"Invalid Usage - Missing Range Error" when modifying logging preferences

<B>Solution</B>
<P>
These errors can happen if there is a mismatch between the primary UNIX
group of the messaging server user and the Suitespot group that was configured
during the install. These Suitespot settings are located in the file
/suitespot_dir/install/ssusers.conf.
Make sure that the
Messaging Server user's primary group in the /etc/passwd file correlates with
the group name specified in the ssusers.conf file. Refer to
/etc/group to find
the relevant numeric group value (to put in /etc/passwd) for the Suitespot group
name.

Oracle's maximum precision for nvarchar2 is 2000. You have a nvarchar(4000) which exceeds Oracle's maximum precision and needs to be mapped to Oracle's long data type. But that would only work when the character set of the Oeacle database is a Unicode character set - else you would loose information. The character set of your database is WE8ISO8859P1 so you would not be able to display all characters hence the column is removed from the select list.
That's also documented in the DG4ODBC manual: http://docs.oracle.com/cd/E11882_01/gateways.112/e12070.pdf
See Appendix A Data Type mapping:
SQL_WLONGVARCHAR LONG if Oracle DB Character Set = Unicode. Otherwise, it is not supported
- Klaus

Similar Messages

Missing Field error when modifying user Master Record

We are using our corporate LDAP to authenticate our portal users and do not have (nor do we want) write permission to the LDAP. We are using additional attributes (ume.admin.addattrs) to hold information pertinent to the portal. We are running into a problem though when required information is missing from the LDAP user master record. For example, if the users email address is missing, when we attempt to save a user's record with the additional attributes we need, the system responds with a "Missing Field" error message and will not save the additional attribute until the LDAP record is complete. Currently the only work around to this problem is to notify the LDAP administrators and have them update the record (not a high priority for them).
Is there a way to have the portal ignore incomplete records and just save what it has?
Thanks
Ken Burd

We are using our corporate LDAP to authenticate our portal users and do not have (nor do we want) write permission to the LDAP. We are using additional attributes (ume.admin.addattrs) to hold information pertinent to the portal. We are running into a problem though when required information is missing from the LDAP user master record. For example, if the users email address is missing, when we attempt to save a user's record with the additional attributes we need, the system responds with a "Missing Field" error message and will not save the additional attribute until the LDAP record is complete. Currently the only work around to this problem is to notify the LDAP administrators and have them update the record (not a high priority for them).
Is there a way to have the portal ignore incomplete records and just save what it has?
Thanks
Ken Burd

ORA-01740: missing quotes error when synchronizing mobilink

Hi,
I'm getting a missing quotes error when synchronizing with mobilink.
followed by
[-10058] Unable to open download_delete_cursor
and the name of the table.
and name of the script
Script: {CALL "scriptversion".DOWNLOAD_DELETE_CURSOR_ABC (?, ?)}
How can I see what is causing this... I already checked the script for that table in the ml_scripts table.... nothing special there... the script looks exactly the same as in previous versions....
I'm assuming that it's the parameters that are creating the problem. but no idea on how to see them...
any suggestions?
thank you !

Hi,
thanks for your tip. I just did that and get a LOT of logging.
Not sure if my employer would appreciate me sharing DB details in public.
In private messaging I could send it through, but i guess that wouldn't help others with the same issue..
i also changed the startup parameters to -vt -o
And this is the result that I get (I modified scriptpackage name and cursorname a litle bit):
I'm guessing that : p1 and : p2 is incorrect as parameter....and the complaints come from there..
Also, this time I ran another publication and now it's complaining on the newly added table and not on that random old table I mentioned on my previous post.
PS. error message is in dutch since the server is in dutch, but it's the missing quotes issue.
I. 2014-03-31 15:36:26. <1> COMMIT Transaction: prepare_for_download
I. 2014-03-31 15:36:26. <1> Translated SQL:
                        CALL "scriptversion".DOWNLOAD_DELETE_CURSOR_ABC (:p1, :p2)
E. 2014-03-31 15:36:26. <1> [-10002] Consolidated database server or ODBC error: ODBC: [Sybase][iAnywhere Solutions - Oracle][Oracle]ORA-01740: Ontbrekend dubbele aanhalingsteken in identificatiesymbool.
                        ORA-01740: Ontbrekend dubbele aanhalingsteken in identificatiesymbool.
                         (ODBC State = 42000, Native error code = 1740)
E. 2014-03-31 15:36:26. <1> [-10002] Consolidated database server or ODBC error: ODBC: [Sybase][iAnywhere Solutions - Oracle][Oracle]ORA-01740: Ontbrekend dubbele aanhalingsteken in identificatiesymbool.
                        ORA-01740: Ontbrekend dubbele aanhalingsteken in identificatiesymbool.
                         (ODBC State = 42000, Native error code = 1740)
E. 2014-03-31 15:36:26. <1> [-10058] Unable to open download_delete_cursor
I. 2014-03-31 15:36:26. <1> Error Context:
I. 2014-03-31 15:36:26. <1> Remote ID: c44a5403-74ba-4c98-bf6d-4e1db5fb24c9
I. 2014-03-31 15:36:26. <1> User Name: USR:66ed647c-20b1-4cff-9663-8147b0e7e2fd
I. 2014-03-31 15:36:26. <1> Modified User Name: USR:66ed647c-20b1-4cff-9663-8147b0e7e2fd
I. 2014-03-31 15:36:26. <1> Transaction: download
I. 2014-03-31 15:36:26. <1> Table Name: MY_NEWLY_ADDED_TABLE
I. 2014-03-31 15:36:26. <1> Script Version: scriptversion
I. 2014-03-31 15:36:26. <1> Script: {CALL "scriptversion".DOWNLOAD_DELETE_CURSOR_ABC (?, ?)}
I. 2014-03-31 15:36:26. <1> End of Error Context
I. 2014-03-31 15:36:26. <1> ROLLBACK Transaction: end_download
I. 2014-03-31 15:36:26. <1> ROLLBACK Transaction: end_synchronization

Problems publishing a web-access on Sharepoint: Error when modifying list schemes

Good afternoon.
I have an application built with an access database with several forms and web macros which is published on Sharepoint 2010. Through this application - not too big not too complex (ca. 10 tables / less than 2000 records at most) - I receive updates
that are loaded into external applications, mainly excel worksheets, ms project files and so on.
I have been going through the cycle of developing and publishing new versions of the application on the same site for more than a year; suddenly, from severeal weeks ago on, I started receiving the following error affecting random tables (not always the
same) which crashes the compilation and publishing:
"Error when modifying lists schemes. Changing name to "ID" field on list XXXX failed"
And each time the list is different. And of course I am no trying at all to change the name of any ID field !????
Any clue of what might be happening?
Thank you

The article might have missed the step where the blogger might have missed the step. Read the following article and which confirms that you cannot use user controls in SB solutions.
http://msdn.microsoft.com/en-us/library/gg615454.aspx
If you are trying to build this in SharePoint 2013 then you must know that custom code is deprecated from SB solutions.
Deprecation
of Custom Code in Sandboxed Solutions
For SP 2013 your best bet is to create an APP or create a farm solution (God please forgive me). :)
Amit

"Missing Class" error when running web service

Hi,
I am getting an "Missing Class" error when running a web service. The web service was generated from a Java class via the "create J2EE web service" option.
The web service has a JAX-RPC handler class added, which belongs to the same package as a logging class. The logging class is used to write to a file for debug purposes. A "missing class" error is being generated whenever I attempt to invoke the web service (via the enterprise manager test util), the error refers to the logging class which is used by the main handler class. The JAX-RPC handler works fine by itself, the error is only seen when I attempt to use the logging class.
I have re-built, re-deployed from scratch again, but still get the same error! Am I missing something simple here?
thanks for any advice

Cant you paste some of your code, formatted in code tags? It looks like there is a problem passing some of the XMl response, it doesnt like a tag html.
If you post some code somebody might actually be able to help you.

Invalid change to class error when deploying EJB

We have EJBs that were built by Webgain Visual Cafe and successfully deploy
to WLS 5.1. We then use the WLE EJB Deployer Tool to build WLE container
classes and deploy the same EJBs in WLE 5.1.
One EJB does not deploy in WLE. The ULOG error message is:
133929.EA-LAWSTUC!JavaServer.517: main: IJENGINE_CAT:150: ERROR: Invalid
change to class service.Request
133929.EA-LAWSTUC!JavaServer.517: main: EJB_CAT:29: ERROR: While deploying
jar ServiceEJB : com.beasys.weblogic.classloader.RedeploymentException:
ERROR: Invalid change to class service.Request
133929.EA-LAWSTUC!JavaServer.517: Finalizer: IJENGINE_CAT:152: INFO: Closing
jar C:\aj\ServiceEJB_WLE.jar
Does anyone know what can cause an "invalid change to class" error when
deploying to WLE 5.1? Especially since the EJB deploys successfully in
WLS.
Carl Lawstuen

Reason: database keeps a reference of the class in JAVA$CLASS$MD5$TABLE table. This table keeps a refrence to all java classes loaded in database, and is present in each schema you deploy classes. That's the reason why if you change the application module name, you can load this classes. It instead keeps a reference if you use DROP JAVA CLASS command to drop a java class from de database. Use DROP JAVA command to clear the reference of the dropped classes when dropping it.
You can see this table as a class dictionary of the database, and you don't have to handle this records manually.

Error when modifying VM Memory - "Invalid minimum memory amount"

Good day,
I am trying to modify a virtual machine's static memory setting using VMM 2012 R2 with UR 2. The VM is running on a Hyper-V 2012 R2 host cluster. Whether I use the VMM GUI or attempt to issue the command via VMM Command Shell, I get the same
result:
PS C:\Windows\system32> $VM= Get-SCVirtualMachine -name "SomeVM"
PS C:\Windows\system32> set-scvirtualmachine -VM $VM -MemoryMB 4096
set-scvirtualmachine : VMM cannot complete the host operation on the hyperv.domain.com server because of the error: 'SomeVM' failed to modify device 'Memory'. (Virtual machine ID22AD6F9F-E5B6-4B8D-9AB6-6A48A9521297)Invalid minimum memory amount assigned for 'SomeVM'. The minimum amount of memory you can assign to a virtual machine is '32' MB. (Virtual machine ID22AD6F9F-E5B6-4B8D-9AB6-6A48A9521297) (Error ID: 12700, Detailed Error:Unknown error (0x8005))
Resolve the host issue and then try the operation again.
To restart the job, run the following command:
PS> Restart-Job -Job (Get-VMMServer localhost | Get-Job | where { $_.ID -eq"{8301e122-b69e-4ac0-82d7-82c473d99e3a}"})
At line:1 char:1
+ set-scvirtualmachine -VM $VM -MemoryMB 4096
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ReadError: (:) [Set-SCVirtualMachine], CarmineEx ception
+ FullyQualifiedErrorId : 12700,Microsoft.SystemCenter.VirtualMachineManag er.Cmdlets.SetVMCmdlet
The error indicates that I am attempting to set the VM memory to something less than 32 MB, but as shown above I am actually trying to set it to 4096 MB. I also get this error when I attempt to modify the value using Hyper-V Manager (or in this case
the Failover Cluster Manager). Note that I am not attempting to configure dynamic memory on this VM.
One more note about this VM - it was migrated from a Hyper-V 2012 host cluster performed by exporting the VM from the old host, and importing it to the new one.
Not sure if anyone else has experienced this error or if there is a work around.

Really what the error is not telling you, is that you need to set the value for minimum memory in addition to the value you are setting.
if dynamic memory is on, you need to set them all:
http://technet.microsoft.com/en-us/library/hh801341.aspx
-MemoryMB<Int32>
Specifies, in megabytes (MB), the amount of random access memory (RAM) on the host that is allocated to a virtual machine. The default value is 512 MB. For a virtual machine on which dynamic memory is enabled (on a host running Windows Server 2008 R2 SP1
or later), use MemoryMB to specify the startup memory value.
I have run into this issue what I had VMs that I migrated to Hyper-V 2012 R2, because the minimum was actually lower. Or it was empty if the VM had fixed memory. And now it can no longer be an empty setting.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Unknown Error when I Logging and Transfer P2 Card files in FCP 6.0.6

I have been trying for the past two week to Log and Transfer P2 files to my external hardrive using FCP 6.0.6 unsuccessfully.
Originally I tried to Log and Transfer directly from the Panasonic HPX-170 in between my shooting. The first time it was a success but from then on I always get the same Unknown Error when attempting to transfer. When I encountered the Unknown Error during the second transfer I went on to create folders with the P2 contents on my external Hard Drive.
When I drag any of the P2 folder content on the Log and Transfer window I can see all the clips. I can successfully transfer small B-roll clips I have but any big size file (all my interviews) return an Unknown Error symbol at the end of the transfer. I believe this is probably why I didn't encounter any issues during my first time.
I tried deleting the preferences in FCP and then Logging and Transfer and it works if the systems settings are set for the Mac Pro but not for the external HD. The problem is I don't have enough space on my Mac. I have cleared 45GB of space but my P2 files total 54GB. I tried the same process with a Mac Power Book with FCP 5.1.4 and again in encounter the same problem.
The external HD is a 1TB Western Digital that I have used before with FCP for editing but never before with P2 files. Its in good working order and has 79GB free space remaining. Both the camera and the P2 cards (16GB and 4GB) are also performing as expected.
I would appreciate any suggestions.

#36 - One or More P2 files failed to import.
Shane's Stock Answer #36 - "One or more clips failed to import..."
Very often in the field with this camera the camera operator will delete clips from the P2 card that they just don't like. That is the beauty of this camera. But, the still for that video file (located in the CLIP folder in the CONTENTS folder)...the still that you see when you are in the P2 Import window...is not deleted. So you will see the image, and the name, but the video file would have been deleted.
What you can do it compare the file names in the VIDEO folder and CLIP folder and see if anything is missing. If something is, then you know what the problem is. You can then just import the rest a few at time, skipping that one.
ALSO...in the P2 Import window...in the P2 Browser, there is a little sprocket drop down menu. Click on that and choose PREFERENCES. Uncheck REMOVE PULLDOWN and then try importing again.
ALSO...make sure your file names aren't too long. Try shortening them and see if that works.
ALSO make sure that the folders that contain the CONTENTS folder doesn't have any odd characters like /!@#$%^&*()?.
Shane

11i Error when modifying account

eBus 11.5.10.2, DB 10.2.0.4, OID 10.1.4.0.1, RHEL4
Apps and OID on are on the same server, single instance, DB is on a seperate server.
Recently when we try to modify the account of a user we experience an error when trying to save the changes.
The pop-up error states:
Unabled to call fnd_ldap_wrapper.update_user due to the following reason:
ORA-20001: Unabled to call fnd_ldap_wrapper.update_user due to the following reason:
An unexpected error occured. Please contact System Administrator.. (USER_NAME-XXXXXXX)
I enabled logging for FND and got the following in the fnd_log_messages table:
fnd.plsql.oid.fnd_oid_plug.get_realm_dn: LDAP SESSION closing in EXCEPTION BLOCK - START
fnd.plsql.oid.fnd_oid_plug.get_realm_dn: LDAP SESSION closed in EXCEPTION BLOCK - END
fnd.plsql.oid.fnd_ldap_wrapper.update_user: ORA-06503: PL/SQL: Function returned without value
fnd.plsql.oid.fnd_ldap_wrapper.update_user: l_err_code :FND_SSO_UNEXP_ERROR, l_tmp_str :ORA-06503: PL/SQL: Function returned without value
So it seems something returns without a value, but I am not sure how to track down what. I checked and the user account is in OID. It seems to be occuring to accounts that are linked via the "Customer" field on Define as opposed to "Person"
What can I enable log wise or check to find the cause of this issue? I have searched metalink and all the documents I have found concerning Function not returning a value are for other items and not accounts.
Thanks
Edited by: Toolman21 on Sep 16, 2010 10:47 AM

Just to update the forum post, I have finally discovered the issue. The Global User ID that was in eBus did not match that in OID, therefore it was returning not found.
The solution was to update the GUID in APPS.FND_USER to match what OID contained. If the SSO link on the fly feature is used in provisioning you can simply set the USER_GUID column in APPS.FND_USER to null for that user and once they log in again it will be repopulated from OID. Alternatively you can use the script $FND_TOP/patch/115/sql/fndssouu.sql to change this for a user as well.
@$FND_TOP/patch/115/sql/fndssouu.sql USERNAME
Thanks for the help.

JNDI error when modifying schema

While modifying some objectclasses on IPlanet LDAP using JNDI I get the following error:
[ERROR] [LDAP: error code 1 - The objectclass is malformed. Missing opening "(" around allowed attributes]
Note that this happens on certain object classes and not in others but I can not determine a pattern. I also get the same error when removing certain objectclasses (it works ok with others).
I'm using the code given as an example in the Java tutorial to modify the schema.
Any input would be apreciated.
Regards.
-- Paul

Pls pass either of following two properties to the environment parameter of InitialDirContext:
New property name: com.sun.jndi.ldap.netscape.schemaBugs=true
Old property name: com.sun.naming.netscape.schemaBugs=true
They are used by Sun's JNDI LDAP driver to work with Netscape LDAP server.

"Runtime Error" when I log-on to myspace

I'm getting a "Runtime Error" when I try to log-on to myspace.com. I get the same error when I click on certain links with in myspace. I can log-on from other computers and on the this computer I can do just about anything else I need to do. I'm running mac os x 1.3.2 (v312.6).
How can I resolve this issue?
This is the full error message:
"Server Error in '/' Application.
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".

<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.

<configuration>
<system.web>
<customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration>"

Hi i'm having the same problem =(
i went to log on to my myspace and i get this message:
Server Error in '/' Application.
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".

<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.

<configuration>
<system.web>
<customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration>
----and i dont know what to do.
Can anyone help me please coz this suxxxxxxxxxx =(
thanks for any help and replies @};-

[SOLVED] mkdir: missing operand error when installing Arch

I am on my first attempt of installing Arch Linux and when i type the command /arch/setup i get the following error
Welcome to Arch Linux Installation Framework
/usr/lib/libui.sh: line 120: /usr/bin/dirname: Input/output error
mkdir: missing operand
Try 'mkdir --help' for more information.
ERROR: Cannot create log directory
I am attempting to install from an ISO cd i burned.
I am extremely new to this and searched the Installation section of the forum with no luck. Thanks for any help.
Last edited by gnuub (2011-05-18 03:30:07)

I am using the 2010.05-core image. I tried installing on a different machine and it worked. I swapped the harddrive and it worked this time, but i received the following error before the arch boot screen came up.
Buffer I/O error on device sr0, logical block 82944
I must have missed this error the first time by not paying attention, because the process continues after repeating the error a few times.

Invalid docx file format error when publishing

Good morning all,
I've been using UPK 3.5.1 Developer for years with Office 2003 (yes, I know we should upgrade, but that's out of my control), and have successfully published many times. After my latest publishing, the following error showed in the Activity Log:
Task: Job Aid / Postprocessing document
Comment: Invalid docx file format odpub://int/PlayerPackage/Temp/03d444ee-681b-406b-aba2-cd4b669702e2_JOBAID.docx
All of the other job aids have published to a .doc format, so I'm not sure why this one is behaving differently. I located the offending topic, and in UPK, the preview provides a similar error when I try to preview the job aid. Strangely enough though, in the published project, the job aid for that topic prints just fine. I know I can just ignore the error since the finished product works, but I'm just wondering if anyone has some insight as to why this error occurred.
Thanks!
Brenda Hutch

I am having the same issue. It is during export - almost immediately after exporting begins. No file is created.

Error When Modifying a Resource Event as Designate

Hi,
I'm developing an app for a conference room device using the C APIs and am having a problem modifying an event for a resource. If I use the same user ID as with which the event was created, everything works fine. However, I'm attempting to use an ID that is set as a designate for a group of resources, and when I do, I get a CAPI_STAT_DATA_UID_NOTFOUND error when using the CSDK_FLAG_STORE_MODIFY flag.
Here's the data I'm sending:
VERSION:2.0
PRODID://Oracle//CAPI//EN
BEGIN:VEVENT
UID:20070111T141735Z-101b6d4-65-3559-Oracle
X-ORACLE-EVENTTYPE:APPOINTMENT
DTSTART:20070111T092000
DTEND:20070111T095000
END:VEVENT
END:VCALENDAR
Flags CSDK_FLAG_STORE_MODIFY | CSDK_FLAG_STREAM_NOT_MIME
The SDk version is 10.1.2.0.0
Is there any inherent problems with this approach?
Thanks,
Dave Bowman

Here's some additional information on the problem and the sequence of events:
1) Open the connection using user ID that is a designate for the resource.
2) Change the user ID to the resource identifier ("?/RS=RENCI - Europa
Conference 520/") using CSDK_SetIdentity with the flags set to CSDK_FLAG_NONE.
The function call appears to work correctly and returns no errors.
3) Modify the event data using CSDK_StoreEvents with the the above data.
4) The error returned is: CAPI_STAT_DATA_UID_NOTFOUND. And the event ID is
correct.
I've tried both with and without using the CSDK_SetIdentity function, with the
same results.
Is it feasible to use this approach to have a resource be able to modify an
event that was created by another user? Or is the use of another ID with
higher privileges required? Such as 'SYSOP'? If the latter, obtaining SYSOP
privileges may be problematic as we are just users of the Calendar system and
not the owners.
Thx.......

Portal Runtime error when modifying: com.sap.portal.runtime.logon.par

Hello,
We need some help because we get 'Portal Runtime error: iView: N/A Component Name:N/A' error when trying to access portal logon screen.
This is what we've done:
We've modified com.sap.portal.runtime.logon.par file and we've uploaded it but it doesn't work. Because of the error, we've overwritten this file with the original one but now it's imposible to access portal.
The situation it seems to be like before the modification of the .par file but we get the same error and can't access portal.
Please, do you know what could be the problem?
Thanks in advance

Hi Belen,
Here are the steps you would need to take
1. import the original par file into the NWDS and name the project as
    com.sap.portal.runtime.logon
2. Make sure the project name is com.sap.portal.runtime.logon
3. use winzip/winrar to extract the com.sap.portal.runtime.logon.par file in
    a local directory
4.Under the lib you would find two jar files copy them and paste them in your project
   under dist>PORTAL-INF>lib directory
5.move the files cert....till umResetPass....jsp into the PORTAL-INF directory
6. export the par to the server in question
7. restart your server
This should solve your problem..
Thanks,
Gokul

"Invalid Usage - Missing Range Error" when modifying logging preferences

Similar Messages

Maybe you are looking for