Invite Template for WebEx TelePresence Meetings (TMSXE)

Hello,
We are working on deploying WebEx Enabled TelePresence and TMSXE to our environment. Everything is working as expected, however I am having some frustrations with the email templates. When scheduling with Smart Scheduler you get the booking invite HTML template from TMS. However, when booking from the WebEx Productivity Tools (the new one that works with WeT and TMSXE) it loads the invite with the booking invite plain text version from TMS. I have looked everywhere and the only thing I have found is under Coniguration in TMS, email settings, set Email Content Type to HTML instead of both (multipart). However, this still doesn't seem to force the invite to be HTML instead of Plain Text. If anyone has some insight into this, I would greatly appreciate it.
TC

Hi Tim,
This community is observed by Cisco WebEx Meetings Server (on premise) and Cisco Unified MeetingPlace experts. None of these products integrate with TelePresence, so we won't be able to assist you. I advise you either post this question in TelePresence community which is observed by TelePresence experts, or reach out to Cisco WebEx Support directly (1.866.229.3239) to get answers about WebEx E-mail templates and possible solution.
I hope this will be of help.
-Dejan

Similar Messages

Cisco Jabber for Telepresence 4.6.3 Setting for "Webex Telepresence" Cloud Service

I am looking for the server setting that can be installed into the Cisco Jabber for Telepresence Client (MOVI) that will allow it to connect to the "Webex Telepresence" cloud service. I cannot find a download anywhere that has the infomation re-configured for the "Webex Telepresence" service.
Thanks for your help in advance
Tim
Well after a few hours of searching i have the Answer
The Client can be downloaded from: http://download.telepresence.webex.com/MCX/4.6.3.17194/WIN/JabberVideo_4.6.3GA.exe
This will come with the following setting pre-configured: Sign-in Setting > Internal Server: https://boot.telepresence.webex.com/tmsagent/api/rest/devices/movi/provisioning
If you have the JabberVideo Client installed and just want to change where it gets provisioned from VCS or Webex Telepresence then you should be able to use your current client and just change the internal server settings and clear the external setting.
Then you will need to use your Webex Telepresence Login ID and Password.
Hope this helps Someone.
Tim
Message was edited by: Timothy Shire

A1: Because it can use either (webex or CUPS), there are two deployment modes, all is on the documentation if you haven't gone thru it.
You type in what it's asking, nothing more. Choose one, and then use the CUPS hostname, DNS is basically mandatory, the PC needs name resolution for all you have configured (VM/CUCM/etc)
A2: No, it can be IM&P, full UC and phone mode. No, Full UC and phone mode use the PC for media termination, deskphone control uses the phone for media. Did you change the parameters during install for phone mode??? If not, it's not in phone mode.
A3: No, that can be many things, DNS, connectivity, credentials, etc
You mention DNS is not used, so, most likely that's the problem.
I'd strongly recommend you to review the whole deployment guide for Jabber for Windows.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Webex Meeting Center and Jabber for Ipad support in Webex Telepresence

Hello, I have a two questions which are unclear based on my browsing of posts in this thread.
1) Are traditional Webex Meeting Center meetings able to be joined to a Webex Telepresence session? Ie. I have two callway/webex telepresence nodes (SX20 and a C40) can they have a webex meeting center participant brought in?
2) Is Jabber for Ipad supported using the Webex Telepresence service? Using the example endpoints above I have a SX20 and C40 and they want to add a Webex for Ipad endpoint in.
Thanks.

You cannot have Telepresence endpoints using Callway service(WebEx TP service) join a webex session directly. You can do this however using WebEx enabled Telepresence which is meant for on-premise users to work with WebEx
http://www.cisco.com/en/US/docs/telepresence/infrastructure/tms/config_guide/webex_enabled_telepresence/cts_webex_config.html
In the call way (aka WebEx tp service), the work around is you have to use an endpoint that has multi site capabilities to make one video call and see video from other end points and then make an audio call to the WebEx service and bridge them together. Now users can audio and video and presentation remains on WebEx but it's not like the true webex enabled telepresence which today call way doesnt support
See attached PDF last page. Also you may need a PSTN subscription to make that call happen

I have an iPad 2 and want to be able to design my own templates for invitations, labels, and such. What do I need to do to be able to do this? Apps??

I have an iPad 2 and want to be able to design my own templates for invitations, labels, and such. What do I need to do to be able to do this? Apps??

Take a look at these three sites and you might find something in one that will work for you.
http://appadvice.com/appnn/2011/06/appguide-updated-vector-drawing-apps-ipad
http://jaevin.com/blog/2011/02/20/ipad-sketching-drawing-apps/
http://www.designer-daily.com/10-great-ipad-applications-for-creative-people-623 4
I downloaded iDraw - which is an Adobe Illustrator wannabe for the iPad. You can export to PDF and other formats using iDraw. iDraw also supports file sharing. File Sharing is the iPad/iTunes way to send files back and forth from the iPad to your computer and back again.
This site will tell you about iDraw.
http://www.indeeo.com/idraw/
This is a link to iOS File Sharing which you will find useful as well.
http://support.apple.com/kb/ht4094
There are third party apps in the app store that will allow you to use virtually any printer even if you don't have one of the HP AirPrint compatible printers.
You can even use an app like Pages to create your templates. You can insert art and photos into Pages and it supports file sharing as well. Pages is a Word Processing app and I would be inclined to not use it for your purposes but it will work for some basic designs however it's certainly not ideal for creating artwork.
http://www.apple.com/ipad/from-the-app-store/pages.html

VCenter is a must for webex meetings server ?

Hi all,
Is vCenter is a must for webex meetings server ?
if I do not have vCenter, is it possible to deploy it?
thanks.

Correct, vCenter is required. No way around it afaik.
Please rate useful posts.

Regarding TelePresence Meetings Scheduling

Hi,
How do we schedule a meeting with TelePresence? Do anyone have a proper document on how to schedule TelePresence meetings with Microsoft Outlook?
The Client is using Microsoft AD /Exchange.
Thanks
Kalesh Kumar

Kalesh:
To schedule a Cisco TelePresence session you use your common enterprise groupware, either Microsoft Exchange or Lotus Notes. You only need to add the Cisco TelePresence room as another resource in your invite (same thing you do today to reserve a room for a non-virtual meeting)
You will need, additionally to the Cisco TelePresence endpoints (CTS-500, CTS-1000, CTS-3000 and/or CTS-3200), the Cisco TelePresence Manager. You will require no client software or plug-ins in order to schedule and automatically launch calls. Instead the Cisco TelePresence Manager acts as a room-scheduling proxy and receives and processes all meeting invitations sent and received in Cisco TelePresence rooms.
The software is designed to make the in-room experience for users as natural and simple as possible, with "one-button-to-push" meeting launch and automatic display of meetings on the in-room IP phone.
You can find Cisco TelePresence Manager's Data Sheet here: http://www.cisco.com/en/US/prod/collateral/ps7060/ps8329/ps8331/ps7074/product_data_sheet0900aecd805455ff.html
Hope it helps!
Mariano

Dynamically set template for Print Quote report

We need to customize "Print Quote" in Quoting
As part of this we will be having 2 custom templates (will be related to data definition "Quote Printing", ASOPRT).
These two templates have to be defaulted based on the quote status - one for status "Approved", and the other template for other non "Approved" statuses.
How can this be achieved dynamically? (OAF CO customization / personilization)
There doesn't seem to be any setup for assigning different templates based on status.
Profile option "ASO: Default Layout Template" can be utilized to change the default template, but we need this template to be defaulted dynamically based on the Quote status.
Thanks,
Sumanth
Edited by: user1131947 on Oct 25, 2011 3:51 AM

If you want to create a custom report using concurrent program then refer:
http://apps2fusion.com/apps/apps/63-xml-publisher-concurrent-program-xmlp
If you want to create a custom report using OAF page then refer:
http://apps2fusion.com/at/51-ps/260-integrating-xml-publisher-and-oa-framework
-Anand

How to use one WAD template for all the available queries

Hi,
I have created a WAD template... Now we have close to 25 queries which will use that template for displaying their output at Portal...
Is there any way that i don`t have to create multiple copies of my WAD template...
I.e. all queries would call that same template through portal...

Hi,
The Bex report uses the Standard Template 0ANALYSIS_PATTERN while it is executed.
So if your sure that the look and feel of all the Reports is going to remain same, you don't need to even attach all these Queries to Templates in WAD.
When you execute the BEx query, it would pick up the standard template and run it in portal.
But if you want to customize the Report Template:
1) You can change this standard template 0ANALYSIS_PATTERN and customize it according to ur requrement in WAD.
2) Or you can create a copy of this standard template and change it as required. Then change the template in spro (transaction RSCUSTV27) to point to this Z template.
Let me know if you need more details.
Regards,
Forum

How to crate a page template for multiple page instances?

Hello,
When I use the Administration Portal to create a page with portlets in the Portal Resource Library, I can choose to use that page it in my portal. The problem is that I can use it only once. How can I crate a page template with portlets so I can use use it as a template for many page instances in one portal?
I'm using Portal 8.1.6.
Regards,
Eirik

Hey Dave, See the image below:

Oracle Sesame Adaptater - missing template for creation of a new SAIL repo.

Hi,
I'm trying to deploy the Sesame Adaptater on my TOMCAT server.
At the point 8.9 of the doc ( http://docs.oracle.com/cd/E18283_01/appdev.112/e11828/sem_sesame.htm#BABFFEFA) I'm suppose to type in the sesame console the following comand :
"create oracle."
I got this error :
ERROR : No template called Oracle found in C:\Users\<Username>\AppData\Roaming\Aduna\OpenRDF Sesame Console\templates
By reading the Sesame doc and according to this page (http://www.openrdf.org/doc/sesame2/users/ch07.html) I suppose that I have to add in the "C:\Users\<Username>\AppData\Roaming\Aduna\OpenRDF Sesame Console\templates" directory a file based on this template :
# Sesame configuration template for a main-memory repository
@prefix rdfs: <http://www.w3.org/2000/01/rdf-schema#>.
@prefix rep: <http://www.openrdf.org/config/repository#>.
@prefix sr: <http://www.openrdf.org/config/repository/sail#>.
@prefix sail: <http://www.openrdf.org/config/sail#>.
@prefix ms: <http://www.openrdf.org/config/sail/memory#>.
[] a rep:Repository ;
rep:repositoryID "{%Repository ID|memory%}" ;
rdfs:label "{%Repository title|Memory store%}" ;
rep:repositoryImpl [
rep:repositoryType "openrdf:SailRepository" ;
sr:sailImpl [
sail:sailType "openrdf:MemoryStore" ;
ms:persist {%Persist|true|false%} ;
ms:syncDelay {%Sync delay|0%}
Do anyone have the correct template ?
I didn't find any other thread about this problem, so I supose it's an easy issue to solve, but the Semantic Technologies are totally new for me.
Arthur

I finally find the answer to my question. The template used in the tutorial is present in the sesame adapter.
I just had to extract the files into the "sdordfsesame.jar", the template is locate in "sdordfsesame.jar/org/openrdf/console/oracle.ttl".
After adding the "oracle.ttl" to the correct directory, it's work fine.
Arthur

Reseting page number in Word RTF template for BI Publisher PDF generation

Hi!
Apex 4.0.2, Oracle 10.2.0.4, BIP 10.2
Bills are created based on Word RTF file with BI Publisher. Reszulting file is one big PDF file, which has many pages.
Word RTF template is grouped on BILLS.ID field with page break option. So one BILLS.ID may have one or many pages (according data).
How to create RTF template (for PDF BI Publisher generation) with reseting page numbers when grouping value change.
Page numbers are in footer in format
curr_group_page/total_group_pages
where:
curr_group_page is current page number in group (defined with BILLS.ID field),
total_group_pages is total page number of pages in group (defined with BILLS.ID field).
I need to reset numbering whenever BILLS.ID (group) change.
Example:
ID=1 (4 pages)
1/4, 2/4, 3/4, 4/4
ID=2 (1 pages)
1/1
ID=3 (2 pages)
1/2, 2/2
ID=4 (3 pages)
1/3, 2/3, 3/3
etc.
How to achieve that kind of numbering?
Any help appreciated.
Regards,
Damir Vadas
Edited by: Damir Vadas on May 16, 2011 12:49 PM

Simple question.. Does your posting deal with an APEX issue or a BI Publisher issue? The posting you have deals with the RTF add-on for Word that builds report layouts for BI Publisher. I suggested in my response that you move it to a more relevant forum..
If you feel that me alerting you to the fact your are VIOLATING forum policy is an issue, please feel free to ask others their view.. (posting to a 3 year old closed thread, creating MULTIPLE threads for a single issue..) You do NOT seem to get the idea that posting this in the Bi Publisher support forum would probably get you a BETTER response than here.. Asking pl/sql questions here will also get people to refer your questions to the PL/Sql Support forum..
Also, here is a POSSIBLE answer from the BI Publisher Forum: http://forums.oracle.com/forums/thread.jspa?threadID=594805
This Is The APEX SUPPORT forum, we deal with SUPPORT questions on APEX (Application Express)..
Thank you,
Tony Miller
Webster, TX
You know, I used to think that it was awful that life was so unfair. Then I thought, wouldn't it be much worse if life were fair, and all the terrible things that happen to us come because we actually deserve them? So, now I take great comfort in the general hostility and unfairness of the universe.
If this question is answered, please mark the thread as closed and assign points where earned..

Creating Parameters in RTF Template for BI Publisher Report

hi,
I have created Parameters in my BI Publisher Report and in SQL query. But i need to create same parameters in RTF Template , so that when i publish this report in dashboard , parameters will be visible. Can you please tell me how to create Parameters in RTF Template for BI Publisher Report ? I am not finding option. Please let me know .
Thanks in advance
Gayathri.

all the parameter's value will be there in your xml .
just you need to add parameter heading and corresponding xml tag name to get the parameter value on the report.
if u dont have you can try like below
https://blogs.oracle.com/xmlpublisher/entry/get_your_parameters_here_guv
Declare Parameter in RTF Template
Before you use the parameter in the RTF template file you need to declare it first. You can do so by having the following syntax.
<?param@begin:%parameter_name%?>
Note: where %parameter_name% is the parameter name that you have created at the BI Publisher Server UI.
Here is an example:
<?param@begin:param1?>
Use it in RTF Template!
Once it’s declared in the RTF template you can start using it as the same way you use the variable. You need to just add ‘$’ prefix in front of the parameter name. Here is the example:
<?$param1?>
The above example would print the parameter value in the report output. If you want to use this value in your condition or calculation you can simply use it as ‘$param1’. Yes, it’s that simple.
If you are not sure if and how the parameter values are passed to the report when you run the report you can use this command in your RTF template, which will return all the parameter values passed to the RTF template at the runtime.
<?xdoxslt:getXDOProperties($_XDOCTX)?>
http://kirti-bi-solutions.blogspot.com/2009/06/passing-parameters-from-obiee.html

Fix Cheque position in RTF Templates for AP Payments R12

Hi,
I created rtf template for check printing. I have to print invoices details first and after that check at the bottom of the page. I need to print invoices on the cheque page only when total invoice count < = 3 which I am able to control. I am facing issue when for 3 invoices the table height is variable, depends on invoice description this table size is changing. How I can give the fixed-height for invoice table or how I can specify exact place for check (at the bottom of each page )
Thanks
Mital

Hi Prakhar,
Please note the cheque is not an image its in a table.
Even if I fix a table using table positioning in the output it doesnot print at the fixed position which I have provided in my RTF.
Please let me know if you would want to see the sample XML Data and RTF that I have created which can be easier to debug.
Thanks for your help,
Mital

Help with trying to locate Illustrator templates for CS version 1

I'm trying to locate a copy of the templates that were issued as part of Illustrator CS version 1. Specifically, I'm looking for a file by the name of "flyer3.ait". I would, ideally, like to access all of the templates for CS, version 1, because I am reading the Adobe Illustrator CS, Idea Kit book by Jerome Holder & Barbara Mulligan. and they use these templates as starter files for their book. Thank you in advance.

I really doubt that you are going to find them unless someone has a version of CS1 installed somewhere on an old machine. In the newer versions the template files are in a folder called Cool Extras which may or may not have been installed. Installation of this folder was an option in the newer versions. In AICS3, there is a template called flyer.ait in the above folder.

How do I create my own favorite template for DVD slideshows? I used to be able to select this from pulldown menu, but cannot now do so. I am directed straight to templates, which take more memory. I have a large slideshow, and need all the space I can get

First, how do I create my own favorite theme template for DVD slideshows? I used to be able to select this from pulldown menu, but cannot now do so. I am directed straight to already existing themes, which take more memory. I have a large slideshow, and need all the space I can get. I just want to use a picture as my DVD cover, and then insert a slideshow. Also, when I try to burn my 8.5gb double sided slideshow, all that burns is the music. It is a large slideshow, a memorial on the life of my now deceased brother. This means a lot to me and to my family, and I am having so much trouble trying to burn it. I have gone into Project View and selected appropriately. The bar shows I have room to burn this DVD, but it does not burn. I have burned so many DVDs in the past, but this one just will not burn. I am so confused at this point. I will say this is the first 8.5gb I have attempted to create and burn. My specs list a 7.7gb or 4.7gb as operable....but there are no 7.7gb dvds. I had to purchase 8.5gb. Help? What am I doing wrong? I have spent so much time on this, and just cannot figure it out.

Final Cut is a separate, higher end video editor. The pro version of iMovie.
Give iPhoto a look at for creating the slideshow. It's easy to assemble the photos in an album in iPhoto, put them in the order you want and then make a slideshow of them. You can select from various themes and transitions between slides and add music from your iTunes library.
When you have the slidshow as you want use the Export button at the bottom of the iPhoto window and export with Size = Medium or Large.
Save the resulting Quicktime movie file in your Movies folder.
Next, open iDVD, choose your theme and drag the QT movie file into the menu window being careful to avoid any drop zones.
Then follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
The reason I suggest iPhoto is that I find it much easier to use than iMovie (except for the older iMovie 6 HD version). Personal preferences showing here.

Invite Template for WebEx TelePresence Meetings (TMSXE)

Similar Messages

Maybe you are looking for