Inventory Stock Locator Issue

Hello all,
I am New to Inventory,
I have created Stock Locator Key FF ( R12.1.3) and compiled successfully. I am facing Issue while enter the Stock Locator in Inventory I got below error.
APP-FND-00914: Required flexfield segment is empty but not displayed
Cause: A required segment of this flexfield is blank, but the segment is not displayed and thus cannot be entered.
Action: Exit the flexfield using the [Exit] key. Contact your support representative.
Action: Exit the flexfield using the [Exit] key. Change the value set of the non-displayed required segment to not be required, or add a valid default value for the non-displayed required segment.
Action: Exit the flexfield using the [Exit] key. Change the flexfield routine calls in your form so that the non-displayed required segment is displayed.
Please enter a value for the parameter or segment Project.
Please guide me to resolve this issue.
Thanks and Regards,
Muthu

Hi Sandeep,
Thanks for your reply,
I tried in both below navigation screen for creating Stock Locator, but same errors are appearing.
Inventory > Setup > Organizations > Subinventories > Locators
Inventory > Setup > Organizations > Stock Locators
Note: While clicking Locator LOV, three fields are appearing in Stock Locator form. ie Row, Rack and Bin (all are mandatory (Yellow Color filed)). In Vision instance also three fields are appearing in Stock Locator form. But only Row and Rack are mandatory field (Yellow Color field), Bin is not mandatory (While color field) FYI.
Thanks and Regards,
Muthu

Similar Messages

  • BW:Inventory stock Report issue based on Vendor and PO number

    Dear Guru's.
    Requirement is to report different inventory  stock's (Total Stock, blocked stock, stock in transit..etc) based on plant, material, storage location, vendor and purchase order in BW.
    For Example:
    Plant
    material
    Stock in Transit
    Total Stock
    1000
    50000001
    0,00
    100kg
    1000
    50000002
    500kg
    600kg
    If we drag the Vendor or Purchase Order Number into the report, Data gets Splitted into +ve (Inflow) and -Ve(Outflow) values.
    For Example:
    Plant
    material
    Vendor
    Purchase Order
    Stock in Transit
    Total Stock
    1000
    50000001
    54545
    567896
    +300 kg
    +400kg
    1000
    50000001
    -300kg
    -300kg
    1000
    50000002
    54549
    567899
    +900kg
    +800kg
    1000
    50000002
    -400kg
    -200kg
    I Think this is because no vendor assigned to outflow data. this is my guess i don't have much knowledge on MM. i have tried to restrict the keyfig's with stock category, but for most of the vendors or PO 's its unassigned.
    But we need the data in single as follows. can any one suggest me any steps to achieve this in BI or BO.
    Plant
    material
    Vendor
    Purchase Order
    Stock in Transit
    Total Stock
    1000
    50000001
    54545
    567896
    0,00
    100 kg
    1000
    50000002
    54549
    567899
    500 kg
    600kg
    Thanks in Advance,
    Dev

    Hi Sheshu and hi Srinu
    Already tried constant selection but it did not helped, the same keyfigure value is displayed in all the rows.
    that means the total stock value is repeated for all the vendors for a particular material.
    For example:
    Plant
    material
    Vendor
    Purchase Order
    Stock in Transit
    Total Stock
    1000
    50000001
    54545
    567896
    0,00 kg
    +400kg
    1000
    50000001
    54546
    567898
    0,00 kg
    400kg
    1000
    50000001
    0,00 kg
    400kg
    1000
    50000002
    54549
    567899
    +900kg
    +800kg
    1000
    50000002
    + 900 kg
    + 800 kg
    Regarding the BO settings, i need to try it.
    Any more suggestions will be much more helpful.
    Thanks and Regards, Sri

  • Oracle Inventory Stock Location in a Subinventory - Locators vs DFF

    Has anyone covered the topic of options for recording the location of an item in a subinventory when the business has a clear rule that an item in a subinventory will only ever exist in one location?
    The functionality in Oracle inventory for locators suggests it is for multiple stock locations in a subinventory.  Using it when applying the above business rule of only one locator per item per subinventory seems to require a lot of data maintenance and transaction data entry for the purposes of being able to identify which asile, row, shelve an item is located at.
    Has anyone provided such a discussion before on the pros and cons of using locators when an item will only exist in one location within a subinventory vs the use of a DFF field on the item/subinventory record to be used for reporting and lookup purposes for location information?

    Why dont you use Item-subinventory restriction?
    Thanks,
    Hrishi

  • Inventory Stock movement issue

    hi gurus,
    can anyone provide me the query for the inventory stock movement..
    here is the my requirement
    Period: ex Jan-2011
    opening_balance , Total issued, Total Received and closing balance.
    Thank you..

    Hi Arun.......
    Please run Inventory Audit Report. There you will get the Item cost of material as per FIFO Layer....
    Its in Inventory> Inventory Reports>Inventory Audit Reports
    Regards,
    Rahul

  • Stock locator question

    hi folks,
    we have a six-segment inventory stock locator defined in KFF. we have a need to use a combination of the first 4 in some of our inventory organizations, and all 6 in the rest. is it possible to achieve this?
    thanks and regards.

    As long as the KFF does not have the 6 segments as mandatory, you can certainly create locators with just 4 segments.
    And even if it is mandatory, you can create the locators with segment5 and 6 with a default value (such as Z, 0 etc.)
    Hope this answers your question,
    Sandeep Gandhi

  • Unrestricted Stock of issuing Storage Location in reservation

    Hi Experts,
    We have a requirement, we want that unresticted stock of issuing storage location is printed on reservation (MB23) Thru MB25.
    How it is possible.
    Kindly help me out, can we use sqvi or something else.
    Regards
    GR

    HI ,
    Just Modify this Report with the help of a Abaper and ask him to add an additional column in the report that is the Stock in the unrestricted use for this Material and Plant
    combination.
    TO achieve the Since we know the Material ,plant and storage location
    PIck up the Material Number --RESB-MATNR
    the Plant code --RESB-WERKS
    the storage LOcation--RESB-LGORT
    Go to Table RESB table in this table against the Feilds RSNUM -Reservation NUmber and RSPOS( Reservation item number)
    IN some cases the storage location would not be entered by the user ,take care ,he enters the storage location by every user ,so make it mandatory in the screen layout.
    After Picking up all the three values ,pass those values in the Table.
    MARD line item vise present in the reservation (maintain a loop for the same)
    in this table pick up value in the Feild MARD-LABST which is the stock in the unrestricted use.
    one thing ,i dont know the exact requiremnet ,but it is to resrict the user from creation of reservation more than the stock ,it can be done by avaliability check.
    hope so it helps
    Regards
    Anjanna.

  • Updating segment1 (stock locator) in MTL_ITEM_LOCATIONS table

    Hi guys,
    We need to update stock locators for our Turkish character issue. We want to change the characters.
    Is there any way to update segment1 in MTL_ITEM_LOCATIONS?
    Is there any custom API that updates sub inventory name and stock locator code?
    Any help would be appreciated.
    Thanks

    Hi
    Please find sample data in excel sheet. But this sheet does not contain 'not null' column values.
    S.No     Subinventory     Floor     Racks/Line     Shelf     Sequential Location     
    1     HA     1     01     01     01          
    2     HA     1     01     01     02          
    3     HA     1     01     01     03          
    Regards

  • Write-off the MM inventory stock

    Dear expert,
    I want write-off the MM inventory stock which is expired, please give the step & procedure.
    Regards,
    PK

    Dear Learn New,
    PI Process -
    Creation of Physical Inv Doc by MI01
    Entering ZERO COUNT (Tick of ZC Box in PI Document by T CD - MI04
    and posting the document by MI07 (individual document) or MI20( List of documents)
    System will adjust inventory automatically by 702 movement type as a issue and financial impact will be in Loss Account as loss due to Physical imbalance in stock.
    You can alternatively withdraw stock for Scrapping by movement type 551.
    Thanks
    Raghavan

  • Physical Inventory stock Excess/Short excise capture in steps plz

    Dear Gurus,
    Pls guide me step by step excise capture for physical inventory stock for raw material and finished material.
    Kindly give the steps till register extraction.
    regards,
    Kumar

    Hi Kumar
    Welcome to SCN forum
    Please refer this link which may help you
    EXCISE CAPTURE AND POSTING
    NOTE: Before posting any issue, kindly search in the forum
    Regards
    Srinath

  • Why can not freeze book inventory Storage location and Posting block?

    Hello,
    I tried to freeze book inventory storage location and posting block at storage location level in SAP.
    1) OMBP -> "Freeze book inventory storage' is checked at that storage location.
    2) MI01 -> the 'Posting Block' and 'Freeze book inventory' in the Physical Inventory Document  is checked.
    3) Post the Physical Inventory Document by using MI02.
    But, I am still able to post inventory movement at that storage location after executing the above.
    (I run MB1C with movement type 501 at that location.
    I input the material number which are in the created Physical Inventory document.
    The posted manterial document is created after I run MB1C.
       The document date and the posting date in MB1C are the same date of Physical Inventoery Document.
    I can see this material inventory movement from MB51!! )
    My question is:  Why SAP is allowed to execute the inventory movement after the 'freeze book inventory storage location' and 'Posting block' are checked at OMBP and MI01 ?
    Any idea?
    Help me, thank you.
    Regards,
    Sylvia Chen

    Problem solved.  Thank you for all help!!

  • Material document ,quantity and stock location for a given material

    hello all,
    i have a requirement like this.
    in the selection screen i have,
    material.....
    plant....
    posting document date.....
    i need to get material document number,quantity,units and stock location for the above mentioned selection criteria...
    what tables do i need to use..
    do i need to use any BAPI or Function module..
    thanks in advance...

    Hi Vinay ,
    Look into table MKPF & MSEG for material document
    anf for quantity in MARD
    Regards
    Yogendra Bhaskar

  • Unit of measure for stock , Goods issue , Purchase.

    Dear All Experts,
    How we can maintain different unit of measure for Stock, Goods Issue, Purchase?
    Regards,
    Sandeep.

    Hi,
    The UOM qualifies the quantity you enter on the
    purchase order line. This will default in if you entered an item number, if not enter
    a UOM of your choice using the List of Values.
    Please Refer the following links...hope it helps you....
    http://help.sap.com/saphelp_45b/helpdata/en/c6/f83bb94afa11d182b90000e829fbfe/content.htm
    http://www.admin.cam.ac.uk/offices/finance/training/manuals/inv_training_stores_user.pdf
    Regards,
    Udaya.

  • Adobe Reader X save location issue

    Hi All, i would like to seek expert helps on Adobe Reader save location issues. After we upgrade from Adobe Reader 9 to Adobe Reader X.
    There are changes on how save location works in Adobe Reader X
    If save PDF via Internet Explorer – the save location will according to last save location, HOWEVER
    If save PDF via Adobe Reader X – the save location will set according to location the file is being open
    Let me show you what i mean over the pictures
    I open a reader_X_help.pdf using Adobe Reader X and then save the file using Ctrl+Shift+S at: C:\Users\xxxx\Documents\My last location save
    refer my last save location.jpg
    Now i want to save another new file back to C:\Users\xxxx\Documents\My last location save, I open the file Adobe file2.pdf located at desktop and when i do Ctrl+Shift+S, the location point to my desktop and not C:\Users\xxxx\Documents\My last location save
    refer my last save location change to desktop.jpg
    I have tested this features in Adobe Reader 9 and it's different whereby it's will point according to my last location save.
    There is no issue with computer as i have 3 machine running different enviroment, Windows XP SP3, Windows 7 Enterprise, and all using same version of Adobe Reader X version 10.0.1.
    So my questions & concern:
    Is there any way to change the save location features same as Adobe Reader 9?
    If YES, how to do it? By Computer Changes or Adobe Reader X packages modification using Adobe Customization tools?
    If NO, Where can i find this source of documentation stated about this new changes so i can publish this information in HP website as new design changes to avoid complaint or negative feedback.
    Looking forward for expert reply as soon.
    Thank you very much and Have a great day.
    Best Regards
    Edmund Lau
    [email address removed by host]

    Solved it!
    1-go to "edit", select Preferences.
    2-select from the left pane: Security (enhanced)
    3-click on "add folder path" button just below the big white box
    4-pick a folder of your choice and click "ok". (your selected folder path will appear in that white box above the "add folder path" button in step 3)
    5-if you want to add additional folders, just repeat steps 3 & 4
    6-once you are done, click "ok" on the preferences screen and click "ok" again to accept the changes.
    Yes, it seems illogical, but it worked.
    I tested by closing the Reader (X), then surfed the web and did what Neher5 was explaining he/she wanted to do just after opening a pdf from a website and lo-and-behold,  it worked!. No more "save to temp folder" issues.
    Hope this helps.

  • Problem with Inventory stock audit Report in other currency

    Hi I have a problem with Inventory stock audit, the SBO show me the report in local currency, and I have to obtain that report in other currency, I was working with OINM table, but I don't know how obtain the report

    Alberto,
    Other currency information is available at the document row level and in the Journal Entries.
    What you could do is join the OINM with the associated document and let the foriegn currency value.
    OINM.TransType = ObjType (marketing document)
    OINM.BASE_REF .......Document Ref
    OINM.DocLineNum ......LineNum
    Suda

  • Inventory Stock Aging Report

    Hi All.
    I need Inventory Stock Quantity wise aging report from sap b1 sp 00 pl 47 .
    0-30, 31-60,61-90 and above 90
    Regards,
    Haider

    Check below link tooo
    Re: Stock Aging report in SAP Business One
    Re: Inventory Aging Report
    Stock Aging Report
    and this toooo
    SELECT distinct T0.ITEMCODE, T1.itemName,T0.ONHAND as 'Total Qty', T1.ManBtchNum,T1.ManSerNum,
    CASE WHEN Datediff (day,T1.LastPurDat, Getdate ()) <45 THEN T0.ONHAND END '<45 Days (Qty)',
    CASE WHEN Datediff (day,T1.LastPurDat, Getdate ()) <45 THEN T0.ONHAND * T0.Avgprice END  '<45 Days (Value)',
    CASE WHEN Datediff (day,T1.LastPurDat, Getdate ())>45 AND Datediff (day,T1.LastPurDat, Getdate ()) <90 THEN T0.ONHAND END '<45 T0 90 Days (Qty)',
    CASE WHEN Datediff (day,T1.LastPurDat, Getdate ())>45 AND Datediff (day,T1.LastPurDat, Getdate ()) <90 THEN T0.ONHAND * T0.Avgprice END  '<45 T0 90 Days (Value)',
    CASE WHEN Datediff (day,T1.LastPurDat, Getdate ()) >90 THEN T0.ONHAND END '>90 Days (Qty)',
    CASE WHEN Datediff (day,T1.LastPurDat, Getdate ())>90 THEN T0.ONHAND * T0.Avgprice END  '>90 Days (Value)'
    FROM OITW T0 INNER JOIN OITM T1 ON T0.ITEMCODE = T1.ITEMCODE
    INNER JOIN OITB T2 ON T1.ITMSGRPCOD=T2.ITMSGRPCOD
    left join ibt1 t3 on t3.itemcode = t0.whscode
    WHERE T0.ONHAND >0 AND T0.WhsCode = '[%0]' AND T2.ItmsGrpNam ='[%1]'

Maybe you are looking for