Invoice entry for Blanket PO - Reg.

Dear all,
I can't able to enter invoice for a blanket PO. Because I have to enter G/L account number. But the optio to enter G/L account is greyed out in the system. I can't able to enter the G/L account no.
How to configure the same in the system. Plz do the need ful at the earliest.
regards,
Chandramohan.N

PO has to be created with item category B(limit).
item category B is usually allowed with account assignment U (Unknown) and K (Cost Center
if we want to use account assignment U, then make sure that this account assignment type allows Change in account assignment during Invoice Receipt.
I have selected the K then it will open automatically.
If u have selected U then u have to confirm in the customisation in
spro>purchasing->acct assn cat-> maintain acct assn cat-> U----> check the field IR changable is ticked.
If further doubts are there pl mail to [email protected] I can send the total presentation for the same.
pl reward if usable

Similar Messages

Invoice verification for blanket PO with account assignment category U (un

Hi all
While doing miro when i am doing invoice verification for blanket PO with account assignment category U (unknown) system is not allowing me to enter the GL it is disable,wat can be the possible reason
Regards
shailesh

Hi Shailesh,
As you have maintained the account assignment category as U the account assignment tab will not be available. If you want to enter a GL account then use the Account assignments K or F or X.
Else if you want to use U in PO then you can give the GL account and other account assignment details only in the Invoice verification.
Regards,
Kathir

Blanket PO Process: How to block (Ok) invoice Documents for payment

Hi,
There is a requirement to block the invoices created through Miro even if the Blanket PO value and Validity is honoured.
The user wants to release all the invoices through MRBR which also meets the PO value limit and validity limit.
The Invoice blocking for PO value and Validity exceeding is working fine.
I have explored OMR6 but failed to see this kind of invoice blocking for Blanket Po' s.
Regards,
Abhilash

Hi
To Block Framework Order PO Invoice if exceeded.- Set up a tolerance key "LA" in the transaction OMR6 for your company code, but this limit checkdoes not work with parked invoices.
Check the note : 134976
Regards
Anand

Accounting Entry for Depot Excise Invoice

Hi Gurus
We make a STO from factory to depot. I have posted the depot excise invoice via J1IJ but Im unable to see the accounting entry for the excise invoice..
Im able to see the acounting entry for excise invoice for factory sales thru J1IIN..
Pls advise
Rgds..Vinz

Hi Vinz,
I would like to explore more for ur info.
When u create Excise invoice at Factory Using J1iin, accounting entries flow to the system. When u transfer it to Depot, u credit the Excise amount using MIRO and post it to RG23D ( Depot Register)
The value of the excise for which u have taken credit from ur factory would be passed on to customer now.
If you notice carefully, when u take credit of Excise entry in RG23d No accounting entry flows in the system, only value & qty gets updated to Register.
Generally, while deciding the selling price from depot u consider Basic price + Excise duty. since u are passing on the excise benefit to customer, using proforma excise invoice (transaction J1IJ)
So there is no wuestion of accounting entries.
Hey CIN Gurus.. correct me if i am haveing any misconcepts regarding this.
Hope this is clear to you now..
Reward if helpful..

Accounting entries for excise invoice for purchase returns in J1IS

Dear Friends
1) I recorded an excise invoice for goods receips in J1IEX . The accounting entry is
Input BED a/c   DR
Input ECS a/c   DR
Input H.css A/c   DR
CENVAT clearing   CR
2) There were some damaged items and same returned to vendor. I did RETURN Delivery in MIGO. The excise invoice in J1IS gives error " BALANCE IN TRANSACTION CURRENCY". Here I used Ref document type - MATD
QUESTION :
What is the Excise transaction type   for ' other outward movement' in J1IS to which I should assign the excise accounts   to reverse    (1) above. Is it OTHR or GPRO.
Thanks
kamala

Dear Mathews,
It is not capital goods. Also if I do a JV in J1IH, the entry goes and is as below :
Cenvat clrg   DR,   Input -BED /E.cess/ S.cess   CR
But J1IS does not save, though I have assigned all said accounts in 'Excise accts per excise transation'   for OTHR. Also I read in wiki that the entry for purchase return excise inv in J1IS is ' CENV CLRG ....DR ,   CENV RECEIVABLE ...CR ' .If so, then do i creat new GL for Cenv Receivable ? What is its effect on FORTNIGHTLY UTILIZATION
thanks for telling
kamala
Edited by: Kamala Surianarayanan on Mar 6, 2009 6:38 AM
Edited by: Kamala Surianarayanan on Mar 6, 2009 6:38 AM

Accounting entries for a Project purchase order - reg

Hi,
I am processing a purchase order with Account assignment category as " Y " which requires a WBS element in the account assignment tab of Purchase order. A G/L account(XYZ) is defaulted in to the field G/L account under the tab account assignment.
There is no GR based invoice verification hence no Goods receipt (MIGO) is required for this purchase order.
When i am trying to process the invoice verification, the accounting enties are as follows
Vendor                         1000
GR/IR account              0.000
G/L Acct (XYZ)              1000
But in actual the GR/IR account will zero value should not be displayed in the accounting doucment.
Could any body suggest me how to eradicate the second non valuable entry duirng invoice verification in MIRO transaction.
Please expedite.
Regards,
RitiG

Hi
Can you check account assignment category Y with P - is there anything uneven?
I hope you are doing PO based IV - it means when you check Goods receipt tab in PO item details delivery tab, invoice entries will be vendor (credit) and GR/IR (debit). In case Goods receipt indicator is not ticked, entries will be vendor (credit) and expense GL account (debit). Can you check both of these?
Thanks

How can I define the possible entries for "invoicing process" at fkkinv_ma?

At the transaction code fkkinv_ma, I fill in the fields "Date ID" and "Identification" but I have a problem with the field of "Invoicing Process". When I psh theF4 button, there comes no search help. What should I do? Should I define the possible entries first? If I should, how can I define the possible entries for "invoicing process"? How is the customization done?
Thanks in advance for the answers.

You have to define them in the IMG
Financial Accounting (new)
Contract Account Recievable and Payable
Business Transactions
Invoicing
Invoice Types
You have to set up a number range, decide what type of Financial transactions should not be invoiced -- like Dunning Charges
then you have to have a developer create the form and form class of invoice.

Wrong Accounting Entry for Rejection Excise Invoice through J1IS

Dear Experts,
When we are doing Rejection of Excise Invoice through J1IS, a wrong accounting entry is getting generated by system.
Where can I check the settings for Accounting Entry for Rejection Excise Invoice?
Thanks & Regards,
Reshma

Generally Excise Invoice for other invoice posting will be done through J1IV after creating Excise Invoice for other Movements in J1IS.
If Automatic Posting is activated against your excise group then you need not again to post J1IV. It happens along with J1IS.
By the by how you are returning Excisable goods through Return delivery with Original invoice 122 or through Return Purchase order 161 Movement type.
Have you entered Excise Rates BED, ECS and SECS in J1IS?
Elaborate in detail.

Please I Need Forms Personalization Help Reg AP invoice entry

Hi All,
I am new to form personalization,
my client wants do a form personalization for ap invoice entry form ,in that i need to check duplicate invoices and put those invoices into hold
I got a API which puts invoices in hold : ap_holds_pkg.insert_single_hold
and i have done a procedure with that API ,the procedure contains the conditions like checking the duplication and API
which i defined above
My doubts are what is the trigger event i have to take
is there any apps initialization required in a procedure
Thanks
SABR

This forum is for general Oracle Forms questions. Forms Personalization is a feature of the Oracle Enterprise Business Suite (EBS). Please post your question in the General EBS Discussion forum. If you have a general Forms question, by all means, ask it here! ;-)
Craig...

MIRO invoice verification for Service entry sheet

When trying to do invoice verification for Service entry sheet i am getting this below error pls guide me
Delivery note/service entry sheet 5000000150 does not exist
Message no. M8183

Hi,
You may be saves SES number and now SES is not released!
1st Just cross check PO history TAB of service PO(ME23N), did you have only service entry sheet number or you have service entry sheet number and material document( will be created after releasing SES) with 101 movement type.
You have created service entry sheet (SES) in ML81N and got SES number, so as to recognize the vendor performed service. Next step, you need to accept service by releasing SES( in ML81N by clicking green flag or if release strategy there for SES, you need to release SES in ML85) so that FI document will be created.
Once SES released, then you can do MIRO w.r.t SES only.
Check doc:
http://help.sap.com/bp_bl604/BBLibrary/Documentation/209_BPP_EN_FI.doc
Regards,
Biju K

Invoice for blanket po.

Dear Gurus,
I want materials to be ordered with open quantity. like frame work order I am creating with account assignment K & item category B limits. I could create a po. there is no GR for frame work order. when i try to post invoice using MIRO, amounts are not flown to invoice. Also if I put amount value manually, balance is not zero. so please let me know how to post invoice for blanket po.
Regards
MSR

In framewrok order pls maintain the header amount and item level amount then go for simulate, select account assignment from all information.
BR
Edited by: Sujoy on Jan 19, 2010 7:30 AM

SEPA - How to control payment method used for SEPA during invoice entry?

Hi,
To implement SEPA Credit Transfers, a new payment method must be created.
But this payment method will coexist with other payment methods that can be used for EUR payments between non-SEPA countries...
Is there a way to control during invoice entry that the user is using the right payment method? Thus, if the payment is to be made between two SEPA countries, is there a way to control that the payment method used is well the new SEPA payment method? These pmts would fall in error if OSS note 1406227 has been implemented (it creates a table that controls the validity of pmt methods per country of destination) but obviously, we want to control this before the payment run F110...
Or is it only controllable via a user-exit?
Thanks a lot!
Rgds
Vincent
Edited by: Vincent_Belgium on Dec 30, 2010 3:22 PM
Edited by: Vincent_Belgium on Dec 30, 2010 3:26 PM

Hi,
You need to Use User Exit MEVME001 in SAP as well please see the below link for more
http://www.sap-img.com/materials/price-difference-po-iv-vendor.htm
Regards
Ninad Kshirsagar

Reg. Entry for TAN Numbers...

Hi,
I have a query regarding the TDS certificate printing (using J1INCERT).
Where do i maintain entry for the TAN (i.e. "Tax Decution A/C of The Deductor").
Please advise.
Thanks in Advance,
Safi

Step 1
SPRO>Logistics General>Tax on Goods Movements>India>Assign Users to Material Master Screen Sequence for Excise Duty
In this screen in "User Screen Refernce" you need to enter the usres and save your entries.
After this setting in vendor Master data in WHT tab you will see a push button by name "CIN" on the application tool bar.
Press that to maintain the required details.
reward points if useful
sarma

How do I set-up sales tax in shopping cart as a single entry for entire invoice?

The only way I can see to enter sales tax is by making a separate entry for product and another one for sales tax on shipping. This make no sense to me and looks really bad.
Thanks in advance!!

Hi,
I'm afraid I cannot think of another way. However I'll leave this thread open to allow the community to offer any possible suggestions if a workaround has been found and applied.
Kind regards,
-Sidney

Background Journal entry for Incoming payment

Dear Experts,
Would you please help me in how to get the journal entry for an incoming payment entered as "payment on account".
The relationship map does not show this, but I can see the credit entry for the customer is passed.
same happens for incoming payment made for specific AR invoices.
SAP Doc says...
Result
An incoming payment document is created.
A journal entry that credits the customer and the tax accounts (if tax is involved), and debits the receivable account, is created.
The journal entries of the incoming payments and the paid invoices are reconciled.
The paid invoices are closed; they no longer appear in the Open Items list and in the Incoming Paymentswindow as documents for payment.
So how to check the journal entries for incoming payments.
Regards
Message was edited by: Suman Roy

Hi,
To see journal entry, drill down arrow at transaction no of incoming payment window.
Thanks & Regards,
Nagarajan

Invoice entry for Blanket PO - Reg.

Similar Messages

Maybe you are looking for