wheel under the Apple logo starts spinning and after a while it just restarts. I enter my password again and it boots just fine.
But only the second time.
I tried verbose boot to see what's going on, but I don't really understand much of what it says. I took some pictures, I don't know if there's a startup log somewhere.
http://cl.ly/3J103V1q112h1L1Q3n3K
http://cl.ly/2n0Y3B1e0P382k1r3W2q
I just don't understand it, because the second time it always boots with no problem, but the first time the above happens. I unfortunately can't take it to a genius bar as there is no Apple Store in Brazil and my Portuguese isn't good enough to explain that to someone.

g_wolfman wrote:
Are you using Parallels?
Wolfman, thats a good hint!
Additional info at --> http://reviews.cnet.com/8301-13727_7-20106682-263/macbook-airs-double-booting-wi th-parallels-and-filevault-enabled/
Thanks for the input.
Lupunus

Client trust fails 1st time, after two refreshes succeeds

For some reason this year after installing NW6.5 SP7, my BM 3.9 server seems to be failing to authenticate via the Client Trust the first time someone tries to open a web browser.
If the end-users click refresh in the browser two or three times, the trust authentication then succeeds and all is well from that point forward.
The NW6.5 BM machine in question was also virtualized last summer but I don't see what that would have to do with anything. The servers were upgraded and the original BM server converted to virtual disk files.
This machine has an I2O SCSI RAID controller and Novell decided to stop I2O support back in SP6, while Microsoft continues to support I2O without complaint. So to deal with the I2O support problems the machine runs Windows 2003 SP2, the free VMWare Server 1.06, and NW65SP7.
The machine has dual 1.4 ghz Xeons, and windows task manager load never exceeds 20% on CPU 1, with zero load on CPU 2. Two gig of RAM and 1 gig allocated to the BM VM, so the machine is not busy and it is not thrashing its memory.
A third issue the might be related but I cannot tell, is that the DSRepair Time synchronization check always shows a +1 for this server (from other servers) or a -1 for other servers (from this server). The time sources appear to be configured correctly, with a different NW65SP7 server being the master for all local servers including this one.
Yes, I am aware of SP8. I don't do service packs during the school year. I am going to have to wait until at least June before that can be done.

The little issues you noted seem entirely unrelated to me (timesync,
hardware, etc.)
What we need is a little more specific data for troubleshooting.
CLNTRUST works as follows:
1. Browser requests file from proxy, and proxy sees need to
authenticate user.
2. PROXY issues a UDP 3024 request TO the client. Note that this is
not a request initiated by the client where the proxy responds to it.
It is a request initiated by the server to the client, so the client
firewall has to allow that traffic.
3. Proxy waits for specified amount of time for a response from the
client. This is 3 seconds by default, which is normally plenty of
time. However, feel free to increase that value a bit, say to 5
seconds. (In the Authentication Context menu for Proxy). If you go
higher than 5 seconds, and it helps, I have to question what's wrong
with your network! Anyway, it can be useful to capture packets to see
what is going on. PKTSCAN.NLM can be used on the server to do that.
Wireshark can be used on the client.
4. Client PC receives a CLNTRUST request, and CLNTRUST responds.
Client32 also (I think) passes data to the server with user name and
password hash. However it works at this point, the important thing
about debugging here is that you should see a successful request in the
CLNTRUST stats. Problems include seeing no requests at all (0 usually
means firewall blocked the inbound traffic, though a nat hop between
server and client can also do that. Thousands of failed requests
usually means client isn't logged in or is not in the same tree).
5. Client PC's responses are returned to server, which looks up
username and confirms password hash. Proxy associates browser's IP
address with user name and compares name against access rules. User
name shows up in log files.
So, look for presence of UDP 3024 packets at the client to start with.
If there are network issues, where packets get dropped, you might see
the symptoms described.
Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on
BorderManager, go to http://www.craigjconsulting.com ***

Invalid state when running first time after compile

Often I will compile a package body without errors.
The first time I run it, I will get the package is in an invalid state. The second time I run the package it will run fine.
What is going on?
Thanks,
goo

Hi,
Dose it happen always ? Check if any object is getting changed. Is your package doing any thing which might be altering any objects being used by the package.
thanks

Package fails first time after changes

Similar Messages

Maybe you are looking for