Inventory onhand quantities check from third party OM system - EBS R12

We need to build a custom program in EBS which will give the onhand quantity availability of an item being ordered (in third party system), when being called from the third party ordering system. How do i start building such a custom program in EBS (tables, some logic ideas). Any inputs?

First of all, find out if you need to get Onhand Quantity in Oracle or the Available quantity in Oracle.
Getting Onhand quantity is a matter of simply looking up one table.
Getting availability is a little bit more complicated.
Then you need to find out the architecture. Is the 3rd party app going to have a real time connection to EBS? Can it connect to EBS using dblink? Does that app need a file on daily basis?
You need to define your requirements further.
Sandeep Gandhi

Similar Messages

  • How to configure PA48 for hiring/rehiring from third party applicant system

    Hi,
    We are building the interface between SAP and third party applicant system. There is no ALE/RFC possible, so we will  develop a ABAP program to fill the interface table T752F from a XML file from the vendor system.  We would like to use transaction PA48 for performing hiring transaction.
    Question:
    1. We need to use 3 differnt action types depending on whether it is external candidate/Internal candidate or re-hiring. How to default the correct action type? What are the configuration steps?
    Would appreciate if anyone could share some documenation on the whole data transfer process.
    Appreciate your quick reply.
    Thanks,
    Jaya

    Hi Danish,
    Yes, you can supply HR action type in the in the interface (T752f-massn), which will be defaulted when you run the hire action from PA48 screen.
    Hope this is helpful.
    Jaya

  • Credit Check with Third Party Process

    Hi Gurz,
    I know about third party process but my problem is with credit check of the customers.
    If customer has not got enough credit limit to process the order in normal senario credit controller has to manually release the order as system blocks it. In third party process system will give you warning message when saving sales order about customer credit limit but allows you to save sales order. Once saving sales order it authomatically creates Purchase Requisition. From PR purchasing creates P.O. with out knowing about customer credit limit issue. and so on. In other words goods supplied to customer even though credit limit has exceeded. This user don't know untill raising the invoice to the customer which is too late.
    Can we stop creating Purchase requisition or block purchase requistion for credit check ? or there are better way of handling the process for credit check?
    Thanks in advance

    Hi,
    Try to implement OSS note -738171 - Delivery block does not influence purchase requisition.
    Following is the details of the note;
    Summary
    Symptom
    The delivery block in a sales order does not prevent the generattion of the purchase requisition in a third-party or individual purchase order item. Regardless of the Customizing settings in the delivery block, the system confirms the TAB or TAS item and generates the purchase requisition.
    More Terms
    Order, purchase requisition, PReq, TAB, individual purchase order, individual purchase order item, TAS, third-party, third-party item, SD order, delivery block, VBAK-LIFSK, VBEP-LIFSP
    Cause and Prerequisites
    Solution
    Create a user-specific user requirement (for example, 902: BEDINGUNG_PRUEFEN_902 in Include LV07A902) as a copy of standard user requirement 102 and assign it to requirement 'Preq' by using Transaction OVB5.
    In the source code of the user-requirement, program a check for the delivery block which, if necessary, triggers an ERROR_EXCEPTION which prevents the generation of the purchase requisition.
    You can use the existing check for the credit block as a template.
    Regards,

  • Can not receive emails from third party email accounts

    Recently I started working for a small business which has small business server 2011 and exchange 2010 installed. Before I started there were eight user accounts and they all have unlimited email access. I created a few users through sbs AD and also from
    exchange console a week ago. Unfortunately none of them can not receive emails from third party accounts. they all can receive internal emails and also can send mails to any email accounts internally and externally. 
    This is a night mare for me as new users are having trouble with communicating via mails. I have tried all the methods and now thought of posting this issue on tech net. Please help me on this!!
    Thanks a lot!! 
    Sammy 

    Checklist for testing inbound email problems, I am assuming outbound emails works ok.
    1. Check Port 25 forwarding on all modems routers/firewalls
    2. MX Record is created and pointing to the correct Public IP Address, use MXToolbox.com to verify MX Record and test SMTP flow. Also Verify your public IP has not changed, use whatsmyip.org to check you public IP
    3. If using POP Connector Service, make sure POP accounts are created properly
    4. If using a 3rd party spam host, make sure they forward email to correct public IP address, use step 2 to verify your public IP.

  • Sender RFC from Third Party System

    I have a vendor who is actually communicating through RFC from third party Application to SAP R/3. Now we are trying have XI in between. Where as with minimal impact on both sides.
    Solution.
    1. Have the RFC made as ZRFC in XI. Let the vendor call the RFC in XI ABAP and internally make an RFC call through XI Interface to R/3 as Sync Interface. Because we need to report the information back to the system where the request initiated.
    2. Have RFC INI file copied as SAP Suggests under one of the folders. Develop the regular RFC to RFC Interface via XI.
    Is there any other alternatives other than the above mentioned solutions? Or out of those 2, which one will provide the best performance
    Appreciate any feedback. Please advice

    That's exactly what we are trying to achieve here. By Eliminating direct connection R/3, we are placing XI in between. But with the budget/timeline constraints from the Partner side, we are trying to have minimal change on the partner side. They might not change something to web service etc...
    Here is the text about INI file
    You can configure the non-SAP RFC client to connect to the sender communication channel in the following ways:
    ■       By defining the parameters PROGID, gateway-host, and gateway-service within the saprfc.ini-file using RFC-SDK.
    ■       By using appropriate parameters in the function RfcOpenEx.
    If you use the saprfc.ini-file, the respective RFC destination has to be of type R.
    All the parameter values used within the saprfc.ini-file or with the function RfcOpenEx should match the entries maintained within the corresponding sender communication channel.
    Example for the saprfc.ini-file is as follows:
    DEST=RFCCLIENTEXT
    TYPE=R
    PROGID=P106646.HKExternalClient
    GWHOST=pwdf2153
    GWSERV=sapgw40
    Please check the following link, for the same  text on RFC Sender
    [Help.SAP|http://help.sap.com/saphelp_nw04/helpdata/en/67/6d0540ba5ee569e10000000a155106/content.htm]
    Using the same Sender RFC for non-SAP System, please share any ideas

  • SAP Inventory management interface with Third party Warehouse System

    Hi Experts,
    Need your input for designing the SAP solution with existing Third party warehouse system ( Exacta ):-
    SAP ERP will be implemented for all locations of Client ( SAP MM, FI, PS , HR etc ).The Client has 10 distribution centres which are on Exacta Warehouse systems and will be linked with SAP Inventory management system.
    The way it will work - Goods receipt will always happen in SAP for all locations and then interface needs to Trigger subsequent Putaway activities at Exacta Ware house ( third party warehouse system) for those 10 locations.
    Goods Issue for these locations will happen from Exacta and then update will be posted in SAP via interface.
    All locations will be created as Plant /Storage locations in SAP.
    Need your inputs what special configurations need to happen in SAP for those locations so that goods receipt in SAP can trigger putaway activities in Exacta system .
    Do we need to do configuration for decentralised Warehouse in SAP for handling this?
    Pl. give your inputs based on your past experience where you handled such scenarios via interface with SAP Inventory management and legacy warehouse systems.
    Thanks for quick response on this.
    Regards,
    Krish

    Krish
    This is a std business process where clients have used their existing warehousing systems but implemented SAP forother functions such as Order entry, inventory mgmt and procurement, financials.
    The typical interface that needs to happen is
    1. Sales order ( and or delivery)
    2. Invetory needs to be passed to the WH. Typically people send it when SAP GR takes place.
    3. When WH system does picking, it sends signal to SAP which then does PGI for the sales order delivery and that takes the stock out of the system.
    Material master has to be transferred or mapped between two systems. Also, other elements need to be mapped between two systems.
    The way I have seen this happening is :
    you have an output on the SAP GR process. That creates an idoc to the WH system. Based on the capabilities of the WH system, it then does appropriate actions in the system.
    Many times, middlewares are used to translate/ map the data between SAP and the WH systems.
    So system wise, there is ALE setup that needs to take place for IDOC creations.
    Configuration and coding is required for the output type and the program behind it. There are several std FUnction Modules that can be used for this.
    Hope this helps.
    Mankai

  • Create Oracle USER Account from Third Party System

    Hi there
    We have requirment to create Oracle USER Account through third party system.
    How can we achive this?
    I know ORacle Provide FND_USER_PKG.CREATEUSER API to create user
    Is there any special thing we have to do to create Oracle USER from another system?
    Thanks
    ASIM

    Hi,
    Is there any special thing we have to do to create Oracle USER from another system?I believe you need to check the third party manual or contact the vendor for other considerations when creating user accounts from this system.
    For FND_USER_PKG, please see the links referenced in this thread.
    change password of EBS user
    Re: change password of EBS user
    Regards,
    Hussein

  • Item master synchronisation from third party system to SAP

    Hello ,
    I would like to understand how we can desgin flow of data in case of changes in Catalog from third party system to SAP.
    We have implemented Catalog functionality.  Catalog maintained in third party system is accessed from SAP for procurement through catalog button.
    Now we want to update SAP contracts when ever there is change in prices in third party system. In this we are also validating currency,UOM, delivery time etc.
    How does we can make this synchronisation? What are the possible solution for this?
    You valuable inputs will be highly appreciable.
    Regards,
    Prashant

    Hi Neetu
    you have to mainatin Item text and not for material PO text...
    Do these settings:
    SPRO->MM->Purchasing->PO->Texts for POs--->Define copying rule for item texts..
    then check you should have a entry for "Item Text" if not then
    Put a Consec no. and against it enter item text. then for this you have to maintain text linkage where u should have source object as Purchase requisition.
    please confirm if these settings are already there?
    regrds
    yogesh

  • Return to depot - original order from third party location to customer

    Hi,
    A return order has been configured for materials which have originally gone from third party location to customer location. During return process however the material is coming back to the depot, not the third party location. Now while trying to create an excise invoice after posting goods issue, the material is not showing in the list of excisable commodities. Please suggest a solution.
    Thanks,
    Kasturi

    There is no concept called third party returns in standard SAP.  Check this link where the same topic was discussed
    [Re: Return Of goods in Third Party Process|Re: Return Of goods in Third Party Process]
    thanks
    G. Lakshmipathi

  • DMS document migration from Third Party DMS server(Omnidocs)

    HI guys,
    I would like to migrate document from Third party DMS server to  sap DMS server.
    What is the apporach.
    1. The thir party dms server is protected with login name and password.
    How i can extract data from the software.
    Please spread your thoughts on this.
    what is the function module to  download the contents of the server. by passing the url.
    with regards
    Giri

    use ALE scenario to send the documents

  • Availability check in third party sales

    Hi SD Gurus,
    I have configured third party sales scenario.
    I have an issue. When I create sales order for the customer the system goes into availability check before creating the Purchase Requisition.  Should the system go into availability check for third party sales scenario as at schedule line category level i.e CS availability check is disabled .
    Please provide your suggestions.  Thx in advance.
    Jayant

    I have one more query.. On doing the MIGO after the Purchase Order is created should the stock increase for the receiving plant in MMBE.. I have checked and it is not getting increased.. Please let me know if the stock should get increased or not..
    Please answer the above 2 queries :
    1)  Related to the availability check in third party sales.
    2)  Second related to MIGO in third party sales.
    Thanks
    Jayant

  • Incoming invoice from third party system

    Hi All,
    Could you please help in choosing functional module or bapi or badi's for incoming invoices that are receiving from third party system. I have no ideal about that but the SAP has to be loaded using idocs. what is the reason to choose the above ones
    Thanks in advance for response.

    Why not starting with docu?
    The general process  is explained well in help.sap.com
    As a service, put this into your Google: vendor invoice edi site:help.sap.com

  • Help me!    How to use it as a web service from third party application?

    After using JDeveloper to develop BSSV object e.g. JP550010, how to use it as a web service from third party application?
    TKS！

    Obviously the OP is working on a project for the Bead Society of Southeastern Virginia http://www.bssv.org. Oh, wait, maybe he's researching the Blueberry Shoestring Plant Virus http://abbreviations.yourdictionary.com/bssv
    :D
    John

  • I bought a macbook air and iMac from third party with preinstalled ilife and iworks

    I bought a macbook air and iMac from third party with preinstalled ilife and iworks, can I update to the latest ilife and iworks without being charged even though i did not purchase ilife and iworks on my preowned Macs.  I have no CD's or license for those products?
    thanks

    No, you will not be able to do that.

  • Re : Availability check in third party

    Hi
          While creating sales order for third party scenatio a availability check is automatically carried out. But for noraml sales processes if stock is there it does nor check availability. I want to know how to avoid the availability check in third-party scenario. I checked BANS and NORM. Item category(TAN and TAS) also i checked. I coun't found any changes.
    How to solve this.
    Thanks Anto

    Dear Antony,
    Availability Check in Sale order will be controlled in the sale order by the following..
    1. You can control the Availabilty check in sale order by means of the Requirement Class
    2. You cn fine tune (i.e., either you want to Switch ON it or OFF) the Availability Check in Sale order by using Schedule line Category.
    Rquirement Class: TCode : OVZG
    Here you do need to check the indicator AvC(Availability Check). If you checked this indicator which will carry out Availability check in Sale order.
    Rquirement Type will be assigned to Requirement Class using the transaction OVZH.
    You can find out which requirement type has been used in Sale order - in Procurement Tab at Overview screen.
    In VOV6(Schedule line Configuration) - there will be an indicator Availability check. This indicator will be used either to Switch ON/OFF Availability Check in Sale Order.
    Ex:
    Say in Req. Class - you have checked the AvC indicator, but for your schedule line you do not check the Availiability check indicator - then you can not carry out Availability Check in Sale Order.
    i.e,Availability Check box should be checked in both places. Then only, you can carry out Availability check in Sale order.
    In your case, it must be checked in either of the above mentioned palces.
    Because, then only you can carry out Availability Check in Sale order..
    Hope it may help you.
    Thanks,
    Venkatesh.S.P

Maybe you are looking for