Stock locator question

hi folks,
we have a six-segment inventory stock locator defined in KFF. we have a need to use a combination of the first 4 in some of our inventory organizations, and all 6 in the rest. is it possible to achieve this?
thanks and regards.

As long as the KFF does not have the 6 segments as mandatory, you can certainly create locators with just 4 segments.
And even if it is mandatory, you can create the locators with segment5 and 6 with a default value (such as Z, 0 etc.)
Hope this answers your question,
Sandeep Gandhi

Similar Messages

  • Material document ,quantity and stock location for a given material

    hello all,
    i have a requirement like this.
    in the selection screen i have,
    material.....
    plant....
    posting document date.....
    i need to get material document number,quantity,units and stock location for the above mentioned selection criteria...
    what tables do i need to use..
    do i need to use any BAPI or Function module..
    thanks in advance...

    Hi Vinay ,
    Look into table MKPF & MSEG for material document
    anf for quantity in MARD
    Regards
    Yogendra Bhaskar

  • Oracle Inventory Stock Location in a Subinventory - Locators vs DFF

    Has anyone covered the topic of options for recording the location of an item in a subinventory when the business has a clear rule that an item in a subinventory will only ever exist in one location?
    The functionality in Oracle inventory for locators suggests it is for multiple stock locations in a subinventory.  Using it when applying the above business rule of only one locator per item per subinventory seems to require a lot of data maintenance and transaction data entry for the purposes of being able to identify which asile, row, shelve an item is located at.
    Has anyone provided such a discussion before on the pros and cons of using locators when an item will only exist in one location within a subinventory vs the use of a DFF field on the item/subinventory record to be used for reporting and lookup purposes for location information?

    Why dont you use Item-subinventory restriction?
    Thanks,
    Hrishi

  • Inventory Stock Locator Issue

    Hello all,
    I am New to Inventory,
    I have created Stock Locator Key FF ( R12.1.3) and compiled successfully. I am facing Issue while enter the Stock Locator in Inventory I got below error.
    APP-FND-00914: Required flexfield segment is empty but not displayed
    Cause: A required segment of this flexfield is blank, but the segment is not displayed and thus cannot be entered.
    Action: Exit the flexfield using the [Exit] key. Contact your support representative.
    Action: Exit the flexfield using the [Exit] key. Change the value set of the non-displayed required segment to not be required, or add a valid default value for the non-displayed required segment.
    Action: Exit the flexfield using the [Exit] key. Change the flexfield routine calls in your form so that the non-displayed required segment is displayed.
    Please enter a value for the parameter or segment Project.
    Please guide me to resolve this issue.
    Thanks and Regards,
    Muthu

    Hi Sandeep,
    Thanks for your reply,
    I tried in both below navigation screen for creating Stock Locator, but same errors are appearing.
    Inventory > Setup > Organizations > Subinventories > Locators
    Inventory > Setup > Organizations > Stock Locators
    Note: While clicking Locator LOV, three fields are appearing in Stock Locator form. ie Row, Rack and Bin (all are mandatory (Yellow Color filed)). In Vision instance also three fields are appearing in Stock Locator form. But only Row and Rack are mandatory field (Yellow Color field), Bin is not mandatory (While color field) FYI.
    Thanks and Regards,
    Muthu

  • Updating segment1 (stock locator) in MTL_ITEM_LOCATIONS table

    Hi guys,
    We need to update stock locators for our Turkish character issue. We want to change the characters.
    Is there any way to update segment1 in MTL_ITEM_LOCATIONS?
    Is there any custom API that updates sub inventory name and stock locator code?
    Any help would be appreciated.
    Thanks

    Hi
    Please find sample data in excel sheet. But this sheet does not contain 'not null' column values.
    S.No     Subinventory     Floor     Racks/Line     Shelf     Sequential Location     
    1     HA     1     01     01     01          
    2     HA     1     01     01     02          
    3     HA     1     01     01     03          
    Regards

  • IPhoto library Location Question

    Hello Apple Discussion wizards, though this is my first post, i've used this forum extensively and you have all helped me with many problems.
    Anyway, old macbook was killed by humidity, currently on new imac.
    old iphoto library was recovered and loaded to an external. my new iphoto library had around 300 pics, old one had around 12000, all organized by albums and such, so naturally i wanted to move the new iphoto library photos into my old one, and make my old library the default on my new computer.
    essentially, i dragged the files from my old iphoto onto the desktop, held option while i opened iphoto, seleected the old library, then dragged the 300 pics into it.
    now, currently iphoto opens with all my pics. the library location is
    /Users/claycohen/Pictures/iPhotoLibrary1
    everything seems cool, but im worried about the location/permissions of the library
    for example, if i go to change my desktop photo in system prefs, when i browse finder, my iPhotoLibrary1 is greyed out and cant be selected.
    MAIN QUESTION:
    Is there a way to reset my current library to factory location and settings but keep all my albums/photos etc?
    thanks for your help everyone, if that didn't make sense i can try to re explain. to quote thom yorke - i just want "everything in its right place"

    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair Library permissions.
    Regards
    TD

  • Storage location question

    Hi, All,
    Do I need to maintain storage location for materials in material master data?
    Which view or which functionality must maintain storage location in the material master data? Is it mandatory?
    If I donu2019t maintain storage location, just plant. When I create purchase order, I donu2019t put storage location, but do goods receipt, I must input storage location, right? Can I put any storage location which belongs to that procurement plant, is it ok?
    Another question is about Is there any T-code or way to check which plant, which storage location maintaing in the specific material?
    Thanks in advance,

    Do I need to maintain storage location for materials in material master data?
    not neccessary but depends on the requirement of you rbussiness.
    Which view or which functionality must maintain storage location in the material master data? Is it mandatory?
    No it is not plant/storage loc 1 and 2 view
    If I donu2019t maintain storage location, just plant. When I create purchase order, I donu2019t put storage location, but do goods receipt, I must input storage location, right? Can I put any storage location which belongs to that procurement plant, is it ok?
    Yes you can put any belongs to the same plant but if in the config the create storage location automatiocally is configure than you can do that (transction OMB3)
    Another question is about Is there any T-code or way to check which plant, which storage location maintaing in the specific material?
    Yes, you can check MMSC OR in detail view
    go to transction SE16 or SE16N and enter the table MARD
    now enter you mateiral and you can view all the available plant and Sloc
    you can write query also using this table

  • KANBAN Stock Transfer Question.

    Hi All,
    I am using kanban stock transfer stratergy(Mvmt type -311) to transfer my stock from one Sloc to another Sloc. I have given one fixed quantity and everytime that quantity is tranferred between sloc's. Now, My question is can give a tolerance limit to that kanban Quantity.
    For example, If my kanban quantity is 500 Pc's can I provide a tolerance limit of 10% so that I can transfer the stock anywhere between 450 and 550. Please let me know if this functionality is possible.
    Thanks in advance,
    Sushil

    Hi,
    As per standard SAP Practice , there is no provision of adding tolerance to Kanban Qty but you can replenish 450 /550 by manually editing the Kanban quantity in Kanban Correction.You can do Kanban correction in PK31n or directly by right click & selecting Kanban correction in Kanban Board screen.
    Other way is you can use Event driven Kanban for one time replenishment of 450/550 so that you need not disturb the main Control cycle of Classical Kanban.
    Even as per my knowledge, there is no BADI for Kanban which can help your requirement.So pls try above.
    Hope this helps.
    Revert if still any doubt.
    Regards,
    Tejas

  • Rendering Lo-Res files for inspection by stock agency questions.

    *Using FCE 4.* My stock photo agency is requesting videos now. I'm using a Canon 5D Mark II.
    What I want to do is to render low-resolution clips for the agency inspection. They will choose from the LR clips and I will then supply HR files for submission.
    I have been trying to render the lowest possible resolution files for submission and the files are ending up mostly rendered without audio. I'm sure it's something simple I'm missing but I can't seem to drink enough coffee to absorb what I'm missing from the digital manual or Tom Wolsky's book.
    That would be two questions: what settings will give me the lowest possible file size for agency inspection and how do I make sure the audio is included in the rendered LR files?
    I appreciate any help on this and I hope to bring my skill level up quickly over the next couple of months. Now I know how Photoshop beginners feel. I grew up with PS but video is a whole new world for me.
    Fred

    Bonjour (Hi)!
    (I assume that the audio is enabled in your sequence)
    So your sequence is an HD one.
    _FOR DATA DV or HARD DRIVE ARCHIVE_, same process (altough you can keep the original 1920X1080 for hard drive way):
    The simplest way is to export the sequence with the correct aspect ratio (16:9) to a smaller frame size.
    1920X1080 gives a such ratio as 640X360.
    To reduce your frame size to 640X320, no other choice than using "export->using quicktime conversion" in file menu.
    In the Save window dialog, choose "Quicktime movie" in the local format menu. Click on Options to get access to desired settings like frame size, codec, etc.
    In *Movie settings window* :
    For video: click settings to open the *Standard video compression setting window* and choose the codec (here MPEG 4) in Compression local menu (there is a selector for compressor quality, maximum data rate.
    Click OK to confirm the codec choice for video in *Standard video compression setting window*.
    In *Movie settings window* select Size to get access to *Export size settings* window. There are some presets included but you can enter custom values here. Set frame dimension as you need, but keep in mind to choose numbers that have a 16:9 ratio like 640X320 or other one.
    Desinterlace is a good option if your work with interlaced source material.
    Click OK to confirm the frame size for video in *Export size settings* window.
    For audio: click settings to get access to *Sound settings* window and choose the audio codec etc, Linear PCM at 48 kHz stereo give your the best audio from FCE. As you distribute on DATA DVD or hard drive, audio size is not an issue here.
    Confirm the codec choice with OK key in *Sound settings* window.
    Confirm the video and audio setting by clicking OK in the *Movie settings* window.
    In the Save window, name the exported movie, select a destination to save and click Save.
    The resulting file will a compressed one with all option selected. This movie is suitable for DATA DVD burning or Hard drive usage.
    TIP: There is some compression presets included in the Save window at format local menu. iPhone or Apple TV are efficient ones.
    Look at those links about video compression:
    http://www.kenstone.net/fcphomepage/qt_h-264_moviesfcp.html
    http://www.kenstone.net/fcphomepage/qt_movies_fromfcp.html
    http://www.kenstone.net/fcphomepage/video_to_ipodstone.html
    To produce a _STANDARD DEFINITION WIDESCREEN DVD_:
    Simply use the export-->quicktime movie in file menu. Select audio and video content in the Save window local menu. Check "self contained" and a destination for the movie.
    To authoring the DVD, you can use iDVD:
    there is an issue with wide screen content, see:
    http://www.fcpbook.com/Video9.html
    The other way to resolve this problem is to use Quicktime player PRO, open your wide screen exported movie and set the correct *Aperture playback* option for video track in Movie properties window (use Command-J to get this window in quicktime player PRO). Save the new version of the movie once this option selected.
    Drag your exported movie in a *wide screen iDVD project* and burn your project. iDVD will handle the frame size reduction and the compression for DVD usage. You don't have to choose option here.
    Or
    Use Roxio Toast, or Compressor if you own it (included with Final Cut Studio 2).
    The resulting DVD will be a *Standard definition wide screen* one (720X480). IMO, it's not the better way to go for material screening by agency as this DVD will have to be played with DVD player application from a computer or with a DVD player hooked on a TV set.
    NB: To burn a Blu-Ray DVD you can use Roxio Toast with the correct Roxio plugin, but it' difficult to get a BR DVD burner right now. You can use standard def DVD blank to get a BR of 20 minutes in lenght. Search this forum with "Toast Blu-Ray DVD keywords.
    Michel Boissonneault

  • OracleInventory directory location question

    During installation of any Fusion Middleware component for a fresh install,
    the installer asks for home directory for oracleInventory
    and once entered the installation proceeds.
    Please confirm if following is true
    1. This oracleInventory directory is used to keep log of the installs
    However, after deinstall and re-installing, the installer does not ask for
    oracleInventory directory. It uses the one previously used.
    2. Question: How does or where does the installer record the home directory for
    oracleInventory
    3. Question: If one were to chane this directory location for oracleInventory, for a fresh install,
    then how to guide the installer to use ask for a new location for oracleInventory?
    4. Question: Is it ok to delete the oracleInventory directory after an install is completed?
    Or would it affect normal operation of the installed product?

    I suppose it’s done to your individual requirement. There’s no reason why you can’t. We keep them on a different disk, but because of our daily SOCS checks and GRID notification email, we know when it’s getting full/etc

  • Zone path location question

    I am rebuilding our Zone hosting server and the Zone paths are currently located on the SAN through an iscsi mount. My question is: If I plan to use Live Upgrade should the zone paths be in the root partition instead?
    Also, if you have any suggestions about using Live upgrade with non-global zones I would like to hear them as well.
    Thanks,
    Dave

    Which file system you are using?
    I have patched several guest ldoms running several zones with Live Upgrade. Every zone's zroot is on separate zpool (because of HA). This way it is quite easy to migrate a single zone to second node (in the event of disaster)
    One thing that you should remember is that Live Upgrade with ZFS does the patching by using ZFS snapshot. For example, if you do the patching to a live system (which is supported with Live Upgrade!) and the application running on the zone is storing its data on the same file system where zone's root is, the application's data might be out of date after you reboot the machine using the new BE that was created by Live Upgrade.

  • Common Functional Location Question

    Hi
    In my Clients senario there are many functional locations. Now in his functional locations the work is carried out by various Maintenace Groups like ELE / MEC / INST.
    All these Departments have there Own Work Centres & Cost Centres. Now the problem is
    1. What costcentre is to be maintained in functiona location master. ( Coz order are created on these common functional locations) what does SAP Recomends.
    2. The requirements is that if Electrical Depatment creates an Order on these locations then the Cost to be captured in Electrical department cost centre similarly for other departments.
    regards
    Sabyasachi

    Hi Pete
    I went across some of the customer sites, where they are using SAP PM....
    According to the Question of this thread...
    They dont have different cost center or work center... they have only one cost center and one Work center...
    All the maintenance cost (ELE,MECH or INST) will be clubbed into one Cost center and it is assigned to the G/L accoutn....
    Work center also common.... Since its all internal cost comes from the work center for the employees.. they said... the cost is common for all..
    But... this scenario is different from others.. like Separate cost center or work center...
    Once the notification is created... the person.. should know, who is gonna take the job... if its mech or elec or both... there is a issue in criticality of the work ur gonna take.. if its a shaft problem.. then its purely mech.. if its motor problem its elect... even though both the depts have work.. but some one will have high criticality... he has to use the particular work center.,,,
    Then in the order... u need to enter the operations with different work centers... so u will be getting the cost of both the work center...
    For equipment, i think one cost center is enough.. since it will take all the cost... sinc ein one order u cannot give two or three cost centers... am i rite....
    - Pithan

  • WiFi router location question.

    When you move your wifi router and it shows the old address how does it learn the new address. Can you speed up the process or does it just take time ?
    See also a similar question to help another person. Thank you. Happy New Year.
    Hi, I have recently moved home and changed my details in my Apple ID but when using find friends or the maps app I am still located at my previous address, can you help ?

    If you have the WiFi-only iPad (which does not have GPS) your location is determined by the mapped location of nearby WiFi routers.
    Without GPS location-finding is done by using a Apple location database which contains the MAC addresses of routers and their physical location. A MAC address is a unique number which is built-in to all network devices when manufactured.
    The Apple database is built and updated by Apple GPS-enabled devices (primarily iPhones) actually seeing routers and then adding/updating the router's locations into the database. Apple does not provide an user-accessible interface to manually update the database.
    Note that to be used for location determination, a device does not need to be actually connected to a router, it just has to see the router. More precise location determination can be done if several nearby routers can be seen. When a router is moved from one location to another erroneous locations can sometimes be reported until the router's location is corrected in Apple's database.

  • Family Locator Question

    Is there any way to stop the automatic text message to the phone that is being located with family locator? I would rather not have my kids know that I am wondering where they are.

        Bergybox, family locator is such a great monitoring tool for children. I understand why you wouldn't want them to know when they are being located. Due to privacy laws, we have to notify the user of that phone that they are being located. You can set the option to notify them without requiring their consent, but they still have to be alerted.
    Let me know if you have further questions on Family Locator.
    MarquiaF_VZW
    Follow us on Twitter @VZWSupport

  • Artwork location question

    I have a couple questions about artwork.
    For a lot of them I can't find artwork from the iTunes store, so I'm adding it manually. I save pictures to my desktop and drag them to the artwork window.
    My question is, where does iTunes store the picture files for artwork? I want to delete the pictures from my computer once I add them to the songs so I can conserve disk space. I'm afraid once I delete them from the computer or move them to a different location that they'll no longer be seen in iTunes. Is this the case? I don't want to lose all the work I have to do, because I have over 650 albums represented in my library.
    Dell Inspiron 8600   Windows XP  

    The artwork is copied to a directory under your iTunes Music directory (My Documents\My Music\iTunes\Album Artwork.
    You can safely delete the artwork files from your desktop.

Maybe you are looking for