Inventory Load - Running Init of Setup tables

I'm planning the initial load of Inventory data and want to make sure that I understand what needs to be done. 
Question 2 - To save time can I run the initialization of the setup tables for 2LIS_03_BX,BF,UM in parallel.  Or do I have to wait for one to finish before I submit the next?
Thanks,
Chris

Chris,
Question 2 - To save time can I run the initialization of the setup tables for 2LIS_03_BX,BF,UM in parallel. Or do I have to wait for one to finish before I submit the next?
--> You can run parallel, you can also run parallel for each datasouce(eg: BF) by providing proper selection(like, Plant, date..ect)
Hope it Helps
Srini

Similar Messages

  • Missing PO in 2lis_02_itm init extraction / setup tables

    Hello Gurus,
    could anyone please help me out with this toppic:
    I want to extract Purchase Orders to BW via DS 2lis_02_itm. Source System is R/3 4.6c. Filling up the setup tables is working. My problem is, that there are several Purchase Orders which are not filled in the setup tables (so no extraction to bw)! I have checked these PO and for me they seem fine. I can´t find any reason why they aren´t extracted. Of course i am running all programms whithout any restrictions. I have debugged the programm rmceneua with one specific po which is not extracted but can not find a reason why it is not written to table MC02M_SETUP.
    Did i miss some customizing settings? Are there some kind of PO which are not extracted because of there PO Type (ZCO/ZB) do they eventually have a wrong status?
    I can not find any information about the functionality of programm rmceneua. Maybe you can help me out of this?
    Thanks a lot
    JANOS

    Did you check whether the process key is maintained properly?

  • Setup table - Archiving run option

    Hi all,
            I want to check my inventory data have archiving run while filling setup table. Also archiving run data in which table i can find. If required R3 data in archiving table, we no need to think about backup data in BW.
    thanks

    Hey Raj,
    Your question is not clear?
    If you are talking about archived data
    - Archived data will be not be present in the source tables, you need to perform special mechanism to retrieve the archived data.
    - if you want to extract the data using the data source to BW you will not be able to extract the archived data.
      For this you need to write a exit in CMOD for that particular data source to additionally extract archived data where for example BSID-XARCH =x or BSEG-XARCH=X etc.
    or
    one more way is to extract the archived data by creating a generic data source on top of the archived tables for only those records which are archived (XARCH = X).
    Just perform a full update as the archived documents does not have updated records. you can go for creation of generic data source it would be a better option to extract the archived data instead of disturbing the existing data flow.
    Regards
    KP
    Edited by: prashanthk on Nov 17, 2011 11:58 AM

  • 2LIS_03_UM - FULL LOAD VIA SETUP TABLE NOT EQUAL TO DELTA

    Hello,
    I try to load stock data with 2LIS_03_UM.
    When I extract data using setup table and full load I don't get the same records as I get with delta load. Although the key figures values are the same, the documents numbers are different. Most documents from delta load are ML (material ledger) documents while documents from full load (via setup table) are mainly FI documents.
    What can be the reason? How can I fix it?
    Thank you,
    Hadar

    Hi,
    Delta load extracts data from Delta Queue based on your update mode selected in LBWE.
    Full Load or Init load extracts data from Setup tables, here if you are extracting data from setup tables ? did you fill the setup tables now or not after deleting the existing data of the setup tables?
    are you getting same values when compare to R/3 and BW data for some document numbers?

  • Selective load into setup table

    Hello,
    Is there any way we can load multiple selections into setup table in OLI7BW. Currently I am only able to load range of values. But i have a list of almost 2000 records and they are not in sequence. And loading one by one requires too much effort. Loading ranges would load millions of records.
    Please advice.
    Regards,
    Tints

    Hi Tinu,
    Pick all 200 0 orders and check in VBAK table for CREATED ON field.
    Down load all 2000 orders into excel and put filter on created on value....then note down all the created on dates.
    Now you can load orders based on created on date. make sure that you are loading the data to DSO as it avoids duplication
    Regards
    SujanR

  • Selective Deletion and Data Load from Setup Tables for LIS Extractor

    Hi All,
    We came across a situation where one of the delta in PSA was missed to load in DSO. This DSO updates another cube in the flow. Since it has been many days since this miss come in our knowledge we need to selectively delete data for those documents from DSO & Cube and then take a full load for the Documents filling the setup table.
    Now what will be the right approach to load this data from setup table > DSO > cube. There is change log present for those documents and a few KPI's in DSO are in summation mode.
    Regards
    Jitendra

    thanks Ajeet!!!!
    This is Sales Order extractor, the data got loaded to ODS just fine, but since the data is coming to ODS from different extractor. Everything is fine in ODS, but not in the cube. Will Full repair request and Full load would it make difference when the data is going to cube? I thought that it would matter only if I am loading to ODS.
    what do you mean "Even if you do a full load without any selections you should do a full repair ".
    thanks.
    W

  • URGENT : Please help: Purchasing and Inventory loads

    I am currently in BWQ. I did the inital deletion of set up tables by LBWG and then ran the set up jobs through SBIW for Purchasing and Inventory.
    I also did the industry setting and processkey .
    I ran the init load yesterday and it gave some records and then deltas brought 0 records . For some reason I felt that there should not be 0 records and I went and deleted the set up table again and ran the set up jobs. I can see records in the set up table and RSA3.
    But when I am running the load today it brings 0 records. I thought may be the delta ran this morning so it brought 0 records. therefore I ran the full repair reuqest but still there only 0 records.
    Can someone explain this and advice what needs to be done.
    Thanks

    Hi BI TCS
    Initially when you loaded init data you got some records and delta brought 0 records. This is logical if there are no new records creates in R/3 system or you have not executed delta collector job - Job control through LBWE for a particular application.
    Now carry out following steps for purchasing data loads -
    1.delete the setup tables using tcode LBWG
    2.perform set up for the purchasing in background mode
    3.check the job log for step 2 in SM27
    4. find out no of documents written to setup tables for purchasing using tcode NPRT
    5.Now load the init load to BW- this will load the data that you have covered under setup tables
    6. Now create/change some data in R/3. This data must be withing your init range used in init infopackage. If you have done init load with no selection parameters then no problem.
    7. Run job control for purachasing in LBWE
    8. Now load the delta load -> it should load the correct delta data into BW.
    Hope this resolves
    Regards
    Pradip

  • Why do we delete setup tables?

    Hi Experts,
    While doing Standard LO extraction why do we delete setup tables?
    Do we delete even for delta loads?
    Thanks in advance,
    Raj

    Hi,
    Normally the delta will happen through rsa7 and the full/init  load will happen through setup tables.
    The setup table deletion is done to avoid any duplicacy in the setup table. Before doing the full/init the data for that particular selection condition is checked in the ssetup table if completely not there the remainint data is deleted from teh SETUP table and again forthat selection parameters statistical run is done to fill in the setup table and then full/init is done to extract the data to BW.
    Hope this helps
    Assign points if helpful
    Janardhan KUmar

  • ORA-20001: Excel load run ddl error:

    When i am trying to create new table from CSV file than it gave me this error message
    ORA-20001: Excel load run ddl error: drop table "FILEONE1PTF1" ORA-00942: table or view does not exist ORA-20001: Excel load run ddl error: create table "FILEONE1PTF1" ( "CLIENTID" NUMBER, "APP_PROFIT_IND_IRS" VARCHAR2(1), "PROVIDER_OPT_IRS" VARCHAR2(30), "EFILE_FORM_IRS" NUMBER, "STATE_IND_IRS" VARCHAR2(1), "PARTNER_QTY_IRS" NUMBER, "CUSTOMER_TYPE_IRS" VARCHAR2(1), "COMPANY_NAME" VARCHAR2(255), "LEGAL_NAME_IRS" VARCHAR2(30), "YTD_TRNSMT_RET_IRS" NUMBER, "YTD_ACT_R
    Any one has any idea? Why it is doing this?

    1)Select 'Import SpreadSheet Data' Option.
    2)Select Import To 'New Table. Import from 'Upload file (comma separated or tab delimited).
    3)Upload CSV file which is around 30MB.
    4) Give Table information table name 'Hetal05' and all data type are Varchar2.
    5)Select Primary Key option. Primary Key From 'Create New Column'. Primary Key Population 'Generated from a New Sequency'.
    6) Click on Import Data.
    Now i got this message
    ORA-20001: create_table error: ORA-20001: Excel load run ddl error: create table "HETAL05" ( "ID" NUMBER, "APP_PROFIT_IND_IRS" VARCHAR2(30), "PROVIDER_OPT_IRS" VARCHAR2(30), "EFILE_FORM_IRS" VARCHAR2(30), "STATE_IND_IRS" VARCHAR2(30), "PARTNER_QTY_IRS" VARCHAR2(30), "CUSTOMER_TYPE_IRS" VARCHAR2(30), "CUST_ID" VARCHAR2(30), "NAME1" VARCHAR2(255), "LEGAL_NAME_IRS1" VARCHAR2(255), "LEGAL_NAME_IRS" VARCHAR2(30), "YTD_ACT_RET_IRS" VARCHAR2(30), "YTD_REJ_RET_IRS"
    I am using HTMLDB 1.5

  • Whats the Actual use of the Setup table apart from the Full/Init  loads

    Hi  guru's
      could u explain  whats the Actual use of the Setup table apart from the Full/Init  loads  in Lo Extraction

    Hello Guru,
    The Setup table is used mainly for storing the Historical data whereas the new and changed records will be maintained in the Update table.
    By storing the Historical data in the setup table you don't need to disturb the Application table anymore.
    Please go through the following blogs
    /people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
    /people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
    /people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
    /people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
    /people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
    /people/vikash.agrawal/blog/2006/12/18/one-stop-shop-for-all-your-lo-cockpit-needs
    https://websmp201.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002719062002E
    Hope it helps
    Thanks,
    Chandran

  • Setup table for Inventory

    Hi Friends !
    Was reading the inventory docs for the setup table. How to perform step 2?
    2. Setup of statistical data for material documents in the R/3 source system. Here, all
    historical material movements are to be set up that has lead to the opening stock in
    step 1 (this makes it later possible in BW to calculate historical stock values). Ideally
    you still keep the posting block during this run. If this is not possible you have to
    make sure that by restrictions for posting date or the material document number you
    only select those material documents that have created the opening stock (step 1).
    Please consider that material movements that have been posted into the future for a
    date (field BUDAT) after the initial stock date are not getting selected if the upper
    restriction bound is exactly this date. In this case you have to choose an appropriate
    upper bound like 31st December 2099 and to keep the posting block. Also if you
    post new documents to a date (field BUD AT) earlier than the initial stock date you
    have to keep the posting block as time restrictions wonu2019t help to determine the right
    documents (maybe restrictions by document number help).
    With Regards
    Rekha

    Hi Rekha,
    Posting block is nothing but downtime. While filling the setup tables you should ensure that no postings happen in the system. To summarize step 2 -
    You should run the BX load and the Init BF load for the same selections. If there is any difference, it would lead to wrong stock values in BW. BX is used to setup the opening balance. BF init should be run with same selections so that it brings all movements which resulted in a stock setup by BX. We compress BF init load without marker (NO MARKER ticked) so that the stock doesn't get doubled because the result of the movements setup by BF is already extracted by BX.

  • Issue while filling Inventory setup tables.

    Hi,
    Here we are facing a critical issue, while filling Inventory setup tables, we have done BX setup successfully. Not able complete BF and UM because of performance issues.
    We filled 40% of BF and UM, since we dont have system downtime and stoped the setup at that movement. Shall we do BF & UM setup without R/3 system downtime. Is there any other way we can fill the BF, UM setup tables.
    Your help is really appreaciated.
    Thanks
    BK

    Hi BK,
    Ideally you need the downtime when doing the setup for current and previous period as these are the only open ones where you can expect changes to happen due to user postings. What selection did you give when doing the set up? One idea is to break up the set up job so that each job loads for a week and then run the jobs in parallel. This would work for BF and then for UM of course you need to run it per company code. Are you using on ODS in your data model?

  • Data loading for Logistics Data Extraction 2LIS_06_INV through setup tables

    Hi Guyz,
    I have LO Datasource 2LIS_06_INV which I am using for extracting Invoice Verification Data.
    I had intialized and loaded invoice data in BI system and was using chais to load daily.
    Now I want to load data again from scratch from source system.
    As of now I know we need to delete and fill up setup tables in source system keeping the users locked so that no new records are created that particular moment.
    But what about the delta queue and extraction queues.
    Do I need to do something over there because as I understand there will be records in both of them so before filling the setup tables I need to delete both the queues and then fill the setup tables so that duplicate records should be avoided.
    Please let me know what exactly should I do in detail.
    Appreciated in advance.
    Regards,
    raps.

    hi,
    this entirely depends upon the DS, if the DS delta type supports overwrite mode then you need not lock the users, you can start the setup job without deleting the delta queues as well coz even if the record is extracted twice the values won't mess up as the flow will be in overwrite mode. If delta type of DS is Additive in table ROOSOURCE then you need to lock down the users or run the job over a weekend when no users are logged in.
    regard,
    Arvind,

  • How to run the setup tables in CRM for 0CRM_LEAD_I datasource.

    Hi all,
    How to run the setup tables in CRM for 0CRM_LEAD_I datasource.
    what is the tcode and steps to follow.
    Thankyou.

    you dont have to do set up tables for 0CRM_LEAD_I.
    run the init infopack in BW and then subsequent delta's

  • Setup tables Inventory Management

    Hi,
    I want to fill setup table for BX via tcode MCNB (in R/3).
    Can I start with the setup table for BF using tcode OLI1BW parallel or I have to wait till the job RMCBINIT_BW (tcode MCNB)
    is finished!
    Same question for UM: Can I start the setup table for UM (tcode OLIZBW) parallel with the job RMCBNEUA (tcode OLI1BW)
    or I have to wait till the job RMCBNEUA is finished!
    Is there any possibilty to enter more company codes for the setup table for UM (tcode OLIZBW) as we have 120 company codes
    Or I have to plan the job for each company code separtely.
    Moreover I will load data (first opening balance, movement, revalaution) into BW when the setup tables are filled on R/3 side.
    Is it ok?
    Thanks for the answer.

    Hello Moha,
    Yes, Venkat, is right.
    This is the order
    2LIS_03_BX3 Material stock (Parallel)
    2LIS_03_BF Material movements (Parallel or with UM)
    2LIS_03_UM Revaluations
    Please see this Inventory Document
    [How to Handle Inventory Management Scenarios in BW (NW2004)|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]
    [Non-Cumulative Values / Stock Handling|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31]
    Thanks
    Chandran

Maybe you are looking for