Invoice Archiving using IXOS

Dear all,
We are planning to do invoice archiving using IXOS server. please let me know the steps and processes involved in archiving.
Is any documents available in forum with step by step process to perform the archiving actiivity.
any help on this would be appreciated.
Thanks.
Regards,
Mohankumar.G

Hi Mohan,
I am not sure whether you will get a step by step process for your query. But here are some tips and links which might help you.
The process for document archiving involves some customizing on the SAP side and also on the external storage side, in your case Ixos.
For customizing in SAP, in the implementation guide (SPRO), follow the path SAP NetWeaver -> Application Server -> Basis Services -> ArchiveLink. There are several groups of customizing to be done depending on the scenario; Basic customizing applies for all scenarios. For documentation on the various scenarios, refer SAP help Link: [http://help.sap.com/saphelp_erp60_sp/helpdata/en/3b/6b9b3c874da309e10000000a114027/frameset.htm]
For information regarding the customization on Ixos side, you may have to refer to Ixos documentation.
Hope this helps,
Naveen

Similar Messages

  • What process has been used to Void/Reissue a Check after Invoice Archived?

    We have archived using FI_DOCUMNT for data older than 2 years.  There are outstanding checks that our Accounts Payable people need to Void and Reissue, however to do so requires re-opening a cleared/closed invoice that was just archived. 
    Anyone have a work-around for this situation? 
    Thanks,
    Colleen

    Hi Colleen,
    Normally you don't void/re-issue such an old check. Check is normally invalid after a certain time (mostly 6 months). If the checks are not-encashed, the amount is paid to the Government as unclaimed property.
    But if you have not paid the amount to govt. and for some reason you want to pay an old archieved invoice through check now , one of the option will be to pay through Zero net liability postings if your accounting dept is OK with that.
    Cr Vendor A/c
    Dr Check Clearing (Outgoing) A/c
    You have debited the Check Outgoing, because this liability is carried forward orginally from this account, which you have not cleared since 2 years.
    Do the manual check payment with following postings:
    Dr Vendor A/c
    Cr Cash A/c
    Thanks
    Ron

  • Use TREX to index /search archive on IXOS?

    I wonder whether TREX can index/search archives on IXOS.
    Could anybody share experience here?
    Thanks!

    Hi Eric,
    Using SAP Netweaver Enterprise Search you can search content from ERP, BI, KM, File Search, Business Object Search, Search in Webservice etc., for more information please go through this URL
    https://websmp209.sap-ag.de/nwes70
    Please provide points if this helps you

  • Invoice Archiving

    Hi,
    We have this Invoice archive functionality set in our system (Documentum is used). After checking the configurations, I came across this parameter Storage Mode present in the definition of the Output type (Storage system tab).
    And as per my understanding, the invoices having the above output type will be printed and Archived as well. However my question is how does one know the triggering point of Archiving of the invoice. Do we need to write a program which will archive the invoice or is it a SAP standard functionality that once the billing document is saved, the invoice will be archived immediately ?
    Please provide some inputs.
    Thanks,
    Himanshu.

    Hi  Himanshu
    Go to VF02->select the output and click on communication strategy, there you can check wheather archive has been checked or not.
    Please check the following threads which will should your query.
    http://forums.sdn.sap.com/thread.jspa?threadID=790986
    http://forums.sdn.sap.com/thread.jspa?threadID=1569131
    http://forums.sdn.sap.com/thread.jspa?threadID=1934637
    http://forums.sdn.sap.com/thread.jspa?threadID=1384520
    Regards
    Srinath

  • Hello and HELP! Over the years I have saved Invoices in my Documents. I have just tried to open them and all I am getting is " cannot be opened, Invoice**** is used by another user, do you want to make a copy?" That's on all my invoices.

    Can someone help please.
    I have just "lost" ( cannot open) all my saved Invoices in the Document folder.  All I am getting is " cannot open, Invoice ** is used bey another user, do you want to make copy? " That doesn't work either. I can't get anything on the time capsule either. How can I reset to an earlier time? Or what can I do?
    Thank you

    Did you recently reinstall the OS then copy all your files back over? Do a Get info on one of the documents and see if your current UserName is listed and has Read & Write permissions. If not select the Documents folder and check that for Read & Write permissions for your UserName. If it doesn't have R & W permissions Add it so it does.

  • Loading a text file in a gzip or zip archive using an applet to a String

    How do I load a text file in a gzip or zip archive using an applet to a String, not a byte array? Give me both gzip and zip examples.

    This doesn't work:
              try
                   java.net.URL url = new java.net.URL(getCodeBase() + filename);
                   inputStream = new java.io.BufferedInputStream(url.openStream());
                   if (filename.toLowerCase().endsWith(".txt.gz"))
                        inputStream = (java.io.InputStream)(new java.util.zip.GZIPInputStream(inputStream));
                   else if (filename.toLowerCase().endsWith(".zip"))
                        java.util.zip.ZipInputStream zipInputStream = new java.util.zip.ZipInputStream(inputStream);
                        java.util.zip.ZipEntry zipEntry = zipInputStream.getNextEntry();
                        while (zipEntry != null && (zipEntry.isDirectory() || !zipEntry.getName().toLowerCase().endsWith(".txt")))
                             zipEntry = zipInputStream.getNextEntry();
                        if (zipEntry == null)
                             zipInputStream.close();
                             inputStream.close();
                             return "";
                        inputStream = zipInputStream;
                   else
                   byte bytes[] = new byte[10000000];
                   byte s;
                   int i = 0;
                   while (((s = inputStream.read())) != null)
                        bytes[i++] = s;
                   inputStream.close();
            catch (Exception e)
              }

  • SRM PO failed: Indicator for GR-based invoice verification used not allowed

    Hi Friends,
        I have an issue with a specific PO failed to transfer from SRM to ECC. We are in ECS scenario, SRM 5.0 Service level 7.0. We are in process of SP upgrade but this issue occured in Production system which is still in old SP level(SP 7.0).
    when I check the App Monitor, I am see the following errors:  but the status shows Auto_Completed
    1. PO: Indicator for GR-based invoice verification used not allowed
    2. PO: Instance XXXXXXXXXX of object type PurchaseOrder could not be changed
    3.  PurchOrder XXXXXXXXXX: Purchase order still contains faulty items
    4.  PO XXXXXXXX: Indicator for GR-based invoice verification used not allowed
    I can see the PO copied over to ECC. but status in SRM PO shows 'Error in Process'.
      BBP_PD for object PO shows:  Created, complete, ordered, In Transfer to Execute, Change was Transmitted  as Inactive status.    Transfer Failed shows Active, Document completed, created.
    I checked BP Maintain  for the vendor and PO and its no different than other POs and Vendors except Vendor had 'Goods Receipt based Invoice Verification' indicator checked in SRM.
    I tried to simulate the same Material, Vendor with GR-IV indicator both on and off, it works fine. Ofcourse this is in Quality box with SP 15 level.
    So, I am not sure if SP level upgrade might help it or not? If there are any other means to test, please advise.
    thanks
    Rao

    I was wondering how I could liquidate the PO by either creating a new PO or ??.
    What you could do to revive the PO in question is that after the upgrade, and after a round of background jobs run for CLEAN_REQREQ_UP and BBP_GET_STATUS_2, ask the buyer to make a dummy change to the PO (for example, change the description of the PO) and order again. This would trigger the transfer to the backend again. And hopefully this time, no error would occur.

  • HT1277 I have quickbooks software. I am traveling. I tried to send an invoice out, using the mac email (version 5.3) I can't send the mail out. I get a pop up asking for my password, I put the password in and it does not accept it.

    I have quickbooks software. I am traveling. I tried to send an invoice out, using the mac email (version 5.3) I can't send the mail out. I get a pop up asking for my password, I put the password in and it does not accept it. This is the 1st time I've had this problem.
    slpmtns

    Whilst it may not be your fault I am afraid it appears that your post is on a forum which is not the best for your OS. It will save the time of the unpaid volunteers here, and may resolve your issue faster, if you could examine the list below and see if there is a more appropriate forum to which you could direct your question.
    OS X 10.9 Mavericks
    OS X 10.8 Mountain Lion
    OS X 10.7 Lion
    OS X 10.6 Snow Leopard
    OS X 10.5 Leopard
    OS X 10.4 Tiger
    OS X 10.3 and earlier
    OS 9, OS 8 & System 7
    OS X Technologies
    OS X Server
    iPad
    iPhone
    iPod
    Other

  • Report to post a parked invoices parked using transaction  MIR7

    Hi Experts,
    I have a requirement of developing a report that will post the parked invoices, parked using the transaction MIR7. While posting I need to check whether the invoice amount is in par with PO price. If there is any price variance, I need to assign the increased price to a different G/L account.
    I understand that I should use the Function Modules 'MRM_INVOICE_READ' and 'MRM_PARKED_INVOICE_POST'. But it is not working for me. Forget about assigning the PO variance to different G/L account, I am unable to even post a simple parked invoice using these function modules.
    The invoice data, especially item data (ti drseg), is not sufficient to populate to 'MRMPARKED_INVOICE_POST'. Some one help me how to fill the internal table ti_drseg so as to pass it to function module 'MRM_PARKED_INVOICE_POST'.
    Please provide me if any standard reports are available  to post the parked invoices.
    Thanks,
    Naresh Babu Kandula.

    Hi,
    maybe something like:
    REPORT  zz_post_parked_invoice.
    TYPE-POOLS: mrm, mmcr.
    DATA: l_t_rbkpv TYPE mrm_rbkpv,
          l_t_drseg TYPE mmcr_drseg OCCURS 0.
    DATA: i_belnr LIKE bkpf-belnr,
          i_gjahr LIKE bkpf-gjahr.
    PARAMETERS: p_belnr LIKE rbkp-belnr,
                p_gjahr LIKE rbkp-gjahr.
    START-OF-SELECTION.
      i_belnr = p_belnr.
      i_gjahr = p_gjahr.
      CALL FUNCTION 'MRM_INVOICE_READ'
        EXPORTING
          i_belnr         = i_belnr
          i_gjahr         = i_gjahr
        IMPORTING
          e_rbkpv         = l_t_rbkpv
        TABLES
          t_drseg         = l_t_drseg
        EXCEPTIONS
          entry_not_found = 1
          OTHERS          = 2.
      IF sy-subrc NE 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      CALL FUNCTION 'MRM_PARKED_INVOICE_POST'
        EXPORTING
          i_rbkpv  = l_t_rbkpv
          ti_drseg = l_t_drseg.
      IF sy-subrc NE 0.
        ROLLBACK WORK.
      ELSE.
        COMMIT WORK AND WAIT.
      ENDIF.
    check also function module FM_FI_MM_PP_POST in include LF0KJF01.
    Best regards.
    Edited by: Pablo Casamayor on Jan 28, 2010 4:16 PM

  • Vendor invoice creation using BAPI BAPI_ACC_DOCUMENT_POST

    Hi,
    I am trying to create vendor invoice(FB60) using BAPI_ACC_DOCUMENT_POST.
    Could anyone please let me know what all mandatory fields we have to pass in vendor item and header to create this ?
    Regards,
    Anubhuti Pandey

    Hi,
    Please call the FM BAPI_ACC_DOCUMENT_POST and try with the following parameters:
    Function module to post the accounting document
          CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'           
    "      EXPORTING
              documentheader    = w_documentheader                                          
    "      TABLES
              accountgl               = i_accountgl
              accountreceivable = i_accountreceivable
              accountpayable     = i_accountpayable
              currencyamount    = i_currencyamount
              return                     = i_return
              contractitem           = i_contractitem.
    The required fields in the header document:
        w_documentheader-bus_act    
        w_documentheader-username    = sy-uname.                                             "Username
        w_documentheader-header_txt 
        w_documentheader-comp_code 
        w_documentheader-doc_date  
        w_documentheader-pstng_date  = sy-datum. 
        w_documentheader-trans_date                                 " Transaction date value as per document date
        w_documentheader-fisc_year   = sy-datum(4).      
        w_documentheader-doc_type      
    Pass the necessary information in the account GL and accounts payable.
    I hope this helps you in some way.

  • Accessing a File within a zip, which was archived using Applet Tag

    Hi,
    Could Any one please tell me, How to Access a File from within an Applet. The File resides inside a zip which was Archived using <Applet> Tag.
    Actually, I want to write an application which runs both online and offline. So I have chosen Applet and All the files Which I need are zipped and is Archived through <Applet ARCHIVE="example.zip">.
    Now I want to access those XML files which are inside example.zip from my Applet.
    How can I do that?
    I think I will get security Exception.
    How to get rid of this security Exception.
    Kindly Answer soon.......
    It's very urgent.
    Thanking you,
    KumudaRaj

    Did you already try signing a jarfile? If no ->>
    You can call a class inside a jar-file within the applet.
    if this class should be able to acces files the jarfile
    first has to be signed. to do this, you must generate a key.
    the complete work:
    1. write your applet
    2. write a html-page with following code:
    <APPLET code="guestbook.class" archive="guestbook.jar" width=600 height=400></APPLET>
    3. make a zip-file with the guestbook.class, guestbook.form, guestbook$1.class, guestbook$... and rename it to guestbook.jar
    4. in the console type:
    keytool -genkey -alias YOURNAME
    5. sign the key to your jarfile with:
    jarsigner guestbook.jar YOURNAME
    6. try the applet. a warning should appear which you have to answer
    with YES then it should work
    my trouble is that i cant acces files anyway because right now i don�t
    alreadv have the clue to get the right (absolute?) path for the file. means i get an ioexception because the applet cant find the file :-((
    does anyone know how to solve this problem then? my code is:
    FileReader Stream = new FileReader("/members/Ui97u8g4f6b89mj90kh5gbr4ecf6KXC4/guestbook.txt");
    ...

  • Posting invoice discounts using RFBIBL00

    I am generating a file to be processed by the program RFBIBL00 to clear incoming invoice payments using transaction FB05.  The input file being supplied by the user already has the cash discount identified in a separate field.  Can someone tell me which field(s) of BBSEG I need to move this amount into so that it fills in the 'Cash Discnt' field of the 'Post with clearing: Process open items' screen?

    Not offhand, but you can press F1 on the cash discount field and get the technical information (including the field name). Then go to BBSEG and see if that field name is there.
    Rob

  • Excise Invoice no. using Material document no.

    Hi Masters
      How to find Excise Invoice no. using material document no.(In my case it is GR No.)
    Regards
    Mohan

    Hi,
    Use: J1I7 , In selection range you can give Excise Group, Excise Transaction Type as GRPO , Vendor Number, Material Document , Material or Purchasing Document , select  Part 1 and part 2 Posted , Off.No is Excise Invoice No entered at the time of Excise Capturing.
    Regards,
    Vikas

  • A/R Invoice + Payment using DI API

    How can we create an A/R Invoice + Payment using DI API ?

    Hello,
    You (should) create a A/R invoice first, then you can create a payment based on the invoice.
    or If you create the payment first later the invoice you should reconsile the 2 transactions.
    Regards,
    János.

  • Problem in process instances Archiving using NetWeaver (CE 7.2)

    Hi,
    I'm configuring the process instances Archiving using NetWeaver Composition Enviornment 7.2.
    I followed the document "Process Archiving using NetWeaver Business Process Management".
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e099ee21-6e1a-2e10-4d91-eb278c0dcdb8#rating
    There is a problem when I configure Archive Destination using XML DAS Administration. I define the new archive store with the parameters as in the document but I get error.
    I attach screenshot with the parameters and the error in the next URL: http://www.esnips.com/web/XMLDASAdministration
    Thanks in advance,
    Samantha

    In the screen shot I could see you have configured both for Windows and Unix root. depends on your system please choose one. also set this as the default archive store.  Makre sure the share folder  has shared .

Maybe you are looking for