Invoice automatic mailing to customer

Hi all,
Please help me in the issue . I want to mail Invoice generated(VF01) should be automatically sent to the customer Can anyone please guide me to acheive the same.
Thanks in advance,
Edited by: Eric de on Jun 10, 2010 11:02 AM

Hi,
You can use the FM CONVERT_OTFSPOOLJOB_2_PDF to convert the OTF file int o PDF and then use the SO_NEW_DOCUMENT_ATT_SEND_API FM to send the email.
Also refer the below link for more details.
http://help.sap.com/saphelp_nw2004s/helpdata/en/a5/28d3b9d26211d4b646006094192fe3/frameset.htm
~Vaas

Similar Messages

Automatic clearing of customer invoice

how to configure automatic clearing of customer invoice against payments received.

Hello,
Create a rule in the OB74, whether you want to clear the customer invoice based on XFER (Reference) or ZUONR (Assignment). Then on a periodic basis, like monthly once you can run the transaction F.13 to clear the customer invoices against the payment automatically.
Can you see the test run result and the run it in live mode.
Hope this will help your requirment.
Raja.A

How to generate customer invoices automatically?

We are doing direct debit for some of our clients based on the billing plan.
I know that it is possible to create customer invoices automatically based on the billing plan, but do not know the details how to trigger the process.
Imagine I have created the billing plan for the billing WBS-element. What should be done next to post the customer invoice automatically?
Many thanks for your help!

Hi Mrinal,
I do not know much about SD process, in fact I am mostly interested in FI invoices to be generated and posted while having the most dummy SD flow possible.
What exactly does VF04, what are prerequisites to run it, and what are the follow up steps? My starting point is the billing plan maintained for the WBS-element, while the target is FI customer invoices posted, so what are the missing steps in between?
Many thanks.

How to mail invoice as pdf to customer

hi all,
i have to send a copy of the invoice as a pdf to the customer through mail, request you to kindly guide me how to configure this in the system.
thanks & regards,
padmanabhan

Hi,
SAP have created a standard program RSTXPDFT4 to convert your Sapscripts spools into a PDF format.
Specify the spool number and you will be able to download the sapscripts spool into your local harddisk.
Please note that it is not restricted to sapsciprts spool only. Any reports in the spool can be converted using the program 'RSTXPDFT4'.
1.Run the program RSTXPDFT4 in se38
2. Give the spool number and mention the directory and filename where to want to store the pdf file
3. press execute
MAIL: to Configure the Mail settings in the Tcode SCOT with the help of a basis person
and use the Medium as MAIL (7) instead of 1(printout)
and see that the receipient mail id (customer) are maintained properly and it should fired in the driver program..
Just we have to check the Output from the fun module
ADDR_GET_NEXT_COMM_TYPE which is there in driver program
Reward points if useful
Regards,
Govind.

Output--- automatic mail is not firing to sold to party.

Dear Gurus,
My client requirement is to sent mail to sold party when saving a sales order.
For this I creted a new output type with following assignments
In General data tab:acess sequence assigned and Access to conditions is checked
In Default values tab: Dispatch time(send immadiately), transmission medium(External send), partner function(Sp
),Communication strategy(CS01) assigned.
In Time tab: no information given
In Storage system tab :Storage mode(print and archive),Document type(SDOORDER) info given.
In Print tab: print parameters(sales org) assigned.
In mail tab: nothing assigned.
In sort order tab:nothing assigned
In mail title and texts: En and DE languages are assigned.
in processing routines: program and form routine is assgned.
in partner functions: External send+ SP is maintained.
and in condtion record maintained in VV11 tcode with details
Partner function and in communication assigned printer and selected check box print immadiately and release after out.
But automatic mail is not firing when saving the sales order, but in change sales order in menu bar selected sales document and issue output to and selected print then mail is firing to the sold to party, pls tell me where i had done the mistake.
Rgrads,
kishore.
Edited by: kishore gopala on Sep 13, 2008 1:42 PM

Check whether you have maintained the email address in the customer master of Sold to party in the General Data>Address Tab> Under Communication Area??
In the SCOT Transaction, check under SMTP (SMTP Mail Server)-->under INT (Internet) --> an '*' asterisk has been maintained or not.
Check the status of the email output in the Sales Order, is it showing with a green traffic light???
If it is showing with a green traffic light you can manually see the status of the mail mesages in Transaction SOST.(by executing, by putting the Sender Id)
If they have not gone you will be able to see them queued up there.
Select the individual messages and press execute button. By doing this email outputs will be released.
Hope this helps you.
Caution: One word of caution is that SCOT is a very critical transaction. And if you are working on a live server, do not play with it as it controls the entire SAPconnect Administration Nodes.
Hope this helps.
Regards,
Vivek

Problem in Automatic mail generation after shipment creation in vt01

Hi All,
In VT01 Automatic mail generation to customer whenver a new shipment is created & in from address user mail adderess is mentioned but in my requirements i have to mention different mail id in user mail address.
how can i do this?
please give me ur suggestions.
Thanx

Hi...
When user close the shipment ,then he gets a mail on his id automatically generated from sap system.
he want this mail should come to the mail id of his colleague.
Pls reply asap.
Thanx
Vj

Down Payment Adjust to Invoice Automatically?

Hi,
Is there any way or work around to clear vedor/customer down payment to vendor/customer invoice automatically without transferring Spl GL amount to Invoice?
Generally we will post down payment and then invoice and after that we will transfer down paymetn amount to invoice and then will clear the invoice.
With out doing manual clearing of down paymetn, isit possible to automate it?
Please hlep me
Thanks
yadayya

Hi
As per my understanding the query relates to adjusting downpayments at the time of invoice verification itself.
Once invoice verification is done anyway we can clear manually or automatically either by clear downpayment or clear vendor.
regards,
Amanullah

Release and/or Post Logistic Parked Invoices automatically

Hi there,
I was wondering if anyone knows how to release and/or post Logistic Parked Invoices automatically in R/3.
The Logistic Invoices are created using BAPI_INCOMINGINVOICE_PARK and are displayed in transaction MIR7.
I need to find a way to process and POST dozens of parked logistic invoices at once.
Any help would be appreciated.
Thanks,
Efrain

Hi Srinivas,
Thanks for your answer. It partially worked for me. I executed MR44 and I was able to see a parked logistic invoice with reference to a PO (with standar Doc. Type RE). However, if I use a "Z" Doc. Type, then is not displayed there.
Maybe there is something behind the program SAPLMR1M (MIR7) where Doc. Type is being filtered. I will take a look on Customizing and see if I can find something.
Once again, thanks for your help.
Regards,
Efrain.

Automatic clearing of Customer Advance Payment

I want to perform the following scenario
Scenario: At the time of entering advance payment there should be a reference field e.g. contract number etc. And this reference field should also appear while entering invoice in the system. This reference field will be used to clear the advance payment with the respective invoice automatically.
i am doing following steps to perform the above scenario
Posting Advance Payment through t.code f-29
then entering the invoice through t.code. fb70
then clearing both the transactions through f.13
is this a right procedure which i am following or is there any better solution for the above scenario

You should use below for customer advance process:-
- Posting Advance Payment through t.code f-29
- then entering the invoice through t.code. fb70
- then clearing both the transactions through F-39
Regards,
SDNer

IDOC - Automatic Mail Sending

Hi All,
Basically I need to remove the automatic mail sending feature in the IDOC, please give me the solution, whether it is standard functionality, or is there any user exit to avoid.
If it is a Standard functionality then mention the Std. Program name or
If it is from userexit then plz mention the Exit name.
Thanks In Advance.

think u need to check tcode swu3 for automatic workflow customizing and check in we40 (error AND STATUS PROCESSING) whether the processing code is assigned to the workflow task.
if it is assigned,the workflow will be automatically triggered and the mail will be sent to the user by itself.
ALE error handling uses workflow. A standard task is provided for each message type. Task TS20000051 is used for all BAPIs.
Workflow functions as follows:
A task (work item) is generated for the error handling and stored as a message in the inboxes of the employees responsible.
If one of these employees processes the work item, the standard task method for error handling is started. The user can, for example, restart IDoc processing.
If the IDoc is processed successfully, the work item is deleted from the inboxes of all the employees involved.
For this procedure to function, the employees responsible for a particular message type and partner (sender or receiver) must be defined as follows:
1. A hierarchy of organizational units (for example, "sales office") and positions (for example, "customer officer for customer X") is created and employees are assigned to it.
2. The standard tasks for error handling (for example, an error related to an inbound sales order) are assigned to the relevant organizational units or positions (for example, "sales office").
3. The organizational unit, position or employee responsible for dealing with the error are specified for each partner and message type in the partner profiles.
If an error occurs, the system determines:
1. The employees responsible using the staffing schedule of the organizational unit or position linked to the standard task.
2. The employees defined in the partner profiles (using position, user ID, or organizational unit).
3. The employees appearing in both groups represent those who will receive a work item in their inboxes.
Please give me reward point If it is useful
Thanks
Murali Poli

Multiple deliveries getting combined into one invoice automatically by job

Hello All,
I'm facing issue, multiple deliveries are getting combined in one invoice automatically. The invoices are created by background jobs. It should not combine the multiple deliveries into one invoice ideally as it is being created by background jobs. Could any one please share what might be the cause of it.
Thanks in advance.
Regards,
Sumit

Hi
When you run the dialog or batch billing job the prgram SDBILLDL is triggered.
It simply reads the billing due index (VKDFS) and retrieves all due documents
for processing (internal table V60P_INPUT_VKDFIF)
The program in the standard processes 1000 entries at a time as required
and if each entry processed passes the split criteria (outlined in note 11162)
The system could in theory create one invoice for all 1000 entries picked up.
You see this processing here:
CALL FUNCTION 'SD_COLLECTIVE_RUN_EXECUTE'
LOOP AT V60P_INPUT_VKDFIF WHERE SELKZ NE SPACE.
    ON CHANGE OF V60P_INPUT_VKDFIF-KUNNR OR
                 V60P_INPUT_VKDFIF-VKORG OR
                 V60P_INPUT_VKDFIF-V_FKART.
      IF COUNTER > 0.
        CLEAR SY-CALLD.
        DELETE ADJACENT DUPLICATES FROM XKOMFK.
              PERFORM RV_INVOICE_CREATE                         >>>>>
As you see above, the system tries to bill all entries together
where the customer, sales org and billing type are the same.
It will do this 1000 times before it forces a split.
(you will also notice user exits here which can be used to change this
outcome)
Check note 11162 for the details of what header fields will cause a split.
As outlined previously you could use an item data transfer routine and the field
ZUKRI to force a split on your own terms.
Hope this helps explain the system behaviour
Kind regards
        PERFORM RV_INVOICE_CREATE                                       >>>>>>

Automatic mailing in STMS tcode.

Hi all,
I need to generate automatic mail when the request number transported from Development server to Production server. In STMS, there is no User exit, customer exit and BADI. Can anyone hep me.
Rgrds
Lakshmanan

Hi,
I think there is some standard work flow available for this requirement.
Please follow this document..this can help you.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCTSTMS/BCCTSTMS.pdf
Regards,
Naresh.

Automatic Mail not getting generated through background job

Hi Experts,
We have set up a job variant with spool recipients. We are getting the automatic mail if the job is getting finished successfully. But we are not getting the automatic mail if the job is in cancelled status. Earlier we used to get the mail even if the job is in cancelled status. We are not sure if there is any setting which would restrict the automatic mail based on the job status.
Appreciate your help in this regard.
Thanks and Regards,
Ranjani.

Hi,
Just for a work around, try checking the SAP user inbox for the user who has scheduled the background job.
I don't there is any seperate configuration in Spool List Recipient for the canceled jobs. We need to confirm that the email ids provided in the Spool List recipient are correct and the background job creates a spool request even if it is canceled.
Also if possible try deleting the existing background job and create a new background job with the same parameters and valid email id's maintained in the Spool List recipient.
OR
Without deleting the existing background job, parallely create a new background job with the same parameters and valid email id's maintained in the Spool List recipient. If it works then delete the old background job.
Thanks
Harish

Creation of excise invoice automatic.

Hi All,
I have an one doubt. i have done setting for creation of excise invoice automatically.
Here is only one excise and series group.
So when i do the domestic sale, excise invoice gets created automatically but when i do the export sale and create the commercial invoice , excise invoice does not create automatically.
Is it happening because we are using same excise and series group or some thing else?
Note- If i remove the automatic setting and create the excise invoice seperately in both scenario, it is getting create.
Jalaj

Hi
There is some basic requirements to create the automatic Excise Invoice like :-
A) Specify the CENVAT account which should be posted on creation of excise document.
B) Under which Excise Group and Series Group the Excise Invoice should be created.
In your case to create automatic Excise Invoice you need to maintain separate Excise Group and Series Group, as for Export we also need to maintain separate no. range (not necessarily) and normally we also have different Billing Type.
So do the separate setting and then try to create automatic Excise Invoice.
Regards
Amitesh

How to stop excise invoice automatic generation

Hai Gurus,
Even after removing create excie invoice automatically indicator and deleting the default excise group entries, still excise invoice is getng generated automatically. Is there any way to stop this other than applying any note?? In our case, for deemed exports , we are not able to change excise invoice to deemed exports f

Is there any way to stop this other than applying any note??
Not necessary. I feel due to some user exit, system is generating the excise invoice automatically. To reconfirm this, generate one more billing document in DEBUG mode and see from where system is triggering.
thanks
G. Lakshmipathi

Invoice automatic mailing to customer

Similar Messages

Maybe you are looking for